Engineering Commons^™

Why The Crackling Deformations Of Single Crystals, Metallic Glasses, Rock, Granular Materials, And The Earth’S Crust Are So Surprisingly Similar, Karin A. Dahmen, Jonathan T. Uhl, Wendelin J. Wright

Faculty Journal Articles

Recent experiments show that the deformation properties of a wide range of solid materials are surprisingly similar. When slowly pushed, they deform via intermittent slips, similar to earthquakes. The statistics of these slips agree across vastly different structures and scales. A simple analytical model explains why this is the case. The model also predicts which statistical quantities are independent of the microscopic details (i.e., they are "universal"), and which ones are not. The model provides physical intuition for the deformation mechanism and new ways to organize experimental data. It also shows how to transfer results from one scale to another. …

Mechanical Characterization Of Additively Manufactured Inconel 625 And Alsi10mg Via High-Throughput Tensile Testing, Aron Robbins

Mechanical Engineering ETDs

Additive manufacturing allows for the development of complex geometrical designs that may otherwise be impossible to fabricate through common methods. This advantage has opened the door to a new testing method capable of rapid and efficient material property characterization and qualification. The technique exhibits how 100’s of sub-size tensile bars can be tested to show an inherent statistical variation of materials produced by laser powder bed fusion. The testing technique presented is used to evaluate various heat treatments of the nickel super-alloy Inconel 625 and the aluminum alloy AlSi10Mg after stress relief annealing. Statistical analysis using 3-parameter Weibull distributions is …

Measurement Of Antibacterial Properties Of Foil‑Backed Electrospun Nanofibers, Mary Ann Wagner-Graham, Herbert Barndt, Mark Andrew Sunderland

College of Life Sciences Faculty Papers

Current methodologies for evaluation of antibacterial properties of traditional textiles are not applicable to foil‑backed, poorly‑absorbent electrospun nanofiber materials, since existing test methods require absorbent fabrics. Since electrospun nanofibers are adhered to the foil backing only by electrostatic interactions, methods used to evaluate antibacterial properties of surfaces cannot be used because these protocols cause the nanofibers to lift from the foil backing. Therefore, a novel method for measurement of the antibacterial properties of electrospun metallic foil‑backed nanofiber materials was developed. This method indicated that acetate‑based nanofibers manufactured to contain 5 to 30 weight percent of cold‑pressed hemp seed oil or …

Aspect And Opinion Aware Abstractive Review Summarization With Reinforced Hard Typed Decoder, Yufei Tian, Jianfei Yu, Jing Jiang

Research Collection School Of Computing and Information Systems

In this paper, we study abstractive review summarization. Observing that review summaries often consist of aspect words, opinion words and context words, we propose a two-stage reinforcement learning approach, which first predicts the output word type from the three types, and then leverages the predicted word type to generate the final word distribution. Experimental results on two Amazon product review datasets demonstrate that our method can consistently outperform several strong baseline approaches based on ROUGE scores.

Personality Prediction Through Curriculam Vitae Analysis Involving Password Encryption And Prediction Analysis, Gagandeep Kaur, Shruti Maheshwari

Library Philosophy and Practice (e-journal)

A recruitment process requires an eligibility check, an aptitude evaluation and a psychometric analysis of prospective candidates. The work puts forward an application where the system allows employers to post new job offerings and registered candidates can apply. The application estimates applicant’s emotional aptitude through a psychometric analysis based on a test whereas the professional standard is verified via a technical aptitude test. OCEAN Model is used to assess emotional quotient and predict the personality traits. Machine learning techniques such as Logistic Regression are used for modelling the personality predictor. The details of the candidates are kept secure by using …

Combined Molecular Dynamics And Phase Field Simulation Of Crystal Melt Interfacial Properties And Microstructure Evolution During Rapid Solidification Of Ti-Ni Alloys, Sepideh Kavousi

LSU Doctoral Dissertations

Phase field method has become a popular tool to investigate the microstructure evolution during the solidification. Quantitative predictions using this method is still limited, and in this dissertation, we try to study this problem from different perspectives.

Most of the phase field models consider the solid-liquid interface to be in local equilibrium. Solidification during some manufacturing processes like selective laser melting, and electron beam additive manufacturing is rapid and far from equilibrium which can result in supersaturated solid solutions, segregation-free crystals, or metastable phases. Before obtaining any conclusions from the phase field simulations, we must know the answer for “which …

Using Long-Term Outdoor Exposure Data To Benchmark Accelerated Durability Test Methods, R. Hooton

International Conference on Durability of Concrete Structures

Many performance-based durability test methods adopted in various national and international standards were developed decades ago based on short-term evaluations. Most durability tests use various methods to accelerate reactions in order to obtain results in a reasonably short period of time. Then pass/fail criteria are set for these tests in standard specifications. However, the acceleration techniques used maybe overly severe, and preclude the use of concrete materials and mix designs that perform perfectly well in the field. The inclusion of long-term field tests or outdoor exposure tests can be used to verify the appropriateness of both the test methods and …

Durability Of Cement-Based Materials In Drinking Water Storage, Matthias Schwotzer, Andreas Gerdes

International Conference on Durability of Concrete Structures

In order to provide a hygienic storage drinking water reservoirs have been coated with mineral mortar linings in all epochs of European history. However, modern cement-based materials often show in this special operational environment an inadequate durability. Even though drinking water is commonly not considered particularly harmful to cementitious systems, the chemical degradation of mortar linings in drinking water storage systems can occur very fast compared to other common deterioration reactions. This results in cost intensive repair measures and thus high life-cycle costs as well associated with an ecological burden. Furthermore, an insufficient understanding of degradation mechanisms and their underlying …

Experimental And Numerical Study Of Macro-Cell Corrosion Between Crossed Steel Bars, Zheng Dong, Xianglin Gu, Zhihao Jin

International Conference on Durability of Concrete Structures

Reinforcing steel bars embedded in concrete are always intersected with each other to form rebar mesh or three-dimensional steel cage. The present study aims to investigate the phenomenon of severe corrosion observed at stirrups or some intersections of steel rebar mesh, which has not been well studied before. Macro-cell corrosion between crossed steel bars was considered to be the major cause for this phenomenon. In this regard, crossed steel bars were divided into intersected zone (IZ) and non-intersected zone (NIZ). The macro-cell current at the face-to-face IZ was calculated by Ohm’s law. A one-dimensional model based on transmission line method …

Performance Of High-Volume Fly Ash Self-Compacting Concrete Exposed To External Sulfate Attack, Tareq S. Al-Attar Dr., A. A. Taha

International Conference on Durability of Concrete Structures

The high-volume fly ash concrete, HVFAC, could be defined as any concrete mix having fly ash content larger than 50 percent of the total cementitious materials content. Due to the availability of fly ash in large quantities globally with low cost, HVFAC could be considered as a solution for the environmental impact of Portland cements. In this study the durability of two high-volume fly ash self-compacting concrete, HVFASCC, mixes exposed to the effects of two sulfate aggressive solutions was investigated. The fly ash, class F, contents for these mixes were 50 and 60 percent by weight of Portland cement. The …

Mechanical And Microstructure Characteristics Of Concrete-Mixtures Designed For Durability Of Rc-Structures In Corrosive Environment, Saeid A. Alghamdi Dr., S. Ahmad, M. M. Khaled

International Conference on Durability of Concrete Structures

As exposures to chloride-salts are known as prime factors causing initiation and continuity of corrosion-process of steel reinforcement bars in reinforced concrete (RC) structures, it has always been a major concern for designers considering the requirements of structural-durability for targeted-service life of RC-structures in aggressively corrosive environments typically prevalent in coastal regions. Research works previously reported by the researchers have modeled corrosion-process in terms of corrosion-current density, and it was realized that concrete-mixtures design quality and characteristics, degree of exposures to corrosive-agents such as chloride salts, and protective-concrete cover-thickness are now known beyond doubt to be determinant factors as regards …

Load-Bearing Capacity Of Corroded Reinforced Concrete Structures Caused By Carbonation And Exposed To Xc4, Esko Sistonen

International Conference on Durability of Concrete Structures

Concrete corrosion can be visualized as a combination of chemical reaction on concrete and electrochemical reaction on steel reinforcement. Failure of steel reinforcement due to corrosion can inflict significant stress on concrete during load distribution. As such, it is necessary to analyse the long-term effects of corrosion on the load bearing capacity and bending strength of steel reinforcement. This research investigated the mechanical and electrochemical properties of concrete exposed to long-term corrosion for a period of 16 years. Non-destructive testing like crack width measurements, visual examination, electrochemical measurements using Galva Pulse and determination of average chloride content were undertaken to …

Effect Of Multi- Steel Bolt Anchorages On Composite Beams, Dawei Zhang, H. F. Shi, W. L. Jin, Tamon Ueda

International Conference on Durability of Concrete Structures

Using fiber-reinforced polymer (FRP) to retrofit or strengthen the concrete structures is an attractive option in construction areas nowadays. However, premature debonding failures limit the efficacy of fiber utilization. It is presently accepted that anchorage system is an attractive option to solve this problem. Much efforts has been made through experimental testing and numerical modeling to investigate the anchorage systems, meanwhile various systems were created and developed. However, researches on the mechanism of the anchorage systems are still too rare to build a countable and union design guideline with respect to different premature debonding failure modes. The present paper focused …

Effect Of Corrosion On The Shear Transfer Behavior Of Stud Shear Connectors, Wen Xue, Ju Chen, Ao-Yu Jiang, Wei-Liang Jin

International Conference on Durability of Concrete Structures

The effect of corrosion on the shear transfer behavior of stud shear connectors was investigated in this study. Experimental investigation was performed using an innovative test setup for single stud shear connector. Two series of specimens having different stud diameters were fabricated and tested. The test specimens were firstly corroded to different corrosion rates by electronic accelerating method. Loading test were then performed to obtain the load-slip curves and ultimate strengths of corroded test specimens. Corrosion rates were measured from the studs obtained from the failure test specimens. Test results were compared with standard push out test specimens having the …

Drying Shrinkage Of Hardened Cement Paste And Its Relationship To The Microstructure, Xin Wang, Chaojun Wan, Xiaojing Zhang, Heng Chen

International Conference on Durability of Concrete Structures

The aim of the present study is to relate microstructure to the drying shrinkage of hardened cement paste. Three microstructural features, calcium silicate hydrate(C-S-H), calcium hydroxide(CH) and pore structure were studied. A new method to determine the C-S-H content of hardened cement paste is presented. Drying shrinkage behavior of cement pastes were investigated by drying specimens through successive steps of RH 100% to 7% RH and re-saturating the specimens. The total shrinkage of cement paste after drying to 7% RH and irreversible shrinkage were decreased with the increasing amount of C-S-H and CH. Prolonged curing resulted in a paste with …

Effect Of External Loading On Durability Properties Of Pre-Stressed Concrete Girders With Microcracking, Savitha Sagari Srinivasan, Raissa Douglas Ferron, Michael Rung

International Conference on Durability of Concrete Structures

Over the last fourteen years, very early in the service life of pre-stressed concrete girders, unexplained microcracks have been observed. Their presence led to concerns about the future integrity of the girders, with one of the major concerns being corrosion of pre-stressing strands. As such, a comprehensive study aimed at understanding the effects these microcracks have on the service life of the girders was initiated. Eight in-service girders, under external loads, and five rejected girders, not under external loads, were selected for the study. In this paper, we present work on the temporal evolution of the cracks during a one-year …

Electrochemical Behaviour Of Passive Layers In Weathered Reinforced Mortars, B. Díaz, B. Guitián, X.R. Nóvoa, M.C. Pérez

International Conference on Durability of Concrete Structures

Electrochemical methods are widely employed for assessing the corrosion performance of steel rebars embedded in concrete. Corrosion potential and polarization resistance are the main parameters considered for this purpose; under the assumption that the cathodic process corresponds to oxygen reduction and the anodic process to steel corrosion. Although these assumptions are mostly true, they are not able to explain some transitions from passive to active states, as well as some corrosion potential evolutions. The present contribution is intended to provide an in depth approximation to those questions based on the study of thick passive layers formed over years in atmospheric …

Influence Of Surface Retarders On Texture Profile And Durability Of Upper Layer Of Exposed Aggregate Concrete Pavement, Mariusz Dąbrowski, Miachał Antoni Glinicki, Karolina Gibas, Aneta Antolik, Kinga Dziedzic

International Conference on Durability of Concrete Structures

Exposed aggregate concrete (EAC) pavement technology is used in Poland for construction of major highways and expressways. When properly executed, it is an efficient technique to provide desired friction for skid resistance without compromising the noise limitations. Concrete mix uniformity, proper dosing of retarding agent and optimal time to brush with a mechanical broom are supposed to have a major impact on the properties of the upper pavement layer. An experimental investigation was performed on exposed aggregate concrete specimens manufactured in the laboratory in a way to simulate the industrial production of two-layer concrete slab with exposed aggregate. The texture …

Performance Of Anaerobic Digestion Systems: A Review, Douglas Thompson, Sree Nanukuttan, Daniel Mcpolin

International Conference on Durability of Concrete Structures

Anaerobic digesters contain extreme environments that change drastically during the production cycle. Organic material is broken down first into amino and fatty acids, then into volatile fatty acids, ammonia, CO₂, H₂S and other by-products. These acids and alcohols are converted to acetic acid as well as CO₂ and H₂, which is then used to create methane. All these biological processes mean that the pH, temperature and type of bacteria vary, creating conditions outside the scope of current standards, such as a concentration of ammonium ions 8 times greater than the upper limit of …

Emerging Rapid Aggregate And Concrete Test Methods For Formulating Asr-Resistant Concrete, Anol Mukhopadhyay, Kai-Wei Liu

International Conference on Durability of Concrete Structures

The main objective of this study was to develop rapid aggregate and concrete test methods and a combined innovative approach for formulating performance based ASR resistant concrete mixes. An innovative step by step approach has been developed to formulate ASR resistant concrete mixes based on four recommended steps. In step 1, determination of aggregate ASR composite activation energy (CAE) and threshold alkalinity (THA) by using a rapid aggregate chemical test called volumetric change measuring device (VCMD) is performed. The lower the CAE the higher the reactivity is. Based on the measured CAE and THA, mix design formulation is conducted in …

Study On Accelerated Microbial Corrosion Of Concrete By Artificially Intensified Sewage, L. J. Kong, M. F. Cao, Xiangming Zhou Prof, H. R. Lu, H. Lu, G. Kastiukas

International Conference on Durability of Concrete Structures

In this study, the artificially intensified sewage with different levels of chemical oxygen demand (COD) were prepared, and the changes in weight and strength, as well as the micro morphology, mineral compositions and pore structure of concrete specimens immersed in the artificially intensified sewage and water were investigated in comparison. In parallel, the COD, pH, H₂S and O₂ values, as well as the microbial species and contents of sewage were monitored in the corrosion process. Furthermore, the microbial structure and activities within biofilm developed on concrete surface were also analyzed. The results indicated that the increase of …

The Tsa Degradation Process Within Cement-Based Materials In The Electrical Field Environment, Chong Wang, Zheng Fang, Yaoling Luo

International Conference on Durability of Concrete Structures

The thaumasite form of sulfate attack (TSA) of cement-based materials is a complex degradation process. The degradation process needs abundant water, carbonate, sulfate and silicate. However, there is no detailed study on the TSA degradation process. X-Ray Diffraction (XRD) and chemical analyses were used to study the TSA degradation process based on the present studies. The results indicated that the degradation process of the electrical field was similar to the full immersion, with the main difference being the degradation rate. The electrical field can obviously accelerate the TSA degradation process. The degradation had progressed to the core of the sample, …

Sulfate Resistance Study Of Carbonated Low-Calcium Silicate Systems, Raikhan Tokpatayeva, Jan Olek, Jitendra Jain, Anuj Seth, Nicholas Decristofaro

International Conference on Durability of Concrete Structures

This paper summarizes the results of sulfate resistance study of carbonated mortar specimens made with Solidia CementÔ (SC) and tested for expansion according to ASTM C1012 specification while exposed to three types of soak solutions: sodium sulfate, magnesium sulfate and deionized water. A control set of ordinary portland cement (OPC) mortars was also evaluated. Besides the length change measurements, visual observations of changes in the appearance of specimens were conducted after various lengths of exposure. In addition, microstructural characterization of the specimens was conducted using scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermo-gravimetric analysis (TGA) techniques. …

Freeze-Thaw Resistance Of Concrete: Insight From Microstructural Properties, Sam Adu-Amankwah, Leon Black Dr, M Zajac, J Skoceck, M Ben Haha

International Conference on Durability of Concrete Structures

Composite cements offer low carbon alternatives to conventional CEM I. These binders also generally tend to perform better than CEM I in aggressive chemical environments. However, their freeze-thaw resistance, evident through surface scaling and internal damage is usually impaired. Postulated theories on freeze-thaw induced damage do not fully explain the origin of this weakness in composite cement concretes.

This paper systematically presents the phase assemblage changes associated with the freeze-thaw of concrete specimen made from composite cements with and without limestone. The freeze-thaw test was performed on concrete according to CIF method based on CEN/TR 15177 and the corresponding cement …

Investigation On The Influence Of Concrete Pores On Steel Corrosion Process, Xiaowen Zhang, Yuxi Zhao

International Conference on Durability of Concrete Structures

Concrete pores on the steel/concrete interface have a great influence on the corrosion process of steel bars. The effects of these pores on the corrosion of steel bars are observed and explored in this paper. The specimens which are in the same size and concrete proportion but have a different curing and exposure history are compared and investigated. This paper mainly observes the process of corrosion products filling into macro pores (10-4-10-2m in diameter) which including compaction pores (10-3-10-2m in diameter) and air voids (10-4-10-3 m in diameter). These pores have different effect on the steel corrosion process, and these …

Effect Of Corrosion And Corrosion Rate On The Mechanical Performance Of Carbon And Stainless Steel Reinforcing Bars, Hailong Wang, Xiaoyan Sun, Hangting Kong

International Conference on Durability of Concrete Structures

Steel corrosion is a predominant factor leading to age-related structural degradation. To understand the different effects of pitting corrosion on the mechanical performances of deformed carbon and stainless steel reinforcing bars, an artificially accelerated method was conducted to corrode the steel bars. Using a 3D laser scanner, the three-dimensional models of corroded steel bars were reconstructed. The corrosion characterization was identified based on these 3D profiles. The results indicate that the number and the depth of corrosion pits of both types of steel increase with the increase of corrosion rate, however the pitting corrosion of stainless steel is much more …

Sustainable Concrete With Seawater And Corrosion Resistant Reinforcement: Results Of Monitoring Of Corrosion Behaviour, Elena Redaelli, Maddalena Carsana, Federica Lollini, Matteo Gastaldi, Forood Torabian Isfahani

International Conference on Durability of Concrete Structures

The use of seawater for mixing concrete for reinforced concrete structures is prohibited, since it can promote steel corrosion. However, the use of seawater would contribute to decrease the environmental impact of concrete, in particular in those regions of the world where potable water is a precious resource. The project SEACON-INFRAVATION between University of Miami and Politecnico di Milano, with various industrial partners, aims at investigating the use of seawater for the construction of sustainable and durable reinforced concrete structures and infrastructures. Within the project, that included a vast campaign of laboratory tests, also two demo projects – one in …

Experimental And Numerical Investigation On The Irregularity Of Carbonation Depth Of Concrete Under Supercritical Condition, Hao Bao Masc, Min Yu Dr., Jianqiao Ye Dr., Lihua Xu Dr., Yin Chi Dr., J Ye

International Conference on Durability of Concrete Structures

The heterogeneity of a cement-based material results in a random spatial distribution of carbonation depth, which may significantly affect the mechanical properties and durability of the material. Currently, there is a lack of both experimental and numerical investigations aiming at a statistical understanding of this important phenomenon. This paper presents both experimental and numerical supercritical carbonation test results of concrete blocks. The random fields of porosity and two-dimension random aggregate model of concrete were proposed for the simulation. The carbonation depths are measured and distributed along the carbonation boundary by the proposed rapid image processing technique, which are then statistically …

Interactions Between Reinforcement Corrosion And Chloride Ion Diffusion In Mortar, Chun-Tao Chen Prof., Yi-Chieh Chuang, Chieh-Hao Wu, Chin-Wei Hsu

International Conference on Durability of Concrete Structures

This study explored the diffusion of the chloride ions influenced by the reinforcement corrosion in the mortar. It is believed that, during the corroding process, a small current is generated at the surface of the reinforcement. Such current is supposed to influence the diffusion of the chloride ions, but the relationship between both was not well studied in the literature. In this study, the corroded reinforcements were prepared by applied currents. Reinforced mortar specimens with w/c of 0.6 were then prepared and cured by either salt or fresh water. Results showed that the chloride ion distribution was likely associated with …

Sustainable Solutions, Fall/Winter 2020, Issue 41

Sustain Magazine

No abstract provided.