Engineering Commons^™

Structural And Environmental Impact Of New-Generation Wide-Base Tires In New Brunswick, Canada, Izak M. Said, Jaime Hernandez, Seunggu Kang, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

The loading and environmental impacts of new-generation wide-base tires (NG-WBT) and dual tire assemblies (DTA) on typical asphalt concrete (AC) pavement sections of New Brunswick, Canada were evaluated using finite element method (FEM) analysis and life-cycle assessment. The impact of steering wheel was not considered in this study. The analysis considered realistic material models and loading conditions (i.e. AC viscoelastic characteristics and measured three-dimensional nonuniform tire–pavement contact loads). Predicted critical pavement responses were used in transfer functions to determine potential pavement damage. The NG-WBT loading resulted in greater critical pavement responses compared to that of DTA, especially near the surface …

Liana Abundance And Diversity Increase With Rainfall Seasonality Along A Precipitation Gradient In Panama, Anthony J. Parolari, Kassandra Paul, Aaron H. Griffing, Richard Condit, Ronaldo Perez, Salomón Aguilar, Stefan A. Schnitzer

Civil and Environmental Engineering Faculty Research and Publications

In tropical regions, rainfall gradients often explain the abundance and distribution of plant species. For example, many tree and liana species adapted to seasonal drought are more abundant and diverse in seasonally-dry forests, characterized by long periods of seasonal water deficit. Mean annual precipitation (MAP) is commonly used to explain plant distributions across climate gradients. However, the relationship between MAP and plant distribution is often weak, raising the question of whether other seasonal precipitation patterns better explain plant distributions in seasonally-dry forests. In this study, we examine the relationship between liana abundance and multiple metrics of seasonal and annual rainfall …

Object Identification In Radar Imaging Via The Reciprocity Gap Method, Matthew Charnley, Aihua W. Wood

Faculty Publications

In this paper, we present an experimental method for locating and identifying objects in radar imaging, specifically problems that could arise in physical situations. The data for the forward problem are generated using a discretization of the Lippmann‐Schwinger equation, and the inverse problem of object location is solved using the reciprocity gap approach to the linear sampling method. The main new development in this paper is an exploration of determining the permittivity of the object from the back‐scattered data, utilizing another discretization of the Lippmann‐Schwinger equation.
Abstract © AGU.

Geotechnical Engineering: Particle Size Distribution Of Layered Glacial Lake Columbia And Ice Age Flood Deposits In Latah Valley, Spokane, Wa, Aaron Cleveland, Kassie Allen

2020 Symposium Posters

We collected samples from the Latah Valley in Spokane, WA, of Missoula Flood deposits interbedded with Glacial Lake Columbia Sediments. We conducted tests on these soils according to ASTM standards. We performed Specific Gravity tests according to ASTM D854, and determined particle size distribution for these soils by conducting sieve and hydrometer analyses according to ASTM D422. We then plotted these data to create particle size distribution curves. Specific Gravities for the all of the samples collected range from 2.36 to 2.67. The flood deposits are dominated by coarse sand and gravel and the Glacial Lake Columbia deposits are dominated …

Observing P300 Amplitudes In Multiple Sensory Channels Using Cognitive Probing, Cody Lee Wintermute

Browse all Theses and Dissertations

High cognitive workload occurs when excessive working memory resources have been deployed to resolve sensory and cognitive processing, resulting in decremented task performance. The P300 event-related potential (ERP) component has shown sensitivity to cognitive load, and it was hypothesized that an attenuated P300 amplitude could be indicative of high cognitive load. We tested this hypothesis by having eight participants complete two continual performance tasks at increasing workload levels while simultaneously performing an oddball task, evoking P300 ERPs in either the auditory or tactile sensory channel. In our experiment, electroencephalographic recordings were collected over the parietal region to observe the P300 …

Improving Pain Management In Patients With Sickle Cell Disease Using Machine Learning Techniques, Fan Yang

Browse all Theses and Dissertations

Sickle cell disease (SCD) is an inherited red blood cell disorder that can cause a multitude of complications throughout a patient's life. Pain is the most common complication and a significant cause of morbidity. Since pain is a highly subjective experience, both medical providers and patients express difficulty in determining ideal treatment and management strategies for pain. Therefore, the development of objective pain assessment and pain forecasting methods is critical to pain management in SCD. On the other hand, the rapidly increasing use of mobile health (mHealth) technology and wearable devices gives the ability to build a remote health intervention …

Enabling Static Program Analysis Using A Graph Database, Jialun Liu

Browse all Theses and Dissertations

This thesis presents the design, the implementation, and the evaluation of a database-oriented static program analysis engine for the PHP programming language. This engine analyzes PHP programs by representing their semantics using a graph-based data structure, which will be subsequently stored into a graph database. Such scheme will fundamentally facilitate various program analysis tasks such as static taint analysis, visualization, and data mining. Specifically, these complex program analysis tasks can now be translated into built-in declarative graph database operations with rich features. Our engine fundamentally differs from other existing static program analysis systems that mainly leverage intermediate representation (IRs) to …

Renca Macrobeads Inhibit Tumor Cell Growth Via Egfr Activation And Regulation Of Mef2 Isoform Expression, Prithy Caroline Martis

Browse all Theses and Dissertations

Tumors are heterogeneous systems, whose growth is influenced by intrinsic properties of malignant cells, external systemic factors (i.e. immune, neural, endocrine, etc.), and the dynamic interactions between tumor cells and their microenvironment. Given the inherent complexity of cancers, combined with the continual evolution of tumors and the development of treatment resistance, a precision medicine approach may not provide an optimal clinical response. Exploring a new paradigm that focuses on regulating cancer as a system may not only control tumor progression but also address the extraordinary challenges of tumor heterogeneity and disease recurrence in order to improve clinical outcomes. As a …

The Effect Of Thermal History On The Atomic Structure Andmechanical Properties Of Amorphous Alloys, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

The influence of thermal processing on the potential energy, atomic structure, and mechanical properties of metallic glasses is examined using molecular dynamics simulations. We study the three-dimensional binary mixture, which was first relaxed near the glass transition temperature and zero pressure, and then rapidly cooled deep into the glass phase. It was found that glasses annealed at higher temperatures are relocated to higher energy states and their average glass structure remains more disordered, as reflected in the height of the first two peaks in the pair distribution function. The results of mechanical testing demonstrate that both the shear modulus and …

Computational Fluid Dynamics Of Thermally Double Couple Reactor For Hydrogen Production Through Glycerol Reforming Using Heat From Methanol Production From Carbon Dioxide, Sasinun Thirabunjongcharoen

Chulalongkorn University Theses and Dissertations (Chula ETD)

Thermally double coupled reactor (TDCR) consisted of two concentric channels: 1) an inner tube to which CO₂ and H2 were fed as reactants for exothermic MS with Cu/ZnO/Al2O3 at 220°C and 50 bar, and 2) an outer annulus channel through which glycerol and steam were supplied for endothermic APGR with Pt/Al2O3 at 220˚C and 20 bar. The TDCR could operate without external heat supply when two reactions were coupled. A computational fluid dynamic (CFD) model was established to study this TDCR. Heat transfer from the exothermic channel to the endothermic channel helped increasing glycerol conversion when compared with a single …

Recovery Of Ethyl Lactate From Washing Solution Originating From Drill Cuttings Treatment By Adsorption Process, Theary Peng Orng

Chulalongkorn University Theses and Dissertations (Chula ETD)

The purpose of this study was to recover the washing solutions generated from drill cuttings washing process using an adsorption technology. Ethyl lactate (EL) was selected as an extracting agent for drill cuttings washing throughout the work. Various washing parameters including liquid-to-solid (L/S) ratio, washing time, mixing speed, rinse-to-solid (R/S) ratio, and rinsing time were studied with the aid of response surface methodology. Once the optimal washing conditions were obtained, the recovery of washing solutions, i.e., spent EL and rinsed water using the commercial granular activated carbon (GAC) and kapok fiber (KF) were investigated. Finally, the adsorbent modification and validation …

Opportunities In Manufacturing Of Advanced Materials For Second Career-Seeking Students, Oleksandr Kravchenko, Konstantin Cigularov, Tancy J. Vandecar-Burdin

Mechanical & Aerospace Engineering Faculty Publications

Many non-traditional students face similar challenges including lack of institutional support network, challenges to connecting with other students on campus, which may negatively affect degree persistence rates. The lack of financial support has been acknowledged nationwide as a barrier for STEM students including second-career seeking (SCS) students. The term career is defined as an occupation or course, which relates to a range of aspects of an individual’s life, learning and work and is undertaken for a significant period of a person’s life and with opportunities for progress. We target academically talented SCS students at Old Dominion University (ODU) with demonstrated …

Test 2218: Kubota M8-201, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2217: Kubota M8-181, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2220: John Deere 7r 310, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2222: John Deere 8r 340, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2226: John Deere 8rt 410, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2225: John Deere 8rt 370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2227: John Deere 8rx 370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1195: John Deere 6155m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1194: John Deere 6145m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1192: John Deere 6120m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1191: John Deere 6110m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Modeling Of Scrap Dissolution In Molten Iron For The Case Of Heat Transfer-Controlled Process By Different Approaches And Comparison Of Their Accuracies, Ajay Kumar Shukla, Brahma Deo, D. G.C. Robertson

Materials Science and Engineering Faculty Research & Creative Works

Dissolution of steel scrap in molten iron is studied by using analytical as well as numerical approaches for the case of a heat transfer-controlled process. The approaches used are Green's function approach, quasi-static approach, integral profile method (IPM) (with parabolic profile), and finite difference methods (FDM). Application of FDM explicit and FDM implicit with fixed grid and variable grid is described. Accuracy of all the approaches is compared in terms of total dissolution time evaluated from overall heat balance criterion. The selection rule of time step and deciding the suitable approach for achieving minimum error for different operating conditions, represented …

Modal Analysis As Non-Destructive Testing Technique For Additively Manufactured 304l Stainless Steel Parts, Tristan N. Cullom

Masters Theses

“Non-Destructive Testing (NDT) methods for Additively Manufactured (AM) parts is an ongoing field of research in the additive community due to its ability to determine if a part can be deemed viable for field usage. This study presents modal analysis as a NDT method for AM parts. For production builds that have multiple copies of the same part, a correcting technique can be used such that the frequencies of the parts under test can be reliably compared against each other, which saves both time and money compared to other traditional NDT methods. This study was able to develop a novel …

3d Printing Reinforced Concrete Structures, Bryce Tyler Tafolla

Masters Theses

"This study aims to investigate a 3D printing method to directly incorporate continuous reinforcement into concrete structures. The ability to design and produce complex structures with optimized topographical configuration can be used to reduce potential material waste while maintaining the required structural strength. Furthermore, the ability to actively incorporate reinforcement into printed members substantially reduces potential labor requirements and eliminates the need to set up formwork.

The study began its initial approach with a manual extrusion process containing reinforcement to observe the necessary constraints required to achieve a printing system with this functionality. The second stage of development was designing …

Data Entry Voice Assistant For Healthcare Providers, Sajad Hussain M Alhamada

EWU Masters Thesis Collection

No abstract provided.

Modification Of The Optical Response Of Alpha Quartz Via The Deposition Of Gold Nanoparticles In Etched Ion Tracks, Maria C. Garcia Toro

Doctoral Dissertations

”This study addresses the experimental methods used to develop and characterize plasmonic devices capable of modifying the optical response of alpha quartz via the deposition of gold nanoparticles in etched ion tracks. In the first part of the research, the microstructural characterization of latent and etched ion tracks produced in alpha quartz (α-SiO₂) is presented. Single crystals of α-SiO₂ were irradiated with two highly energetic ions to different nominal fluences. As expected, the morphology of the resulting ion tracks depends on the energy of the incident ion and their stopping powers within the target material. Subsequent chemical …

Time- And Space-Dependent Uncertainty Analysis And Its Application In Lunar Plasma Environment Modeling, Xinpeng Wei

Doctoral Dissertations

”During an engineering system design, engineers usually encounter uncertainties that ubiquitously exist, such as material properties, dimensions of components, and random loads. Some of these parameters do not change with time or space and hence are time- and space-independent. However, in many engineering applications, the more general time- and space-dependent uncertainty is frequently encountered. Consequently, the system exhibits random time- and space-dependent behaviors, which may result in a higher probability of failure, lower average lifetime, and/or worse robustness. Therefore, it is critical to quantify uncertainty and predict how the system behaves under time- and space- dependent uncertainty. The objective of …

Soil-Water-Energy Nexus Of Green Roofs, Katherine Ann Bartels

Masters Theses

"As the urban landscape continues to sprawl into previously undeveloped land to accommodate population growth, the need to design cities that effectively manage urban stormwater is imperative for a sustainable future. Green roofs use rain-harvesting techniques to reduce urban stormwater discharge while simultaneously providing traditional roof services as well as several ecosystem services. However, green roof media design varies greatly among commercial applications, and little guidance is available to engineers when selecting the media for prospective green roofs. Efforts to maximize stormwater retention and enhance urban heat island mitigation capabilities of green roofs while concurrently reducing nutrient loading were examined …