Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 63961 - 63990 of 197168

Full-Text Articles in Engineering

The Challenges Facing Autonomous Vehicles And The Progress In Addressing Them, Garrett Johnson Dec 2019

The Challenges Facing Autonomous Vehicles And The Progress In Addressing Them, Garrett Johnson

Senior Honors Theses

Autonomous vehicles are an emerging technology that faces challenges, both technical and socioeconomic. This paper first addresses specific technical challenges, such as parsing visual data, communicating with other entities, and making decisions based on environmental knowledge. The technical challenges are to be addressed by the fields of image processing, Vehicle to Everything Communication (V2X), and decision-making systems. Non-technical challenges such as ethical decision making, social acceptance, and economic pushback are also discussed. Ethical decision making is discussed in the framework of deontology vs utilitarianism, while social acceptance of utilitarian autonomous vehicles is also investigated. Last, the likely economic impact is …

Go to article

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono Dec 2019

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Go to article

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda Dec 2019

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Go to article

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir Dec 2019

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Go to article

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani Dec 2019

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

Go to article

Anomalous Stranski-Krastanov Growth Of (111)-Oriented Quantum Dots With Tunable Wetting Layer Thickness, Christopher F. Schuck, Simon K. Roy, Trent Garrett, Paul J. Simmonds Dec 2019

Anomalous Stranski-Krastanov Growth Of (111)-Oriented Quantum Dots With Tunable Wetting Layer Thickness, Christopher F. Schuck, Simon K. Roy, Trent Garrett, Paul J. Simmonds

Materials Science and Engineering Faculty Publications and Presentations

Driven by tensile strain, GaAs quantum dots (QDs) self-assemble on In0.52Al0.48As(111)A surfaces lattice-matched to InP substrates. In this study, we show that the tensile-strained self-assembly process for these GaAs(111)A QDs unexpectedly deviates from the well-known Stranski-Krastanov (SK) growth mode. Traditionally, QDs formed via the SK growth mode form on top of a flat wetting layer (WL) whose thickness is fixed. The inability to tune WL thickness has inhibited researchers’ attempts to fully control QD-WL interactions in these hybrid 0D-2D quantum systems. In contrast, using microscopy, spectroscopy, and computational modeling, we demonstrate that for GaAs(111)A QDs, we …

Go to article

Autonomous Vehicle Interior Design, Nathaniel Torchalski Dec 2019

Autonomous Vehicle Interior Design, Nathaniel Torchalski

Honors Theses

As technology in the automotive industry advances and self-driving vehicles become more commercially available, design concepts for their interiors must also be developed. Research was conducted on automotive design and autonomous technology, drawing inspiration from production and concept vehicles of the past, present, and future. A survey was conducted to gauge possible consumer needs. Hand sketches, small-scale models, and a Computer-Aided Design (CAD) model was produced. A full-size model was developed using various material-forming processes, including 3D printing, woodworking, clay sculpting, and metal machining. The interior was designed with consideration for safety, comfort, and technological advancements to satisfy the needs …

Go to article

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar Dec 2019

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Go to article

Scatterometer Cross Calibration Using Volume Scattering Models For Amazon Rainforest Canopies, Evan Neil Chrisney Dec 2019

Scatterometer Cross Calibration Using Volume Scattering Models For Amazon Rainforest Canopies, Evan Neil Chrisney

Theses and Dissertations

Spaceborne scatterometers have measured the normalized radar cross section (RCS) of the earth's surface for several decades. Two frequencies, C- and Ku-band, have been used in designing scatterometers, such as with the Ku-band NASA Scatterometer (NSCAT) and the C-band Advanced Scatterometer (ASCAT). The scatterometer data record between C- and Ku-band has been disjoint for several decades due to the difficulties in cross calibration of sensors that operate at different frequencies and incidence angles. A model for volume scattering over the Amazon rainforest canopy that includes both the incidence angle and frequency dependence is developed to overcome this challenge in cross …

Go to article

Autonomous Vehicle Interior Design, Luis Vargas Dec 2019

Autonomous Vehicle Interior Design, Luis Vargas

Honors Theses

As technology in the automotive industry advances and self-driving vehicles become more commercially available, design concepts for their interiors must also be developed. Research was conducted on automotive design and autonomous technology, drawing inspiration from production and concept vehicles of the past, present, and future. A survey was conducted to gauge possible consumer needs. Hand sketches, small-scale models, and a Computer-Aided Design (CAD) model was produced. A full-size model was developed using various material-forming processes, including 3D printing, woodworking, clay sculpting, and metal machining. The interior was designed with consideration for safety, comfort, and technological advancements to satisfy the needs …

Go to article

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman Dec 2019

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Go to article

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer Dec 2019

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Go to article

A Multi-Scale Approach To Study Biochemical And Biophysical Aspects Of Resveratrol On Diesel Exhaust Particle-Human Primary Lung Cell Interaction, Wei Zhang, Qifei Li, Mingjie Tang, Han Zhang, Xiaoping Sun, Sige Zou, Judy L. Jensen, Theodore G. Liou, Anhong Zhou Dec 2019

A Multi-Scale Approach To Study Biochemical And Biophysical Aspects Of Resveratrol On Diesel Exhaust Particle-Human Primary Lung Cell Interaction, Wei Zhang, Qifei Li, Mingjie Tang, Han Zhang, Xiaoping Sun, Sige Zou, Judy L. Jensen, Theodore G. Liou, Anhong Zhou

Biological Engineering Faculty Publications

Diesel exhaust particles (DEPs) are major air pollutants that lead to numerous human disorders, especially pulmonary diseases, partly through the induction of oxidative stress. Resveratrol is a polyphenol that ameliorates the production of reactive oxygen species (ROS) and delays aging-related processes. Herein we studied the cytoprotective effect of resveratrol on DEP-exposed human lung cells in a factorial experimental design. This work investigates biophysical features including cellular compositions and biomechanical properties, which were measured at the single-cell level using confocal Raman microspectroscopy (RM) and atomic force microscopy (AFM), respectively. Principal component analysis (PCA), hierarchical cluster analysis (HCA) and partial least square …

Go to article

Methodology Of Topology Optimization, Naziha Khandoker Dec 2019

Methodology Of Topology Optimization, Naziha Khandoker

Honors Theses

The need for lighter products is becoming increasingly essential as it cuts material cost and significant amount of weight, which is a key factor in the automotive and aerospace industries. Topology optimization allows us to achieve that by applying the concept to different structures with the goal of optimal distribution of material within finite volume design domain. Its algorithms selectively remove and relocate elements to achieve the optimum performance. This project performs a study on the effect of each design parameter over mechanical performance using Finite Element Analysis and applies it to set of wing attachment brackets. The optimized brackets …

Go to article

Multiscale Modeling Of Fracture In Quasi-Brittle Materials Using Bifurcation Analysis And Element Elimination Method, Keyvan Zare Rami Dec 2019

Multiscale Modeling Of Fracture In Quasi-Brittle Materials Using Bifurcation Analysis And Element Elimination Method, Keyvan Zare Rami

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Analyzing the fracture of heterogeneous materials is a complex problem, due to the fact that the mechanical behavior of a heterogeneous material is strongly dependent on a variety of factors, such as its microstructure, the properties of each constituent, and interactions between them. Therefore, these factors must be effectively taken into account for accurate analysis, for which the multiscale method has been widely used. In this scheme, the computational homogenization method is used to obtain the effective macroscopic properties of a heterogeneous material based on the response of a Representative Volume Element (RVE). The growth of damage in an RVE …

Go to article

Mems 411: Improved Greens Harvester, Matthew Celentano, Nicholas Watts, Sam Friedrich, Ava Mennin Dec 2019

Mems 411: Improved Greens Harvester, Matthew Celentano, Nicholas Watts, Sam Friedrich, Ava Mennin

Mechanical Engineering Design Project Class

Earth Dance Organic Farm School has asked that we design an improved version of their “Quick-Cut” greens harvester. The redesign should be capable of cutting a 36 inch wide bed of greens, should roll on wheels, and should be able to operate for long periods without interruption. This report details the concept generation and selection phases of the project, wherein we elect to design the system with an aluminum extrusion frame, four- wheeled custom band saw system, and rope sweepers, among other key features. In the concept embodiment phase, we explore the features of our initial prototype and areas for …

Go to article

Optimizing On-Street Parking Supply With Analytical Models, Chawalit Tipagornwong Dec 2019

Optimizing On-Street Parking Supply With Analytical Models, Chawalit Tipagornwong

Dissertations and Theses

Commercial vehicles are crucial for the urban economy, but they generate negative impacts as well. This leads to restrictions such as a reduction in the number of loading zones. The result is that commercial drivers spend a significant amount of time searching for available loading zones. To avoid searching for parking, some commercial drivers double park, which causes traffic congestion. Therefore, the number of loading zones should be set properly. Since a curb is allocated between both loading zones and parking spaces, both parking types have to be considered. Many on-street parking management strategies have been implemented, including pricing meter …

Go to article

A-Step 2030 – New Research Project Presents A Picture Of The Skills Needed For Engineers To Solve The Sustainable Development Goals (Sdgs)., Una Beagon Dec 2019

A-Step 2030 – New Research Project Presents A Picture Of The Skills Needed For Engineers To Solve The Sustainable Development Goals (Sdgs)., Una Beagon

Articles

Communication and Technical Skills will still be the most important attributes required of engineers in the future, according to a new study by the A-STEP 2030 Erasmus+ funded project. The project which is led by ENSTA Bretagne, France and has academic partners in TU Dublin, Metropolia University of Applied Sciences in Finland and Aalborg University in Denmark aims to develop innovative teaching approaches for engineering students which will attract a more diverse student body to the engineering profession.

Go to article

Usu Alumni Develop Industry-Changing Aviation Technology | College Of Engineering, Utah State University Dec 2019

Usu Alumni Develop Industry-Changing Aviation Technology | College Of Engineering, Utah State University

College of Engineering News

A pair of Utah State University alumni helped develop a new technology that will forever change aviation safety.

Go to article

Thermodynamic Model Of Co2 Deposition In Cold Climates, Sandra K. S. Boetcher, Ted Von Hippel, Matthew J. Traum Dec 2019

Thermodynamic Model Of Co2 Deposition In Cold Climates, Sandra K. S. Boetcher, Ted Von Hippel, Matthew J. Traum

Publications

A thermodynamic model, borrowing ideas from psychrometric principles, of a cryogenic direct-air CO2-capture system utilizing a precooler is used to estimate the optimal CO2 removal fraction to minimize energy input per tonne of CO2. Energy costs to operate the system scale almost linearly with the temperature drop between the ingested air and the cryogenic desublimation temperature of CO2, driving siting to the coldest accessible locations. System performance in three Arctic/Antarctic regions where the proposed system can potentially be located is analyzed. Colder ambient temperatures provide colder system input air temperature yielding lower CO2 removal energy requirements. A case is also …

Go to article

Effect Of Surface Roughness On Ultrasonic Inspection Of Electron Beam Melting Ti‐6al‐4v, Evan T. Hanks, Anthony N. Palazotto, David Liu Dec 2019

Effect Of Surface Roughness On Ultrasonic Inspection Of Electron Beam Melting Ti‐6al‐4v, Evan T. Hanks, Anthony N. Palazotto, David Liu

Faculty Publications

Experimental research was conducted on the effects of surface roughness on ultrasonic non-destructive testing of electron beam melted (EBM) additively manufactured Ti-6Al-4V. Additive manufacturing (AM) is a developing technology with many potential benefits, but certain challenges posed by its use require further research before AM parts are viable for widespread use in the aviation industry. Possible applications of this new technology include aircraft battle damage repair (ABDR), small batch manufacturing to fill supply gaps and replacement for obsolete parts. This paper aims to assess the effectiveness of ultrasonic inspection in detecting manufactured flaws in EBM-manufactured Ti-6Al-4V. Additively manufactured EBM products …

Go to article

An Approach To Fast Multi-Robot Exploration In Buildings With Inaccessible Spaces, Matt Mcneill, Damian Lyons Dec 2019

An Approach To Fast Multi-Robot Exploration In Buildings With Inaccessible Spaces, Matt Mcneill, Damian Lyons

Faculty Publications

The rapid exploration of unknown environments is a common application of autonomous multi-robot teams. For some types of exploration missions, a mission designer may possess some rudimentary knowledge about the area to be explored. For example, the dimensions of a building may be known, but not its floor layout or the location of furniture and equipment inside. For this type of mission, the Space- Based Potential Field (SBPF) method is an approach to multirobot exploration which leverages a priori knowledge of area bounds to determine robot motion. Explored areas and obstacles exert a repulsive force, and unexplored areas exert an …

Go to article

Carrying Capacity Of Single-Gauge Railways At Introduction Of Speed Motion Of Passenger-Trains, Saidburkhan Tulaganovich Djabbarov Dec 2019

Carrying Capacity Of Single-Gauge Railways At Introduction Of Speed Motion Of Passenger-Trains, Saidburkhan Tulaganovich Djabbarov

Journal of Tashkent Institute of Railway Engineers

Results over of complex researches of organization of speed and high-speed motion of passenger-trains are brought on existent single-gauge railways, choice and ground of complex of measures on the increase (to maintenance) of freight and throughput capacity, and ensure continuous operation of the infrastructure of operated railways are presented.

Go to article

Problems Of The State Of The Rolling Surface Of The Rail Head On Speed And High-Speed Railway Sections Of Jsc "Uzbekistan Temir Yollari", Kuvandik Saginovich Lesov, Igor Ivanovich Kuznetsov, Mukhamedali Kazbek Ugli Kenjaliev, Xushnudbek Odilbekovich Samandarov Dec 2019

Problems Of The State Of The Rolling Surface Of The Rail Head On Speed And High-Speed Railway Sections Of Jsc "Uzbekistan Temir Yollari", Kuvandik Saginovich Lesov, Igor Ivanovich Kuznetsov, Mukhamedali Kazbek Ugli Kenjaliev, Xushnudbek Odilbekovich Samandarov

Journal of Tashkent Institute of Railway Engineers

In the process of train traffic on the rolling surface of the rail head are formed bumps and fatigue defects, constant dynamic loads lead to the frustration the upper structure of the path. In this article the analyzes integral indicators of the rolling surface of the rails (long waves, medium waves, short waves) on the section of speed and high-speed train traffic for assess the condition of rails in transit. Problems with the formation of wave-like irregularities on the surface of the rails are identified, promising directions in solving this problem are indicated.

Go to article

Improvement Of Efficiency Of “O‘Zbekiston” Series Electric Locomotive Control System, Usan Berdiev, Malika Nabievna Tuychieva Dec 2019

Improvement Of Efficiency Of “O‘Zbekiston” Series Electric Locomotive Control System, Usan Berdiev, Malika Nabievna Tuychieva

Journal of Tashkent Institute of Railway Engineers

This article examines the work of efficient use of electric locomotives of the “O‘ZBEKISTON” series operated in the railways of Uzbekistan, storage in working parts, provision of reliable and safe operations, as well as reduction of operating costs and extension of the repair period. For this purpose, during operation, it is constantly necessary to analyze and develop the possibility to achieve planned results using effective methods of technical diagnostics system.

Go to article

Theoretical Foundations For Determining Kinematic Parameters Of A Jet Unit, Kudrat Raximov, A.R. Babaev, Dilbar Abduraimova Dec 2019

Theoretical Foundations For Determining Kinematic Parameters Of A Jet Unit, Kudrat Raximov, A.R. Babaev, Dilbar Abduraimova

Journal of Tashkent Institute of Railway Engineers

This article discusses the theoretical basis of the dependence of the kinematic parameters, in particular the average speed of flow rate in the suction pipeline of the jet apparatus intended for cleaning water bodies from silting, from changes in the pressure in the mixing chamber. In the problem is considered a single-phase flow, that is, the density of the working and the suction fluid are the same.

Go to article

Increasing The Efficiency Of Work Of Locomotive Electronic Equipment By Using Portable Diagnostic Devices, Nodir Botirovich Adilov, Nurilla Khayrullayevich Ermatov Dec 2019

Increasing The Efficiency Of Work Of Locomotive Electronic Equipment By Using Portable Diagnostic Devices, Nodir Botirovich Adilov, Nurilla Khayrullayevich Ermatov

Journal of Tashkent Institute of Railway Engineers

This article discusses the current trends in the construction of portable and stationary systems for diagnosing electric and electronic components of locomotives built on integrated chips, as well as presents own model of a portable diagnostic stand for testing electronic devices and electric circuits of locomotives

Go to article

Evaluation Of The Efficiency Of Flat Sunny Solar Air Heaters With Heat Transfer Turbulizers, Yorkin Sodikovich Abbasov, Muyassar Abubakirovna Umurzakova Dec 2019

Evaluation Of The Efficiency Of Flat Sunny Solar Air Heaters With Heat Transfer Turbulizers, Yorkin Sodikovich Abbasov, Muyassar Abubakirovna Umurzakova

Journal of Tashkent Institute of Railway Engineers

The article presents methods for assessing the effectiveness of flat solar air heaters with heat transfer turbulators. The experience of world scientific achievements in the field of increasing the efficiency of solar air heaters is analyzed. The analysis of the effectiveness of flat air heaters. According to the results of the study, it was determined that, in addition to the traditional formula efficiency, for evaluating the effectiveness of flat air heaters with heat transfer turbulators collectors use methods developed in heat engineering and based on the Reynolds analogy.

Go to article

Comparative Analysis Of Modern Electric Centralization Systems, Asadulla Raximovich Azizov, Elnara Kuandikovna Ametova Dec 2019

Comparative Analysis Of Modern Electric Centralization Systems, Asadulla Raximovich Azizov, Elnara Kuandikovna Ametova

Journal of Tashkent Institute of Railway Engineers

This article discusses a comparative analysis of modern electrical centralization systems. The possibilities of developing computer centralizations and centralizations implemented on blocks manufactured using microprocessors are discussed

Go to article

To The Calculation Of Solid-State Cargo Attachment Under The Influence Of Longitudinal Forces, Khabibulla Turanov, Yadgor Ruzmetov, Jamol Shihnazarov Dec 2019

To The Calculation Of Solid-State Cargo Attachment Under The Influence Of Longitudinal Forces, Khabibulla Turanov, Yadgor Ruzmetov, Jamol Shihnazarov

Journal of Tashkent Institute of Railway Engineers

The article is devoted to the calculation of cargo fastening using the current method. It is proved that according to the existing method, the force in all elastic cargo mounts of both one and the other direction under the influence of longitudinal forces has the same value, regardless of the different location of the geometric parameters of the mounts in space. Calculations of forces in elastic elements of fastening by the specified method are given. The results of the comparative analysis showed that the forces in all wire fasteners, in contrast to the existing method of calculation, have different values. …

Go to article

First Prev Next Last