Engineering Commons^™

Improving Paper-Based Microfluidic Mixing With The Incorporation Of Flow Disrupting Structures, Hannah C. Green

Master's Theses

Paper-based microfluidic devices provide a light-weight, cost effective platform for diagnostic and analytical testing. The goal of this project is to enhance paper-based microfluidic mixing by incorporating fluid flow disrupting structures (referred to here as rib bones) into the microdevice design to expand the analytical capabilities of paperbased microfluidic devices. The devices are fabricated on Whatman CHR-1 chromatography paper. The devices are designed in SolidWorks and printed using a solid ink printer (ColorQube 8580). The wax is penetrated into the paper to create hydrophobic barrier regions by heating in a convection oven until the wax is fully penetrated. The parameters …

Application Of Halloysite Nanotubes In Bone Disease Remediation And Bone Regeneration, Yangyang Luo

Doctoral Dissertations

Customized patient therapy has been a major research focus in recent years. There are two research fields that have made a significant contribution to realizing individualized-based treatment: targeted drug delivery and three-dimensional (3D) printing technology. With benefit from the advances in nanotechnology and biomaterial science, various drug delivery systems have been established to provide precise control of therapeutic agents release in time and space. The emergence of three-dimensional (3D) printing technology enables the fabrication of complicated structures that effectively mimic native tissues and makes it possible to print patient-specific implants. My dissertation research used a clay nanoparticle, halloysite, to develop …

Feature Space Modeling For Accurate And Efficient Learning From Non-Stationary Data, Ayesha Akter

Doctoral Dissertations

A non-stationary dataset is one whose statistical properties such as the mean, variance, correlation, probability distribution, etc. change over a specific interval of time. On the contrary, a stationary dataset is one whose statistical properties remain constant over time. Apart from the volatile statistical properties, non-stationary data poses other challenges such as time and memory management due to the limitation of computational resources mostly caused by the recent advancements in data collection technologies which generate a variety of data at an alarming pace and volume. Additionally, when the collected data is complex, managing data complexity, emerging from its dimensionality and …

Electrolytic Metallization Of Halloysite Nanotubes And Antimicrobial Applications, Ahmed Humayun

Doctoral Dissertations

Due to increased reports of infections and biofouling arising from the use of invasive medical devices, novel antimicrobial agents with suitable anti-biofouling properties are critically needed. Transition metals exhibit substantial antimicrobial activity; however, their use is limited because of their inherent toxicity to eukaryotic cells. In this regard, naturally occurring halloysite clay nanotubes (HNTs) show significant promise. HNTs possess a high surface area for adsorption while its hollow lumen can be used for loading different materials.

Herein, we demonstrate an electrolytic method for generating and depositing metal nanoparticles (NPs) on the HNTs outer surface and we propose an optimized method …

Perceptions Of Higher Education In Nonmetropolitan Nebraska: Research Report 19‐4, Rebecca Vogt, Cheryl A. Burkhart-Kriesel, Randolph L. Cantrell, Bradley Lubben, L. J. Mcelravy, Timothy Meyer, Jason L. Weigle

Rural Futures Institute: Publications

Some recent national polls have shown a decline in confidence in higher education. The cited reasons for this decline are concerns about affordability, access and the political culture on campuses. Given these national trends, how do rural Nebraskans view the impacts of their education? Do they view higher education as important for individuals and the economy? Have these views changed over the past four years? What types of higher education institutions have their households attended? This paper provides a detailed analysis of these questions. This report details 1,776 responses to the 2019 Nebraska Rural Poll, the 24th annual effort to …

Incorporating Travel Time Reliability In Predicting The Likelihood Of Severe Crashes On Arterial Highways Using Non-Parametric Random-Effect Regression, Emmanuel Kidando, Ren Moses, Eren Erman Ozguven, Thobias Sando

Civil and Environmental Engineering Faculty Publications

© 2019 The Authors Travel time reliability (TTR) modeling has gain attention among researchers' due to its ability to represent road user satisfaction as well as providing a predictability of a trip travel time. Despite this significant effort, its impact on the severity of a crash is not well explored. This study analyzes the effect of TTR and other variables on the probability of the crash severity occurring on arterial roads. To address the unobserved heterogeneity problem, two random-effect regressions were applied; the Dirichlet random-effect (DRE) and the traditional random-effect (TRE) logistic regression. The difference between the two models is …

Teaching Wind Energy To Engineering And Education Undergraduates Through Community Engagement, Maija A. Benitz, Li-Ling Yang

Engineering, Computing & Construction Management Faculty Publications

Rhode Island's adoption of the Next Generation Science Standards in 2013 [1] established a pressing need to provide elementary schools with support for integrating engineering in our local district's classrooms. Wind energy was identified as an appropriate instructional topic, both for its relevance to Rhode Island [2], and for its strength as a tool for studying the engineering design process. Education and engineering undergraduates collaborated to educate local fourth graders about engineering design and wind energy. While supporting the need for engineering education in the community, this project also deepened learning for both education and engineering students at Roger Williams …

From Experimental Studies To Coarse-Grained Modeling: Characterization Of Surface Area To Volume Ratio Effects On The Swelling Of Poly (Ethylene Glycol) Dimethacrylate Hydrogels, Gabriel Zahm

Master's Theses

Understanding the performance of widely applied nanoscale hydrogel biomaterials is an unmet need within the biomedical field. The objective of this master’s thesis project was to evaluate the effects size and surface area has on the in vivo behavior of nanoscale hydrogels. The hypothesis tested was that at the nanoscale, the increased surface area to volume effects of nanoscale hydrogels play and important role in the overall swelling of hydrogels, such that nanoscale hydrogels swell to a greater degree than their bulk counterparts. To investigate this, the bulk swelling behavior of a series of neutral poly (ethylene glycol) di-methacrylate (PEGDMA) …

Vu Villa Structural Design And Rehabilitation, Kolby Sukut

Graduate Theses & Non-Theses

The Vu Villa is a bar and pizzeria which has operated out of the first floor of the Campana building in Butte, Montana since 1967. Construction of the Campana building started in 1894 and was completed before the end of the 19^th century. The Campana building is a two-story building which primarily consists of exterior brick masonry walls and wood framing on the interior. Within the last several decades significant sag has been identified in the second-floor of the building as well as an adjacent staircase. In addition, renovation activities have been discussed for the upstairs which would involve …

Microstuctural Analysis Of Additively Manufactured 308l Stainless Steel Produced By Plasma Arc Welding, Ryan Foley

Graduate Theses & Non-Theses

Additive Manufacturing (AM) is a technique to produce special products by depositing layers of material in a specific pattern. Wire and arc additive manufacturing (WAAM) is an AM technique that uses welding equipment that has been modified and automated to deposit layers of welding wire. Characterization of specimens produced by WAAM method is required to optimize the process parameters. This research focuses on the microstructure characterization of 308L stainless steel samples produced by a novel WAAM technique known as Plasma Arc Weld Print 3D (PP3D). PP3D consists of multiple plasma arc torches that can deposit material in two modes of …

Recovery Of Rare Earth Elements By Advanced Processing Technologies, Prince Sarfo

Graduate Theses & Non-Theses

Rare earth elements (REEs) are strategic materials of extreme importance to both military and civil applications. REEs are mined and processed because of their criticality. End of life rare earth metals are recycled for efficient use of natural resources and also to ensure supply of these critical raw materials. By using hydro- or pyro-metallurgi­cal approaches, REEs can be processed from mined ore or recycled from magnets and other materials as rare earth oxides, fluorides and chlorides. Typically, rare earth oxides are dissolved in a molten halide bath, converted to metal by electrolysis at elevated temperatures, and then recovered as a …

An Investigation Into The Mechanisms Of Liquid Loading In Small-Diameter Vertical Pipes, Matt Malin

Graduate Theses & Non-Theses

Most gas wells produce either condensed water or liquid hydrocarbons, which over time build up in the wellbore and eventually kill the well – a phenomenon called “liquid loading”. Industry operators have used a criterion based on Stoke’s Law (the Turner criterion) for predicting when liquid loading will begin to occur. However, this approach does not account for multiphase flow effects in the wellbore, causing the Turner criterion to give inconsistent results when applied in the field. This research proposes a 4-stage flow behavior model for gas-dominant flow based on flow morphology changes observed during two experiments conducted in 2.0-inch …

Investigation Of Surface Treatment And Density Separation For Selective Recycling Of Plastics, Adilbek Baigabelov

Graduate Theses & Non-Theses

Froth flotation has been a useful method for flotation separation of plastics. Teeter bed concentration may also be potentially employed to accomplish gravity-based separation of plastics from a mixture. This work investigates selective separation of six different types of plastics using a novel method by combining advanced gravity concentration and froth flotation techniques. Surface active reagents were used during flotation studies for modification of surface properties of certain plastics in order to enhance selectivity. Elutriation technology in a teeter bed separator was successfully employed to achieve gravity-based concentration of certain plastics. The novel flowsheet was shown to recover plastics of …

Systematic Comparison Of Two Axial Flux Pm Machine Topologies: Yokeless And Segmented Armature Versus Single Sided, Narges Taran, Greg Heins, Vandana Rallabandi, Dean Patterson, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper systematically compares two axial flux permanent magnet (AFPM) machines designed for a university student racing car application: a double-rotor single-stator yokeless and segmented armature (YASA) structure, and a single- stator single-rotor configuration. Both machines are optimized for minimum loss and active weight using 3D finite element analysis and the highest performing candidate designs are compared in more detail. The studies indicate that the benefits offered by the YASA configuration over the single-stator single-rotor machine are achieved only for specific designs that are heavier. For the design space with lower mass, albeit with increased losses, the Pareto front designs …

A Comparative Study Of Recommendation Systems, Ashwini Lokesh

Masters Theses & Specialist Projects

Recommendation Systems or Recommender Systems have become widely popular due to surge of information at present time and consumer centric environment. Researchers have looked into a wide range of recommendation systems leveraging a wide range of algorithms. This study investigates three popular recommendation systems in existence, Collaborative Filtering, Content-Based Filtering, and Hybrid recommendation system. The famous MovieLens dataset was utilized for the purpose of this study. The evaluation looked into both quantitative and qualitative aspects of the recommendation systems. We found that from both the perspectives, the hybrid recommendation system performs comparatively better than standalone Collaborative Filtering or Content-Based Filtering …

Prodhimi I Çimentos, Donika Musliu

Theses and Dissertations

Ky studim përfshin prodhimin e çimentos. Qëllimi i këtij punimi është që të zgjerojm njohurit e përgjithshme mbi teknologjin e prodhimit të çimentos. Cimento eshte pluhur i thate i cili formohet me kombinimin e materialeve te ndryshme , si guri gelqerore, argjila, shkumesi, oksidet e ndryshme etj. Cimentoja eshte nje material ndertimi shum i rendesishme.Hapi i pare ne prodhimin e cimentos eshte te kombinoje nje shumellojshmeri perberesish te paperpunuar ne menyre qe cimentoja qe rezulton te kete perberjen e deshiruar kimike. Këtu përshkruhet në mënyrë të detajuar proceset kryesore siç janë: Procesi i thatë dhe i lagësht i lëndës së …

Shqyrtimet Nga Materialet E Ndërtimit Ne Laboratorin E Qendrës Se Kompetencës-Skenderaj, Gëzim Bajraktari

Theses and Dissertations

Shqyrtimet e materialeve ndërtimore për caktimin e cilësisë se tyre kërkon një përkushtim dhe një punë te madhe, ne ketë teme do te fokusohemi ne shqyrtimin e materialeve ndërtimore me fokus te veçantë materialeve për përfitimin e betonit, shqyrtime këto qe realizohen ne laboratorin e Qendrës se Kompetencës në Skenderaj. Materialet konkrete qe do te jene ne fokus janë kryesisht materialet apo komponentët përbërëse te betonit, siç janë agregati, çimentoja dhe uji. Llojet e agregatit mënyrat e përfitimit dhe vetitë e agregateve, mënyrat e ekzaminimit te tije. Caktimi i fraksioneve te agregatit dhe rëndësia e fraksionizmit, mënyrat e fraksionizmit dhe …

Rregullimi I Parkingut Për Mjetet Më Bashkëkohore Për Parkim Te Kategorisë “B”, Teuta Ukoshata

Theses and Dissertations

No abstract provided.

A Multicarrier Technique For Monte Carlo Simulation Of Electrothermal Transport In Nanoelectronics, Tyler J. Spence

Doctoral Dissertations

The field of microelectronics plays an important role in many areas of engineering and science, being ubiquitous in aerospace, industrial manufacturing, biotechnology, and many other fields. Today, many micro- and nanoscale electronic devices are integrated into one package. e capacity to simulate new devices accurately is critical to the engineering design process, as device engineers use simulations to predict performance characteristics and identify potential issues before fabrication. A problem of particular interest is the simulation of devices which exhibit exotic behaviors due to non-equilibrium thermodynamics and thermal effects such as self-heating. Frequently, it is desirable to predict the level of …

Synthesis And Secretome Release By Human Bone Marrow Mesenchymal Stem Cell Spheroids Within Three-Dimensional Collagen Hydrogels: Integrating Experiments And Modelling, Jyotsna Joshi, Mohammadreza Dehghan Abnavi, Chandrasekhar R. Kothapalli

Chemical & Biomedical Engineering Faculty Publications

Myocardial infarction results in loss of cardiac cell types, inflammation, extracellular matrix (ECM) degradation, and fibrotic scar. Transplantation of bone marrow-derived mesenchymal stem cells (BM-MSCs) is being explored as they could differentiate into cardiomyocyte-like cells, integrate into host tissue, and enhance resident cell activity. The ability of these cells to restore lost ECM, remodel the inflammatory scar tissue, and repair the injured myocardium remains unexplored. We here elucidated the synthesis and deposition of ECM (e.g., elastin, sulfated glycosaminoglycans, hyaluronan, collagen type III, laminin, fibrillin, lysyl oxidase, and nitric oxide synthases), matrix metalloproteinases (MMPs) and their inhibitors (TIMPs), and other secretome …

Strategic Implications For The United States Of The Belt And Road Initiative In Africa, Alec Monnie

Independent Study Project (ISP) Collection

The belt and road initiative is one of the most significant developments of the twenty-first century, which the United States will need to learn to adapt to. Much of the academic literature regarding the belt and road initiative mentions that Africa is a significant participant in this policy development, but fail to elaborate as to why that is, or what the implications for this are for the United States. This article expands upon the strategic significance of the African continent, and explains the implications thereof for the United States and China. This article argues that the belt and road initiative …

Mining’S Impact On Environmental And Human Health: A Case Study Of Ramba County’S Gold Mine, Vivika Fernes

Independent Study Project (ISP) Collection

This research project aims to gain a greater understanding of the health implications that Ramba County’s goldmine has on miners, their families, and the environment. While this study observes the community-at-large, inclusive of visiting miners and extended family members of workers, it will focus on women who engage in artisanal and small-scale gold mining (ASGM). Millions of people in the developing word depend on ASGM for their livelihood, evident in this case study in Ramba County. However, while gold is associated with wealth, there is great irony in the fact that those working within the mining industry are being exploited …

Privacidad Digital En Ecuador: El Papel De La Vigilancia, La Jurisprudencia Y Los Derechos Humanos, Giselle Valdez

Independent Study Project (ISP) Collection

Este documento es un estudio de caso sobre la privacidad digital en Ecuador, cómo se protege y cómo se debe mejorar las protecciones. Comienzo presentando la falta de privacidad de la persona en Ecuador, a través de la reciente violación de datos y las tecnologías de vigilancia en todo el país desde China. Luego, para analizar la jurisprudencia y la falta de protección de la privacidad en la ley, hago la transición a un análisis legal de la privacidad de datos en Ecuador a través de la Constitución de 2008. Cuando establezco que falta privacidad digital en Ecuador, demuestro una …

Aging And Rejuvenation During Elastostatic Loading Of Amorphous Alloys, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

Using molecular dynamics simulations, we investigate the effect of uniaxial elastostatic compression on the potential energy, structural relaxation, and mechanical properties of binary glasses. We consider the three-dimensional Kob-Andersen binary mixture, which was initially cooled from the liquid state to the glass phase with a slow rate at zero pressure. The glass was then loaded with a static stress at the annealing temperature during extended time intervals. It is found that the static stress below the yielding point induces large-scale plastic deformation and significant rejuvenation when the annealing temperature is smaller than a fraction of the glass transition temperature. By …

Evaluation Of Haptic Guidance Virtual Fixtures And 3d Visualization Methods In Telemanipulation—A User Study, Kevin Huang, Digesh Chitrakar, Fredrik Rydén, Howard Jay Chizeck

Engineering: Faculty Publications

This work presents a user-study evaluation of various visual and haptic feedback modes on a real telemanipulation platform. Of particular interest is the potential for haptic guidance virtual fixtures and 3D-mapping techniques to enhance efficiency and awareness in a simple teleoperated valve turn task. An RGB-Depth camera is used to gather real-time color and geometric data of the remote scene, and the operator is presented with either a monocular color video stream, a 3D-mapping voxel representation of the remote scene, or the ability to place a haptic guidance virtual fixture to help complete the telemanipulation task. The efficacy of the …

Systems, Apparatus And Method For Material Preparations And / Or Handling, Robert Doebler, Ali Nadim, James D. Sterling, Anna Hickerson, Barbara Erwin, Denice Woyski, Ryan P. Talbot, Bruce Irvine

Business and Information Technology Faculty Research & Creative Works

Oscillating angularly rotating a container containing a mate rial may cause the material to be separate. Denser or heavier material may unexpectedly tend to be collected relatively close to the axis of rotation, while less dense or light material may tend to collect relatively away from the axis of rotation. Oscillation along an arcuate path provides high lysing efficiency. Alternatively, a micromotor may drive an impeller removably received in a container. Lysing may be implemented in batch mode, flow - through stop or semi-batch mode, or flow - through continuous mode. Lysing particulate material may exceed material to be lysed …

Hydrothermal Preparation Of Palladium Supported On Magnetite For Catalysis Applications, Hany A. Elazab, S. A. Hassan, M. A. Radwan, M. A. Sadek

Chemical and Biochemical Engineering Faculty Research & Creative Works

Herein, versatile, and reproducible method to prepare Pd/Fe₃O₄ via hydrothermal synthesis. The vital role of this catalyst is in its potential use in CO oxidation catalysis. The Pd/Fe₃O₄ shows a distinctive activity. TEM images confirmed that Pd nanoparticles of 8-12 nm have a well dispersion on the surface of magnetite (Fe₃O₄). Moreover, the prepared catalyst is recycled with remarkable catalytic activity. This outstanding activity is mainly a direct result of the strong metal-support interaction. The defect sites in the reduced iron oxide act as nucleation centers that enable anchoring of …

Feedback Mechanisms For Centralized And Distributed Mobile Systems, Yan Shi

Electrical Engineering Theses and Dissertations

The wireless communication market is expected to witness considerable growth in the immediate future due to increasing smart device usage to access real-time data. Mobile devices become the predominant method of Internet access via cellular networks (4G/5G) and the onset of virtual reality (VR), ushering in the wide deployment of multiple bands, ranging from TVWhite Spaces to cellular/WiFi bands and on to mmWave. Multi-antenna techniques have been considered to be promising approaches in telecommunication to optimize the utilization of radio spectrum and minimize the cost of system construction. The performance of multiple antenna technology depends on the utilization of radio …

Generalized Relay Network Design And Collaborative Dispatching In Truckload Transportation, Amin Ziaeifar

Operations Research and Engineering Management Theses and Dissertations

The truckload industry faces a serious problem of high driver shortage and turnover rate which is typically around 100\%. Among the major causes of this problem are extended on-the-road times where drivers handle several truckload pickup and deliveries successively; non-regular schedules and get-home rates; and low utilization of drivers dedicated time. These are by-and-large consequences of the driver-to-load dispatching method, which is based on point-to-point dispatching or direct shipment from origin-to-destination, commonly employed in the industry. In this dissertation, we consider an alternative dispatching method that necessitates careful design of an underlying network. In this scheme, a truckload on its …

Development Of A Robotized Laser Directed Energy Deposition System And Process Challenges, Meysam Akbari

Mechanical Engineering Research Theses and Dissertations

Metal additive manufacturing (AM) is a disruptive technology, enabling fabrication of complex and near net shaped parts by adding material in a layer-wise fashion. It offers reduced lead production time, decreased buy-to-fly ratio, and repair and remanufacturing of high value components. AM processes are finding applications in many industrial sectors such as aerospace, automotive, biomedical and mold tooling. However, beside tremendous advantages of AM, there are still some challenges that prevent the adoption of this technology into high standard applications. Anisotropy and inhomogeneity in mechanical properties of the as-built parts and existence of pores and lack-of-fusion defects are considered as …