Engineering Commons^™

Temporal And Functional Cortical Aspects Related To Mirror Visual Feedback During Target-Directed Movement In Healthy And Stroke Individuals, Maryam Rohafza

Dissertations

Stroke is the leading cause of disability in the United States (American Heart Association, American Stroke Association) affecting 800,000 individuals annually (i.e., one person every 45 seconds). Therapy for stroke often uses repetitive task practice, which is difficult to perform for patients due to impairment. Mirror visual feedback (MVF) based rehabilitation uses the effect of observing the mirror reflection of volitional movement of one limb, to activate visuomotor brain areas that process movement of the opposite limb. In persons with hemiplegia due to stroke, exercising the less affected limb while observing its reflection, perceived by them as the motion of …

Characteristics Of Bi-Metallic Interfaces Formed During Direct Energy Deposition Additive Manufacturing Processing, Ryan Anderson, Jordan Terrel, Judy Schneider, Sean Thompson, Paul Gradl

PRC-Affiliated Research

Various additive manufacturing processes are being evaluated to reduce the time and cost for fabrication of low volume, complex, and multifunctional assemblies. This study evaluated two direct energy deposition processes for the fabrication of large bi-metallic structures. The materials evaluated were Inconel 625 and copper alloy C18150, which are used in various high heat flux applications. Inconel was deposited onto the C18150 substrate using blown powder and wire-fed processes. Complete bonding was obtained in both processes and the resulting interfaces were evaluated using microscopy and indentation testing. Differences were observed in the interface region suggesting the kinetic energy of the …

Characteristics Of Bi-Metallic Interfaces Formed During Direct Energy Deposition Additive Manufacturing Processing, Ryan Anderson, Jordan Terrel, Judy Schneider, Sean Thompson, Paul Gradl

PRC-Affiliated Research

Various additive manufacturing processes are being evaluated to reduce the time and cost for fabrication of low volume, complex, and multifunctional assemblies. This study evaluated two direct energy deposition processes for the fabrication of large bi-metallic structures. The materials evaluated were Inconel 625 and copper alloy C18150, which are used in various high heat flux applications. Inconel was deposited onto the C18150 substrate using blown powder and wire-fed processes. Complete bonding was obtained in both processes and the resulting interfaces were evaluated using microscopy and indentation testing. Differences were observed in the interface region suggesting the kinetic energy of the …

Characteristics Of Bi-Metallic Interfaces Formed During Direct Energy Deposition Additive Manufacturing Processing, Ryan Anderson, Jordan Terrel, Judy Schneider, Sean Thompson, Paul Gradl

PRC-Affiliated Research

Various additive manufacturing processes are being evaluated to reduce the time and cost for fabrication of low volume, complex, and multifunctional assemblies. This study evaluated two direct energy deposition processes for the fabrication of large bi-metallic structures. The materials evaluated were Inconel 625 and copper alloy C18150, which are used in various high heat flux applications. Inconel was deposited onto the C18150 substrate using blown powder and wire-fed processes. Complete bonding was obtained in both processes and the resulting interfaces were evaluated using microscopy and indentation testing. Differences were observed in the interface region suggesting the kinetic energy of the …

Stress Shielding In Cemented Hip Implants Assessed From Computed Tomography, Bharadwaj Cheruvu, Indresh Venkatarayappa, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Background: Aseptic loosening is the major cause of revisions for hip replacement. This mode of failure is often caused by stress shielding. Stress shielding in the femur occurs when some of the loads are taken by the prosthesis and shielded from going to the bone. There is little information regarding the stress shielding among cemented hip implants. Purpose: The purpose of this study is to investigate the effect of stress shielding on the proximal femur with a femoral prosthesis. Methods: A patient had undergone open reduction and internal fixation (ORIF) due to a comminuted reversed oblique fracture of the right …

Design And Implementation Of An Automated Oil Distribution System For A Homogenizer Machine In Gea Mechanical Equipment – Niro Soavi, Luca Gandolfi

Theses

This thesis shows the steps that have been followed and done in order to improve a critical operation of a technological process of the GEA Mechanical Equipment. The critical operation was the filling with different types of oils the homogenizing machine because it was characterized by a lot of inefficiencies and, in particular, by huge risks for job security. These critical issues gave the opportunity and the chance to realize a project in order to give a process optimization and security improvement.

After having faced all the aspects and steps needed for this project, it has been realized a system …

Mechanics Of Binder-Particle Interactions In Composite Battery Electrodes, Richard Johnson

Theses

A study into the particle level mechanics of polymer binder and active material used in composite lithium-ion batteries (LIB) has been conducted. Silicon is highly sought after material that can be used as an active material in a composite anode. Its high theoretical capacity can result in batteries that can store more energy than current LIBs, but high volume expansion of Si during charge/discharge cycles leads to rapid capacity fade and poor cyclic life. Understanding the stress that is generated in the binder and the active material due to the volume expansion has not been fully understood. In this study …

Multiframe Coded Computation For Distributed Uplink Channel Decoding, Brinell F. Monteiro

Theses

The latest 5G technology in wireless communication has led to an increasing demand for higher data rates and low latencies. The overall latency of the system in a cloud radio access network is greatly affected by the decoding latency in the uplink channel. Various proposed solutions suggest using network function virtualization (NFV). NFV is the process of decoupling the network functions from hardware appliances. This provides the exibility to implement distributed computing and network coding to effectively reduce the decoding latency and improve the reliability of the system. To ensure the system is cost effective, commercial off the shelf (COTS) …

Vergence Eye Movement Parameters For Pre/Post-Obvat And Sham Therapy On Binocularly Normal Controls, Joel V. Rajah

Theses

Vergence is the disjunctive movement of the eyes to maintain single binocular vision. Vergence eye movements are necessary to maintain the object of interest on the fovea of each eye as an individual looks from one object to another. Recent studies show that office based vergence/accommodative therapy (OBVAT) is an effective treatment for the binocular dysfunction known as convergence insufficiency. This study was performed to investigate the changes in oculomotor parameters parameter data for pre- and post-therapy subjects who are binocularly normal controls. A haploscope was used to collect eye movement data pre- and post-therapy. The analysis of the eye …

The Use Of Electrical Resistance Tomography To Determine The Minimum Agitation Speed For Solids Suspension In Stirred Tank Reactors, Baran Teoman

Theses

Njs, the minimum agitation speed needed to just suspend all the solid particles in a solid-liquid mixture stirred in an agitated vessel, is a critical parameter to properly operate industrial tanks in a large number of industrial operations. As a result, a significant literature on Njs is available. The oldest and the most common method to measure Njs experimentally is that of Zwietering’s (Chem. Eng. Sci., 1958, 8, 244-253), where Njs can be visually obtained by determining when the solids stay at the bottom of the tank for no more than 1-2 seconds before being swept away. Although this has …

Blind Source Separation Using Dictionary Learning Over Time-Varying Channels, Anushreya Ghosh

Theses

Distributed sensors observe radio frequency (RF) sources over flat-fading channels. The activity pattern is sparse and intermittent in the sense that while the number of latent sources may be larger than the number of sensors, only a few of them may be active at any particular time instant. It is further assumed that the source activity is modeled by a Hidden Markov Model. In previous work, the Blind Source Separation (BSS) problem solved for stationary channels using Dictionary Learning (DL). This thesis studies the effect of time-varying channels on the performance of DL algorithms. The performance metric is the probability …

An Electrical Matlab Model Of Plasma Electrolytic Oxidation, Huize Xue

Theses

Plasma Electrolytic Oxidation (PEO), a part of Plasma electrolytic Deposition (PED), has been developing for surface modification of metallic materials in the past 20 years. During PEO process, sample always connect with anode of DC power source, under high temperature, accelerating process of oxidation reaction to from an average and dense oxidation film. A general passage, Plasma electrolysis for surface engineering, written by A.L. Yerokhin, X. Nie gives us a trend of what happened during PEO process but did not determine specific material and value. Linxin Zhu’s Development of PEO invent a new boiling system and investigated relationship between surface …

Glass Transition Temperature Of Particles For Drug Delivery, Yiqing Yang

Theses

Drug delivery plays an important role in targeted therapies and nanoparticles which can be used as drug carriers and it’s a frequently researched topic. Poly(lactic-co-glycolic acid) (PLGA), a highly biocompatible polymer, has been used as a drug delivery vehicle in many studies. One of the challenges facing drug delivery particles is the problem of burst release which is when a large amount of the drug is suddenly released from the particle once it is placed in the body. This is generally undesirable as usually a slow and controlled release is preferred. The glass transition temperature has an effect on drug …

Tomato Puree Convective Heat Transfer Simulation Using Boussinesq Approximation, Matteo Fabbri

Theses

With the advance of new technologies, the food industries are requiring systems that allow to produce the desired products with faster rates at cheaper costs. In this case, the study was initiated with the purpose to better understand what happens inside a package containing tomato puree when this is heated above 343 K in a tunnel pasteurizer. If the fluid must reach the thermal and microbiological condition of “pasteurization”, the system must guarantee that the temperature (around 343° Kelvin) is kept for a certain time allowing to pasteurize even the cooler package’s fluid-particle. The faster the system can heat the …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• IT Internship -- Southeast Bulloch Middle School

Effect Of Specimen Thicknesses On Water Absorption And Flexural Strength Of Cfrp Laminates Subjected To Water Or Alkaline Solution Immersion, Xue Zhang, Yanlei Wang, Baolin Wan, Gaochuang Cai, Yuan Qu

Civil and Environmental Engineering Faculty Research and Publications

In this paper, an experimental research was undertaken to investigate the effect of specimen thicknesses on water absorptions and flexural strengths of wet lay-up CFRP laminates subjected to distilled water or alkaline solution immersion up to 180 days. Test results showed that the water uptake and flexural strength retention of CFRP laminates were significantly affected by the adopted specimen thickness. For the same aging time, the water uptake of CFRP laminates decreased in the early stage of immersion and increased in the later stage of immersion with the increase of specimen thickness. Meanwhile, the flexural strength retention generally increased as …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• 9 Electrical & Computer Engineering students presented 34 research topics (posters) at IEEE's SoutheastCon.
• Georgia Southern was also represented by three robotic hardware competition teams.

Monitoring Of Cure State Through The Use Of Microwaves, David Judd, Frank Gramling, Reza Zoughi, Mohammad Tayeb Ahmad Ghasr

Electrical and Computer Engineering Faculty Research & Creative Works

A method of manufacturing a tire is provided that includes curing the tire (10) in a curing press (12) and applying microwave energy at a given frequency band into the tire. The interaction between the microwave energy and the tire is monitored to obtain a complex reflection coefficient. A root-mean-squared error is calculated using the measured complex reflection coefficient and a reference reflection coefficient. The reference reflection coefficient is from a fully cured tire made from the same material as the tire. Continuous monitoring of the interaction takes place to obtain the complex reflection coefficient along …

Confucian Robot Ethics, Qin Zhu, Tom Williams, Ruchen Wen

Computer Ethics - Philosophical Enquiry (CEPE) Proceedings

In the literature of artificial moral agents (AMAs), most work is influenced by either deontological or utilitarian frameworks. It has also been widely acknowledged that these Western “rule-based” ethical theories have encountered both philosophical and computing challenges. To tackle these challenges, this paper explores a non-Western, role-based, Confucian approach to robot ethics. In this paper, we start by providing a short introduction to some theoretical fundamentals of Confucian ethics. Then, we discuss some very preliminary ideas for constructing a Confucian approach to robot ethics. Lastly, we briefly share a couple of empirical studies our research group has recently conducted that …

Responding To Some Challenges Posed By The Re-Identification Of Anonymized Personal Data, Herman T. Tavani, Frances S. Grodzinsky

Computer Ethics - Philosophical Enquiry (CEPE) Proceedings

In this paper, we examine a cluster of ethical controversies generated by the re-identification of anonymized personal data in the context of big data analytics, with particular attention to the implications for personal privacy. Our paper is organized into two main parts. Part One examines some ethical problems involving re-identification of personally identifiable information (PII) in large data sets. Part Two begins with a brief description of Moor and Weckert’s Dynamic Ethics (DE) and Nissenbaum’s Contextual Integrity (CI) Frameworks. We then investigate whether these frameworks, used together, can provide us with a more robust scheme for analyzing privacy concerns that …

Difference Between Algorithmic Processing And The Process Of Lifeworld (Lebenswelt), Domenico Schneider

Computer Ethics - Philosophical Enquiry (CEPE) Proceedings

The following article compares the temporality of the life-world with the digital processing. The temporality of the life-world is determined to be stretched and spontaneous. The temporality of the digital is given by discrete step-by-step points of time. Most ethical issues can be traced back to a mismatch of these two ways of processing. This creates a foundation for the ethics of the digital processing. Methodologically, phenomenological considerations are merged with media-philosophical considerations in the article.

A Ulysses Pact With Artificial Systems. How To Deliberately Change The Objective Spirit With Cultured Ai, Bruno Gransche

Computer Ethics - Philosophical Enquiry (CEPE) Proceedings

The article introduces a concept of cultured technology, i.e. intelligent systems capable of interacting with humans and showing (or simulating) manners, of following customs and of socio-sensitive considerations. Such technologies might, when deployed on a large scale, influence and change the realm of human customs, traditions, standards of acceptable behavior, etc. This realm is known as the "objective spirit" (Hegel), which usually is thought of as being historically changing but not subject to deliberate human design. The article investigates the question of whether the purposeful design of interactive technologies (as cultured technologies) could enable us to shape modes of …

A Metacognitive Approach To Trust And A Case Study: Artificial Agency, Ioan Muntean

Computer Ethics - Philosophical Enquiry (CEPE) Proceedings

Trust is defined as a belief of a human H (`the trustor') about the ability of an agent A (the `trustee') to perform future action(s). We adopt here dispositionalism and internalism about trust: H trusts A iff A has some internal dispositions as competences. The dispositional competences of A are high-level metacognitive requirements, in the line of a naturalized virtue epistemology. (Sosa, Carter) We advance a Bayesian model of two (i) confidence in the decision and (ii) model uncertainty. To trust A, H demands A to be self-assertive about confidence and able to self-correct its own models. In the Bayesian …

Modeling The Economic Machine Using Bayesian Inference And Statistical Networks, And Optimal Portfolio Construction Using Operations Research, Richard Yang

ENGS 88 Honors Thesis (AB Students)

In this paper, we propose a network-based model to attempt to connect modern macroeconomic theory with real world economic observations and trends. We find that by extending macroeconomic theory with credit leveraging/deleveraging thresholds, we are able to explain economic cycles in addition to long-term growth. Furthermore, we specifically explore the growth-inflation view of the macro economy as a basis for optimal portfolio construction and efficient asset trading. Connecting our network-based macroeconomic model and our optimal portfolio construction algorithm, we create a novel macroeconomic asset-trading framework.

Mascoma River Greenway Extension, Isalys Quiñones

ENGS 86 Independent Projects (AB Students)

In July of 2018, the Mascoma River Greenway (MRG), a 2.2-mile rail trail extending from Downtown Lebanon, NH to Glen Road in West Lebanon, NH, was completed with the help of the MRG Coalition, the Friends of the Northern Rail Trail, Lebanon Recreation and Parks, and members of the City of Lebanon. Initially, this trail was proposed to extend from Downtown Lebanon to Downtown West Lebanon and White River Junction (WRJ). With pushback from the State of New Hampshire to lease the City of Lebanon recreational usage to the New Hampshire State Department of Transportation (NHDOT) owned rail corridor, the …

Highly Effective Geni Alloy Contact Diffusion Barrier For Bisbte Long-Term Thermal Exposure, Erdong Song, Brian S. Swartzentruber, Chowdary R. Koripella, Julio A. Martinez

Publications and Research

A GeNi alloy diffusion barrier for contacts on bismuth antimony telluride is proposed. Multiple gold contact diffusion barriers were tested at different thermal aging conditions in air and reducing atmospheres. Among all diffusion barriers, the GeNi alloy barrier shows the best performance for bulk samples with no substantial degradation of the contact resistance, no contact color change, and no change of thermoelectric properties. We observed DAu−GeNi = (9.8 ± 2.7) × 10−20 m2/s within the GeNi alloy barrier, which is 4 times smaller than DAu−BiSbTe. The presence of the initial Ge layer also proves to be effective in reducing nickel …

Challenges For Natural Hydrogels In Tissue Engineering, Esmaiel Jabbari

Faculty Publications

Protein-based biopolymers derived from natural tissues possess a hierarchical structure in their native state. Strongly solvating, reducing and stabilizing agents, as well as heat, pressure, and enzymes are used to isolate protein-based biopolymers from their natural tissue, solubilize them in aqueous solution and convert them into injectable or preformed hydrogels for applications in tissue engineering and regenerative medicine. This review aims to highlight the need to investigate the nano-/micro-structure of hydrogels derived from the extracellular matrix proteins of natural tissues. Future work should focus on identifying the nature of secondary, tertiary, and higher order structure formation in protein-based hydrogels derived …

Challenges For Natural Hydrogels In Tissue Engineering, Esmaiel Jabbari

Faculty Publications

Protein-based biopolymers derived from natural tissues possess a hierarchical structure in their native state. Strongly solvating, reducing and stabilizing agents, as well as heat, pressure, and enzymes are used to isolate protein-based biopolymers from their natural tissue, solubilize them in aqueous solution and convert them into injectable or preformed hydrogels for applications in tissue engineering and regenerative medicine. This review aims to highlight the need to investigate the nano-/micro-structure of hydrogels derived from the extracellular matrix proteins of natural tissues. Future work should focus on identifying the nature of secondary, tertiary, and higher order structure formation in protein-based hydrogels derived …

Neutronic And Cfd-Thermal Hydraulic Analyses Of Very-Small, Long-Life, Modular (Vsllim) Reactor, Luis M. Palomino

Nuclear Engineering ETDs

Neutronic and CFD-thermal hydraulic analyses are performed of the Very-Small, Long-LIfe, and Modular (VSLLIM) nuclear reactor. This reactor was developed at the University of New Mexico’s Institute for Space and Nuclear Power Studies (UNM-ISNPS) to generate 1.0 – 10 MW_th for extended periods without refueling. It offers passive operation and safety features and redundant control and would be fabricated, assembled and sealed in the factory. During nominal operation and after shutdown, the VSLLIM is cooled by natural circulation of in-vessel liquid sodium, with the aid of an in-vessel chimney and annular helically-coiled …

Meeting 2030 Primary Energy And Economic Growth Goals: Mission Impossible?, Matthew Kuperus Heun, Paul E. Brockway

University Faculty Publications and Creative Works

To meet climate change mitigation objectives, international institutions have adopted targets aimed at reducing or ending growth of primary energy consumption. Simultaneously, continued economic growth is forecasted to meet human development goals. Together, declining energy consumption and rising gross domestic product (GDP) is called “absolute decoupling.” However, absolute decoupling is unprecedented for the world economy as a whole (since at least 1971). Is absolute decoupling “Mission impossible?” Given the high stakes, we need a clearer understanding of the extent of future energy–GDP decoupling. To gain that understanding, we perform societal exergy analyses using a novel Physical Supply Use Table framework …