Engineering Commons^™

Engineering Technology Graduates: A Survey Of Demographics And Mentoring, Anne M. Lucietto, Elizabeth Dell, Elaine M. Cooney, Lisa Ann Russel, Emily Schott

School of Engineering Technology Faculty Publications

Early in 2017, a team of engineering technology practitioners along with others interested in the state of engineering technology published a report entitled “Engineering Technology Education in the United States.” This report garnered a list of recommendations and things that needed to be investigated to further our understanding of this student population; specifically focusing on the students and how they relate to other students studying both similar and different material. A team of like-minded engineering technology education researchers have been working together to ascertain the answers to the findings. They prepared two surveys, obtained institutional approval, and distributed it throughout …

Me-Em Enewsbrief, June 2019, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Determination Of Cleaning Frequency And Power Enhancement Of Photovoltaic Panels Using Novel Cleaning Approach, Ali Hasan Shah

Electrical Engineering Theses

Dust accumulation on the photovoltaic (PV) surface decreases the solar radiation penetration to the PV cells and eventually the power production from the PV system. In order to prevent the dust-based power losses, the PV systems are required to be cleaned frequently depending upon different geographical locations, PV integration schemes, and the scale of the PV power plant. In large-scale power plants, the PVs are periodically cleaned traditionally by water sprinkling that requires sophisticated equipment mobile equipment that at the best involves robotics and hence calls for substantial capital investment as well as water consumption. Since most of the largescale …

Functionalization Of 2d-Zno For Selective Gas Sensing: First-Principles Analysis, Alaa F. M. Shaheen

Mechanical Engineering Theses

The scope of this MSc thesis is to theoretically search for suitable materials and relevant factors (e.g., dopants and catalysts) to induce gas sensing (GS) selectivity towards harmful gases such as H₂, H₂S, and CO₂, under ambient conditions. We chose as material 2D-ZnO Honeycomb in the form of nanoribbon (ZnO-NR), which is very promising in the gas sensing applications. We employed a state-of-the-art computational method, based on a combination of the density-functional theory (DFT) and the Non-Equilibrium Green’s Functions (NEGF) formalism, which both are incorporated in Atomistic Toolkit (ATK) package. This package is famous …

Electromagnetic Analysis Of A Wind Turbine Magnetic Gearbox, Kang Li, Sina Modaresahmadi, Wesley B. Williams, Jonathan Bird

Electrical and Computer Engineering Faculty Publications and Presentations

The design of the second stage of a 59:1 multi-stage magnetic gearbox for a wind turbine demonstrator is presented. The multi-stage series-connected magnetic gearbox is composed of a 6.45 first stage and 9.14 second stage. A flux-focusing spoke-type rotor typology is used with a unique segmented fully laminated design. The impact of structural design changes is considered with respect to torque density. A new rotor typology is presented that enables the magnetic gearbox to be mechanically assembled first without magnets.

Evaluation Of Bus-Bicycle And Bus/Right-Turn Traffic Delays And Conflicts, Katherine L. Keeling, Travis B. Glick, Miles Crumley, Miguel A. Figliozzi

Electrical and Computer Engineering Faculty Publications and Presentations

This research evaluates conflicts and delays caused by interactions among buses, bicycles, and right-turning vehicles at a mixed traffic corridor in Portland, OR. The study site has a near-side bus stop and a right curbside lane designated for buses and right-turning vehicles. Next to the bus/right-turn lane is a bicycle lane with a bicycle box ahead of the bus stop (i.e., between the intersection and the bus stop). This research examines two concerns caused by these overlapping bus, bicycle, and automobile facilities; the first is the number of bus-bicycle conflicts (as a proxy for safety) and the second is bus …

Further Investigation Of Energy And Performance Impacts Of Whole-House Dehumidifier Duct Configurations, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

This research project evaluated the energy impacts and dehumidification performance related to how ducted dehumidifiers (DHU) ducts were configured. Lab controlled testing over a variety of weather and latent loads evaluated five-different ducted DHU configurations as follows: Test 1 DHU air ducted from/to the central main body of building. Test 2 DHU air ducted from/to return side of central air conditioner (AC). Test 3 DHU air ducted from/to supply side of AC. Test 4 DHU air ducted from central main body and ducted to supply side of AC. Test 5 DHU air ducted from outdoors and indoors mixed before DHU …

Employing Biomimicry In Urban Metamorphosis Seeking For Sustainability: Case Studies, M. Salim Ferwati, Maryam Alsuwaidi, Arezou Shafaghat, Ali Keyvanfar

Faculty Articles

Objective: The current study has aimed to develop the framework of biomimicry involvement in urban metamorphosis for sustainability. This research has engaged four objectives to achieve the aim. Objective one is to explore the rudiment interaction between human and nature through interrogating history, nature’s design. Objective two is to excavate the biomimicry in emulating nature’s genius. Objective three is to investigate the association between biomimicry and sustainable development, focusing on architectural features. Objective four is to develop the framework based on the biomimicry rules for human evolution and survival in the natural environment. Methodology: To achieve objective one, the grounded …

A Framework For Bim Model-Based Construction Cost Estimation, Michael Clark

Master's Theses

This thesis presents a framework to conduct a quantity take-off (QTO) and cost estimate within the Building Information Modeling (BIM) Environment. The product of this framework is a model-based cost estimating tool. The framework addresses the cost uncertainty associated with the detailed information defining BIM model element properties. This cost uncertainty is due to the lack of available tools that address detailed QTO and cost estimation using solely a BIM platform. In addition, cost estimators have little experience in leveraging and managing information within semantic-rich BIM models. Unmanaged BIM element parameters are considered a source of uncertainty in a model-based …

The Performance Cost Of Security, Lucy R. Bowen

Master's Theses

Historically, performance has been the most important feature when optimizing computer hardware. Modern processors are so highly optimized that every cycle of computation time matters. However, this practice of optimizing for performance at all costs has been called into question by new microarchitectural attacks, e.g. Meltdown and Spectre. Microarchitectural attacks exploit the effects of microarchitectural components or optimizations in order to leak data to an attacker. These attacks have caused processor manufacturers to introduce performance impacting mitigations in both software and silicon.

To investigate the performance impact of the various mitigations, a test suite of forty-seven different tests was created. …

Robot Navigation In Cluttered Environments With Deep Reinforcement Learning, Ryan Weideman

Master's Theses

The application of robotics in cluttered and dynamic environments provides a wealth of challenges. This thesis proposes a deep reinforcement learning based system that determines collision free navigation robot velocities directly from a sequence of depth images and a desired direction of travel. The system is designed such that a real robot could be placed in an unmapped, cluttered environment and be able to navigate in a desired direction with no prior knowledge. Deep Q-learning, coupled with the innovations of double Q-learning and dueling Q-networks, is applied. Two modifications of this architecture are presented to incorporate direction heading information that …

Viewpoint Optimization For Autonomous Strawberry Harvesting With Deep Reinforcement Learning, Jonathon J. Sather

Master's Theses

Autonomous harvesting may provide a viable solution to mounting labor pressures in the United States' strawberry industry. However, due to bottlenecks in machine perception and economic viability, a profitable and commercially adopted strawberry harvesting system remains elusive. In this research, we explore the feasibility of using deep reinforcement learning to overcome these bottlenecks and develop a practical algorithm to address the sub-objective of viewpoint optimization, or the development of a control policy to direct a camera to favorable vantage points for autonomous harvesting. We evaluate the algorithm's performance in a custom, open-source simulated environment and observe affirmative results. Our trained …

Field Emissions Of Methane And Nitrous Oxide From California Landfills, Alexandra D. Limpert

Master's Theses

Comprehensive and systematic aerial and field investigations were conducted at representative California landfills to quantify emissions of methane and nitrous oxide. Landfills are highly engineered; however, they are one of the largest anthropogenic sources of greenhouse gases, causing human health and safety concerns. Methane (CH₄) and nitrous oxide (N₂O) are significant greenhouse gases with high global warming potentials that are generated in a landfill environment.

For site selection, sites were evaluated based on waste in place, climate zone, faults and oil and gas operations, population density, cover conditions and percentage of cover types, age of waste, …

Fifth Aeon – A.I Competition And Balancer, William M. Ritson

Master's Theses

Collectible Card Games (CCG) are one of the most popular types of games in both digital and physical space. Despite their popularity, there is a great deal of room for exploration into the application of artificial intelligence in order to enhance CCG gameplay and development. This paper presents Fifth Aeon a novel and open source CCG built to run in browsers and two A.I applications built upon Fifth Aeon. The first application is an artificial intelligence competition run on the Fifth Aeon game. The second is an automatic balancing system capable of helping a designer create new cards that do …

Study Of Paper Microbial Fuel Cells For Use In On-Site Wastewater Testing, William A. Tolmasoff

Master's Theses

This study demonstrated a technique for fabricating simple, low-cost Paper Microbial fuel cells (PMFC’s) in the model of a previous study to, for the first time, produce voltage from wastewater effluent. The PMFC’s were created by stacking and gluing the main components of an MFC together: reservoir layer; anode; cation exchange membrane (CEM); air cathode. A wax printer was used to create the hydrophobic borders of the PMFC’s on filter paper, and graphite paint was applied to the paper to create the anode. The CEM’s considered were filter paper, wax, and Nafion, with Nafion being the most efficient. Finally, the …

Analysis Of The Effects Of Adaptive Ramp Metering On Measures Of Efficiency With A Proposed Framework For Safety Evaluation, Jacky Loh

Master's Theses

Adaptive ramp metering (ARM) is a widely popular intelligent transportation system (ITS) tool that boasts the ability to reduce congestion and streamline traffic flow during peak hour periods while maintaining a lower implementation cost than traditional methods such as freeway widening. This thesis explores the effectiveness of ARM implementation on an 18 mile segment of the Interstate 80 (I-80) corridor in the Bay Area residing in northern California. Smaller segments of this particular segment were analyzed to determine the effective length of ARM on efficiency at various lengths originating from a known bottleneck location. Efficiency values were also compared against …

Effects Of Corrugations On Stiffness Properties Of Composite Beams For Structural Applications, Jane Xiao

Master's Theses

Composites have high strength-to-weight ratios, which is particularly desired for applications with weight restrictions. Common composite materials such as carbon fiber reinforced plastic (CF) and fiber glass reinforced plastic (FG) were used in this research. While composite materials possess high stiffness and strength properties, the stiffness of composite laminates may be maximized by changing the geometry. By adding corrugations, the flexural stiffness is increased in one direction compared to the stiffness of a flat part with the same amount of material. Thus, stiffness increases without a change in weight. The primary goal of this research was to investigate the stiffness …

Atomic Oxygen Effects On Particulate Contamination And Short Beam Strength Of Carbon Composites, Marlee K. Litzinger

Master's Theses

In order to design a successful space system, the unique challenges of the space environment it will operate in must be considered during the design process. Atomic oxygen (AO) is a detrimental environmental effect found in Low Earth Orbit (LEO) that affects spacecraft surfaces by oxidizing and eroding material over time, particularly polymers. Carbon fiber/epoxy composites are a commonly used spacecraft material affected by AO exposure. Carbon composites are used as a structural material, such as on solar panels; their large surface area therefore is a potential contamination source to sensitive components. The Space Environments and Testing Lab at California …

Carbonate Chemistry Characterization In A Low-Inflow Estuary With Recent Seagrass Loss, Jolie Higgins

Master's Theses

Estuaries are dynamic environments that are strongly affected by natural variability, as well as direct and indirect anthropogenic impacts. A better understanding of the drivers of carbon fluxes and biogeochemical variability in estuarine systems is needed, particularly with the increasing threat of ocean acidification. Morro Bay in Central California is a small nationally protected estuary, with seasonally low freshwater inputs. Since 2007, the bay has experienced a significant loss of native seagrass, Zostera marina, which is an important component of the marine ecosystem. Because seagrass photosynthesis decreases carbon dioxide and increases oxygen in the water column, the loss of seagrass …

A Predictive Modeling Approach For Assessing Seismic Soil Liquefaction Potential Using Cpt Data, Jonathan Paul Schmidt

Master's Theses

Soil liquefaction, or loss of strength due to excess pore water pressures generated during dynamic loading, is a main cause of damage during earthquakes. When a soil liquefies (referred to as triggering), it may lose its ability to support overlying structures, deform vertically or laterally, or cause buoyant uplift of buried utilities. Empirical liquefaction models, used to predict liquefaction potential based upon in-situ soil index property measurements and anticipated level of seismic loading, are the standard of practice for assessing liquefaction triggering. However, many current models do not incorporate predictor variable uncertainty or do so in a limited fashion. Additionally, …

Designing A Simulator For An Electrically-Pumped Organic Laser Diode, Robert Hulbert

Master's Theses

Organic semiconductors provide an alternative set of basis materials to fabricate electronic devices like PN Junctions, LEDs, and FETs. These materials have several benefits over traditional inorganic semiconductors including their mechanical flexibility, reliance on renewable resources, and inexpensive large-scale manufacturability. Despite the contemporary device implementations with organic semiconductors, a solid-state electrically-pumped organic laser diode does not exist. However, organically-based lasers do exist by utilizing the organic material strictly for optical gain. The challenge occurs when charge carriers appear in the organic material. The charge carriers must reach a concentration such that population inversion occurs producing optical gain. However, between the …

A Homegrown Dsmc-Pic Model For Electric Propulsion, Dominic Charles Lunde

Master's Theses

Powering spacecraft with electric propulsion is becoming more common, especially in CubeSat-class satellites. On account of the risk of spacecraft interactions, it is important to have robust analysis and modeling tools of electric propulsion engines, particularly of the plasma plume. The Navier-Stokes equations used in classic continuum computational fluid dynamics do not apply to the rarefied plasma, and therefore another method must be used to model the flow. A good solution is to use the DSMC method, which uses a combination of particle modeling and statistical methods for modeling the simulated molecules. A DSMC simulation known as SINATRA has been …

A 3-Dimensional In Silico Test Bed For Radiofrequency Ablation Catheter Design Evaluation And Optimization, Carolyn Teng

Master's Theses

Atrial fibrillation (AF) is the disordered activation of the atrial myocardium, which is a major cause of stroke. Currently, the most effective, minimally traumatic treatment for AF is percutaneous catheter ablation to isolate arrhythmogenic areas from the rest of the atrium. The standard in vitro evaluation of ablation catheters through lesion studies is a resource intensive effort due to tissue variability and visual measurement methods, necessitating large sample sizes and multiple prototype builds. A computational test bed for ablation catheter evaluation was built in SolidWorks® using the morphology and dimensions of the left atrium adjacent structures. From this geometry, the …

Evaluation Of Human Umbilical Vein Endothelial Cells In Blood Vessel Mimics Through Changes In Gene Expression And Caspase Activity, Conor Charles Hedigan

Master's Theses

Blood vessel mimics (BVMs) are simple tissue engineered blood vessel constructs intended for preclinical testing of vascular devices. This thesis developed and implemented methods to characterize two of these components. The first aim of this thesis investigated the effect of cell culture duration and flow conditions on endothelial cell gene expression, especially regarding endothelial-to-mesenchymal transition (EndMT). A trend of decreased endothelial marker gene expression and increased mesenchymal marker gene expression would indicate EndMT. qPCR analysis revealed that increased cell culture duration did not result in EndMT, and in fact increased endothelial marker expression as cell culture duration increased. Disturbed flow …

Fracture Control Modeling With The Finite Element Method, Jorge A. Pluma Reyes

Master's Theses

This thesis investigates the feasibility and usability of the finite element method approach in the design of crack arresting devices. Current design and manufacturing practices are improving structures' susceptibility to fracture, in particular brittle fracture; however, cracks in structures are still observed within their lifespans due to severe unexpected service conditions, poor designs, or faulty manufacturing. Crack arrester systems can be added during service to prolong the longevity of structures with sub-critical or critical flaws. Fracture properties of different specific structures under specific services can be obtained experimentally, however, experiments are expensive and of high complexity. Alternatively, the finite element …

Development Of A Model And Imbalance Detection System For The Cal Poly Wind Turbine, Ryan Miki Takatsuka

Master's Theses

This thesis develops a model of the Cal Poly Wind Turbine that is used to determine if there is an imbalance in the turbine rotor. A theoretical model is derived to estimate the expected vibrations when there is an imbalance in the rotor. Vibration and acceleration data are collected from the turbine tower during operation to confirm the model is useful and accurate for determining imbalances in the turbine.

Digital signal processing techniques for analyzing the vibration data are explored and tested with simulation data. This includes frequency shifts, lock-in amplifiers, phase-locked loops, discrete Fourier transforms, and decimation filters. The …

Transmission Probability Of Embolic Debris Through The Aortic Arch And Daughter Vessels During A Transcatheter Aortic Valve Replacement Procedure, Jessica Lena Wirth

Master's Theses

Cerebral ischemia leading to an ischemic stroke is a possible complication of a transcatheter aortic valve replacement (TAVR) procedure. This is because embolic debris can become dislodged and travel through the aortic arch, where they either continue to the descending aorta and join the systemic circulation or travel into the cerebral vasculature through the three daughter vessels that branch off the top of the aortic arch. These three vessels are the brachiocephalic artery, the left subclavian artery, and the left common carotid artery. These three vessels lead either directly or indirectly to the cerebral vasculature, where the diameter of vessels …

Sidewalks To Nowhere: A Tool To Prioritize Pedestrian Improvements, Ho Yan Lai

Master's Theses

Walkability as a concept that captures the ability to walk from one place to another has multiple dimensions. Between traversability to being a proxy for better urban places, there are also numerous measurements of walkability that attempts to quantify certain or all aspects of walkability. It is, however, unclear, through a review of available literature, how these measurements of walkability relate to each other statistically. This methodology focuses on generating a framework for analysts to evaluate and prioritize pedestrian infrastructure. WalkScore™ (WS), HCM Pedestrian Level of Service (PLOS), Average Nodal Degree (AND), and Intersection Density are the four metrics selected …

In-Plane Cyclic Behavior Of A Steel Mesh Reinforced Cob Wall, Julia Fremuth Sargent

Master's Theses

This thesis presents the results from in-plane cyclic testing of a reinforced cob wall. Cob is an earthen building material composed of sand, clay, straw and water. Cob is typically constructed with no steel reinforcement; however, the California Building Code requires reinforcement in all buildings for resisting seismic forces. The purpose of this thesis is to provide additional technical data to integrate cob into the building code.

Test results are reported for a 7’ x 8’ x 14” wall with two layers of welded wire steel reinforcement constructed on a reinforced concrete foundation. In-plane cyclic loading was performed on the …

Compact Rake Boundary Layer Data System Module, Nathan Jeffry Hoyt

Master's Theses

This Thesis describes the design, assembly, programming, and evaluation of the BLDS-M-RAKE, the newest addition to the family of devices called the Boundary Layer Data System (BLDS). The BLDS-M-RAKE is a continuation of the BLDS-M series of devices, a modular approach with updated electronics for boundary layer measurements. The BLDS-M-RAKE records data from a number of sensors, intended to be routed to an array of probes, or rake. Through preliminary testing, a new flexible manifold design from molded silicone and the hardware used on the RFduino development boards from the BLDS-M proof-of-concept modules were validated for use in the final …