Engineering Commons^™

Car Hacking: Accessing And Exploiting The Can Bus Protocol, Bryson R. Payne

Journal of Cybersecurity Education, Research and Practice

With the rapid adoption of internet-connected and driver-assist technologies, and the spread of semi-autonomous to self-driving cars on roads worldwide, cybersecurity for smart cars is a timely concern and one worth exploring both in the classroom and in the real world. Highly publicized hacks against production cars, and a relatively small number of crashes involving autonomous vehicles, have brought the issue of securing smart cars to the forefront as a matter of public and individual safety, and the cybersecurity of these “data centers on wheels” is of greater concern than ever.

However, up to this point there has been a …

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Training Curricula For The Kentucky Transportation Cabinet Department Of Highways, Nancy Albright, Bryan Gibson, Chris Van Dyke, Jeff Jasper, Doug Kreis

Kentucky Transportation Center Research Report

Most state departments of transportation (DOTs) offer their employees professional development opportunities (e.g., training courses) so they can build their expertise and in doing so facilitate agency efforts to fulfill their business mandates. The Kentucky Transportation Cabinet (KYTC) is no different in this regard. While professional development opportunities are invaluable, and while the Cabinet offers a number of trainings to its staff, currently there exists no comprehensive training curricula to help professionals and paraprofessionals systematically grow their knowledge and skills and ensure KYTC maintains a robust portfolio of technical competencies across the organization. The inconsistent and ad hoc manner in …

E-Tickets And Advanced Technologies For Efficient Construction Inspections, Roy E. Sturgill, Gabriel B. Dadi, Christopher Van Dyke, Dhaviat Patel, Joshua Withrow, Clyde Wesley Newcomer Iv

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC), like many state transportation agencies, has seen demand for high-quality infrastructure skyrocket even as it endures reductions in staff numbers. To mitigate the effects of declining staff and bolster construction efficiency, the Cabinet has experimented with a variety of e-construction technologies, the goal of which are to abolish paper-based workflows and improve project-site monitoring activities. This research investigated the performance of three e-construction technologies on KYTC pilot projects — e-ticketing, paver mounted thermal profilers, and intelligent compaction. E-ticketing reduced the amount of time needed to retrieve material tickets and facilitated comparisons of theoretical tonnages to …

Redefining Construction As-Built Plans To Meet Current Kentucky Transportation Cabinet Needs, Victoria Lynn Lasley, Steven Waddle, Tim Taylor, Roy E. Sturgill Jr.

Kentucky Transportation Center Research Report

As-built plans have traditionally been used by construction industry practitioners to record changes made during construction. As-builts provide valuable information for new design projects as well as rehabilitation and remediation projects. The completeness and accuracy of these plans are essential for transportation industries and their success. While the importance of as-builts is widely recognized, preparing them can be difficult and time-consuming; many entities — especially public agencies — lack the resources necessary to produce accurate and detailed as-builts. After investigating the current as-built operations of state transportation agencies, Kentucky Transportation Center (KTC) researchers devised recommendations to improve the Kentucky Transportation …

Review Of Non-Standard Warm Mix Asphalt Projects, Tim C. Scully Jr.

Kentucky Transportation Center Research Report

Periodically, when the Kentucky Transportation Cabinet’s (KYTC) the Division of Construction receives requests to use non-standard warm mix asphalt technologies, it may be asked to waive the temperature specification or other product specifications/processes. The short-term and long-term impacts of this waiver are not completely understood. The Division of Construction approves these requests and notes their use, however, no follow-up studies have been done to evaluate the performance of non-standard warm mix asphalt. Similarly, no previous studies have compared data on quality assurance/quality control (QA/QC) and performance for these mixtures with those of standard warm mix asphalt mixtures. Thus, the performance …

Statistical Optimization Of Stress Level In Mg-Li-Al Alloys Upon Hot Compression Testing, Rezawana Islam, Meysem Haghshenas

Mechanical Engineering Faculty Publications

In the present study, a response optimization method using Extreme Vertices Mixer Design (EVMD) approach is proposed for stress optimization in a thermomechanically processed Mg-Li-Al alloy. Experimentation was planned as per mixed design proportions of Mg, Li and Al and process variables (i.e. temperature and strain rate). Each experiment has been performed under different conditions of factors proportions and process variables. The response, particularly stress has been considered for each experiment. The response is optimized to find an optimum condition when the contributing factors influence material characteristics in such a way, to achieve better strength, ductility and corrosion resistance. Estimated …

Learning In Informal Environments Through Engineering Activities Through The Partnership With The Girl Scouts, Vukica M. Jovanovic, Otilia Popescu, Carol Considine, Karina Arcaute, Krishnanand Kaipa, Stephanie G. Adams

Engineering Technology Faculty Publications

More affordable and portable robots have enabled easier access for outreach activities to happen in different environments. However, exposure to robotics often relies on seeing robots in action, such as industrial robotics and robots that are used for research purposes. Old Dominion University’s College of Engineering and Technology in Norfolk, Virginia recently signed a partnership agreement with the Girl Scouts of Colonial Coast as one of the focused outreach strategies that target the female population. Various events are held on campus in the Hampton Roads residential area located in the southeastern United States, which has a population of around 2 …

Teaching Introduction To Welding In Undergraduate And Graduate Engineering Technology Programs, Hamid Eisazadeh, Milan Rakita, Mona Torabizadeh, Vukica Jovanovic

Engineering Technology Faculty Publications

Recent trends in the industry have led to an increased need for engineers with welding training. Not many universities in the U.S.A. offer welding courses at undergraduate level. Engineers that do not receive education about this complex process, sometimes they make a very costly and dangerous mistake. More profound understanding of the welding process that expands beyond the basic comprehension of technology use is needed for the advanced manufacturing sector. Welding related courses, as it involves the complex interplay of the four states of matter (solid, liquid, gas and plasma) as governed by the laws of physics, need topics such …

Impact Of Http Cookie Violations In Web Archives, Sawood Alam, Michele C. Weigle, Michael L. Nelson

Computer Science Faculty Publications

Certain HTTP Cookies on certain sites can be a source of content bias in archival crawls. Accommodating Cookies at crawl time, but not utilizing them at replay time may cause cookie violations, resulting in defaced composite mementos that never existed on the live web. To address these issues, we propose that crawlers store Cookies with short expiration time and archival replay systems account for values in the Vary header along with URIs.

Iterative Learning Control Of Single Point Incremental Sheet Forming Process Using Digital Image Correlation, Joseph D. Fischer, Mitchell R. Woodside, Mercedes M. Gonzalez, Nathan A. Lutes, Douglas A. Bristow, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Single Point Incremental Sheet Forming (SPIF) is a versatile forming process that has gained significant traction over the past few decades. Its increased formability, quick part adaption, and reduced set-up costs make it an economical choice for small batch and rapid prototype forming applications when compared to traditional stamping processes. However, a common problem with the SPIF process is its tendency to produce high geometric error due to the lack of supporting dies and molds. While geometric error has been a primary focus of recent research, it is still significantly larger for SPIF than traditional forming processes. In this paper, …

Nanoparticle Injector For Photonic Manipulators Using Dielectrophoresis, Jaykob Maser, Joshua Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We describe the concept of a dielectrophoretic nanoparticle injector and its use in a plasmonic/photonic-based nanoparticle manipulation system. Particle motion is achieved by generating an electrostatic, non-uniform field between two tilted plates and applying the corresponding dielectrophoretic force to net-neutral nanoparticles. We investigate the dependence the dielectrophoretic force has on the plate angle of the charged plates as well as their separation distance, dielectric filler material, and exit interface membrane. Our results indicate an increasing average and maximum dielectrophoretic force attainable in the axial direction with corresponding decreasing plate angle and gap distance. The model also predicts larger field variation …

Forming Key Partnerships To Enhance Graduate Student Programming, Emily K. Hart, Alex Vincent Jannini, Alexander James Johnson, Katy Pieri

Librarian Publications

The graduate chapter of the American Society for Engineering Education (ASEE@SU) and the SU STEM Librarian formed a collaborative and mutually beneficial partnership with the goal of enhancing non-curricular educational opportunities for graduate students in the College of Engineering and Computer Science (ECS). By combining the expertise of both organizations, including strategies for event planning, marketing, and outreach, as well as data garnered through event feedback surveys, significant strides were made toward connecting with and better understanding the needs of the ECS graduate students. The goal of this study is to share lessons learned and recommendations for developing successful graduate …

Bulk-Explosion-Induced Metal Spattering During Laser Processing, Cang Zhao, Qilin Guo, Xuxiao Li, Niranjan Parab, Kamel Fezzaa, Wenda Tan, Lianyi Chen, Tao Sun

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Spattering has been a problem in metal processing involving high-power lasers, like laser welding, machining, and recently, additive manufacturing. Limited by the capabilities of in situ diagnostic techniques, typically imaging with visible light or laboratory x-ray sources, a comprehensive understanding of the laser-spattering phenomenon, particularly the extremely fast spatters, has not been achieved yet. Here, using MHz single-pulse synchrotron-x-ray imaging, we probe the spattering behavior of Ti-6Al-4V with micrometer spatial resolution and subnanosecond temporal resolution. Combining direct experimental observations, quantitative image analysis, as well as numerical simulations, our study unravels a novel mechanism of laser spattering: The bulk explosion of …

A Hybrid Process Integrating Reverse Engineering, Pre-Repair Processing, Additive Manufacturing, And Material Testing For Component Remanufacturing, Xinchang Zhang, Wenyuan Cui, Wei Li, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Metallic components can gain defects such as dents, cracks, wear, heat checks, deformation, etc., that need to be repaired before reinserting into service for extending the lifespan of these parts. In this study, a hybrid process was developed to integrate reverse engineering, pre-repair processing, additive manufacturing, and material testing for the purpose of part remanufacturing. Worn components with varied defects were scanned using a 3D scanner to recreate the three-dimensional models. Pre-repair processing methods which include pre-repair machining and heat-treatment were introduced. Strategies for pre-repair machining of defects including surface impact damage, surface superficial damage and cracking were presented. Pre-repair …

Generation Of Nondiffracting Vector Beams With Ring-Shaped Plasmonic Metasurfaces, Yuchao Zhang, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nondiffracting Bessel, Mathieu, and Weber vector beams are generated by using ring-shaped plasmonic geometric metasurfaces. The nondiffracting vector beam is produced by the superposition of two off-axis right-handed and left-handed circularly polarized nondiffracting scalar beams described by the Whittaker integral, which are simultaneously generated by a single metasurface with the ring-shaped phase profile. The polarization states of the generated nondiffracting vector beams are analyzed by the Stokes parameters and the orbital angular momentum states are measured by the beam interference. In addition, the selfhealing properties of nondiffracting vector beams are further demonstrated, showing that not only the beam profiles but …

Effect Of Slm Build Parameters On The Compressive Properties Of 304l Stainless Steel, Okanmisope Fashanu, Mario F. Buchely, Myranda Spratt, Joseph William Newkirk, K. Chandrashekhara, Heath Misak, Michael Walker

Materials Science and Engineering Faculty Research & Creative Works

Selective laser melting (SLM) is well suited for the efficient manufacturing of complex structures because of its manufacturing methodology. The optimized process parameters for each alloy has been a cause for debate in recent years. In this study, the hatch angle and build orientation were investigated. 304L stainless steel samples were manufactured using three hatch angles (0◦, 67◦, and 105◦) in three build orientations (x-, y-, and z-direction) and tested in compression. Analysis of variance and Tukey's test were used to evaluate the obtained results. Results showed that the measured compressive yield strength and plastic flow stress varied when the …

Novel And Efficient Parasitic Decoupling Network For Closely Coupled Antennas, Min Li, Lijun Jiang, Kwan Lawrence Yeung

Electrical and Computer Engineering Faculty Research & Creative Works

A novel and efficient parasitic decoupling network (PDN) is proposed for closely coupled antennas in this paper, which provides a new perspective and approach to design DNs based on the parasitic decoupling concept. The PDN is composed of sections of transmission lines (TLs) and reactive components, allowing additional power-traveling paths. With the TL lengths and reactive component reactance being precisely determined, the traveling power from one antenna to another could cancel out the undesired power wave induced by mutual coupling, resulting in the high port isolation. The decoupling theory is rigorously derived with the design procedure of the PDN systematically …

Pseudo-Stereo Audio Processor, Zachariah David Bunce

Electrical Engineering

Due to both technical and resource limitations, non-professional audio production must often record with a single microphone, creating a mono audio signal. Even some originally multi-channel audio files often combine the separate channels into a single channel to save memory. However, this channel limitation makes any music held within the audio duller during listening. The Pseudo-Stereo Audio Processor remedies this situation, introducing a quadrature phase shift onto a given single-channel audio signal, producing multiple phase shifted output signals. These separate fixed-phase output signals are then recombined to produce a variable phase difference, emulated two-channel version of the input signal, allowing …

Apollo Photovoltaic Overview And Assessment, Andrew S. Hollis, James P. Tran, Andes Le, Regita Soetandar

Electrical Engineering

This senior project aims to take the various data sheets provided to us by PIVVIR Solar, the organization in charge of Apollo photovoltaic power plant, and perform an overall assessment as well as condensing the information into a more digestible and concise document. Currently, the documents provided to us by PIVVIR Solar are scattered and disorganized. Our goal is to take what we understand about photovoltaic power plants and combine it with the Apollo plant’s datasheets and summarize everything into one focused document that more readers can understand.

Portable Electrocardiogram Device And Signal Processing Design, Ryan F. Blaalid

Electrical Engineering

Full 12-lead electrocardiogram (ECG) measurements require inconvenient and time consuming adhesive electrode placement. This project proposes a design for a Bluetooth based ECG for remote patient measurement. The device is designed to measure up to 6-leads and utilizes 5 dry (non-adhesive) electrodes to accomplish this. The device delivers the ECG data to the user’s mobile smart phone and can then be sent to the patient’s doctor for analysis. Since the contact of the dry electrodes to the skin is not perfect, low-frequency noise called baseline wandering is introduced. A signal processing technique borrowed from image processing called morphological filtering is …

Dc-Dc Buck-Boost Converter For Energy Harvesting From Exercise Equipment, David T. Bolla

Electrical Engineering

This senior project helps harvest the excess energy that exercise equipment generates. Sustainable energy acts as the main target for this project, and it attempts this through reusing the energy created when exercising on elliptical machines. An elliptical machine outputs voltages between approximately 5V and 60V, and a micro-inverter requires an input voltage of about 36V. This DC-DC converter takes the variable output voltage of an elliptical machine and brings it to approximately 36V. Re-purposing the excess energy an elliptical user creates for the grid provides a sustainable alternative to dissipating the energy as heat. This project, along with other …

Cal Poly Ee 518 Electric Power Protection Laboratory, Richard Terre, Vincent Tham, Austin Kurth

Electrical Engineering

Facing a rapidly-changing power industry, the electrical engineering department at Cal Poly San Luis Obispo proposed Advanced Power Systems Initiatives to better prepare its students for entering the power industry. These initiatives call for the creation of a new laboratory curriculum that utilizes microprocessor-based relays to reinforce the fundamental concepts of power system protection.

The electric power protection laboratory (EPPL) senior project is the validation of lab manuals written for the planned EE-518 power system protections laboratory looking to be offered in Spring 2020 alongside the current lecture class under the same designation. This report evaluates the lab manual, verifies …

Fault Detection And Estimation For A Class Of Nonlinear Distributed Parameter Systems, Hasan Ferdowsi, Jia Cai, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a new model-based fault detection and estimation framework for a class of multi-input and multi-output (MIMO) nonlinear distributed parameter systems (DPS) described by partial differential equations (PDE) with actuator and sensor faults. The fault functions cover both abrupt and incipient faults. A Luenberger type observer is used to monitor the health of the DPS as a detection observer on the basis of the nonlinear PDE representation of the system with measured output vector. By taking the difference between measured and estimated outputs from this observer, a residual signal is generated for fault detection. If the detection residual …

Design And Fabrication Of Algaas-Based 1.8ev Schottky Solar Cell, Amirhossein Ghods, Vishal Saravade, Andrew Woode, Chuanle Zhou, Ian T. Ferguson

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, Schottky junction solar cells fully based on Al0.3Ga0.7As with optical band gap energy of 1.8 eV are designed, fabricated, and characterized. In solar cells based on AlGaAs/GaAs heterostructure, AlGaAs is mostly used as window or electron barrier layer, while GaAs is used as active photon absorbing layer. This work is among the first reports of AlGaAs based Schottky solar cells. AlGaAs/GaAs heterojunction grown using molecular beam epitaxy (MBE) is used for fabrication of photovoltaic devices. Photovoltaic properties of solar cells are reported, along with experimental details of device fabrication and characterization. The optimized bandgap energy of 1.8eV …

Effect Of Gate Voltage On The Photovoltaic Performance Of Gaas-Based Schottky Junction Solar Cells, Amirhossein Ghods, Vishal Saravade, Andrew Woode, Chuanle Zhou, Ian T. Ferguson

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, the effect of external gate voltage on GaAs-based metal-semiconductor (MS) Schottky solar cells is investigated. Subsequent changes in photovoltaic characteristic properties of the solar cells are extracted, reported and explained. Under positive gate voltages, the open-circuit voltage and short-circuit current density measured at collector are significantly increased due to the drift of holes from gate junction to the collector (forward bias condition of gate junction). However, there is slight increase in open-circuit voltage under reverse gate voltages, where only thermally generated electrons drift toward the collector junction. Moreover, negative gate voltage on insulated gate contact has resulted …

An Examination Into The Defining Characteristics Of Flexible Solar Aircraft Configurations Through Optimization, Taylor Mcdonnell, Andrew Ning

Faculty Publications

This paper examines the defining characteristics of various solar aircraft configurations through gradient-based multidisciplinary design optimization. We first present a general gradient-based solar aircraft optimization framework which accounts for nonlinear aeroelastic effects resulting from structural flexibility. We then apply this framework to several discrete SR- HALE aircraft geometric, structural, and propulsion system configuration choices to determine the defining characteristics of each configuration choice.

Williston Basin Water Treatment Technology Test Bed, University Of North Dakota. Energy And Environmental Research Center

EERC Brochures and Fact Sheets

Fact sheet about Energy & Environmental Research Center plan to pilot-test technology to treat high-TDS (total dissolved solids) water. Includes a description of proposed water treatment technology and plan for the testing process. [This item is an outdated or superseded version and retained for historical purposes only. It may no longer reflect current information, policies, or practices.]

Transient Analysis Of Diffusion-Induced Deformation In A Viscoelastic Electrode, Yaohong Suo, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

In this study, we analyze the transient diffuse-induced-deformation of an electrode consisting of the conducting polymer polypyrrole (PPY) by using the theories of linear viscoelasticity and diffusion-induced stress. We consider two constitutive relationships with dependence of viscosity on strain rate: Kelvin-Voigt model and three-parameter solid model. A numerical method is used to solve the problem of one-dimensional, transient diffusion-induced-deformation under potentiostatic operation. The numerical results reveal that the maximum displacement occurs at the free surface and the maximum stress occurs at the fixed end. The inertia term causes the stress to increase at the onset of lithiation. The stress decreases …

Audubon Parkway Slab Lifting At Mp 22.75 — Bridge Approach And Departure Settlement, Tim C. Scully Jr.

Kentucky Transportation Center Research Report

The approach/departure Portland Cement Concrete (PCC) panels on the eastbound and westbound side of Audubon Parkway at MP 22.75 over route KY 2120 began to exhibit settlement and cracking in a few locations, which created an uncomfortable ride for motorists. To address this problem, the Kentucky Transportation Cabinet (KYTC) contracted with MasterDry to repair the PCC panel settlement. MasterDry claims that its two-part polyurethane material expands into a rigid foam that fills voids, stabilizes slabs, and lifts concrete. The polyurethane material is injected through 5/8-inch holes drilled in the PCC panel. Once injected, a chemical reaction converts the liquid urethane …