Engineering Commons^™

On-Body Pressure For Subcutaneous Infusion Of Drug, Hannah Cole, Kayla Meacham, Eleanor Moran, Kaylee Voss

Biomedical Engineering

No abstract provided.

Integrity Testing Of Gas Permeable Silicone Filters, Maggie M. Baker, Thomas P. Humann, Kevin J. Yerina

Biomedical Engineering

This report investigates the most reasonable, cost efficient, and reliable ways to integrity test a filter made from a permeable silicone membrane for future biomedical and pharmaceutical applications. The goal of the project was to create a fixture that a pharmaceutical company can use to quickly and reliably test the integrity of the filter. A variety of methods are outlined to test the integrity of the filter, after a series of quantitative tests, a single method was established that meet the requirements most thoroughly. The method that was determined to be most effective involves a series of components including a …

Utilization And Standardization Of Beverage Based Containers, Michael T. Bobke, Jack C. Maughan, Kenia Vargas

Industrial and Manufacturing Engineering

The purpose of this document is to formally describe and explain all of the decisions associated with the data collection and analysis for this Cal Poly Senior Project. Throughout the project, we will utilize and hone the skills that each team member has developed during our time in Cal Poly's Engineering program. In addition, this document will briefly describe some of Blue Diamond’s history as one of the biggest almond companies in the world. The statement of work will introduce and describe the current status of the beverage base container process and international beverage container design. Next it will discuss …

Rebar Impalement Safety, Spencer C. Nefores, Steven M. Hoover

Industrial and Manufacturing Engineering

This project is sponsored by Webcor with the purpose of finding a better solution to rebar impalement safety. The current rebar impalement safety caps being used by Webcor were found to frequently fall off after being installed. This results in workers being exposed to the hazard for longer than desired. The research that has been done by the team showed that rebar impalement is a serious hazard and results in injury or death every year. Site visits and interviews were performed to aid in understanding the problem and designing solutions. The customer needs, current state of the problem, existing solutions, …

Parklets San Luis, Owen Kenny, Preston Jag Stebel, Leonidas Goodman, Lukas Braun

Industrial and Manufacturing Engineering

Downtown San Luis Obispo has been a popular destination for tourists, students, families, and roadtrippers. However, according to Ryan Betz, Interim Assistant to the City Manager, foot traffic and retail business revenue has been decreasing. Downtown SLO does not have enough free public spaces. Recent projects such as sidewalk bump outs and lighted crosswalks have aimed at making SLO more pedestrian accessible, but they have not actually made downtown more pleasurable. These projects have not seemed to drive any more business or traffic downtown. There are a myriad of ways to rectify this; studies show that having a free place …

John Houbolt: The Unsung Hero Of The Apollo Moon Landings, William F. Causey

Purdue University Press Book Previews

In May 1961, President Kennedy announced that the United States would attempt to land a man on the moon and return him safely to the earth before the end of that decade. Yet NASA did not have a specific plan for how to accomplish that goal. Over the next fourteen months, NASA vigorously debated several options. At first the consensus was to send one big rocket with several astronauts to the moon, land and explore, and then take off and return the astronauts to earth in the same vehicle. Another idea involved launching several smaller Saturn V rockets into the …

Synthesizing General Electromagnetic Partially Coherent Sources From Random, Correlated Complex Screens, Milo W. Hyde Iv

Faculty Publications

We present a method to generate any genuine electromagnetic partially coherent source (PCS) from correlated, stochastic complex screens. The method described here can be directly implemented on existing spatial-light-modulator-based vector beam generators and can be used in any application which utilizes electromagnetic PCSs. Our method is based on the genuine cross-spectral density matrix criterion. Applying that criterion, we show that stochastic vector field realizations (corresponding to a desired electromagnetic PCS) can be generated by passing correlated Gaussian random numbers through “filters” with space-variant transfer functions. We include step-by-step instructions on how to generate the electromagnetic PCS field realizations. As an …

Optimizing The Environmental And Economic Sustainability Of Remote Community Infrastructure, Jamie E. Filer, Justin D. Delorit, Andrew J. Hoisington, Steven J. Schuldt

Faculty Publications

Remote communities such as rural villages, post-disaster housing camps, and military forward operating bases are often located in remote and hostile areas with limited or no access to established infrastructure grids. Operating these communities with conventional assets requires constant resupply, which yields a significant logistical burden, creates negative environmental impacts, and increases costs. For example, a 2000-member isolated village in northern Canada relying on diesel generators required 8.6 million USD of fuel per year and emitted 8500 tons of carbon dioxide. Remote community planners can mitigate these negative impacts by selecting sustainable technologies that minimize resource consumption and emissions. However, …

On Controlling Interfacial Heterogeneity To Trigger Bridging In Secondary Bonded Composite Joints: An Efficient Strategy To Introduce Crack-Arrest Features, Ran Tao, Xiaole Li, Arief Yudhanto, Marco Alfano, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Secondary adhesive bonding of carbon fiber-reinforced polymer laminates is of great interest for the aerospace and automotive industries. However, joint reliability is still a major concern because of fabrication-induced or service-related cracks that are difficult to monitor and can lead to catastrophic failure. In this work, we propose a patterning strategy where the careful design of spatially varying interface properties enables the formation of an adhesive ligament that acts as a crack-arrest feature. Bi-dimensional finite element models of adhesively bonded double cantilever beams were employed to investigate the role of the main parameters of the pattern (i.e., geometrical parameters and …

Bs News March/April

Building Services Engineering

No abstract provided.

A Bridge-Rehabilitation Strategy Based On The Analysis Of A Bridge-Inspection Data Set, Liam Dromey, Kieran Ruane, John J. Murphy, Brian O'Rourke, Seán Lacey

Publications

Bridge-management systems (BMSs) allow bridge owners to assess the condition of their bridge stock. However, not all BMS packages have the capability to formulate network-level bridge-rehabilitation investment strategies. This research has developed a decision-support system for bridge owners in the selection of the best strategy for bridge rehabilitation at the network level. The basis of the research is an available data set of 1367 bridge-inspection records for County Cork, Ireland, that has been prepared to the Eirspan BMS inspection standard. The developed system consists of a project-prioritisation procedure that builds on previous research, a methodology for the calculation of a …

Improved Denoising Of Structural Vibration Data Employing Bilateral Filtering, Ning Liu, Thomas Schumacher

Civil and Environmental Engineering Faculty Publications and Presentations

With the continuous advancement of data acquisition and signal processing, sensors, and wireless communication, copious research work has been done using vibration response signals for structural damage detection. However, in actual projects, vibration signals are often subject to noise interference during acquisition and transmission, thereby reducing the accuracy of damage identification. In order to effectively remove the noise interference, bilateral filtering, a filtering method commonly used in the field of image processing for improving data signal-to-noise ratio was introduced. Based on the Gaussian filter, the method constructs a bilateral filtering kernel function by multiplying the spatial proximity Gaussian kernel function …

Insulative (Direct Current) Dielectrophoretic Foul-Less Filtration In Microfuidic Systems, Matthew A A Whitman

Master's Theses

Filtration is a technology that is used almost ubiquitously in society from uses raging from filtration of macroparticles from water to pharmaceutical grade filtration products to remove anything larger than a protein. However, with such a wide range of uses, most filtration products have the same issue; membrane clogging (fouling) that prevents continuous use and requires frequent maintenance. This thesis hypothesizes that by applying a direct current (DC) to an insulating array of posts, they will create a foul-less insulative dielectrophoretic filter (iDEP) that does not clog since particles will levitate above the insulating array.

This thesis tested an inherited …

Electricity Price Forecasting Using A Convolutional Neural Network, Elliott Winicki

Master's Theses

Many methods have been used to forecast real-time electricity prices in various regions around the world. The problem is difficult because of market volatility affected by a wide range of exogenous variables from weather to natural gas prices, and accurate price forecasting could help both suppliers and consumers plan effective business strategies. Statistical analysis with autoregressive moving average methods and computational intelligence approaches using artificial neural networks dominate the landscape. With the rise in popularity of convolutional neural networks to handle problems with large numbers of inputs, and convolutional neural networks conspicuously lacking from current literature in this field, convolutional …

A System Architecture For Phased Development Of Remote Suas Operation, Eric Ashley

Master's Theses

Current airspace regulations require the remote pilot-in-command of an unmanned aircraft systems (UAS) to maintain visual line of sight with the vehicle for situational awareness. The future of UAS will not have these constraints as technology improves and regulations are changed. An operational model for the future of UAS is proposed where a remote operator will monitor remote vehicles with the capability to intervene if needed. One challenge facing this future operational concept is the ability for a flight data system to effectively communicate flight status to the remote operator. A system architecture has been developed to facilitate the implementation …

Web Application For Movie Performance Prediction, Devalkumar Patel

Electronic Theses, Projects, and Dissertations

This is an amazing and unique idea for the web application. The purpose of this application is to address those movie lover people who is always in a hurry to visit the theatre to watch upcoming movies irrespective of which star cast is in it. This system is a mixture of desktop applications, python libraries, and simple math arithmetic. The application can be used by anyone which is ultimately helping them to decide, either they should watch the movie or not. The user just submits the name of the movie. This application is developed in Visual Studio 2019 for functioning …

Methods To Increase Algae Biomass Productivity In Raceway Pond Monocultures, Ryan S. Anderson

Master's Theses

The economics of algae biofuels and bioproducts would be improved by increased biomass productivity. Two studies on this potential are described in this thesis – one on a locally isolated filamentous yellow-green alga and the other on a planktonic strain genetically improved via selective enrichment.

Polycultures have been viewed as productive, stable, and, in some cases, harvestable by natural bioflocculation. Local native strains might have higher productivity than culture collection strains because they are already adapted to local outdoor conditions. In this study, the filamentous yellow-green alga Tribonema minus was isolated from a local volunteer polyculture. Its productivity as a …

Skier's Edge: Biomechanical Analysis, Benjamin T. Johannes

Master's Theses

ABSTRACT

Skier’s Edge: Biomechanical Analysis

Benjamin T. Johannes

The Skier’s Edge trainer can be used by novice or expert skiers. Testing was performed to analyze if the use of the Skier’s Edge could reduce in shear forces of the valgus moment on the knee joint and anterior cruciate ligament (ACL) due to lesser fatigue of muscle and a higher hamstring to quadricep (H/Q) ratio activity. This leads to a reduction of improper form and an increase in balance. Experiments performed observed the change in muscle activity with the use of the Skier’s Edge over time when compared to other forms …

Critical Review Of Asphaltene Properties And Factors Impacting Its Stability In Crude Oil, Sherif Fakher, Mohamed Ahdaya, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Asphaltene is a component of crude oil that has been reported to cause severe problems during production and transportation of the oil from the reservoir. It is a solid component of the oil that has different structures and molecular makeup which makes it one of the most complex components of the oil. This research provides a detailed review of asphaltene properties, characteristics, and previous studies to construct a guideline to asphaltene and its impact on oil recovery. The research begins with an explanation of the main components of crude oil and their relation to asphaltene. The method by which asphaltene …

Insights Into The Applications Of Waste Materials In The Oil And Gas Industry: State Of The Art Review, Availability, Cost Analysis, And Classification, Abo Taleb T. Al-Hameedi, Husam H. Alkinani, Hussein W. Albazzaz, Shari Dunn-Norman, Mohammed M. Alkhamis

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This study investigates different types of waste materials and their applicability in the oil and gas industry as well as analyzing various applications of these waste materials in the petroleum industry. This study also explores the availability of these waste materials by performing a statistical analysis in a good number of countries worldwide. The statistical study was performed starting with a study on which countries generate waste the most overall, followed by examining multiple countries and investigating their top three most available waste. The results showed that the USA is the leading country in terms of municipal solid waste generation …

A Data Analysis Of Immiscible Carbon Dioxide Injection Applications For Enhanced Oil Recovery Based On An Updated Database, Sherif Fakher, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Carbon dioxide (CO₂) injection is an enhanced oil recovery technique used worldwide to increase oil recovery from hydrocarbon reservoirs. Immiscible CO₂ injection involves injecting the CO₂ into the reservoir at a pressure below which it will become miscible in the oil. Even though immiscible CO₂ injection has been applied extensively, very little research has been conducted to provide a comprehensive understanding of the mechanism and the applications of immiscible CO₂ injection. This research performs an in-depth data analysis is performed based on more than 200 experiments and 20 field tests from more than 40 …

Experimental Characterization Of The Electrostatic Levitation Force In Mems Transducers, Meysam Daeichin, Ronald Miles, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

In this study, a two-step experimental procedure is described to determine the electrostatic levitation force in MEMS transducers. In these two steps, the microstructure is excited quasi-statically and dynamically and its response is used to derive the electrostatic force. The experimental results are obtained for a 1 by 1 plate that employs 112 levitation units. The experimentally obtained force is used in a lumped parameter model to find the microstructure response when it is subjected to different dynamical loads. The natural frequency and the damping ratios in the model are identified from the experimental results. The results show this procedure …

Decentralized, Noncooperative Multirobot Path Planning With Sample-Basedplanners, William Le

Master's Theses

In this thesis, the viability of decentralized, noncooperative multi-robot path planning algorithms is tested. Three algorithms based on the Batch Informed Trees (BIT*) algorithm are presented. The first of these algorithms combines Optimal Reciprocal Collision Avoidance (ORCA) with BIT*. The second of these algorithms uses BIT* to create a path which the robots then follow using an artificial potential field (APF) method. The final algorithm is a version of BIT* that supports replanning. While none of these algorithms take advantage of sharing information between the robots, the algorithms are able to guide the robots to their desired goals, with the …

Piezoelectric Energy Harvesting Suspension System For A Half Car Model: Analytical And Experimental Study, Doaa Ali Nasser Al-Yafeai

Mechanical Engineering Theses

One of the essential techniques for energy harvesting is the clean energy collection from ambient vibration. Recently, piezoelectric energy harvesting systems became a hot topic and attracted many researchers. This is due to their simple structure, relatively high output power among the other mechanisms (electromagnetic and electrostatic), compatibility with MEMS, and operation in a wide frequency range. The main objective of the current work is to develop a mathematical model to evaluate the potential of harvesting power from the car suspension system. Quarter and half car models with a built-in piezoelectric stack were modeled mathematically using Laplace transformation and simulated …

Bayesian Calibration At The Urban Scale: A Case Study On A Large Residential Heating Demand Application In Amsterdam, Cheng-Kai Wang, Simon Tindemans, Clayton Miller, Giorgio Agugiaro, Jantien Stoter

Research Collection College of Integrative Studies

A bottom-up building energy modelling at the urban scale based on Geographic Information System and semantic 3D city models can provide quantitative insights to tackle critical urban energy challenges. Nevertheless, incomplete information is a common obstacle to produce reliable modelling results. The residential building heating demand simulation performance gap caused by input uncertainties is discussed in this study. We present a data-driven urban scale energy modelling framework from open-source data harmonization, sensitivity analysis, heating demand simulation at the postcode level to Bayesian calibration with six years of training data and two years of validation data. Comparing the baseline and the …

Undergraduate Pilot Training Attrition: An Analysis Of Individual And Class Composition Component Factors, Christina M. Akers

Theses and Dissertations

The Air Force is working hard to reduce the shortage of nearly 2,000 pilots that threatens the Air Force’s core mission. Officials have focused on increasing retention and training throughput. Despite this, the first Pilot Training Next class graduated in August of 2018 with 13 of the initial 20 students (65.5% graduation rate). The purpose of this research is to explore attrition reduction by understanding how class composition of individual abilities and personalities affects the class graduation rate. Using AFOQT scores, SDI+ scores, PCSM scores, flight hours, and college GPAs, correlations were studied and a simple linear regression was run …

Providing Rational For Further Funding Additive Manufacturing Efforts In The Air Force, Trever J. Braunberger

Theses and Dissertations

Extremely long lead times for legacy aircraft replacement parts often exceed 120 days and cost 3 to 4 times the original price drives a search for alternative manufacturing methods such as additive manufacturing. Currently, the method to procuring a legacy replacement for aircraft such as the C-130 is daunting and at times, impossible. Through a comprehensive knowledge collection of organizational data the Air Force body of knowledge increases and provides actionable data to decision makers which has the potential of dramatically decreasing part wait times and procurement. The proposed, intuitive decision analysis framework mapped out in this research provides relevant …

Meta Learning Recommendation System For Classification, Clarence O. Williams Iii

Theses and Dissertations

A data driven approach is an emerging paradigm for the handling of analytic problems. In this paradigm the mantra is to let the data speak freely. However, when using machine learning algorithms, the data does not naturally reveal the best or even a good approach for algorithm choice. One method to let the algorithm reveal itself is through the use of Meta Learning, which uses the features of a dataset to determine a useful model to represent the entire dataset. This research proposes an improvement on the meta-model recommendation system by adding classification problems to the candidate problem space with …

Improved Ground-Based Monocular Visual Odometry Estimation Using Inertially-Aided Convolutional Neural Networks, Josiah D. Watson

Theses and Dissertations

While Convolutional Neural Networks (CNNs) can estimate frame-to-frame (F2F) motion even with monocular images, additional inputs can improve Visual Odometry (VO) predictions. In this thesis, a FlowNetS-based [1] CNN architecture estimates VO using sequential images from the KITTI Odometry dataset [2]. For each of three output types (full six degrees of freedom (6-DoF), Cartesian translation, and transitional scale), a baseline network with only image pair input is compared with a nearly identical architecture that is also given an additional rotation estimate such as from an Inertial Navigation System (INS). The inertially-aided networks show an order of magnitude improvement over the …

Neutron Energy Effects On Asteroid Deflection, Lansing S. Horan Iv

Theses and Dissertations

In the future, a hazardous asteroid will find itself on a collision course with Earth. It is an inevitability; the question is not if, but when. For asteroids of moderate size or larger, a nuclear device is one of humanity's only technologies capable of mitigating this threat via deflection on a timescale of less than a decade. This work examined how changing the output neutron energy from a nuclear device detonation affects asteroid deflection. The notional asteroid target was 300 meters in diameter and composed of silicon dioxide at a bulk density of 1.855 g/cm³. To calculate the …