Engineering Commons^™

The Corrosion Behavior Of Aisi 304l Stainless Steel In Simulated Concrete Pore Solution. And A New Marketing Plan For Stainless Steel Rebars., Kenny Aronson

Williams Honors College, Honors Research Projects

The purpose of this project is to study the corrosion behavior of AISI 304L stainless steel, and to present the results for a new marketing strategy for a steel rebar manufacturer. This experiment involved the usage of cyclic potentiodynamic polarization tests to investigate the effect of chlorides on the pitting corrosion behavior of AISI 304L stainless steel in a simulated concrete pore solution with 3.5 wt.% chlorides. The results of this experiment showed that the chlorides caused a large increase in the corrosion current density of AISI 304L stainless steel indicating increased susceptibility to general corrosion and pitting corrosion. The …

Water Condensation Collection For Disaster Relief, Tyler Gaydosh

Williams Honors College, Honors Research Projects

Numerous populations experience sudden, unexpected circumstances where drinking water supply may be compromised. Current leading response strategies include the delivery of disposable water bottles, a simple and effective way of meeting the demand of fresh drinking water. The lack of reusability results in problems with waste and cost. Any response to provide drinking water to a population in these circumstances must consider a prolonged crisis and these limitations: minimal delivery opportunities, power supply, and waste management (e.g., aftereffects of Hurricane Maria in Puerto Rico). A review of alternatives for water collection was done to determine a viable collection method that …

Zips Electric - Cooling System, Guan-Bok Kwok

Williams Honors College, Honors Research Projects

I am working with Zips Electric Racing to design a new cooling system for the ZER-20 car. The new cooling system will be more efficient and effective than the current design. We will investigate lighter materials with better thermal conductivity. Flow rate will also be optimized to meet the system’s needs. Also calculations and testing will be completed to determine if a fan is necessary. To adapt to the new proposed chassis, it is likely that the radiator must be mounted outside of the frame. If this is necessary, we will also design composite side pods to conceal and direct …

Rocket Motor Nozzle, Corey Hillegass

Williams Honors College, Honors Research Projects

For this honors research and senior design project, the authors will research, analyze, and manufacture a rocket motor nozzle for the Akronauts rocket design team. This research and design project will improve how the rocket design team will decide and manufacture nozzles going forward. The impact of this improvement allows the rocket design team to take steps toward being self-sustaining by manufacturing student designed parts as opposed to commercially bought parts. This will not only be successful in increasing student impact on future designs, but also provides a technical challenge for the authors and will present as an impressive feat …

I/O Master, Aaron Dubler, Corey Dye, Cameron Sinko, Ian Glen, Nikolaus Untch

Williams Honors College, Honors Research Projects

The I/O Master is an engineering tool designed to let users quickly and efficiently use their computer to interface with embedded devices and sensors. Using a general purpose design, the goal is to make it possible to implement any digital protocol on the I/O Master. With the use of onboard level shifting, differential communication components, peripheral DMA through GPIO and a USB 2.0 High Speed computer interface, the I/O Master is able to implement such a general purpose design with initial implementation of five protocols to verify the design's capabilities. The implementation of a computer-based GUI and underlying framework allows …

Shock Wave And Boundary Layer Interaction, Blake Keuchel, Lauren Andrews, Corryn Rahe

Williams Honors College, Honors Research Projects

Air entering the engine of a supersonic aircraft must be slowed to subsonic speeds for the engine to perform properly and not become significantly damaged over time. Diffusers are designed to create a shockwave to slow down air to subsonic speeds before the air enters the engine. This project will focus on the numerical analysis and design of diffuser geometries for supersonic aircraft engines. The main objective is to evaluate supersonic flow over different geometries, specifically the interaction between shock waves and boundary layer, and to minimize the amount of drag created by different diffuser geometries to optimize the efficiency …

Filtration Apparatus Design For Oil-Water Separation Using Membranes And Sponges, Alec Jerger

Williams Honors College, Honors Research Projects

It can be difficult to separate water and oil emulsions through traditional filtration. Therefore, investigations of filtering using thermo-responsive (TR) polymers, in this case poly(vinyl methyl ether) (PVME), was conducted. It’s hypothesized that below its lower critical solution temperature (LCST), PVME has an affinity for water while oil substances do not. Above the LCST the opposite will be true. To verify this hypothesis, iterations of filtration designs were created to provide optimum control over the parameters to measure flow. The final optimized experimental apparatus was a Chromaflex glass column which was air tight and controlled all parameters besides fluid flow. …

Vehicle Operator Attention Monitor, Matthew Krispinsky, Matt Marsek, Matthew Mayfield, Brian Call

Williams Honors College, Honors Research Projects

Motor vehicle operators’ attention levels can be monitored to improve driver safety. By recording and analyzing the drivers eye gaze, hand position, vehicle speed and engine rpm the driver’s attention can be determined. A Raspberry Pi will be the main processing unit. Data will be pulled and analyzed from the OBD-II port on vehicle speed and engine rpm. The system will be powered from a 12V, 4A pin on the OBD-II port connected to the car battery. A webcam will be used to track the pupil location and determine when the driver is looking at the road. A battery powered …

Formula Electric Sae Frame, David Streen, David Kinion, Dylan Ramey

Williams Honors College, Honors Research Projects

The project is for the FSAE Zips Racing Electric Team. The last race car made by the Zips Racing Electric Team has a large potential for optimization. We plan to redesign the frame from the ground up in an effort to reduce weight and increase the performance potential while meeting all FSAE rules and packaging constraints.

Formula Electric is an event in which teams from colleges around the world compete in various events including autocross, endurance and many others with an electrically driven car.

This project will involve the design, analysis, and fabrication of a steel tube space frame for …

Zips Electric Racing Suspension Design, Madison Hughes, Christopher Thompson, Erikah Jackson, Anna Signorino

Williams Honors College, Honors Research Projects

I am working with three others on the suspension and steering sybsystems for the Zips Electric Racing design team at The University of Akron. We are improving upon last year's design to help create an optimized vehicle. As part of this project, we take part in weekly design reviews and team meetings, model parts in Solidworks, and perform simulations and FEA using MATLAB/SIMULINK, Solidworks, and Optimum Kinematics.

E-Z Door: Hands-Free Front Door Unlocking And Opening Mechanism, Caleb Dyck

Williams Honors College, Honors Research Projects

The E-Z Door Senior Design project is a project with the aim of designing a hands-free system to unlock and open the front door of a home using two-factor security authentication.

The main goal of this project is to help people who may have physical limitations to be able to take advantage of recent technology, making it significantly easier to enter their homes.

Comparision Of Fillet-Welded Base Plate Fatigue Design For Highway Support Structures With Laboratory Research Tests, William Shea

Williams Honors College, Honors Research Projects

There are many types of vertical structures along highways that serve unique purposes. These structures include traffic signs for directing, warning, or regulating traffic, luminaires for distributing and directing light, traffic signals supporting equipment such as traffic lights, and combination structures including any combination of the aforementioned structures. Highway support structures are typically fabricated from steel or aluminum and are designed to the guidelines and specifications of the AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals. The structures are connected to a foundation by anchor bolts through a welded base plate. Often a cause …

Visual Music Assistant, David Klett

Williams Honors College, Honors Research Projects

The Visual Music Assistant system provides an augmented reality experience via Microsoft's HoloLens device. The application we will develop will provide an intuitive user interface to learn how to play on a keyboard (88-key piano).

Table Top Dome Tester, Travis Bernard, Sarah Kassinger, Amanda O'Reilly, Scott Salerno

Williams Honors College, Honors Research Projects

The Erichsen Cupping Test was used as a basis to design a dome tester. The intention of a dome tester is to test sheet metal material properties in all directions. This was done by clamping a piece of sheet metal and using a piston and hydraulic press to punch through the material. The force used to punch the material and the height of the deforming material can be gathered and the sheet metal properties can then be calculated. At the end of the project the team was able to successfully design and manufacture a hydraulic dome tester. However, due to …

Zips Precious Plastics: Plastic Extruder, Patrick Cole

Williams Honors College, Honors Research Projects

This project's goal was to design and build an affordable desktop filament extruder that can precisely and consistently extrude filament to a certain tolerance acceptable for 3D printers using wasted printing material. The group is partnering with an on campus organization focusing on engineering applications for sustainable futures. Zips Precious Plastics is a student run design group that intends to bring an innovation space on campus to help educate students about the importance of a closed looped system within plastic manufacturing.

Reconsideration Of Energy Balance In Jiles–Atherton Model For Accurate Prediction Of B–H Trajectories In Ferrites, Harshita Singh, Scott D. Sudhoff

Department of Electrical and Computer Engineering Faculty Publications

In this article, the energy balance equation in the original Jiles-Atherton model is revisited. In particular, the assumption that the energy stored in a lossy material is equal to that stored in a lossless material is removed. This modification results in more accurate prediction of B -H trajectories. A new approach to characterize material parameters based on resonant response is also set forth. Extensive experimental validation is provided and model parameters for several common materials are given.

Non-Linear Non-Iterative Transient Inverse Conjugate Heat Transfer Method Applied To Microelectronics, David Gonzalez Cuadrado, Amy Marconnet, Guillermo Paniagua

CTRC Research Publications

Solving for temperature profiles given boundary conditions, geometry, and material properties is rela- tively straightforward given the wealth of analytical and computational techniques available. However, experimentally we often measure temperatures and seek to understand unknown boundary conditions or material properties. This problem is generally ill-posed. Thus, to get the value of these input param- eters, we use inverse methods: knowing the output of the system ( i.e. , temperature), we can compute the value of the unknown parameters ( e.g. , thermal conductivity or heat fluxes). In microelectronics, the location and magnitude of the boundary conditions including local heat generation …

Experimental Analyses Of Different Control Strategies Of An R-410a Split-System Heat Pump By Employing A Turbomachinery Expansion Recovery Device, Riley Barta, Davide Ziviani, Eckhard A. Groll

School of Mechanical Engineering Faculty Publications

With increasing need for energy efficient vapor-compression cycles (VCCs), researchers have investigated different aspects of such systems to increase performance. The goal of this research is to experimentally investigate the design and control of a turbomachine expander to recover work and control the VCC. An R-410A split-system heat pump experimental setup has been utilized to compare the performance and control capabilities of a variable nozzle and a fixed nozzle with phase separation combined with evaporator bypass flow metering. A theoretical analysis on the benefit of the expander in heat pumps motivated heat pump operation in cooling mode. The variable nozzle …

The Influence Of Connecting Funds Of Knowledge To Beliefs About Performance, Classroom Belonging, Dina Verdín, Jessica Smith, Juan Lucena

School of Engineering Education Graduate Student Series

First-generation college students in engineering accumulate bodies of knowledge through their working-class families. In our ethnographic data of first-generation college students, we identified tinkering knowledge from home and from work, perspective taking, mediational ability, and connecting experiences as knowledge sources brought to engineering. The purpose of this paper was to understand how first-generation college students’ accumulated bodies of knowledge (i.e., funds of knowledge) support their beliefs about performing well in engineering coursework, feeling a sense of belonging in the classroom, and certainty of graduating. Data for this study came from a survey administered in the Fall of 2018 from ten …

Integrated Dentistry Face Shield, Noah Glass

Williams Honors College, Honors Research Projects

Currently, the United States and the entire world is experiencing a global pandemic that has drastically changed the way we go about our everyday lives. Dr. Pavlik, a local dentist is one such person who has had to alter his normal dentistry routine to one of extreme caution while working on patients. His day to day job puts him at a high risk of being exposed to Covid-19 by actively working in patients’ mouths at proximity. Dr. Pavlik’s current dentistry equipment is lackluster in its compatibility with his safety equipment. To help minimize exposure to Covid-19 for Dr. Pavlik and …

Parylene Based Flexible Multifunctional Biomedical Probes And Their Applications, Zhiguo Zhao

Wayne State University Dissertations

MEMS (Micro Electro Mechanical System) based flexible devices have been studied for decades, and they are rapidly being incorporated into modern society in various forms such as flexible electronics and wearable devices. Especially in neuroscience, flexible interfaces provide tremendous possibilities and opportunities to produce reliable, scalable and biocompatible instruments for better exploring neurotransmission and neurological disorders. Of all the types of biomedical instruments such as electroencephalography (EEG) and electrocorticography (ECoG), MEMS-based needle-shape probes have been actively studied in recent years due to their better spatial resolution, selectivity, and sensitivity in chronical invasive physiology monitoring. In order to address the inherent …

Advanced Electrodes And Electrolytes For Long-Lived And High-Performance Lithium-Sulfur Batteries, Deepesh Gopalakrishnan

Wayne State University Dissertations

ABSTRACT

ADVANCED ELECTRODES AND ELECTROLYTES FOR LONG-LIVED AND HIGH-PERFORMANCE LITHIUM-SULFUR BATTERIES

by

DEEPESH GOPALAKRISHNAN

August 2020

Advisor: Dr. Leela Mohana Reddy Arava

Major: Mechanical Engineering

Degree: Doctor of Philosophy

Lithium – Sulfur (Li-S) batteries have received much attention and considered as a promising candidate for next generation energy storage devices because of their high theoretical energy density (≈2600 Wh kg‒1) and environmental friendliness. However, the uncontrollable growth of lithium dendrites in the lithium metal anode and the fatal effect of polysulfide shuttle hinder their practical applications. The formation of dendrites during repeated Li plating/stripping processes results in: reduced Li availability …

Enabling 3d Printing Technologies For Artificial Compound Eye System And Penetrating Neural Probes, Boshen Zhang

Wayne State University Dissertations

3D printing has become a useful and transformative method and has applications in many different fields, including organ printing, aerospace applications, and medical devices. With higher resolution, faster production speed, and more design flexibility, 3D printing technologies can lead to more novel devices and systems. In this research, two new techniques have been developed to enable 3D printing technologies for artificial compound eye system and penetrating glassy carbon neural electrode array.

This work focuses on developing new applications based on the SLA 3D printing process, which uses the liquid resin to create a solid 3D structure. The limitation of SLA …

Study Of Grain Growth In Single-Phase Polycrystals, Pawan Vedanti

Wayne State University Dissertations

Materials with random microstructure are characterized by additional thermodynamic parameters, entropy and temperature of microstructure. It has been argued that there is one more law of thermodynamics: entropy of microstructure decays in isolated systems. This assertion has been checked experimentally for the process of grain growth which showed that entropy of grain structure decays indeed as expected. The equation of state for microstructure entropy has also been studied. In general, entropy of grain microstructure is expected to be a function of grain structure energy and the average grain size. Our experiments suggest that in fact, the equation of state degenerates …

Error Correction For Automotive Telematics Systems, Samer Zakhem

Wayne State University Dissertations

One benefit of data communication over the voice channel of the cellular network is to reliably transmit real-time high priority data in case of life critical situations. An important implementation of this use-case is the pan-European eCall automotive standard, which has already been deployed since 2018. This is the first international standard for mobile emergency call that was adopted by multiple regions in Europe and the world. Other countries in the world are currently working on deploying a similar emergency communication system, such as in Russia and China. Moreover, many experiments and road tests are conducted yearly to validate and …

The Covid-19 Pandemic And Transportation Engineering, Chris Hendrickson,, Laurence Rilett

Department of Civil and Environmental Engineering: Faculty Publications

The COVID-19 pandemic has been an enormous global disruption with immense economic, environmental, and social impacts throughout the world. Only world wars and the flu pandemic of 1918 are comparable in the wide range of consequences, including fatalities, over a relatively short period of time. Unfortunately, we can expect other major disruptions to occur in the future. In this editorial, we intend to discern some lessons for the transportation engineering profession that can be learned from the current catastrophe that can help us prepare for future disruptions. We will ignore nontransportation aspects of the pandemic such as the development of …

Experimental Study On The Characteristics Of Formation And Dissociation Of Co2 Hydrates In Porous Media, Amin Hosseini Zadeh, Ijung Kim, Seunghee Kim

Department of Civil and Environmental Engineering: Faculty Publications

Geologic carbon sequestration (GCS) has pursued as a feasible strategy to store the large amount of CO₂ to curb its emission to the atmosphere in an effort to mitigate the greenhouse effects. CO₂ hydrate, which can form when the pressure and temperature satisfy its stability condition, can provide a self-trapping mechanism for an offshore CO₂ geologic storage. For example, direct sequestration of CO₂ in the form of hydrate cystals an be achieved in the storage zone an potentially provide a secondary caprock. These application, however, require a thorough understanding of the formation and dissociation of CO …

Computational Modeling Of Shock Wave Propagation In A Layered Composites, Nicholas Ryan Scott

Electronic Theses and Dissertations

Modeling and simulation of a metallic flyer plate impacting a woven glass-fiber reinforced plastic (GRP) plate at different velocities was performed using the ALE3D© finite element code. The one-dimensional strain-based shock wave propagation experimental data in terms of time history of GRP’s back surface material particle velocity, available in open literature [1], were utilized in the calibration of a continuum damage mechanics (CDM) model. The experimental data included D7 Tool Steel and 7075-T6 aluminum flyer plates and two different GRP thicknesses (6.8 mm or 13.6 mm) with varying impact velocities in the range of about 8.5 m/s to 418 m/s. …

An Experiential Online Training Approach For Underrepresented Engineering And Technology Students, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

Workforce pipelines are essential to sustain a productive workforce in an increasingly competitive, high-tech environment. Advanced automation, sensors, materials and data analytics will increase the need for highly skilled workers in the manufacturing (and manufactured construction) sector. Attracting and developing the next-generation workforce is not without its challenges; however, students are often deficient in technical skills and generally have negative perceptions about manufacturing and construction. As a result, new education and training models have been developed to provide instruction at all levels of the educational system, with a focus on both traditional students and non-traditional students, including ethnic minorities, women, …

Viability Analysis Of Tralee’S District Heating System, Ed O’Connor

Theses

At present a large proportion of domestic and commercial heating systems in Ireland are fossil fuel based. Decarbonisation of Irelands heating system would mean a shift away from traditional fossil fuels, and a step towards more renewable and sustainable thermal energy systems. This thesis outlines a viability analysis of one of the options available to assist in the achievement of Ireland’s thermal energy goals and carbon emissions targets. The option considered in this proposal is the development of a wood chip fuelled District Heating System (DHS) to cater for the thermal needs of the town of Tralee. Several alternatives DHS …