Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 65581 - 65610 of 197014

Full-Text Articles in Engineering

Performance Of Drilled Shaft Under Combination Of Complicated Loads Under Hurricane Event, Jie Huang, Sazzad Bin-Shafique Sep 2019

Performance Of Drilled Shaft Under Combination Of Complicated Loads Under Hurricane Event, Jie Huang, Sazzad Bin-Shafique

Publications

This project includes experimental and numerical studies to investigate and assess the impact of vertical loads on a laterally loaded drilled shaft under various conditions. The experimental study includes lab testing and lab-scale load test to examine a drilled shaft subjected to vertical and lateral loads at a reduced scale. With the data obtained from the lab-scale testing, a numerical model was calibrated, which was used to perform a parametric study to scrutinize the effect of many possible factors such as soil stiffness, soil friction angle, and drilled shaft geometry. With all the factors considered in this study, the vertical …

Go to article

Investigation Of Physical And Dynamic Properties Of High Porous Concrete, Ildar Akhmadullin Sep 2019

Investigation Of Physical And Dynamic Properties Of High Porous Concrete, Ildar Akhmadullin

Publications

This project pursued two main objectives: (1) providing opportunities to Baton Rouge Community College (BRCC) students to develop hands-on laboratory skills and exposure to the transportation field, and (2) investigating porous concrete properties. Several BRCC student groups performed the work presented within this report; students prepared samples with different porosity and permeability according to standard specifications. The testing of the samples was performed at the Louisiana Transportation Research Center (LTRC) facility under the supervision of LTRC specialists. Findings indicate that the porosity of samples is backward proportional to the compression strength. This function is not linear but can be estimated …

Go to article

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya Sep 2019

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya

Publications

This research focused on investigating a highly sustainable and efficient reinforced concrete structural member for future infrastructure by utilizing emerging high-performance materials. These materials include ultra-high-performance fiber-reinforced concrete (UHP-FRC) and corrosion-resistant high-strength fiber-reinforced polymer (FRP) bars. Four reduced scale UHP-FRC specimens were tested under large displacement reversals to prove the proposed new ductile-concrete strong-reinforcement (DCSR) design concept by fully utilizing these ultra-high-performance materials. Micro steel fibers were incorporated into three specimens and ultra-high molecular weight polyethylene fibers were blended into the fourth specimen. One specimen with ASTM A1035 MMFX high-strength steel rebars, one with high-strength glass fiber reinforced polymer (GFRP) …

Go to article

Evaluating How The Quality Of Pedestrian Infrastructure Affects The Choice To Walk, Gregory Rowangould, Alexis Corning-Padilla Sep 2019

Evaluating How The Quality Of Pedestrian Infrastructure Affects The Choice To Walk, Gregory Rowangould, Alexis Corning-Padilla

Publications

While the benefits of walking are well understood, the physical design of sidewalks and their maintenance needs generally receive much less attention in both research and practice than the infrastructure used by other modes of transportation. As a result, we know comparatively little about how the design of sidewalks and quality of the overall pedestrian environment affect the decision to walk. In our study we conducted a household travel survey to collect data on walking frequency and attributes related to sidewalk quality and the quality of the walking environment in Albuquerque, New Mexico. We used summary statistics and statistical modeling …

Go to article

Pairing Electrostatic Levitation With Triboelectric Transduction For High-Performance Self-Powered Mems Sensors And Actuators, Mark Pallay, Alwathiqbellah I. Ibrahim, Ronald N. Miles, Shahrzad Towfighian Sep 2019

Pairing Electrostatic Levitation With Triboelectric Transduction For High-Performance Self-Powered Mems Sensors And Actuators, Mark Pallay, Alwathiqbellah I. Ibrahim, Ronald N. Miles, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

We demonstrate that an electrostatic levitation MEMS switch can be operated by applying mechanical pres- sure to a triboelectric generator. The toggling mechanism of the switch draws no current but requires a high actuating voltage, while the generator can supply a high voltage but only produces microwatts of power. The synergistic combination results in an entirely self-powered sensor and switch; the normally-closed MEMS switch can be toggled open by applying a threshold force to the generator without the need for any outside power or supplementary circuitry. A model of the MEMS switch and electrostatic force is validated with experimental data. …

Go to article

Autonomous And Resilient Management Of All-Source Sensors For Navigation Assurance, Juan D. Jurado Sep 2019

Autonomous And Resilient Management Of All-Source Sensors For Navigation Assurance, Juan D. Jurado

Theses and Dissertations

All-source navigation has become increasingly relevant over the past decade with the development of viable alternative sensor technologies. However, as the number and type of sensors informing a system increases, so does the probability of corrupting the system with sensor modeling errors, signal interference, and undetected faults. Though the latter of these has been extensively researched, the majority of existing approaches have constrained faults to biases, and designed algorithms centered around the assumption of simultaneously redundant, synchronous sensors with valid measurement models, none of which are guaranteed for all-source systems. This research aims to provide all-source multi-sensor resiliency, assurance, and …

Go to article

Nondestructive Electromagnetic Characterization Of Perfect-Electric-Conductor-Backed Uniaxial Materials, Adam L. Brooks Sep 2019

Nondestructive Electromagnetic Characterization Of Perfect-Electric-Conductor-Backed Uniaxial Materials, Adam L. Brooks

Theses and Dissertations

As the use of anisotropic materials in electromagnetic applications continues to proliferate, it becomes increasingly important to develop non-destructive evaluation methods for those materials in their installed configuration. In many applications, these materials are permanently affixed onto conducting bodies to reduce unwanted reflections, making it impossible to collect S21 or S12 transmission measurements as used in many techniques based on the well-known Nicolson-Ross-Weir algorithm. It also makes it impractical to reorient the sample to collect orthogonal measurements aligned with the optical axes of the anisotropic material. The goal of this research is to develop a two-reflection coefficient measurement …

Go to article

Me-Em Enewsbrief, September 2019, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University Sep 2019

Me-Em Enewsbrief, September 2019, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Go to article

Competency Based Education: A Framework For A More Efficient And Safer Aviation Industry, Flavio A. C. Mendonca Ph.D., Julius Keller Ph.D., Brian G. Dillman Ph.D. Sep 2019

Competency Based Education: A Framework For A More Efficient And Safer Aviation Industry, Flavio A. C. Mendonca Ph.D., Julius Keller Ph.D., Brian G. Dillman Ph.D.

Publications

Aircraft design and reliability as well as pilots’ education and training have steadily and significantly improved in the last 20 years. Nevertheless, high-profile accidents still occur, even when the aircraft and related systems are operating adequately. Controlled flight into terrain, runway incursions accidents, and loss-of-control-in-flight are examples of mishaps in which inadequate decision-making, poor leadership, and ineffective communication are frequently cited as contributing factors. Conversely, the investigation of accidents (e.g., US Airways Flight 1549, in US, in 01/15/2009) and serious incidents (e.g., JJ 3756, in Brazil, in 06/17/2011) have indicated that flight crews have to be flexible and adaptable, think …

Go to article

Combining Virtual Reality And Machine Learning For Enhancing The Resiliency Of Transportation Infrastructure In Extreme Events, Supratik Mukhopadhyay, Yimin Zhu, Ravindra Gudishala Sep 2019

Combining Virtual Reality And Machine Learning For Enhancing The Resiliency Of Transportation Infrastructure In Extreme Events, Supratik Mukhopadhyay, Yimin Zhu, Ravindra Gudishala

Publications

Traffic management models that include route choice form the basis of traffic management systems. High-fidelity models that are based on rapidly evolving contextual conditions can have significant impact on smart and energy efficient transportation. Existing traffic/route choice models are generic and are calibrated on static contextual conditions. These models do not consider dynamic contextual conditions such as the location, failure of certain portions of the road network, the social network structure of population inhabiting the region, route choices made by other drivers, extreme conditions, etc. As a result, the model’s predictions are made at an aggregate level and for a …

Go to article

Integrated Full-Scale Physical Experiments And Numerical Modeling Of The Performance And Rehabilitation Of Highway Embankments, Navid Jafari, Anand Puppala, Sayantan Chakraborty, Burak Boluk Sep 2019

Integrated Full-Scale Physical Experiments And Numerical Modeling Of The Performance And Rehabilitation Of Highway Embankments, Navid Jafari, Anand Puppala, Sayantan Chakraborty, Burak Boluk

Publications

The study aimed to fundamentally understand how soil strength and hydraulic properties are impacted by recurring cycles of wetting and drying induced by climate variability, with the practical implication of forecasting the stability of highway embankment slopes. The review of literature on the effects of long-term cyclic wetting-drying phases on hydro-mechanical properties of clayey soils suggests that only a few cycles of wetting and drying can impact the strength and hydraulic conductivity, where the latter can increase several orders of magnitude. Laboratory model-scale experiments of Louisiana and Texas soils are still ongoing and will relate the laboratory test results to …

Go to article

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala Sep 2019

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala

Publications

Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and environmentally friendly alternative than OPC. This research explores methods to develop GPC with desired properties and evaluate their …

Go to article

Effects Of Organizational Trust And Project Delivery Variables On Bim User Confidence, Jason D. Lucas, Saw Sri Neeharika Vijayarao Sep 2019

Effects Of Organizational Trust And Project Delivery Variables On Bim User Confidence, Jason D. Lucas, Saw Sri Neeharika Vijayarao

The Professional Constructor

The use of Building Information Models (BIM) for construction planning has increased in all areas except for automated processes such as quantity take-off. Many model users lack confidence that a model, typically created by a third party, has accurate enough information in it to rely on the data for planning the project. This research is looking at how factors of organization trust and variables related to project delivery can raise user confidence in these situations. Factors of organizational trust were identified through a literature review. Two surveys were utilized to identify which factors were significant in raising user confidence. Finally, …

Go to article

Accuracy Of Drone Based Surveys To Measure Stockpile Volume, Joseph M. Burgett, Scott Shaffer, Eric Stuckey Sep 2019

Accuracy Of Drone Based Surveys To Measure Stockpile Volume, Joseph M. Burgett, Scott Shaffer, Eric Stuckey

The Professional Constructor

This paper outlines a two phase experiment evaluating the accuracy of volumetric calculations using a commercially available drone and structure-from-motion (SfM) software. In the first phase, a large cardboard pyramid with a known volume was used to simulate a stockpile. Using georeferenced images collected by a Phantom 4 Pro drone and the SfM software ContextCapture, the computed volumes ranged between 1.5% and 3.3% of the actual volume. In the second phase of the experiment, a photometric survey was created of a large SCDOT borrow pit. The volumetric calculations were computed using conventional survey practices and with drone collected images. There …

Go to article

Utilizing Trajectory Optimization In The Training Of Neural Network Controllers, Nicholas Kimball Sep 2019

Utilizing Trajectory Optimization In The Training Of Neural Network Controllers, Nicholas Kimball

Master's Theses

Applying reinforcement learning to control systems enables the use of machine learning to develop elegant and efficient control laws. Coupled with the representational power of neural networks, reinforcement learning algorithms can learn complex policies that can be difficult to emulate using traditional control system design approaches. In this thesis, three different model-free reinforcement learning algorithms, including Monte Carlo Control, REINFORCE with baseline, and Guided Policy Search are compared in simulated, continuous action-space environments. The results show that the Guided Policy Search algorithm is able to learn a desired control policy much faster than the other algorithms. In the inverted pendulum …

Go to article

Development Of A Tailored Flight Test Approach For Small Unmanned Aircraft Systems, Neil A. Wolfe Sep 2019

Development Of A Tailored Flight Test Approach For Small Unmanned Aircraft Systems, Neil A. Wolfe

Master's Theses

This document contains the details of a study conducted to determine an effective performance flight test approach specifically for small Unmanned Aircraft Systems (sUAS). This was done by taking proven procedures and documentation from the FAA and the Air Force for manned aircraft and tailoring them specifically for use with sUAS flight test programs. A ‘sUAS Flight Testing Handbook’ was created from the proceedings to aid commercial organizations and recreational developers conducting sUAS research without access to flight test experience. A performance flight test program was conducted with the AeroVironment RQ-20 Puma sUAS using the developed approach to verify that …

Go to article

A Comparison Of Crushing Parameters Of Graphite Composite Thin-Walled Cylinders Cured In Low And High Pressures, Trenton John Matson Sep 2019

A Comparison Of Crushing Parameters Of Graphite Composite Thin-Walled Cylinders Cured In Low And High Pressures, Trenton John Matson

Master's Theses

Out-of-Autoclave (OoA) processes for manufacturing aerospace-grade parts needs to be better understood to further the development and success of industries that are manufacturing reusable launch vehicles, military and commercial aircraft, and spacecraft. Overcoming the performance limitations associated with OoA, also known as low-pressure prepreg curing, methods (void count, energy absorption, etc.) will help decrease the costs associated with aerospace composite manufacturing and the negative environmental effects correlated with high-pressure composite curing methods. Experimental, theoretical, and numerical approaches are used to explore both low and high-pressure curing cycles and how the two different processes affect final cured parts. Quasi-static uniaxial compression …

Go to article

The Water/Energy Nexus: Climate, Consumption And Ecosystem Services, Hildegaard D. Link Sep 2019

The Water/Energy Nexus: Climate, Consumption And Ecosystem Services, Hildegaard D. Link

Dissertations, Theses, and Capstone Projects

Water and energy are drivers of living systems. This work provides an assessment of the Water Energy Nexus in the United States, comparing the well-watered north-east and the arid west. Electric grid systems are most stressed on hot summer afternoons. Grid stress can lead to cascading failures of electricity, water and wastewater treatment systems. (Zimmerman, 2017) Water for power generation and/or water supply depend on ecosystem services. The ecosystem services and resource trade-offs embedded in provision of a watt of power and an ounce of potable water, however, have yet to be comprehensively enumerated nor have the cost relationships been …

Go to article

A Volume-Force Synthetic Disturbance Approach For High-Fidelity Of Unsteady Fluid Structure Interactions, Marina Kazarina Sep 2019

A Volume-Force Synthetic Disturbance Approach For High-Fidelity Of Unsteady Fluid Structure Interactions, Marina Kazarina

Doctoral Dissertations and Master's Theses

The purpose of this dissertation is to analyze the momentum source model, for generating synthetic vortical disturbance field in numerical simulations of unsteady fluid-structure interactions, access limitations of this approach, to find requirements for the computational domain, space and time resolution, and apply this model to investigate selected physical problems. For this reason a comprehensive parametric study of volume-force based method of generating spectral synthetic turbulence inside the computational domain is conducted first. The method is then extended to synthesize turbulence with arbitrary energy spectrum. The synthetic turbulence is generated through momentum source terms in Navier-Stokes equations, and the developed …

Go to article

Commercial Construction Schedule Collaborators And Current Scheduling Practices, Evan D. Bingham, Jay P. Christofferson, Mark Hutchings Sep 2019

Commercial Construction Schedule Collaborators And Current Scheduling Practices, Evan D. Bingham, Jay P. Christofferson, Mark Hutchings

The Professional Constructor

Construction mangers use the project schedule to communicate aspects of construction timing critical to project success. These schedules may be created using the collaboration of multiple project stakeholders or be the creation of a single manager. The tools used to create and communicate the schedule could range from hand drawn to critical path computer software. Because these practices may vary from company to company, commercial construction mangers can benefit from an understanding of common scheduling practices in the industry. This paper is a report of findings for commercial contractors working in the western United States. Construction managers working for 23 …

Go to article

Attraction And Retention Of Minority Managerial Employees At Electrical Contractors, Ben F. Bigelow, Anthony J. Perrenoud, Anusree Saseendran Sep 2019

Attraction And Retention Of Minority Managerial Employees At Electrical Contractors, Ben F. Bigelow, Anthony J. Perrenoud, Anusree Saseendran

The Professional Constructor

Diversity in the managerial workforce in construction is limited, with a shortage of talent in the industry and the demand projected to grow over the next ten years. The challenge of attracting and retaining managerial talent is exacerbated for trade contractors as they have historically promoted management from the trades. This study explored differences, based on ethnicity, when it comes to factors that attract and retain managerial talent in electrical construction. Data was collected through a nationwide survey of management employees of electrical contractors. It was found that while some factors were influential for all ethnic groups, certain factors became …

Go to article

Building Information Model-Based Quantity Takeoff – Leadership Support And Training, Morgan Tagg, James P. Smith, Jay P. Christofferson, Kevin R. Miller Sep 2019

Building Information Model-Based Quantity Takeoff – Leadership Support And Training, Morgan Tagg, James P. Smith, Jay P. Christofferson, Kevin R. Miller

The Professional Constructor

Building Information Modeling (BIM) plays an important role in the modern construction industry. BIM models are tools that help stakeholders perform a variety of functions including communication, visualization, trade coordination, and clash detection. A less commonly utilized functionality of BIM that shows strong potential to improve efficiencies and reduce error is model-based quantity take off (QTO). The literature identifies eight challenges to implementing BIM QTO. This paper focuses on the leadership and training elements inherent to two of the identified challenges – 1) New skills and training, and 2) reluctance of employees to adopt. Through semi-structured interviews with estimators, preconstruction …

Go to article

A Data-Driven Load Shape Profile Based Building Benchmarking: Comparing Doe Reference Buildings With A Large Metering Dataset, Young June Park, Clayton Miller, Zoltan Nagy Sep 2019

A Data-Driven Load Shape Profile Based Building Benchmarking: Comparing Doe Reference Buildings With A Large Metering Dataset, Young June Park, Clayton Miller, Zoltan Nagy

Research Collection College of Integrative Studies

There are various sustainable policies or labeling programs in building energy benchmarking. However, they are often oriented for the static information of building performances. The installation of smart metering capabilities with building energy system generates unprecedented amount of data. By analyzing such data, buildings can be evaluated in a more comprehensive manner. We propose a data analytic framework to discover dominant load shape patterns and benchmark buildings with respect to these. We applied this method to a simulation dataset (256 DOE reference building models) and compared them to the results of an actual metering dataset (3,829 buildings). Using k-means clustering, …

Go to article

How Effective Are Toll Roads In Improving Operational Performance?, Sonu Mathew, Srinivas S. Pulugurtha Sep 2019

How Effective Are Toll Roads In Improving Operational Performance?, Sonu Mathew, Srinivas S. Pulugurtha

Mineta Transportation Institute

The main focus of this research is to develop a systematic analytical framework and evaluate the effect of a toll road on region’s traffic using travel time and travel time reliability measures. The travel time data for the Triangle Expressway in Raleigh, North Carolina, United States was employed for the assessment process. The spatial and temporal variations in the travel time distributions on the toll road, parallel alternate route, and near-vicinity cross-streets were analyzed using various travel time reliability measures. The results indicate that the Triangle Expressway showed a positive trend in reliability over the years of its operation. The …

Go to article

Efficient Distributed Reachability Querying Of Massive Temporal Graphs, Tianming Zhang, Yunjun Gao, Chen Lu, Wei Guo, Shiliang Pu, Baihua Zheng, Christian S. Jensen Sep 2019

Efficient Distributed Reachability Querying Of Massive Temporal Graphs, Tianming Zhang, Yunjun Gao, Chen Lu, Wei Guo, Shiliang Pu, Baihua Zheng, Christian S. Jensen

Research Collection School Of Computing and Information Systems

Reachability computation is a fundamental graph functionality with a wide range of applications. In spite of this, little work has as yet been done on efficient reachability queries over temporal graphs, which are used extensively to model time-varying networks, such as communication networks, social networks, and transportation schedule networks. Moreover, we are faced with increasingly large real-world temporal networks that may be distributed across multiple data centers. This state of affairs motivates the paper's study of efficient reachability queries on distributed temporal graphs. We propose an efficient index, called Temporal Vertex Labeling (TVL), which is a labeling scheme for distributed …

Go to article

Confusion And Information Triggered By Photos In Persona Profiles, Joni Salminen, Soon-Gyo Jung, Jisun An, Haewoon Kwak, Lene Nielsen, Bernard J. Jansen Sep 2019

Confusion And Information Triggered By Photos In Persona Profiles, Joni Salminen, Soon-Gyo Jung, Jisun An, Haewoon Kwak, Lene Nielsen, Bernard J. Jansen

Research Collection School Of Computing and Information Systems

We investigate whether additional photos beyond a single headshot makes a persona profile more informative without confusing the end user. We conduct an eye-tracking experiment and qualitative interviews with digital content creators after varying the persona in photos via a single headshot, a headshot and photo of the persona in different contexts, and a headshot with photos of different people with key persona attributes the gender and age. Findings show that contextual photos provide significantly more persona information to end users; however, showing photos of multiple people engenders confusion and lowers informativeness. Also, as anticipated, viewing additional photos requires more …

Go to article

Twenty Years Of Building Simulation Trends: Text Mining And Topic Modeling Of The Bldg-Sim Email List Archive, Clayton Miller, Matias Quintana, Jason Glazer Sep 2019

Twenty Years Of Building Simulation Trends: Text Mining And Topic Modeling Of The Bldg-Sim Email List Archive, Clayton Miller, Matias Quintana, Jason Glazer

Research Collection College of Integrative Studies

The recent growth of the building performance research community has been in parallel with the onebuilding.org Bldg-sim email list. This list was formed in 1999 and steadily grew into a major venue for building simulation community announcements, discussions, and questions and answers (Q&A). This paper presents an analysis of the Bldg-sim email archive to determine how traffic has grown over the years and what general trends have come and gone in this particular user community. We use a text mining approach to find the most prominent topics over the years and create trend metrics from the frequency of the most …

Go to article

Ion Software-Defined Radio Metadata Standard Final Report, Sanjeev Gunawardena, Alexander Rugamer, Muhammad Subhan Hameed, Markel Arizabaleta, Thomas Pany, Javier Arribas Sep 2019

Ion Software-Defined Radio Metadata Standard Final Report, Sanjeev Gunawardena, Alexander Rugamer, Muhammad Subhan Hameed, Markel Arizabaleta, Thomas Pany, Javier Arribas

Faculty Publications

The ION GNSS SDR Metadata Standard describes the formatting and other essential PNT-related parameters of sampled data streams and files. This allows processors to seamlessly consume such data without the need to input these parameters manually. The technical development phase of the initial version of the standard has now been deemed complete and is currently undergoing the last remaining procedural steps towards adoption as a formal standard by the Institute of Navigation. This paper reports on the activities of the working group since September 2018 and summarizes the final products of the standard. It also reports on examples of early …

Go to article

Quantitative Analysis Of Cerium-Gallium Alloys Using A Hand-Held Laser Induced Breakdown Spectroscopy Device, Ashwin P. Rao, Matthew Cook, Howard L. Hall, Michael B. Shattan Sep 2019

Quantitative Analysis Of Cerium-Gallium Alloys Using A Hand-Held Laser Induced Breakdown Spectroscopy Device, Ashwin P. Rao, Matthew Cook, Howard L. Hall, Michael B. Shattan

Faculty Publications

A hand-held laser-induced breakdown spectroscopy device was used to acquire spectral emission data from laser-induced plasmas created on the surface of cerium-gallium alloy samples with Ga concentrations ranging from 0–3 weight percent. Ionic and neutral emission lines of the two constituent elements were then extracted and used to generate calibration curves relating the emission line intensity ratios to the gallium concentration of the alloy. The Ga I 287.4-nm emission line was determined to be superior for the purposes of Ga detection and concentration determination. A limit of detection below 0.25%was achieved using a multivariate regression model of the Ga I …

Go to article

Mechanical And Temperature Resilience Of Multi-Material Systems For Printed Electronics Packaging, Clayton Neff, Justin Nussbaum, Chris Gardiner, Nathan B. Crane, James L. Zunino, Mike Newton Sep 2019

Mechanical And Temperature Resilience Of Multi-Material Systems For Printed Electronics Packaging, Clayton Neff, Justin Nussbaum, Chris Gardiner, Nathan B. Crane, James L. Zunino, Mike Newton

Faculty Publications

In this work, two AM technologies were utilized to compare the effectiveness of fabricating a simple electronic device with a conductive trace and hollow cylinder representative of ‘printed packaging’ that would survive harsh environmental conditions. The printed packaging cylinder delineates printed potting for electronics packaging. An nScrypt direct write (DW) system was the primary manufacturing system but a developing technology—coined large area projection sintering (LAPS)—manufactured a subset of samples for comparison. The tests follow Military Standard (MIL STD) 883K and include resiliency evaluation for die shear strength, temperature cycling, thermal shock, and high G loading by mechanical shock. Results indicate …

Go to article

First Prev Next Last