Engineering Commons^™

Evaluating Variability Of Urban Land Surface Temperatures Using Drone Observations, Joseph Naughton

Master's Theses (2009 -)

Temperature represents one of the largest impairments for rivers and streams across the United States. In Wisconsin alone, over 17 miles of streams are impaired for temperature. This situation is projected to get worse as urban development and climate change accelerate thermal stress on aquatic environments. Management solutions require accurate and reliable models that represent rainfall-runoff temperature dynamics – particularly the characterization of land surface temperatures and how this translates to urban runoff. However, current models may not reflect the thermal profiles of real-world systems because they rely on in-situ equipment limited to point measurements. Limited studies have considered the …

A Continuous And Static Water Contaminant Detection System Using Rf Microwave Principles, Rafee Mahbub

Master's Theses (2009 -)

A continuous, static, and non-interfering water contaminant detection method is presented to measure specific water contaminants (NaCl, MgCl2, and mixture of NaCl and MgCl2) using RF microwave principles. A coil is mounted on the surface of a glass tube and the liquid sample is placed inside of the tube. An external magnetic field generated by the coil continuously measures changes in radio frequency energy. The non-contact feature of the device allows a long sensor lifetime with high sensitivity for real-time measurements. The measurement parameter is reflection coefficient (S11) and the operating frequency is 10 MHz – 5 GHz. For NaCl …

Pedaling Asymmetry During Lower Limb Pedaling After Stroke, Benjamin Rappaport

Master's Theses (2009 -)

People with stroke pedal asymmetrically. There may be differences in their pedaling kinetics between their non-paretic and paretic lower limbs and compared to healthy age matched controls. Previous studies have measured pedaling related impairments and impairments with interlimb coordination using electromyography (EMG). These studies did not use torque as a measurement for pedaling related impairments and interlimb coordination impairments. Pedaling symmetry in the laboratory measuring the torque and work production will fill the gaps of the knowledge about motor compensation during lower limb pedaling. As well, pedaling symmetry has not been measured during fMRI because of the inability to measure …

Low-Cost, Water Pressure Sensing And Leakage Detection Using Micromachined Membranes, Farhana Anwar

Master's Theses (2009 -)

This work presents the only known SOI membrane approach, using Microelectromechanical systems (MEMS) fabrication techniques, to address viable water leakage sensing requirements at low cost. In this research, membrane thickness and diameter are used in concert to target specific stiffness values that will result in targeted operational pressure ranges of approximately 0-120 psi. A MEMS membrane device constructed using silicon-on-insulator (SOI) wafers, has been tested and packaged for the water environment. MEMS membrane arrays will be used to determine operational pressure range by bursting.Two applications of these SOI membranes in aqueous environment are investigated in this research. The first …

Local Density Parameters With Respect To Powder Metal Sintering Process, Jungu Kang

Master's Theses (2009 -)

Mapping of local density fractions and a mathematically approximated density fraction model of sintered powder metal were studied in this research. Specimens were studied utilizing an image analysis software, HCImage, and local density fraction maps were acquired for each sintering condition. A regression function of sintering temperature, sintering time, radius and depth was then derived from the local density fractions. The experimental procedures including specimen preparation, image analysis, and data analysis are demonstrated in detail within this research. Through the local density maps and the regression function, two objectives were sought as follow:1. Determination of the density fraction gradient …

Correlating Pressure, Fluidization Gas Velocities, Andsolids Mass Flowrates In A High-Pressurefluidized Bed Coal Feed System, Jacob Talailetalalelei Tuia

Theses and Dissertations

The goal of this thesis was to understand what parameters would be most impactful when delivering dry, pulverized coal in a dilute-phase, with a high-pressure feed-system to a pressurized oxy-combustion (POC) reactor. Many studies have conveyed materials in dense-phase plugs at high-pressure or in dilute-phase flows at atmospheric pressure. Very few studies have fluidized and conveyed materials in dilute-phase flows at high pressure, as we needed to. Additionally, studies which might have been applicable based upon system -pressure and -phase delivered findings that were empirically based and therefore not specifically applicable to non-similar systems. 220 different tests were ran using …

Joint Analysis Of And Applications For Devices With Expanding Motions, Kendall Hal Seymour

Theses and Dissertations

Origami has been extensively studied by engineers for its unique motions and ability to collapse to small volumes. Techniques have been studied for replicating origami-like folding motion in thick materials, but limited practical applications of these techniques have been demonstrated. Developable mechanisms are a new mechanism type that has a similar ability to collapse to a low profile. The cylindrical developable mechanism has the ability to emerge from and conform to a cylindrical surface. In this work, a few practical applications of devices with novel expanding motions are presented. The design and testing of an origami-inspired deployable ballistic barrier, which …

Feasibility Study Of Intelligent Lvad Control For Optimal Heart Failure Therapy., John A. Karlen Iii

Electronic Theses and Dissertations

Background: Left ventricular assist devices (LVAD) are operated at constant speeds (rpm), consequently, pump flow is passively determined by the pressure difference between the LV and aorta. Since the diastolic pressure gradient (~70 mmHg) is much larger than the systolic gradient (~10 mmHg), the majority of pump flow occurs during systole. This limitation results in sub-optimal LV volume unloading, LV washing, and diminished vascular pulsatility that may be associated with increased risk for clinically-significant adverse events, including stroke, bleeding, arteriovenous malformations, and aortic insufficiency. To address these clinical adverse events, an intelligent control strategy using pump speed modulation was developed …

Simulation Of A Continuum Tumor Model Using Distributed Computing., Dylan A Goodin

Electronic Theses and Dissertations

Mathematical modeling aims to provide a theoretical framework for understanding tissue dynamics and for establishing treatment response for diseased tissues, such as tumors. Previously published continuum models have successfully represented idealized two-dimensional and three-dimensional tissue for short periods of time. A recently published continuum model of cancer increases model complexity and describes three-dimensional tissue that, due to the required complexity of the geometric multigrid solver, can only be feasibly applied to millimeter-scale simulations. Furthermore, the computational cost for such models has hindered their application in the laboratory and in the clinic. With computational demands greatly outpacing current openMP-based approaches on …

Optimization And Hardware Implementation Of Syba-An Efficient Feature Descriptor, Samuel Gaylin Fuller

Theses and Dissertations

Feature detection, description and matching are crucial steps in many computer vision algorithms. These rely on feature descriptors to be able to match image features across sets of images. This paper discusses a hardware implementation and various optimizations of our lab's previous work on the SYnthetic BAsis feature descriptor (SYBA). Previous work has shown that SYBA can offer superior performance to other binary descriptors, such as BRIEF. This hardware implementation on an FPGA is a high throughput and low latency solution, which is critical for applications such as: high speed object detection and tracking, stereo vision, visual odometry, structure from …

Ultra Low Latency Visual Servoing For High Speed Object Tracking Using Multi Focal Length Camera Arrays, Alexander Steven Mccown

Theses and Dissertations

In high speed applications of visual servoing, latency from the recognition algorithm can cause significant degradation of in response time. Hardware acceleration allows for recognition algorithms to be applied directly during the raster scan from the image sensor, thereby removing virtually all video processing latency. This paper examines one such method, along with an analysis of design decisions made to optimize for use during high speed airborne object tracking tests for the US military. Designing test equipment for defense use involves working around unique challenges that arise from having many details being deemed classified or highly sensitive information. Designing tracking …

Controlling Co Dose From Corm-Loaded Electrospun Scaffolds With Diffusion-Based Modeling And Experimental Assessment Of Endothelial Cell Response, Kenyatta S. Washington

Theses and Dissertations

Cardiovascular disease (CVD) accounts for one in every five deaths in the United States alone due to occlusion in small diameter (< 6 mm) vessels. The current treatment options includes bypass grafting; however, more than 30 percent of patients do not have viable saphenous veins for autologous grafting [1]. Therefore, tissue engineering is being considered as an alternative approach. The overall goals of this project were to develop a tissue engineered vascular graft with the incorporation of carbon monoxide releasing molecules (CORMs) and to determine the impacts of carbon monoxide (CO) on endothelial cells (ECs) with the goal of promoting a functional endothelium within the graft. This was accomplished through two complementary studies: investigating the impacts of CO-loaded electrospun scaffolds on ECs for cardiovascular applications and diffusion-based modeling of drug delivery of gasotransmitters from tissue engineered scaffolds. In the first study, we extended the maximum in vitro incubation time to permit better cellular attachment and proliferation with a newly-synthesized, more hydrophobic CORM (DK3) and established the impact of CORMs on EC viability and function (e.g. reactive oxygen species (ROS) products, and ROS levels). We further investigated toxicity and biocompatibility of a newly synthesized CORM (DK4) loaded within PCL thin films and nanoparticles. We concluded that the DK4 and other compounds are not toxic at doses ranging from 0 – 50 μg/mL to the ECs both within nanoparticles that can be internalized within cells. We also conducted an in vivo pilot study to determine graft biocompatibility and preliminary results showed that CORM implants maintain mechanical integrity, support blood flow, and do not show toxicity for up to six weeks. In the second study, we validated a computational model and analyzed the output of CO delivery to better understand and control local dose. For CO release, this model is necessary because of the limitations with real-time experimental analysis and the need to better understand the dose available to the cells. We demonstrated that the validated model can be used to predict drug availability to cells for a variety of scaffolds and drug molecules. Our simulated results suggest that only a fraction of the initial concentration of gasotransmitters released from fibers that enters the interstitial fluid in vivo, or culture media in vitro, will be available to cells. We also demonstrated that fiber orientation and fiber diameter are important for drug delivery, but fiber density provides even more important information. The more contact area within the fiber scaffolds is equivalent to experimental conditions with more cell attachment and spreading. These parameters are not only important for traditional tissue engineering, but also for drug delivery. Overall, these results demonstrate the feasibility of making a tissue engineered vascular graft with the incorporation of CORMs and validating he importance of computational modeling of diffusion-based transport of CO. Future work will involve performing surface modifications to enhance cell attachment and proliferation, using the developed computational model to better predict dose available to cells, and experimentally determining impact of CO dose on ECs.

Integrating A Modified Pulse Amplitude Modulation (Pam4) Scheme With Two Spatially Multiplexed Channels In Optical Fiber Communication Systems, Bilas Chowdhury

Theses and Dissertations

A multi-input multi-output (MIMO) based optical fiber multiplexing architecture known as Spatial Domain Multiplexing (SDM) adds a new dimension to optical fiber communication systems by spatially reusing the optical frequencies. SDM allocates different spatial location for different input signals based on the input launch angles. These input signals propagate helically inside the carrier fiber. They abide total internal reflection and exit as concentric donut shaped rings while travelling the fiber. These SDM channels do not exhibit any crosstalk or intersymbol interference. SDM systems can also complement different modulation techniques such as Return to Zero (RZ), Non-Return to Zero (NRZ), and …

Survival Theory Modelling For Information Diffusion, Akshay Aravamudan

Theses and Dissertations

Information diffusion is the spread of information within a network. In this thesis, we model information diffusion as a survival process. We have adopted an existing algorithm called NetRate for modelling information diffusion. This model involves finding the distribution of trasmission time between two nodes in the network. We modify NetRate’s concave-down log-likelihood expression by adding partial parentage information and formulate an Expectation-Minimization (EM) algorithm to learn the parameters. We also describe a simulation scheme for NetRate inspired by point process simulation strategies. Using the assumptions of the NetRate model, we derive a a method to model popularity as a …

Performance Analysis Of A Parabolic Trough Solar Collector, Feras Abdullah Mohammed Alghamdi

Theses and Dissertations

Solar energy technologies are growing vastly in both developed and developing countries. The parabolic trough solar collector (PTSC) technology is the most widely used system among concentrated solar technologies. In this thesis, three models were developed to investigate the performance of the PTSC; these models are 2D & 3D numerical models and 1D analytical model. Each model considers three absorber tube configurations, vacuum annulus, air-filled annulus, and bare absorber tube. The specifications of the Luz LS-2 PTSC were used throughout the study. Since the study considers the 3D model, a realistic non-uniform heat flux distribution around the receiver tube was …

Redeployment And Demonstration Of The Video Guidance Sensor For Proximity Maneuvers, Xiangyi Li

Theses and Dissertations

This paper presents the redeployment and demonstration of the Photogrammetric Video Guidance Sensor (PVGS) as a position and attitude sensor for proximity maneuvers and formation flight of small spacecraft. The original PVGS was developed to use a smartphone as its hardware and an Android application as its software; however, this paper provides a possibility for using a smaller and cheaper single-board computer, Raspberry Pi as new hardware, and for using a Java program run in Linux as its software. We finally achieved the approximate performance compared to the original PVGS. At the current stage, a PID controller was supposed to …

Dual-Modality Smartphone-Based Fiber-Optic Microendoscope System For Early Detection Of Cervical Neoplasia, Xiangqian Hong

Dissertations (1934 -)

Cervical cancer remains the leading cause of death for women in low middle-income countries (LMICs), where the incidence and mortality of cervical cancer are disproportionately high. Due to the poor medical conditions and lack of resources, the benefits of early screening methods such Pap smear and HPV test have yet to be realized in these areas. The more viable screening option - visual inspection with acetic acid (VIA) is relatively easier to implement and lower in cost. However, the effectiveness of VIA on the early detection of cervical cancer is still in question because of its low specificity, which may …

Construction Labor Productivity Benchmarking: A Comparison Between On-Site Construction And Prefabrication, Emad Nadi

Dissertations (1934 -)

Construction labor productivity has been declining over the past sixty years, which has caused a decline in overall construction productivity. The traditional ways of managing construction projects and their delivery have evolved into an inherently inefficient and adversarial process. There was always a need to improve the way construction elements are constructed and delivered to the job site such as adopting lean construction. One way to achieve this goal is to prefabricate the construction elements off site and then deliver them to the site for installation. Prefabrication is a process of assembling building components in a remote location using a …

High Dimensional Data Clustering Using Self-Organized Map, Ruth Ema Febrita, Wayan Firdaus Mahmudy, Aji Prasetya Wibawa

Knowledge Engineering and Data Science

As the population grows and e economic development, houses could be one of basic needs of every family. Therefore, housing investment has promising value in the future. This research implements the Self-Organized Map (SOM) algorithm to cluster house data for providing several house groups based on the various features. K-means is used as the baseline of the proposed approach. SOM has higher silhouette coefficient (0.4367) compared to its comparison (0.236). Thus, this method outperforms k-means in terms of visualizing high-dimensional data cluster. It is also better in the cluster formation and regulating the data distribution.

Implementation Of View Factor Model And Radiative Heat Transfer Model In Moose, Abdurrahman Ozturk

Theses and Dissertations

View factors are functions that represent the geometric relationship between surfaces. They are important parameters for radiative heat transfer calculations. View factor catalogues are available for simple geometries in the current literature. However, in the case of complicated geometry, analytical or numerical methods are needed to evaluate view factors. The Monte Carlo (MC) method is the most flexible one among numerical methods, which are used to calculate view factors, since it can be applied to any geometry.

When experimental studies are not affordable to conduct, modeling of engineering problems gains more importance. Idaho National Laboratory (INL)’s finite element framework Multiphysics …

Fractional Order And Virtual Variable Sampling Design Of Repetitive Control For Power Converters, Zhichao Liu

Theses and Dissertations

With the growth of electricity demand and renewable energy power source, power converter becomes a more and more significant component in electrical power systems. The requirement of the power converter controller is to produce an accurate and low-distorted voltage or current under different load conditions. Although the conventional controller can meet the requirement of some applications, it requires accurate knowledge of the system model and cannot provide a satisfactory result especially under nonlinear loads or sudden load change. Repetitive control (RC) presents an attractive solution to achieve excellent steady-state tracking error and low total harmonic distortion for periodic signals, and …

Dc Bus Stabilization And Dynamic Performance Improvement Of A Multi-Converter System, Silvia Arrua

Theses and Dissertations

Evolution of semiconductor devices is allowing to implement power electronics technology in a variety of applications, moving traditional AC systems to more efficient and reliable DC systems. Some examples are shipboard power distribution systems, DC microgrids, electric vehicles and more electric aircrafts. Even though these types of systems offer significant advantages that make them attractive in different areas, the interconnection of feedback-controlled power converters leads to emergent dynamic behavior that a system designer must take into account to ensure proper operation of the system. Additionally, system reconfiguration is very likely to happen in applications such as a shipboard power distribution, …

The Contribution Of Adipose Tissue From Ovariectomized Mice To Colon Cancer, Meredith Smith Carson

Theses and Dissertations

Obesity is considered a major public health concern worldwide due to the increased incidences of metabolic dysfunction and cancer risk. The obese state is, in part, attributable to the overconsumption of calorie-dense foods commonly seen in a standard Western diet, which aids in the progression of chronic, lowgrade inflammation. The role of estrogen varies depending on menopausal status, where estrogen deficiency coupled with increased visceral fat associated with post-menopause leads to increased secretions of pro-inflammatory adipokines and cytokines. However, the presence of estrogen in a premenopausal state has been shown to attenuate the pro-inflammatory response, which has been demonstrated when …

Carbon Nanotube And Cellulose Nanocrystal Hybrid Films, Mingzhe Jiang, Robert Seney, Paul Charles Bayliss, Christopher L. Kitchens

Publications

The use of cellulose nanocrystals (CNC) in high performance coatings is attractive for micro-scale structures or device fabrication due to the anisotropic geometry, however CNC are insulating materials. Carbon nanotubes (CNT) are also rod-shaped nanomaterials that display high mechanical strength and electrical conductivity. The hydrophobic regions of surface-modified CNC can interact with hydrophobic CNT and aid in association between the two anisotropic nanomaterials. The long-range electrostatic repulsion of CNC plays a role in forming a stable CNT and CNC mixture dispersion in water, which is integral to forming a uniform hybrid film. At concentrations favorable for film formation, the multiwalled …

Intelligent Software Tools For Recruiting, Swatee B. Kulkarni, Xiangdong Che

Journal of International Technology and Information Management

In this paper, we outline how recruiting and talent acquisition gained importance within HRM field, then give a brief introduction to the newest tools used by the professionals for recruiting and lastly, describe the Artificial Intelligence-based tools that have started playing an increasingly important role. We also provide further research suggestions for using artificial intelligence-based tools to make recruiting more efficient and cost-effective.

Table Of Contents Jitim Vol 28 Issue 2, 2019

Journal of International Technology and Information Management

Table of Contents JITIM 2, 2019

Zac: A Zone Path Construction Approach For Effective Real-Time Ridesharing, Meghna Lowalekar, Pradeep Varakantham, Patrick Jaillet

Research Collection School Of Computing and Information Systems

Real-time ridesharing systems such as UberPool, Lyft Line, GrabShare have become hugely popular as they reduce the costs for customers, improve per trip revenue for drivers and reduce traffic on the roads by grouping customers with similar itineraries. The key challenge in these systems is to group the right requests to travel in available vehicles in real-time, so that the objective (e.g., requests served, revenue or delay) is optimized. The most relevant existing work has focussed on generating as many relevant feasible (with respect to available delay for customers) combinations of requests (referred to as trips) as possible in real-time. …

Developing An Automation Locus Of Control Scale, Maarten Nelson Devon Edwards

Theses and Dissertations

The industrial and domestic proliferation of automation is such that it has become a core component of the human experience. Both automation design paradigms and human performance must be scrutinized in order to ensure the safety, security, effectiveness and efficiency of man-machine systems across a multitude of domains (Fitts, 1951; Parasuraman, Sheridan, & Wickens, 2000; Rasmussen, 1983). Therefore, the purpose of this study was to develop and validate a measure for the evaluation of control perceptions in the context of human-automation interactions. The scale was developed using a deductive approach to measure development adapting from Rotter (1966) and Levenson (1973) …

Gene Expression Studies For Analyzing Effects Of Space Radiation In Tissues, Amatulshakoor Mohammed Farooqui

Theses and Dissertations

Human exploration beyond the earth's orbit poses many risks for the crew on these missions. One of the major health risks is exposure to space radiation environment beyond the earth’s magnetic field. The space environment exposes astronauts to high levels of ionizing radiation such as galactic cosmic rays. The radiations can have acute and delayed effects on the human body. The primary response to tissue injury is increased oxidative stress and inflammation. The overall objective of this study was to analyze the effects of ionizing radiation in heart tissue by quantifying its impact on the expression of genes that correlate …

Analysis Of Pile Driving Monitoring Equipment, Robert Joseph Rogulski Iii

Theses and Dissertations

Rebound is a problem affecting pile driving in Florida. Significant rebound can require excessive blows for a pile to reach bearing capacity and may damage the pile. In order to study rebound, precise instrumentation is required. For that reason, the objective of this thesis is to evaluate the Inopile’s Pile Driving Monitor (PDM) as a tool for measuring the rebound of large diameter pre-stressed concrete piles driven with open ended diesel hammers. Six sites from Florida were selected for testing. Five of the sites had pile driving and two of them had standard penetration testing (which was used as an …