Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 62221 - 62250 of 198215

Full-Text Articles in Engineering

Optimal Svc Allocation In Power Systems Using Lightning Attachment Procedureoptimization, Ayman Awad, Salah Kamel, Heba Youssef, Francisco Jurado Jan 2020

Optimal Svc Allocation In Power Systems Using Lightning Attachment Procedureoptimization, Ayman Awad, Salah Kamel, Heba Youssef, Francisco Jurado

Turkish Journal of Electrical Engineering and Computer Sciences

Flexible AC transmission systems (FACTS) technology is widely adopted and utilized to maintain the performance of power systems. However, the improvements of power system performance achieved by FACTS devices depend on the right sizing and allocation of such devices. For technical and economic considerations, a FACTS device's location and size should be selected very carefully in order to maximize its benefits to the power system. In this paper, the sizing and location of a static VAR compensator (SVC) are optimally determined using a new optimization technique called lightning attachment procedure optimization (LAPO). The optimal allocation of the SVC is determined …

Go to article

Asymmetric Slope Compensation For Digital Hybrid Current Mode Control Of Athree-Level Flying Capacitor Buck Converter, Abdulkeri̇m Uğur, Murat Yilmaz Jan 2020

Asymmetric Slope Compensation For Digital Hybrid Current Mode Control Of Athree-Level Flying Capacitor Buck Converter, Abdulkeri̇m Uğur, Murat Yilmaz

Turkish Journal of Electrical Engineering and Computer Sciences

The three-level flying capacitor (3LFC) buck converter has the potential to provide better efficiency and higher power density as compared to the traditional buck converter. However, due to the flying capacitor?s instability issues, control is challenging. In this paper, the digital hybrid current mode (DHCM) control method, which combines the average and peak current mode control techniques, is modified and implemented to a 3LFC buck converter. For flying capacitor (FC) voltage balancing, a novel asymmetric slope compensation (ASC) technique is presented. The proposed ASC technique achieves FC voltage balancing by adjusting the slope compensation of the two switching pairs asymmetrically, …

Go to article

Fiber Optic Chemical Sensors For Water Testing By Using Fiber Loop Ringdown Spectroscopy Technique, Mali̇k Kaya Jan 2020

Fiber Optic Chemical Sensors For Water Testing By Using Fiber Loop Ringdown Spectroscopy Technique, Mali̇k Kaya

Turkish Journal of Electrical Engineering and Computer Sciences

Real-time response, low cost, sensitive and easy setup fiber optic chemical sensors were fabricated by etching a part of single mode fiber in hydrofluoric (HF) acid solution and tested in different water samples such as tap water, DI water, salty and sugar water with different concentrations to record ringdown time (RDT) differences between media due to refractive index differences by employing the fiber loop ringdown (FLRD) spectroscopy technique. Baseline stability of 0.63 % and the minimum detectable RDT of $5.05$ $\mu$s for this kind of fiber optic chemical sensors were obtained. Fabricated sensors were coated with N,N-Diethyl-p-phenylenediamine for the first …

Go to article

Unsteady Aerodynamic Analysis Of Wind Harvesting Aircraft, Judd Mehr, Eduardo Alvarez, Andrew Ning Jan 2020

Unsteady Aerodynamic Analysis Of Wind Harvesting Aircraft, Judd Mehr, Eduardo Alvarez, Andrew Ning

Faculty Publications

Airborne Wind Energy (AWE) technology aspires to provide increased options for wind energy harvesting. This includes increased feasibility for temporary and remote installations, as well as the ability to operate at wind speeds both lower and higher than traditional turbines. Additionally, the hope is to be able to produce these extensions of wind energy technology at a lower cost than conventional technologies. As AWE technology is still in its infancy, however, there is very little published information concerning the aerodynamic details of the technology. We have created a set of aerodynamic analysis tools which we apply to wind harvesting aircraft, …

Go to article

Dynamic Loading Experimentation And Surface Imaging Of Pressure Vessel Loadcell Fractures, Austin T. Sumner Jan 2020

Dynamic Loading Experimentation And Surface Imaging Of Pressure Vessel Loadcell Fractures, Austin T. Sumner

Honors College Theses

Pressure vessels are very common pieces of equipment in industry and they are used for a variety of applications. It is standard in industry to rest pressure vessels on load cells. For some special cases, the pressure vessels are rested on load cells instead of solid foundation. Pressure vessels and their loadcells are generally designed for static environmental conditions and loading and tend to experience adverse effects when exposed to dynamic environments, such as hurricanes and earthquakes. These adverse-loading conditions cause vibrations and asymmetrical loading on the load cells, which can concurrently cause unexpected failure. This research investigates the effects …

Go to article

Electron Tunneling And X-Ray Photoelectron Spectoscopy Studies Of The Superconductiong Properties Of Nitrogen-Doped Niobium Resonator Cavities, Eric M. Lechner, Basu Dev Oli, Junki Makita, Gianluigi Ciovati, Alex Gurevich, Maria Iavarone Jan 2020

Electron Tunneling And X-Ray Photoelectron Spectoscopy Studies Of The Superconductiong Properties Of Nitrogen-Doped Niobium Resonator Cavities, Eric M. Lechner, Basu Dev Oli, Junki Makita, Gianluigi Ciovati, Alex Gurevich, Maria Iavarone

Physics Faculty Publications

We use scanning tunneling microscopy (STM) and spectroscopy (STS), and x-ray photoelectron spectroscopy (XPS) to investigate the effect of nitrogen doping on the surface electronic and chemical structures of cutouts from superconducting Nb radio-frequency cavities. The goal of this work is to get insights into the fundamental physics and materials mechanisms behind the striking decrease of the surface resistance with the radio-frequency magnetic field, which has been observed on N-doped Nb cavities. Our XPS measurements reveal significantly more oxidized Nb 3d states and a thinner metallic suboxide layer on the N-doped Nb surfaces, which is also confirmed by tunneling spectroscopy …

Go to article

Superconductivity In La₂Ni₂In, Jannis Maiwald, Igor I. Mazin, Alex Gurevich, Meigan Aronson Jan 2020

Superconductivity In La₂Ni₂In, Jannis Maiwald, Igor I. Mazin, Alex Gurevich, Meigan Aronson

Physics Faculty Publications

We report here the properties of single crystals of La2Ni2In. Electrical resistivity and specific heat measurements concur with the results of density functional theory calculations, finding that La2Ni2In is a weakly correlated metal, where the Ni magnetism is almost completely quenched, leaving only a weak Stoner enhancement of the density of states. Superconductivity is observed at temperatures below 0.9 K. A detailed analysis of the field and temperature dependencies of the resistivity, magnetic susceptibility, and specific heat at the lowest temperatures reveals that La2Ni2In is a dirty type-II …

Go to article

Flux Expulsion In Niobium Superconducting Radio-Frequency Cavities Of Different Purity And Essential Contributions To The Flux Sensitivity, P. Dhakal, Gianluigi Ciovati, Alex Gurevich Jan 2020

Flux Expulsion In Niobium Superconducting Radio-Frequency Cavities Of Different Purity And Essential Contributions To The Flux Sensitivity, P. Dhakal, Gianluigi Ciovati, Alex Gurevich

Physics Faculty Publications

Magnetic flux trapped during the cooldown of superconducting radio-frequency cavities through the transition temperature due to incomplete Meissner state is known to be a significant source of radio-frequency losses. The sensitivity of flux trapping depends on the distribution and the type of defects and impurities which pin vortices, as well as the cooldown dynamics when the cavity transitions from a normal to superconducting state. Here we present the results of measurements of the flux trapping sensitivity on 1.3 GHz elliptical cavities made from large-grain niobium with different purity for different cooldown dynamics and surface treatments. The results show that lower …

Go to article

Stable Dispersion Of Coal Fines During Hydraulic Fracturing Flowback In Coal Seam Gas Reservoirs - An Experimental Study, Faisal Ur Rahman Awan, Alireza Keshavarz, Hamed Akhondzadeh, Sarmad Al-Anssari, Ahmed Al-Yaseri, Ataollah Nosrati, Muhammad Ali, Sefan Iglauer Jan 2020

Stable Dispersion Of Coal Fines During Hydraulic Fracturing Flowback In Coal Seam Gas Reservoirs - An Experimental Study, Faisal Ur Rahman Awan, Alireza Keshavarz, Hamed Akhondzadeh, Sarmad Al-Anssari, Ahmed Al-Yaseri, Ataollah Nosrati, Muhammad Ali, Sefan Iglauer

Research outputs 2014 to 2021

In subterranean coal seam gas (CSG) reservoirs, massive amounts of small-sized coal fines are released during the production and development stages, especially during hydraulic fracturing stimulation. These coal fines inevitably cause mechanical pump failure and permeability damage due to aggregation and subsequent pore-throat blockage. This aggregation behavior is thus of key importance in CSG production and needs to be minimized. Consequently, such coal fines dispersions need to be stabilized, which can be achieved by the formulation of improved fracturing fluids. Here, we thus systematically investigated the effectiveness of two additives (ethanol, 0.5 wt % and SDBS, 0.001 and 0.01 wt …

Go to article

Review Of Polymer Composites With Diverse Nanofillers For Electromagnetic Interference Shielding, Dimuthu Wanasinghe, Farhad Aslani, Guowei Ma, Daryoush Habibi Jan 2020

Review Of Polymer Composites With Diverse Nanofillers For Electromagnetic Interference Shielding, Dimuthu Wanasinghe, Farhad Aslani, Guowei Ma, Daryoush Habibi

Research outputs 2014 to 2021

Polymer matrix composites have generated a great deal of attention in recent decades in various fields due to numerous advantages polymer offer. The advancement of technology has led to stringent requirements in shielding materials as more and more electronic devices are known to cause electromagnetic interference (EMI) in other devices. The drive to fabricate alternative materials is generated by the shortcomings of the existing metallic panels. While polymers are more economical, easy to fabricate, and corrosion resistant, they are known to be inherent electrical insulators. Since high electrical conductivity is a sought after property of EMI shielding materials, polymers with …

Go to article

Solids Velocity Measurement Using Electric Capacitance Sensor Assemblies, Usama Abrar, Liu Shi, Nasif Raza Jaffri, Qin Li, Hassan Raza Sindhu, Mian Waqas Omar Jan 2020

Solids Velocity Measurement Using Electric Capacitance Sensor Assemblies, Usama Abrar, Liu Shi, Nasif Raza Jaffri, Qin Li, Hassan Raza Sindhu, Mian Waqas Omar

Research outputs 2014 to 2021

This paper covers the application of the cross-correlation method for measuring the velocity of solid particles. Capacitive electrodes are used as primary sensors to measure the time required by the solid particles to cover a known distance between the electrodes. The capacitive variations of both the electrode sensors are stored in computer synchronously for offline estimation of the velocity of the solid particles. Single glass marble is used as a solid particle to conduct the performance in the lab for its good signal to noise ratio (SNR) and vivid graphs. Matlab R2018a is used as a programming tool to perform …

Go to article

Evaluation Of Nox‑Reduction Measures For Iron-Ore Rotary Kilns, Rikard Ekland, Thomas Allguren, Christian Fredriksson, Denver Haycock, Colson Johnson, Jacob Fransen, Thomas H. Fletcher, Klas Andersson Jan 2020

Evaluation Of Nox‑Reduction Measures For Iron-Ore Rotary Kilns, Rikard Ekland, Thomas Allguren, Christian Fredriksson, Denver Haycock, Colson Johnson, Jacob Fransen, Thomas H. Fletcher, Klas Andersson

Faculty Publications

The grate-kiln process is employed for sintering and oxidation of iron-ore pellets. In this process, a fuel (typically coal) is combusted with a large amount of excess air in a rotary kiln, and the high air-to-fuel ratio leads to significant NOx formation. The current Article is an assessment of NOx reduction measures that have been tested in pilot-scale and in full-scale by the Swedish iron-ore company Luossavaara-Kiirunavaara Aktiebolag (LKAB). The results show that the scaling between the full-scale kiln and the pilot-scale kiln is crucial, and several primary measures that reduce NOx significantly in pilot-scale achieve negligible reduction in full-scale. …

Go to article

Energy Efficiency Of A Flat-Plate Solar Collector Using Thermally Treated Graphene-Based Nanofluids: Experimental Study, Omer A. Alawi, Haslinda Mohamed Kamar, Hussein A. Mohammed, A. R. Mallah, Omar A. Hussein Jan 2020

Energy Efficiency Of A Flat-Plate Solar Collector Using Thermally Treated Graphene-Based Nanofluids: Experimental Study, Omer A. Alawi, Haslinda Mohamed Kamar, Hussein A. Mohammed, A. R. Mallah, Omar A. Hussein

Research outputs 2014 to 2021

© The Author(s) 2020. A covalent functionalization approach was utilized for the preparation of highly dispersed pentaethylene glycol-thermally treated graphene-water as the absorbing material inside a flat-plate solar collector. Four mass fractions of nanofluids were prepared (0.025, 0.05, 0.075, and 0.1 wt% pentaethylene glycol-thermally treated graphene-water). Graphene nanoparticles were characterized by energy dispersive X-ray analysis with a scanning electron microscope. Measurements of the thermophysical properties were subsequently carried out for the nanosuspensions. The raw investigation data were collected from an indoor flat-plate solar collector test setup. The experimental procedure included different sets of variables such as input temperatures of 303, …

Go to article

Seismic Design Of Masonry-Infilled Frames: A Review Of Codified Approaches, Sonam Dorji, Hossein Derakhshan, Tatheer Zahra, David V. Thambiratnam, Alireza Mohyeddin Jan 2020

Seismic Design Of Masonry-Infilled Frames: A Review Of Codified Approaches, Sonam Dorji, Hossein Derakhshan, Tatheer Zahra, David V. Thambiratnam, Alireza Mohyeddin

Research outputs 2014 to 2021

This paper reviews the approach of eleven national codes on the analysis and design of masonry-infilled frames. It is shown that, in general, codes can be divided into two groups. The first group isolates the masonry and frame members by providing gaps to minimize the interaction between them. This method ensures that the complexities involved in analyzing the structure is avoided. However, the width of the gaps recommended is different for each of the codes. The second group takes advantage of the presence of high stiffness and strength masonry infill. In this technique, an equivalent-strut modeling strategy is mostly recommended. …

Go to article

Selective Adsorption Of Rare Earth Ions From Aqueous Solution On Metal-Organic Framework Hkust-1, Liang Zhao, Xiaoguang Duan, Muhammad R. A. Azhar, Hongqi Sun, Xiangchen Fang, Shaobin Wang Jan 2020

Selective Adsorption Of Rare Earth Ions From Aqueous Solution On Metal-Organic Framework Hkust-1, Liang Zhao, Xiaoguang Duan, Muhammad R. A. Azhar, Hongqi Sun, Xiangchen Fang, Shaobin Wang

Research outputs 2014 to 2021

Recovery of rare earth ions from wastewater holds an important strategy for the use of the precious resources. In this study, we found that a metal-organic framework (MOF), HKUST-1, exhibited a high affinity and selectivity towards adsorptive recovery of rare earth ions (Ce3+ and La3+) in aqueous solutions. The adsorbent showed a remarkable adsorption capacity of 234 mg/g and 203 mg/g for Ce3+ and La3+ at pH = 6, respectively. More importantly, its adsorption selectivity of the rare earth ions was about 87% against other metal ions. The adsorption isotherm, kinetics, and mechanism in the process were also investigated. The …

Go to article

Mhd Heat Transfer In W-Shaped Inclined Cavity Containing A Porous Medium Saturated With Ag/Al2o3 Hybrid Nanofluid In The Presence Of Uniform Heat Generation/Absorption, Mohamed Dhia Massoudi, Mohamed Bechir Ben Hamida, Hussein A. Mohammed, Mohammed A. Almeshaal Jan 2020

Mhd Heat Transfer In W-Shaped Inclined Cavity Containing A Porous Medium Saturated With Ag/Al2o3 Hybrid Nanofluid In The Presence Of Uniform Heat Generation/Absorption, Mohamed Dhia Massoudi, Mohamed Bechir Ben Hamida, Hussein A. Mohammed, Mohammed A. Almeshaal

Research outputs 2014 to 2021

© 2020 by the Authors. In this paper, a 2D numerical study of natural convection heat transfer in a W-shaped inclined enclosure with a variable aspect ratio was performed. The enclosure contained a porous medium saturated with Ag/Al2O3 hybrid nanofluid in the presence of uniform heat generation or absorption under the effect of a uniform magnetic field. The vertical walls of the enclosure were heated differentially; however, the top and bottom walls were kept insulated. The governing equations were solved with numerical simulation software COMSOL Multiphysics which is based on the finite element method. The results showed that the convection …

Go to article

Effect Of Environment-Friendly Non-Ionic Surfactant On Interfacial Tension Reduction And Wettability Alteration; Implications For Enhanced Oil Recovery, Omid Mosalman Haghighi, Ghasem Zargar, Abbas Khaksar Manshad, Muhammad Ali, Mohammad Ali Takassi, Jagar A. Ali, Alireza Keshavarz Jan 2020

Effect Of Environment-Friendly Non-Ionic Surfactant On Interfacial Tension Reduction And Wettability Alteration; Implications For Enhanced Oil Recovery, Omid Mosalman Haghighi, Ghasem Zargar, Abbas Khaksar Manshad, Muhammad Ali, Mohammad Ali Takassi, Jagar A. Ali, Alireza Keshavarz

Research outputs 2014 to 2021

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. Production from mature oil reservoirs can be optimized by using the surfactant flooding technique. This can be achieved by reducing oil and water interfacial tension (IFT) and modifying wettability to hydrophilic conditions. In this study, a novel green non-ionic surfactant (dodecanoyl-glucosamine surfactant) was synthesized and used to modify the wettability of carbonate reservoirs to hydrophilic conditions as well as to decrease the IFT of hydrophobic oil-water systems. The synthesized non-ionic surfactant was characterized by Fourier transform infrared spectroscopy (FTIR) and chemical shift nuclear magnetic resonance (HNMR) analyses. Further pH, turbidity, density, …

Go to article

In Situ Wettability Investigation Of Aging Of Sandstone Surface In Alkane Via X-Ray Microtomography, Nilesh Kumar Jha, Maxim Lebedev, Stefan Iglauer, Jitendra S. Sangwai, Mohammad Sarmadivaleh Jan 2020

In Situ Wettability Investigation Of Aging Of Sandstone Surface In Alkane Via X-Ray Microtomography, Nilesh Kumar Jha, Maxim Lebedev, Stefan Iglauer, Jitendra S. Sangwai, Mohammad Sarmadivaleh

Research outputs 2014 to 2021

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. Wettability of surfaces remains of paramount importance for understanding various natural and artificial colloidal and interfacial phenomena at various length and time scales. One of the problems discussed in this work is the wettability alteration of a three-phase system comprising high salinity brine as the aqueous phase, Doddington sandstone as porous rock, and decane as the nonaqueous phase liquid. The study utilizes the technique of in situ contact angle measurements of the several 2D projections of the identified 3D oil phase droplets from the 3D images of the saturated sandstone miniature …

Go to article

Evaluation Of Microstructure Variation Of Tc11 Alloy After Electroshocking Treatment, Lechun Xie, Chang Liu, Yanli Song, Haojie Guo, Zhongqi Wang, Lin Hua, Liqiang Wang, Lai-Chang Zhang Jan 2020

Evaluation Of Microstructure Variation Of Tc11 Alloy After Electroshocking Treatment, Lechun Xie, Chang Liu, Yanli Song, Haojie Guo, Zhongqi Wang, Lin Hua, Liqiang Wang, Lai-Chang Zhang

Research outputs 2014 to 2021

Electro-shocking treatment (EST) has been investigated as a pathway to optimise the microstructure and mechanical properties of titanium alloys. The thermal conditions introduced by EST resulted in a phase transformation from α to β. The fraction of β phase decreased from 25.27% to 19.47% after EST for 0.02 s, which was possibly caused by the recrystallization of α phase. The application of EST for 0.04 s resulted in an increase in volume fraction of the β phase to 26.95%. The energy introduced by EST resulted in changes to the direction and intensity of texture within the microstructure with the texture …

Go to article

Visual Flight Into Instrument Meteorological Condition: A Post Accident Analysis, Ayiei Ayiei, John Murray, Graham Wild Jan 2020

Visual Flight Into Instrument Meteorological Condition: A Post Accident Analysis, Ayiei Ayiei, John Murray, Graham Wild

Research outputs 2014 to 2021

The phenomenon of encountering instrument meteorological conditions (IMCs) while operating an aircraft under visual flight rules (VFRs) remains a primary area of concern. Studies have established that pilots operating under VFRs that continue to operate under IMCs remains a significant cause of accidents in general aviation (GA), resulting in hundreds of fatalities. This research used the Australian Transport Safety Bureau (ATSB) database, which contained a total of 196 VFR to IMC occurrences, from 2003 to 2019, with 26 having formal reports. An explanatory design was adopted, commencing with a qualitative study of the 26 occurrences with reports followed by a …

Go to article

Application Of A Brain-Inspired Spiking Neural Network Architecture To Odor Data Classification, Anup Vanarse, Josafath Israel Espinosa-Ramos, Adam Osseiran, Alexander Rassau, Nikola Kasabov Jan 2020

Application Of A Brain-Inspired Spiking Neural Network Architecture To Odor Data Classification, Anup Vanarse, Josafath Israel Espinosa-Ramos, Adam Osseiran, Alexander Rassau, Nikola Kasabov

Research outputs 2014 to 2021

Existing methods in neuromorphic olfaction mainly focus on implementing the data transformation based on the neurobiological architecture of the olfactory pathway. While the transformation is pivotal for the sparse spike-based representation of odor data, classification techniques based on the bio-computations of the higher brain areas, which process the spiking data for identification of odor, remain largely unexplored. This paper argues that brain-inspired spiking neural networks constitute a promising approach for the next generation of machine intelligence for odor data processing. Inspired by principles of brain information processing, here we propose the first spiking neural network method and associated deep machine …

Go to article

Cyber-Security Constrained Placement Of Facts Devices In Power Networks From A Novel Topological Perspective, Hossein Parastvand, Octavian Bass, Mohammad A. S. Masoum, Airlie Chapman, Stefan Lachowicz Jan 2020

Cyber-Security Constrained Placement Of Facts Devices In Power Networks From A Novel Topological Perspective, Hossein Parastvand, Octavian Bass, Mohammad A. S. Masoum, Airlie Chapman, Stefan Lachowicz

Research outputs 2014 to 2021

Optimal placement of flexible AC transmission systems (FACTS) devices and the cyber-security of associated data exchange are crucial for the controllability of wide area power networks. The placement of FACTS devices is studied in this paper from a novel graph theoretic perspective, which unlike the existing approaches, purely relies on topological characteristics of the underlying physical graphs of power networks. To this end, the maximum matching principle (MMP) is used to find the set of required FACTS devices for the grid controllability. In addition, the cyber-security of the most critical data related to the FACTS controllers is guaranteed by introducing …

Go to article

Reservoir And Lithofacies Shale Classification Based On Nmr Logging, Hongyan Yu, Zhenliang Wang, Fenggang Wen, Reza Rezaee, Maxim Lebedev, Xiaolong Li, Yihuai Zhang, Stefan Iglauer Jan 2020

Reservoir And Lithofacies Shale Classification Based On Nmr Logging, Hongyan Yu, Zhenliang Wang, Fenggang Wen, Reza Rezaee, Maxim Lebedev, Xiaolong Li, Yihuai Zhang, Stefan Iglauer

Research outputs 2014 to 2021

© 2020 Chinese Petroleum Society Shale gas reservoirs have fine-grained textures and high organic contents, leading to complex pore structures. Therefore, accurate well-log derived pore size distributions are difficult to acquire for this unconventional reservoir type, despite their importance. However, nuclear magnetic resonance (NMR) logging can in principle provide such information via hydrogen relaxation time measurements. Thus, in this paper, NMR response curves (of shale samples) were rigorously mathematically analyzed (with an Expectation Maximization algorithm) and categorized based on the NMR data and their geology, respectively. Thus the number of the NMR peaks, their relaxation times and amplitudes were analyzed …

Go to article

A Saliency-Driven Video Magnifier For People With Low Vision, Ali Selman Aydin, Shirin Feiz, Iv Ramakrishnan, Vikas Ashok Jan 2020

A Saliency-Driven Video Magnifier For People With Low Vision, Ali Selman Aydin, Shirin Feiz, Iv Ramakrishnan, Vikas Ashok

Computer Science Faculty Publications

Consuming video content poses significant challenges for many screen magnifier users, which is the “go to” assistive technology for people with low vision. While screen magnifier software could be used to achieve a zoom factor that would make the content of the video visible to low-vision users, it is oftentimes a major challenge for these users to navigate through videos. Towards making videos more accessible for low-vision users, we have developed the SViM video magnifier system [6]. Specifically, SViM consists of three different magnifier interfaces with easy-to-use means of interactions. All three interfaces are driven by visual saliency as a …

Go to article

Smart Communities: From Sensors To Internet Of Things And To A Marketplace Of Services, Stephan Olariu, Nirwan Ansari (Editor), Andreas Ahrens (Editor), Cesar Benavente-Preces (Editor) Jan 2020

Smart Communities: From Sensors To Internet Of Things And To A Marketplace Of Services, Stephan Olariu, Nirwan Ansari (Editor), Andreas Ahrens (Editor), Cesar Benavente-Preces (Editor)

Computer Science Faculty Publications

Our paper was inspired by the recent Society 5.0 initiative of the Japanese Government that seeks to create a sustainable human-centric society by putting to work recent advances in technology: sensor networks, edge computing, IoT ecosystems, AI, Big Data, robotics, to name just a few. The main contribution of this work is a vision of how these technological advances can contribute, directly or indirectly, to making Society 5.0 reality. For this purpose we build on a recently-proposed concept of Marketplace of Services that, in our view, will turn out to be one of the cornerstones of Society 5.0. Instead of …

Go to article

Numerical Investigation Of Darrieus Wind Turbine With Slotted Airfoil Blades, Ahmed Elbaz, Omar Sherif Mohamaed, Ahmed Abdelhamid Ibrahim, Ahmed Khaled Etman, Amr A. Abdelfattah Jan 2020

Numerical Investigation Of Darrieus Wind Turbine With Slotted Airfoil Blades, Ahmed Elbaz, Omar Sherif Mohamaed, Ahmed Abdelhamid Ibrahim, Ahmed Khaled Etman, Amr A. Abdelfattah

Mechanical Engineering

Low starting torque is considered as one of the major drawbacks of Darrieus type vertical axis wind turbine (VAWT). Design optimization to overcome this problem by modifying the airfoil geometry has received great attention by the wind energy community. Moreover, efforts have been directed towards augmenting the power coefficient of the turbine. In the present work, the effect of employing slotted airfoil as turbine blade on the performance and starting characteristics has been investigated. The slot parameters; slot location, angle of inclination, and dimensions, were optimized for NACA 0018 airfoil which is commonly used in Darrieus turbines. The flow over …

Go to article

Indirect Thermosiphon Flat-Plate Solar Collector Performance Based On Twisted Tube Design Heat Exchanger Filled With Nanofluid, Mahmoud Eltaweel, Hazem Hussien, Ahmed A. Abdel-Rehim Jan 2020

Indirect Thermosiphon Flat-Plate Solar Collector Performance Based On Twisted Tube Design Heat Exchanger Filled With Nanofluid, Mahmoud Eltaweel, Hazem Hussien, Ahmed A. Abdel-Rehim

Mechanical Engineering

No abstract provided.

Go to article

Energetic And Exergetic Analysis Of A Heat Pipe Evacuated Tube Solar Collector Using Mwcnt/Water Nanofluid, Mahmoud Eltaweel, Ahmed A. Abdel-Rehim Jan 2020

Energetic And Exergetic Analysis Of A Heat Pipe Evacuated Tube Solar Collector Using Mwcnt/Water Nanofluid, Mahmoud Eltaweel, Ahmed A. Abdel-Rehim

Mechanical Engineering

Increasing the energy demand and the limited availability of conventional energy sources are the main challenges to secure the human future. Solar energy is an attractive source of energy to ensure the sustainability of energy in this world for now and for the future. Evacuated tube solar collector is a solar thermal collector mostly used for domestic applications. The replacement of the working fluid with nanofluid can enhance the heat transfer even for low temperature applications. The effect of multi-walled carbon nanotubes and water nanofluid as working fluid in evacuated tube solar collector is used to experimentally investigate the energy …

Go to article

Efficiency Of Gas Turbine Engines, Tahir A. Upshaw Jan 2020

Efficiency Of Gas Turbine Engines, Tahir A. Upshaw

The Kennesaw Journal of Undergraduate Research

The following research involves conducting a confirmation of test bench results, and parametric cycle analysis. The results from these two methods of data collection is meant to show relationship between both. Where the data of the price induction can be verified with the parametric cycle analysis of the individual components to calculate the thrust and efficiency. Once we compare both methods, it will allow us to move on to part two of the research which involves determining how to make gas turbine engines more efficient based on the collected data.

Go to article

Tensile-Strained Self-Assembly: Tunable Nanomaterials For Infrared Optoelectronics And Quantum Optics, Paul Simmonds Jan 2020

Tensile-Strained Self-Assembly: Tunable Nanomaterials For Infrared Optoelectronics And Quantum Optics, Paul Simmonds

Materials Science and Engineering Faculty Publications and Presentations

Discovered recently, tensile-strained quantum dots are optically active, defect-free nanostructures. Large tensile strains allow us to tailor band structures for applications from tunable infrared emitters to entangled photon sources. I will discuss the history, current state-of-the-art, and future directions of this rapidly expanding research field.

Go to article

First Prev Next Last