Engineering Commons^™

Bioinspired Materials For Water Collection, Water Purification And Oil-Water Separation, Bharat Bhushan

Nature-Inspired Engineering

Access to a safe supply of water is a human right. However, with growing populations, global warming, and contamination due to human activity, it is one that is increasingly under threat. It is hoped that nature can inspire the creation of materials to aid in the supply and management of water, from water collection and purification to water source clean up and rehabilitation from oil contamination.

Many living species thrive in even the driest places, with some surviving on water harvested from fog^1,2,3. Due to temperatures lower than dew point in the deserts at night, water condensation also …

Delivering Energy Savings For The Supply Chain Through Building Information Modelling As A Result Of The Horizon 2020 Energy Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The global buildings sector is now responsible for 40% of final energy consumption as well as accounting for 33% of energy-related carbon dioxide emissions. This has resulted in a growing urgency to address energy and emissions from buildings and construction, to meet restrictive 2020 targets as specified by the European Union (EU). To achieve these targets a number of funding initiatives have been put in place through Horizon 2020 with a focus on BIM, due to it having the potential to rapidly produce energy outputs that enable design teams to analyse and compare the most cost-effective, energy-efficient options. However, despite …

Usu Tops List For Nuclear Engineering Research | College Of Engineering, Utah State University

College of Engineering News

USU is once again being recognized as a national leader in nuclear engineering research.

Preparation Of Activated Biochar-Supported Magnetite Composite For Adsorption Of Polychlorinated Phenols From Aqueous Solutions, Byung-Moon Jun, Yejin Kim, Jonghun Han, Yeomin Yoon, Chang Min Park

Faculty Publications

For this study, we applied activated biochar (AB) and its composition with magnetite (AB-Fe₃O₄) as adsorbents for the removal of polychlorophenols in model wastewater. We comprehensively characterized these adsorbents and performed adsorption tests under several experimental parameters. Using FTIR, we confirmed successful synthesis of AB-Fe₃O₄ composite through cetrimonium bromide surfactant. We conducted adsorption tests using AB and AB-Fe₃O₄ to treat model wastewater containing polychlorophenols, such as 2,3,4,6-Tetrachlorophenol (TeCP), 2,4,6-Trichlorophenol (TCP), and 2,4-Dichlorophenol (DCP). Results of the isotherm and the kinetic experiments were well adapted to Freundlich’s isotherm model and the …

"Collaborative Research: Elements: Advancing Data Science And Analytics For Water (Dsaw)", Jeffery S. Horsburgh

Funded Research Records

No abstract provided.

Tracking Center Of Mass With Limited Inertial Measurement Units, Connor Nathaniel Morrow

Dissertations and Theses

Wearable motion tracking systems pose an opportunity to study and correct human balance and posture during movement. Currently, these observations are either being conducted in laboratories with the use of camera systems and markers placed on the body, or through the use of suits containing large numbers (15-20) of inertial measurement units. However, to aid with rehabilitation of individuals with impaired balance, there needs to be an option to collect these observations outside of clinics and without incurring much cost from the user. I have focused on three inertial measurement units, one placed on each shank and one placed on …

Learning From Incidents To Reduce The Risk Of Drowning In Swimming Pools: Implementation Of Experience-Based Feedback Regarding Near-Misses In Four Public Facilities In France, Élie Vignac, Pascal Lebihain, Bastien Soulé

International Journal of Aquatic Research and Education

The prevention of sports accidents must rely on a detailed knowledge of accident circumstances and risk factors. Today, very few studies have investigated in depth non-fatal drowning incidents that have occurred in public swimming pools (PSP). Learning from incidents seems likely to advance the knowledge of accident scenarios. This research study aimed to capture minor incidents that might identify safety lessons and preventive measures. Incidents of minor and major aquatic events were collected from four PSPs that had hosted 700,000 bathers per year. About 800 incidents and 300 aquatic rescues performed by lifeguards were recorded within a time frame of …

Multi-Agent Control System And Method, Piyush Grover, Karthik Elamvazhuthi

Department of Mechanical and Materials Engineering: Faculty Publications

Motion of multiple agents with identical non - linear dynamics is controlled to change density of the agents from the initial to the final density . A first control problem is formulated for optimizing a control cost of changing density of the agents from the initial density to the final density subject to dynamics of the agents in a density space . The first control problem , which is a non - linear non - convex problem over a multi - agent control and a density of the agents , is trans formed into a second control problem over the …

Concrete Bridge Deck Performance Data And Metrics For The State Of Oregon, Jael Wettach-Glosser

Dissertations and Theses

Bridge decks are a critical element of a bridge that support and distribute vehicle loads to the superstructure. Because of the requirements of this role, bridge decks are exposed to severe conditions that typically lead to structural deficiency in bridges which is both costly and disruptive. Therefore, to keep bridges and highways in good repair, developing optimal preservation decisions for concrete bridge decks is key. In order to develop effective performance monitoring and preservation schedules, the parameters affecting bridge deck deterioration need to be better understood.

With guidance from the literature and Oregon Department of Transportation (ODOT) personnel, two datasets …

Integrating Humanities Into Environmental Engineering Classrooms, Sarah Bauer

Open Educational Resources

In this module, students will be exposed to the broader context of several major components within the area of environmental engineering by integrating humanities into the environmental engineering classroom. This module includes lecture content pertaining to the areas of (1) solid and hazardous waste management and (2) management of air pollution. This module will help provide students with a background of these subject areas by: introducing students to the history of waste management practices and regulations in the United States and exposing students to various major air pollution episodes throughout history and the implications air pollution has on human and …

Problems, Solutions, And Opportunities For Engineers And Scientists, Mary K. Barillas, Stephen P. Fernandez

Open Educational Resources

In this module, students spend time reflecting on major problems facing society today (ex: poverty, hunger, health, education, clean water/sanitation, etc). They then compare their findings to the major societal challenges identified by the United Nations through the UN Sustainable Development Goals, the National Academy of Engineering - if the class is an engineering class - or the National Academy of Sciences - if the class is a science class. Finally, the students reflect on the major career paths for students graduating with engineering/science degrees and then, more specifically, for students graduates from their college and/or university (Rowan University College …

Modelling The Addition Of Limestone In Cement Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer

Conference papers

Hydration models can aid in the prediction, understanding and description of hydration behaviour over time as the move towards more sustainable cements continues.

HYDCEM is a new model to predict the phase assemblage, degree of hydration and heat release over time for cements undergoing hydration for any w/c ratio and curing temperatures up to 450C. HYDCEM, written in MATLAB, complements more sophisticated thermodynamic models by predicting these properties over time using user-friendly inputs within one code. A number of functions and methods based on up to date cement hydration behaviour from the literature are hard-wired into the code along with …

Structure-Property Relations Of Highly Ordered Bio-Nanocomposites, Suellen Pereira Espindola, Ben Norder, Jure Zlopasa, Stephen J. Picken

Nature-Inspired Engineering

Bio-nanocomposites with superior mechanical, transport and flame-retardant properties can be produced from the combination of biopolymers and silicate nanoclay platelets, such as montmorillonite (MMT) [1,2,4]. The highly ordered nanostructure observed in such systems is often compared to natural ones, such as in the brick-and-mortar arrangement of aragonite plates in nacreous materials [3]. Previous work on nacre-mimetic alginate/MMT nanocomposites has shown good compatibility between the biopolymer and inorganic filler and a dependence on MMT concentration to the level of alignment [4]. In this study, we investigate the effect of gelation on the orientation of nanoparticles and its impact on clay stacking …

Development Of A Plc-Based Control Systems Trainer Using Open Source Hmi Simulation Software, Nathaniel Bryce Blevins

Student Theses and Dissertations

The integration of an open-source HMI program, AdvancedHMI, into a PLC control systems trainer is discussed in detail. This document assists the reader in understanding the steps required to connect controllers with AdvancedHMI and construct simulated projects. This document is intended to serve as an instructional guide to students, faculty and users. This document outlines and discusses in detail the many tools contained within AdvancedHMI that are necessary to construct simulations for projects. How each tool interacts and is connected to the controller is discussed in detail, including each tools’ applicability to general applications. This document serves as a guide …

The Flight Risk Perception Scale (Frps): A Modified Risk Perception Scale For Measuring Risk Of Pilots In Aviation, Scott R. Winter, Dothag Truong, Joseph R. Keebler

Publications

Risk and risk perception remain focal areas of research within the aviation domain. The purpose of the current study was to assess an existing measure of a 26-item self-risk perception scale for pilots. A sample of 490 participants was used in the present study, and a confirmatory factor analysis was conducted on the original 26-item instrument. The findings indicated that there was a poor model fit of the original instrument. Through the use of modification indices, a new 13-item scale was produced, which resulted in a second-order CFA model. Flight risk was shown to be the second-order construct with general …

A Nature-Inspired Passive Airflow System For Carbon Capture And Sequestration, James Niffenegger, Michael Aziz

Nature-Inspired Engineering

Increasing levels of carbon dioxide (CO₂) emissions continue to threaten communities and biodiversity worldwide. Carbon capture and sequestration (CCS), where CO₂ is removed from the air and stored so it cannot return to the atmosphere, has the potential to reduce these impacts. However, CCS systems are unpopular due to their high energetic and financial costs [1]. To-date, few systems exist that can effectively remove CO₂ from ambient air and the majority are designed solely to remove CO₂ from flue gas produced by power plants. Although half of global emissions can be captured from flue gas, …

Conference Program, Marc-Olivier Coppens, Bharat Bhushan

Nature-Inspired Engineering

No abstract provided.

Trade-Offs In Computer-Aided Biomimetics, Ruben Kruiper, Julian J.F.V. Vincent, Jessica Chen-Burger, Ioannis Konstas, Rupert C. Soar, Marc P.Y. Desmulliez

Nature-Inspired Engineering

Biomimetics, the application of mechanisms observed in nature to inform technical solutions, is inherently cross-disciplinary. For the most part, however, practitioners are only expert in one domain, e.g., engineering. Being a layman in the other domain, biology, can make it hard and time-consuming to find and understand relevant information. Computer-Aided Biomimetics (CAB) involves the development of computational tools to overcome this domain-expertise mismatch.

Finding a bridge between engineering and biology has been challenging. Although a plethora of methodological approaches have been proposed to bridge the engineering and biology domains, Biomimetics remains adventitious and research intensive. We give an overview of …

Facile Synthesis Of Reduced Graphene Oxide-Supported Pd/Cuo Nano-Particles As An Efficient Catalyst For Cross-Coupling Reactions, Hany A. Elazab Dr

Chemical Engineering

The present communication reports a scientific investigation of a simple and versatile synthetic route for the synthesis of palladium nanoparticles decorated with copper oxide and supported on reduced graphene oxide (rGO). They are used as a highly active catalyst of Suzuki, Heck, and Sonogashira cross coupling reactions with a remarkable turnover number of 7000 and a turnover frequency of 85000 h-1. The Pd-CuO nanoparticles supported on reduced graphene oxide nanosheets (Pd-CuO/rGO) exhibit an outstanding performance through a high catalytic activity towards cross coupling reactions. A simple, reproducible, and reliable method is used to prepare this efficient catalyst using microwave irradiation …

Winslamm Simulation Of Hydrologic Performance Of Permeable Pavements—A Case Study In The Semi-Arid Lower Rio Grande Valley Of South Texas, United States, Taufiqul Alam, Ahmed Mahmoud, Kim D. Jones, Juan Cesar Bezares-Cruz, Javier Guerrero

Civil Engineering Faculty Publications

his study used the Source Loading and Management Model for Windows (WinSLAMM) to develop a set of calibrated hydrologic models for three types of regional permeable pavements—porous concrete pavement (PCP), permeable interlocking concrete pavement (PICP), and interlocking block pavement with gravel (IBPG). The objective was to assess the hydrologic performance of permeable pavements, including the runoff depth, peak discharge, percentage increment in runoff reduction of pavements as a function of rainfall depth, development area, and base aggregate porosity, respectively. The permeable pavements were monitored over a wide range of rainfall events in the semi-arid Lower Rio Grande Valley of South …

Elementary Teachers’ Positive And Practical Risk-Taking When Teaching Science Through Engineering Design, Jeffrey Radloff, Brenda Capobianco, Annie Dooley

Journal of Pre-College Engineering Education Research (J-PEER)

This study examines the perspectives of three generations of elementary teachers learning to teach science using engineering design and the risks associated with implementing this innovative type of reform-based science instruction. Data were gathered using semi-structured interviews, classroom observations, and teacher reflections. Data analysis entailed open coding and document analysis. The findings indicated that there were four types of perceived risks: practical, pedagogical, conceptual, and personal. First-generation teachers exhibited conceptual risk-taking behavior, while second- and third-generation teachers reported practical, pedagogical, and personal risks. Benefits of risk-taking included increased student engagement in science, improved self-confidence in teaching science, and greater teacher …

Characterization Of The 2-Phase Turning Response Of Madagascar Hissing Cockroach Biobots To Antennal Stimulation, Stefanie Jane Panzenhagen

Graduate Theses - Biology & Biomedical Engineering

Biobots are living insects that are controlled via neurostimulation applied through implanted electrodes and have a variety of potential applications such as search and rescue operations. Madagascar Hissing Cockroaches (MHCs) are commonly used as biobots; however, their use remains under investigation due to lack of a comprehensive motion profile in response to neurostimulation, which makes consistent control a challenge. MHC biobots often exhibit a 2-phase turning response to antennal stimulation, with an initial turn (primary) in the desired direction followed by a “corrective” turn (secondary) in the undesired direction. The purpose of this research is to characterize the 2-phase turning …

3d Printing Of Silk Fibroin-Based Hybrid Scaffold Treated With Platelet Rich Plasma For Bone Tissue Engineering, Liang Wei, Shaohua Wu, Mitchell Kuss, Xiping Jiang, Runjun Sun, Reid Patrick, Xiaohong Qin, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

3D printing/bioprinting are promising techniques to fabricate scaffolds with well controlled and patient-specific structures and architectures for bone tissue engineering. In this study, we developed a composite bioink consisting of silk fibroin (SF), gelatin (GEL), hyaluronic acid (HA), and tricalcium phosphate (TCP) and 3D bioprinted the silk fibroin-based hybrid scaffolds. The 3D bioprinted scaffolds with dual crosslinking were further treated with human platelet-rich plasma (PRP) to generate PRP coated scaffolds. Live/Dead and MTT assays demonstrated that PRP treatment could obviously promote the cell growth and proliferation of human adipose derived mesenchymal stem cells (HADMSC). In addition, the treatment of PRP …

Effect Of Rice Husk Ash (Rha) On The Durability Of Regular And Flowable Concrete, Kazi Tamzidul Islam

Student Theses and Dissertations

Rice Husk Ash (RHA) has been considered as an agricultural waste material, but its pozzolanic characteristics and chemical compositions have increased its potential to be a supplementary cementitious material. This study presents findings from a combination of laboratory and field experimental plan executed on RHA-modified regular and flowable fill concrete (FFC) mixtures. With the investigation of different laboratory experiments involving mechanical properties and durability, coarse RHA particle was not found to be suitable for regular concrete. On the other hand, test results of FFC mixtures made using coarse RHA particles proved them to be viable construction materials. Furthermore, a field …

3d Printing Of Silk Fibroin-Based Hybrid Scaffold Treated With Platelet Rich Plasma For Bone Tissue Engineering, Liang Wei, Shaohua Wu, Mitchell Kuss, Xiping Jiang, Runjun Sun, Reid Patrick, Xiaohong Qin, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

3D printing/bioprinting are promising techniques to fabricate scaffolds with well controlled and patient-specific structures and architectures for bone tissue engineering. In this study, we developed a composite bioink consisting of silk fibroin (SF), gelatin (GEL), hyaluronic acid (HA), and tricalcium phosphate (TCP) and 3D bioprinted the silk fibroin-based hybrid scaffolds. The 3D bioprinted scaffolds with dual crosslinking were further treated with human platelet-rich plasma (PRP) to generate PRP coated scaffolds. Live/Dead and MTT assays demonstrated that PRP treatment could obviously promote the cell growth and proliferation of human adipose derived mesenchymal stem cells (HADMSC). In addition, the treatment of PRP …

Milk Oligopeptide Inhibition Of (Α)-Tocopherol Fortified Linoleic Acid Oxidation, Haina Yuan, Jinyan Gong, Kun Tang, Jinge Huang, Gongnian Xiao, Jianmin Lv

Biological Engineering Student Research

This study investigated the effect of milk oligopeptides and (α)-tocopherol on inhibition of linoleic acid oxidation using Fe²⁺-vitamin C induced linoleic acid oxidation model through analysis of malondialdehyde, peroxide value, and conjugated diene and triene in the model. The alteration of milk oligopeptides maximal absorption wavelength, fluorescent feature, and secondary structure were further investigated to elucidate the interactions between milk oligopeptide and (α)-tocopherol that altered the inhibitory effect of linoleic acid oxidation. Results showed that Pro-Tyr-Tyr-Ala-Lys (PYYAK) and Ile-Pro-Ile-Gln-Tyr (IPIQY) with (α)-tocopherol significantly inhibited the oxidation of linoleic acid and reduced the formation of malondialdehyde by 38% and …

Peptide Nanotube Encapsulated Enzyme Biosensor For Vapor Phase Detection Of Malathion, An Organophosphorus Compound, Christopher W. Edwards, Surachet Duanghathaipornsuk, Mark N. Goltz, Sushil Kanel, Dong-Shik Kim

Faculty Publications

This study explores the use of a butyrylcholinesterase (BChE)-based, reversible reaction biosensor using screen-printed electrodes (SPEs) having a smaller working surface area than the single-use electrodes previously studied. Previous research demonstrated the prospective application of a single-use biosensor fabricated with an acetylcholinesterase (AChE) enzyme encapsulated in peptide nanotubes (PNTs) and enhanced with horseradish peroxidase (HRP) to detect organophosphorus compounds (OPCs) in aqueous and gas phases. In the current study, potential improvements to the biosensor are investigated. BChE-based biosensors were fabricated using PNTs, HRP, and Nafion in combination to increase the reactive surface area, enhance sensitivity, and maintain enzyme stability. Cyclic …

Using Bluetooth Low Energy Devices To Monitor Visitor Activity In Remote Amenity Spaces, Ahlam Al Anbouri, David Powell, Damon Berry, John Mcgrory, Niall Holmes, Lorraine D'Arcy

Conference Papers

Tracking of pedestrian behaviour, particularly route selection and temporal behaviours, can be difficult to undertake. This is especially true of studies at a community or campus level where the anonymity of pedestrians can be difficult to protect. The introduction of the EU’s General Data Protection Regulations 2016 (GDPR) has increased the complexity of this challenge. Advances in Bluetooth Low Energy (BLE) technology in recent years have increased the potential to monitor human behaviour by tracking and triangulating pedestrians. This paper describes an experiment undertaken along The Great South Wall at the Port of Dublin, which is considered a leading amenity …

Spatial Positioning And Operating Parameters Of A Rotary Bell Sprayer: 3d Mapping Of Droplet Size Distributions, Adnan Darwish Ahmad, Binit B. Singh, Mark Doerre, Ahmad M. Abubaker, Masoud Arabghahestani, Ahmad A. Salaimeh, Nelson K. Akafuah

Institute of Research for Technology Development Faculty Publications

In this study, we evaluated the fundamental physical behavior during droplet formation and flow from a rotary bell spray in the absence of an electrostatic field. The impact of a wide range of operating parameters of the rotary bell sprayer, such as flow rates, rotational speeds, and spatial positioning, on droplet sizes and size distributions using a three-dimensional (3-D) mapping was studied. The results showed that increasing the rotational speed caused the Sauter mean diameter of the droplets to decrease while increasing flow rate increased the droplet sizes. The rotational speed effect, however, was dominant compared to the effect of …

Why Reinventing The Wheels? An Empirical Study On Library Reuse And Re-Implementation, Bowen Xu, Le An, Ferdian Thung, Foutse Khomh, David Lo

Research Collection School Of Computing and Information Systems

Nowadays, with the rapid growth of open source software (OSS), library reuse becomes more and more popular since a large amount of third- party libraries are available to download and reuse. A deeper understanding on why developers reuse a library (i.e., replacing self-implemented code with an external library) or re-implement a library (i.e., replacing an imported external library with self-implemented code) could help researchers better understand the factors that developers are concerned with when reusing code. This understanding can then be used to improve existing libraries and API recommendation tools for researchers and practitioners by using the developers concerns identified …