Engineering Commons^™

Characterization And Antibacterial Properties Of Centrifugally Spun Polyvinylpyrrolidone/Copper(Ii) Acetate Composite Fibers, Batool Ibrahim, Roberto Curiel, Sara Ibrahim, Luis A. Materon, Oleg Ermolinsky, Helia Magali Morales, Jason Parsons, Mataz Alcoutlabi

School of Integrative Biological & Chemical Sciences Faculty Publications

The demand for effective antibacterial materials is growing rapidly in today’s world. Both metallic and metal oxide nanoparticles have been widely used as antibacterial agents against various bacterial species due to their unique mechanisms of destroying bacterial membrane cells. The current study explores the antibacterial activity of centrifugally spun fibers prepared from copper acetate polyvinylpyrrolidone (PVP) ethanol precursor solutions against both Gram-negative and Gram-positive bacteria. During the synthesis of the composite fibers, the physical and chemical conditions were optimized. The structure and morphology of the PVP/Cu-Ac fibers were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy …

Cal Poly (Cp) Legged Robot, Sebastian Barboza, Jonathan Mchale, Isabella Sorensen, Isaac Golan

Mechanical Engineering

The Navy spends $60 billion annually on dangerous ship maintenance performed by sailors. To save lives and resources, the Naval Surface Warfare Center (NSWC) is looking for robots to replace sailors and navigate ships to perform various tasks. Robots with tracks and wheels have been most recently explored by NSWC, however they have encountered significant problems navigating the ships, especially through naval ship doorways with a significant ledge. By using a legged robot, our team hopes to solve these problems and have a robot that can navigate the ship with relative ease and stability.

Stress-Relaxation And Failure Properties Of Spinal Ligaments In Pigs With And Without Scoliosis-Like Deformity, Christian D'Andrea, Mattan Orbach, Dogerno Norceide, Madeline Boyes, Axel Moore, Jacob Jordan, Thomas Schaer, Anita Singh, Patrick Cahill, Edward Vresilovic, Brian Snyder, Sriram Balasubramanian

Student Papers, Posters & Projects

This study addresses the need for accurate tissue material properties in computational models of the spine. Fundamental to functional spinal unit (FSU) biomechanics are the stress-relaxation and failure properties of the interspinous and intertransverse ligaments (ISL and ITL, respectively). These were measured and compared in normative and scoliotic spines using a Yorkshire pig model. Skeletally immature female pig spines were posterolaterally tethered to induce scoliosis. 23 ISLs and 17 ITLs excised from normative and scoliotic spine segments underwent stress-relaxation and failure tests. Group comparisons tested the effects of scoliosis (magnitude, convexity versus concavity), spinal level (thoracic, lumbar), and pig age. …

Rehabilitation Of Reinforced Concrete Columns Pre-Damaged By Corrosion Using Advanced Composite Materials, Feras Farid Abu Obaida

Dissertations

Reinforced concrete (RC) columns exposed to aggressive environments are highly susceptible to corrosion-induced deterioration, resulting in significant reductions in load-carrying capacity. This research investigates the structural performance of RC circular short columns with varying levels of corrosion damage and evaluates the effectiveness of two composite-based repair techniques, namely carbon fabric-reinforced cementitious matrix (C-FRCM) and carbon fiber-reinforced polymer (C-FRP) composites, combined with concrete cover replacement. The study aims to establish these methods as practical solutions for rehabilitating corrosion-damaged columns under concentric and eccentric loading conditions. The experimental program included 30 RC column specimens tested in two phases. Phase I involved thirteen …

The Role Of Atmospheric Turbulence On Cloud Droplet Distribution And Droplet Impaction On An Airfoil, Arash Shad, Hashnayne Ahmed, ‪Nadim Zgheib, S. Balachandar, S. A. Sherif

Mechanical Engineering Faculty Publications

We conduct turbulence-informed Euler–Lagrange simulations of droplet-laden flow to examine the effects of atmospheric turbulence on droplet impingement characteristics on a NACA 0012 airfoil. We implement statistical overloading, whereby we inject millions of droplets, ranging in diameter from 1 to 160 microns, upstream of the airfoil at an average streamwise velocity of 120 m/s. Within a fraction of a second, these droplets would have either impinged on the airfoil or continued downstream. While the incoming air flow is maintained uniform, droplet injection is informed by ambient turbulence, affecting both the droplet velocity distribution as well as the size-dependent preferential concentration …

Characterizing Piezoelectric-Blended Polydimethylsiloxane For Use As A Mechanoelectrical Responsive Cell Culture Substrate, Alexis P. Applequist, Lance D. Cordes, Lais A. Ferreira, Kartik Balachandran

Biomedical Engineering Faculty Publications and Presentations

In this study, we developed a piezoelectric-polydimethylsiloxane (pz-PDMS) composite by blending poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) with PDMS to create a biocompatible, mechanoelectrical responsive material. The pz-PDMS was synthesized with varying piezoelectric concentrations (0%, 1%, 3%, and 5%) and characterized for visual properties, mechanical properties, mechanoelectrical sensitivity, and biocompatibility. Compression testing showed no significant change in mechanical strength with the addition of piezoelectric particles, while mechanolectrical sensitivity testing revealed a non-linear increase in voltage response, with 5% pz-PDMS producing the highest sensitivity. Fatigue testing demonstrated no change in sensitivity after 7 days of cyclic displacement. Additionally, microcantilever experiments demonstrated the high fidelity …

Cost-Optimized Energy Management For Urban Multi-Story Residential Buildings With Community Energy Sharing And Flexible Ev Charging, Nishadi Weerasinghe Mudiyanselage, Asma Aziz, Bassam Al-Hanahi, Iftekhar Ahmad

Research outputs 2022 to 2026

Multi-story residential buildings present distinct challenges for demand-side management due to shared infrastructure, diverse occupant behaviors, and complex load profiles. Although demand-side management strategies are well established in industrial sectors, their application in high-density residential communities remains limited. This study proposes a cost-optimized energy management framework for urban multi-story apartment buildings, integrating rooftop solar photovoltaic (PV) generation, shared battery energy storage, and flexible electric vehicle (EV) charging. A Mixed-Integer Linear Programming (MILP) model is developed to simulate 24 h energy operations across nine architecturally identical apartments equipped with the same set of smart appliances but exhibiting varied usage patterns to …

Harmonic Mitigation In Unbalanced Grids Using Hybrid Pso-Ga Tuned Pr Controller For Two-Level Spwm Inverter, Pema Dorji, Taimoor Muzaffar Gondal, Stefan Lachowicz, Octavian Bass

Research outputs 2022 to 2026

This study proposes an integrated control–optimization framework for harmonic mitigation in two-level, grid-connected inverters with battery energy storage operating under unbalanced grid conditions. A proportional–resonant controller in the stationary (Formula presented.) frame and a proportional–integral controller in the synchronous (Formula presented.) frame are compared, with controller gains optimized using PSO, GA, and a hybrid PSO–GA approach. The hybrid method achieves superior trade-offs among THD, convergence speed, and computational effort. For the PR controller, hybrid PSO–GA reduces THD to 1.07%, satisfying IEEE 1547 and IEC 61727 standards, while for the PI controller it achieves 2.70%, outperforming standalone PSO (4.12%) and GA …

Harnessing The Power Of Amphoterically Modified Chitosan Coagulants For Enhanced Polyester Microplastic Fibre Removal From Water, Nimesha Thathsarani, Mohadeseh Najafi, Mehdi Khiadani, Muhammad Rizwan Azhar, Masoumeh Zargar

Research outputs 2022 to 2026

Microplastic fibre (MPF) is the dominant type of microplastic present in water treatment plants’ influent. Coagulation–flocculation followed by sedimentation effectively removes microplastics during pre-treatment; however, conventional inorganic coagulants produce high sludge volume, causing secondary pollution. Chitosan offers a greener alternative but is limited by poor solubility and low molecular weight. In this study, two amphoteric modifications were successfully incorporated into Chitosan, including CMC-CTA, synthesised by modifying carboxymethyl Chitosan (CMC) with 3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CTA); and CMC-g-PDMC, synthesised by grafting poly[(2-methacryloyloxyethyl) trimethyl ammonium chloride] (PDMC) onto CMC. Their coagulation performance for MPF removal was assessed by turbidity measurement. The effects …

Multi-Criteria Decision-Making And Uncertainty Analyses Of Off-Grid Hybrid Renewable Energy Systems For An Island Community, Dibyendu Roy, Hadi Taghavifar, Kumar Vijayalakshmi Shivaprasad, Yaodong Wang, Barun K. Das, Anthony Paul Roskilly

Research outputs 2022 to 2026

This study examines advanced hybrid renewable energy system configurations designed for a remote island community. The configurations integrate multiple technologies, including wind turbines, photovoltaic panels, fuel cells, diesel generators, batteries, converters, electrolyzers, and hydrogen storage tanks, enabling a synergetic approach to energy generation, storage, and management. Excess electricity produced from the systems is utilized for battery charging and green hydrogen production, enhancing system flexibility and resilience. A detailed techno-economic and environmental assessment of the configurations was performed. Furthermore, the Technique for Order of Preference by Similarity to Ideal Solution based multicriteria decision-making framework was employed to identify the optimal configuration. …

Interface And Mechanical Properties Of 1d And 1d-2d Carbon Nanomaterials In Copper Matrix, Abigail L. Eaton, Arun K. Nair

Mechanical Engineering Faculty Publications and Presentations

Low-dimensional carbon nanomaterials have unique electron density distributions which warrant their classification as 1D and 2D, and they are useful for a wide variety of nanocomposite applications. This group includes 1D carbyne, which has high stiffness, and a 1D-2D hybrid composed of carbyne and a highly elastic cyclo[18] carbon ring (2D). We use density functional theory and molecular dynamics methods to study the interface properties of carbyne and the hybrid on Cu (111) surface and determine the mechanical properties of nanocomposites comprised of the nanomaterials as a fiber in Cu matrix at varying temperatures. We predict that on Cu (111) …

Influence Of Organic Matter And Mineral Composition On Carbonate Source Rock Wettability: Implications For Co2 Geostorage, Muhammad Usman, Nurudeen Yekeen, Muhammad Ali, Mujahid Ali, Alireza Keshavarz, Stefan Iglauer, Volker Vahrenkamp

Research outputs 2022 to 2026

Wettability is critical in determining carbon dioxide (CO2) behavior during geological sequestration in unconventional reservoirs. Unconventional reservoirs are compositionally heterogeneous, affecting CO2 plume migration, containment security, and storage capacity during geological sequestration. Previous studies on CO2 storage in unconventional reservoirs have primarily attributed to changes in organic matter content; however, this study examines how variations in the mineralogical and organic matter content combined affect wettability in CO2/brine systems under subsurface conditions. Three samples with varied mineralogy and TOC content were selected from a well drilled in Jordan source rocks—an immature analog of marine-derived, carbonate-dominated, Type IIS source rocks. Samples were …

Generation Expansion Planning: Transitioning Toward Decarbonization With A Focus On Reliability And Dunkelflaute, Taraneh Ghanbarzadeh, Daryoush Habibi, S. M.Muslem Uddin, Asma Aziz

Research outputs 2022 to 2026

Modern power systems increasingly rely on variable renewable energy sources, supported by energy storage systems and gas power plants, to meet decarbonization targets. However, the high penetration of renewables introduces significant uncertainty due to their weather-dependent nature, posing challenges to system reliability. This paper proposes a probabilistic, multi-level generation expansion planning framework that integrates reliability assessments, with a particular emphasis on the role of energy storage systems. A novel probabilistic approach is also introduced to model the Dunkelflaute phenomenon and evaluate its impact on system reliability. Additionally, the study explores the influence of regulatory mechanisms — referred to as embedded …

Adaptive Guard Band And Power Control For Resource Allocation In Mobile And Fixed Mission-Critical Iout Networks, Walid K. Hasan, Iftekhar Ahmad, Quoc Viet Phung, Daryoush Habibi

Research outputs 2022 to 2026

The Internet of Underwater Things (IoUT) is transforming underwater communication by enabling essential mission-critical applications such as precise navigation, emergency response coordination, diver safety, robust security and surveillance systems, and real-time environmental monitoring. However, Underwater Acoustic Communication (UAC), which serves as the primary communication medium for IoUT, experiences substantial challenges, including limited bandwidth availability, severe signal attenuation and Doppler-induced frequency shifts, especially pronounced in mobile underwater environments. These challenges degrade throughput and increase latency, making it difficult to meet the strict delay and reliability demands of mission-critical IoUT applications. Without adaptive solutions, real-time underwater communication remains unreliable and inefficient. This …

Strategies For Increasing Methane Removal In Methanotroph Stirred-Tank Reactors For The Production Of Ectoine, Jaden Storrer, Tansley M. Mazurkiewicz, Bodee Hancock, Ronald C. Sims

Biological Engineering Student Research

Methane is a potent greenhouse gas that requires its emissions to be mitigated. A significant source for methane emissions is in the form of the biogas that is produced from anaerobic digestion in wastewater reclamation and landfill facilities. Biogas has a high valorization potential in the form of its bioconversion into ectoines, an active ingredient in skin care products, by halotolerant alkaliphilic methanotrophs. Cultures of Methylotuvimicrobium alcaliphilum 20Z were grown in bench scale stirred-tank reactors to determine factors to improve methane uptake and removal. Tangential flow filtration was also implemented for a bio-milking method to recover ectoine from culture media. …

Crisis Observatory: Extracting Credible Signals During A Crisis In The Age Of Llms, Kuan-Chieh Lo, Pranav Maneriker, Sriram Sai Ganesh, Dominik Winecki, Kelly Garrett, Ayaz Hyder, Arnab Nandi, Valerie Shalin, Shannon A. Bowen Ph.D., Amit Sheth, Srinivasan Parthasarathy

Publications

Systems for crisis response have required several different models for the analysis of unstructured text, such as identifying needs, locations, topics, routing, and matching of needs with available responders. Large Language Models (LLMs) have replaced task-specific models across various language processing tasks. However, LLMs are known to be limited by their training data, collected before the crisis. In this demo, we explore the use of LLMs for crisis response scenarios with rapidly evolving information environments. We show how the augmentation of these models with external reliable sources of crisis-specific information can help build adaptive systems for response. The demonstration video …

Development And Characterization Of Sustainable Aluminum Metal Matrix Composites With Date Palm Agro-Residues As Reinforcement, Ansar Kareem

Dissertations

Aluminum Matrix Composites (AMCs) are extensively used in various industrial applications owing to their exceptional mechanical, material, and tribological properties. This led to the development of AMCs with every possible aluminum alloy as matrix, incorporated with various reinforcement materials to achieve desired material properties. There has been an increasing trend in the utilization of agricultural and industrial waste products as reinforcement material in AMCs. Date palm trees produce huge quantity of agricultural waste in different forms. Usually, these wastes are burned or disposed of in landfills which cause environmental pollution. Date palm agro-wastes can be incinerated to produce date palm …

Environmental Regulations And The Exploitation Of Deep Seabed Minerals : A New Era For The“Mining Code” Of The International Seabed Authority (Isa)?, Mikyla D'Antoinette Frederick-Winter

World Maritime University Dissertations

No abstract provided.

The Impact Of Relative Bridge Width On Highway Crashes In Nebraska, Mujahid Ali Bahadur

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This research examines how bridge width relative to the approach roadway affects crash occurrence on Nebraska highways. The Nebraska Department of Transportation-(NDOT) Bridge Design Manual sets minimum bridge widths based on roadway classification, traffic projections, and the American Association of State Highway and Transportation Officials’ (AASHTO) Load and Resistance Factor Design (LRFD) criteria. While these guidelines ensure structural and functional adequacy, they do not incorporate safety performance analyses based on crash data. This leaves an important gap in understanding how bridge and approach roadway width decisions influence safety outcomes.

This research has four objectives: (1) evaluate crash frequency across different …

Evaluation Of The Viability Of Optimised Hull Forms For Bulk Carriers, John Peter Kabonge

World Maritime University Dissertations

No abstract provided.

The Ratification And Implementation Of The International Maritime Organisation (Imo) Instruments : A Social And Policy Persepctive On Maritime Governance In Fiji, Miriama Latianara

World Maritime University Dissertations

No abstract provided.

Oil Spill Pollution In The Caspian Sea In Case Of Azerbaijan : Evaluating Spill Patterns And Governance Gaps In Azerbaijan’S Marine Oil Pollution Response, Ulviyya Hasanova

World Maritime University Dissertations

No abstract provided.

Port State Control In The Philippines : Addressing Challenges And Recommending Pathways For Enhancing Qualification And Operational Effectiveness, Kethlynn Mae Nadal

World Maritime University Dissertations

No abstract provided.

Occupational Safety In Fishing Vessels : A Comparative Analysis Of Namibia, South Africa And Mozambique In The Sadc Region, Fiina Ndakulilwa Twiihaleni Shaanika

World Maritime University Dissertations

No abstract provided.

Assessing Marpol Annex V Port Reception Facilities Of The National Port Of Liberia (Freeport Of Monrovia), Barbara Wade Cummings

World Maritime University Dissertations

No abstract provided.

Enhancing Urban Energy Modeling: A Case Study Of Data Acquisition, Enrichment, And Evaluation In Berlin, Felix Rehmann, Martín Mosteiro-Romero, Clayton Miller, Rita Streblow

Research Collection College of Integrative Studies

Urban Building Energy Modeling (UBEM) has become a critical tool for developing local heating and cooling plans, as required by the European Union. Despite growing interest, the reproducibility and reliability of UBEM studies remain limited due to data scarcity and workflow complexity. This paper presents a comprehensive framework to evaluate the data pipeline in UBEM, with a particular focus on data acquisition, enrichment, simulation, calibration, and information application. The approach applies three distinct UBEM workflows (CityEnergyAnalyst, DistrictGenerator, and SimStadt) to the Mierendorffinsel district in Berlin, Germany. We compare the based on quantitative performance metrics and qualitative framework criteria. The results …

Experimental Investigation: Performance Of Ranque–Hilsch Vortex Tubes Under Various Surface Boundary Conditions, Ahmad Al-Najjar

Theses

The Ranque–Hilsch vortex tube (RHVT) is a passive thermofluid device that splits compressed gas into simultaneous cold and hot streams through strong swirling flow inside a slender tube, without moving parts. This study experimentally examines how external boundary conditions applied to the tube wall influence RHVT performance. Three wall conditions were imposed: (i) externally cooled (cooling), (ii) externally heated (heating), and (iii) adiabatic (insulated). Tests were conducted with air over an inlet pressure range of 2–6 bar. The primary objective was to understand the extent to which wall thermal condition modifies temperature separation and energy efficiency. Performance was quantified using …

Microstructural And Mechanical Characterization Of Aa6082 /Sic/Al2o3 Hybrid Nano Composite Fabricated By Ultrasonic Assisted Stir Casting, Anasmon Koderi Valappil

Theses

The utilization of aluminium alloys has increased rapidly in past decades due to the increasing demand for lightweight and high-performance materials. Among the popular aluminium alloys, AA6082 is widely favoured for its excellent combination of strength, corrosion resistance, and machinability. Most previous work, however, has concentrated on either on micro scale reinforcement or on single ceramic particles, leaving very few experimental studies on the use of hybrid nano reinforcement in AA6082. Therefore, to further enhance its mechanical properties without compromising its inherent advantages, hybrid metal matrix composites were developed using various nano particulates as reinforcements. In this current study, AA6082-based …

Core-Scale Study Of Miscible Co2 Foam–Oil Interactions, Kuvonchbek Abdirakhmonov

Theses

Foam is currently the most effective means for gas mobility control in a variety of geo-energy applications, including enhanced oil recovery (EOR), carbon capture, utilization and storage (CCUS), and aquifer/soil remediation. This study investigates the mobility control of miscible CO₂ foam in the presence of oil.

The primary objective is to quantify the impact of oil on CO₂ foam behavior under miscible conditions, specifically examining foam stability, strength, and flow regimes as influenced by oil composition and reservoir permeability. While most oils destabilize foam, few studies explore the coarsening mechanisms of CO₂ foam in the presence of miscible oils, which …

Different Brain Network Connectomic Relationships Subserve Hand Dexterity During Task Versus Resting States In People With Brain Tumors, Timothy F. Boerger, Leon Taquet, Kaitlin Goetschel, Sarah Young, Jennifer Connelly, Jeffrey R. Binder, Brian Schmit, Max O. Krucoff

Biomedical Engineering Faculty Research and Publications

Purpose

The purpose of this study was to explore different brain network connectomic relationships subserving hand dexterity in patients with contrast-enhancing brain tumors during task and resting states.

Method

We measured hand dexterity, resting state functional connectivity, and task-based functional connectivity in 21 participants with newly diagnosed brain tumors. Hand dexterity was measured using the 9-hole peg test (9HPT), and patient-reported outcomes were assessed with the Duroz Hand Index (DHI).

Findings

We discovered the following: (1) The inability to complete dexterous tasks is most associated with low somatomotor-basal ganglia network connectivity during rest but high somatomotor-basal ganglia network connectivity during …