Engineering Commons^™

Seismic Attribute Fracture Analysis And Thin And Thick-Skinned Structural Controls On The Evolution Of A Foreland Basin - Parrando And Guavio Anticlines, Eastern Cordillera Foothills, Colombia, Ibraheem Khalil Hafiz

Theses and Dissertations

The Parrando and Guavio anticlines are located in the Llanos foothills on the eastern flank of the Eastern Cordillera of Colombia. This study presents new 3D horizon maps, seismic and stratigraphic interpretations, and 1D burial models based on a 3D seismic volume, 2D seismic lines, and well logs. The Guavio anticline was formed by overlapping Miocene-Pliocene fault-bend folds and inversion of the Guaicaramo normal fault. Unlike previous models, the basement fold is interpreted as formed by a ramp from pre-Cretaceous basement to a double wedge fault probably preceded by a thin-skinned bedding plane thrust fault. A new 1D burial model …

Optimization Study Of An Image Classification Deep Neural Network, Rose Ault

Honors Projects

Machine Learning is an important and growing field within Artificial Intelligence. It is particularly useful in situations where developing an algorithm to perform the task in a conventional way would be extremely difficult. Instead of being programmed specifically to complete a task, a program embodies a trained model that can recognize patterns present in given example data, and is able use that model to make predictions on future data. Neural networks are a prominent example of machine learning models used for this purpose. Neural networks are models that are based on how brains work, with massive numbers of connected processing …

Enhanced Carrier Transport By Transition Metal Doping In Ws2 Field Effect Transistors, Maomao Liu, Sichen Wei, Simran Shahi, Hemendra Nath Jaiswal, Paolo Paletti, Sara Fathipour, Maja Remskar, Jun Jiao, Wansik Hwang, Fei Yao, Huamin Li

Physics Faculty Publications and Presentations

High contact resistance is one of the primary concerns for electronic device applications of two-dimensional (2D) layered semiconductors. Here, we explore the enhanced carrier transport through metal–semiconductor interfaces in WS₂ field effect transistors (FETs) by introducing a typical transition metal, Cu, with two different doping strategies: (i) a “generalized” Cu doping by using randomly distributed Cu atoms along the channel and (ii) a “localized” Cu doping by adapting an ultrathin Cu layer at the metal–semiconductor interface. Compared to the pristine WS₂ FETs, both the generalized Cu atomic dopant and localized Cu contact decoration can provide a Schottky-to-Ohmic contact …

A Proposed Taxonomy For General Aviation Pilot Weather Education And Training, John M. Lanicci, Thomas A. Guinn, Jayde M. King, Beth Blickensderfer, Robert Thomas, Yolanda Ortiz

Journal of Aviation/Aerospace Education & Research

As General Aviation (GA) safety continues to remain a focus of the aviation community, GA pilot weather education and training continues to be an active area of interest within the research community. This study introduces a taxonomy for organizing GA pilot weather education and training materials that was originally conceived as part of the FAA’s Weather Technology In the Cockpit research program. The taxonomy is built upon three main knowledge categories, or tiers:1) Weather Phenomena (which includes hazards); 2) Weather Hazard Products; and 3) Weather Hazard Product Sources and their Application. The concept behind the categorization is to link knowledge …

The State Of Technologies And Research For Energy Recovery From Municipal Wastewater Sludge And Biosolids, Zhongzhe Liu, Brooke K. Mayer, Kaushik Venkiteshwaran, Saba Seyedi, Arun S.K. Raju, Daniel Zitomer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Wastewater resource recovery facilities produce wastewater solids that offer potential for energy recovery. This opinion article provides a perspective on state-of-the-art technologies to recover energy from sludge (unstabilized wastewater residual solids) and biosolids (stabilized wastewater solids meeting criteria for application on land). The production of biodiesel fuel is an emerging technology for energy recovery from sludge, whereas advancements in pretreatment technologies have improved energy recovery from anaerobic digestion of sludge. Incineration is an established technology to recover energy from sludge or biosolids. Gasification, and to a greater extent, pyrolysis are emerging technologies well-suited for energy recovery from biosolids. While gasification …

Inelastic Behavior And Seismic Design Of Multistory Chevron-Braced Frames With Yielding Beams, Charles W. Roeder, Andrew D. Sen, Hayato Asada, Sara M. Ibarra, Dawn E. Lehman, Jeffrey W. Berman, Keh-Chyuan Tsai, Ching-Yi Tsai, An-Chien Wu, Kung-Juin Wang, Ruyue Liu

Civil and Environmental Engineering Faculty Research and Publications

Chevron or inverted V-braced frames offer numerous architectural and structural advantages, but the current special concentrically braced frame (SCBF) seismic-design requirements in the American Institute of Steel Construction (AISC) Seismic Provisions for Structural Steel Buildings lead to deep, heavy chevron beams; as a result, few chevron SCBFs are built today. Recent research on single-story chevron SCBFs demonstrated that beam yielding can be advantageous at higher demand levels, and design for large, inelastic unbalanced brace-force demands may still result in acceptable seismic performance. However, this prior research did not consider the response of multistory frames. In particular, questions remain as to …

Scenario-Based Strategic Planning For Future Civil Vertical Take-Off And Landing (Vtol) Transport, Woojin Choi, Steven Hampton

Journal of Aviation/Aerospace Education & Research

Rapid evolvement of the vertical take-off and landing (VTOL) technology in conjunction with recent robust R&D has demonstrated the technical feasibility of the civil VTOL system as a short-haul mass transit mode. Its combined benefits of a helicopter and a turboprop into one aircraft is expected to become an effective remedy for congested air traffic and difficulties with airport expansions in the metropolitan areas along with the potential benefit to improve accessibility to population centers and remote areas where conventional aircraft cannot access.

In this study, based on a the Political, Economic, Social, Technological, Environmental, and Legal (PESTEL) factors and …

Public Acceptance Of Ai Technology In Self-Flying Aircraft, Sarah M. Talley

Journal of Aviation/Aerospace Education & Research

The research article includes a literature dissection on the topics of public acceptance of automated vehicles, including self-driving cars and unmanned aerial vehicles. Information reviewed will be applied to the potential future application of self-flying aircraft. The use of the Technology Acceptance Model is reviewed for application of public acceptance studies. Contributing factors commonly observed include perceived ease of use, perceived usefulness, perceived risk and environmental benefits. Additionally, trust in automated technology for decision-making is reviewed. Research is based on existing studies of public acceptance in similar technologies and is applied to the likely public acceptance of self-flying aircraft.

Design, Construction And Testing Of A 3-Component Force Balance For Educational Wind Tunnels In Undergraduate Aerodynamics, Milan Tomin, Marco Scipioni, Benjamin Gatti

Journal of Aviation/Aerospace Education & Research

This article is focused on providing detailed instructions on how to build and use a force balance for educational wind tunnels. The article’s objective is to encourage undergraduate students in underfunded programs to engage in the field of aerodynamics. The discussed force balance represents an affordable device that only requires basic components like Arduino board, a servo motor, and acrylic and aluminum as construction materials. A simple data collection example is included at the end of the article showing that this simple force balance can collect meaningful data about lift, drag, and moment coefficient of a tested airfoil.

How Do Surgeon Preferences And Technique Variances Affect Outcome?, Anastasia Axiopoulou, Caroline G. L. Cao, Katherine Lin Md, Keith Watson Md

Celebration of Undergraduate & Graduate Research, Scholarship, and Creative Activities Materials

The goal of the research project is to create a blue-print of a robot-assisted hysterectomy procedure to support design and evaluation of technology to enhance system performance. To create this blue-print, we will conduct a task analysis, model the cognitive task flow and decision making, and develop a simulation of the hysterectomy procedure. The surgical simulation will be used as a platform to train surgeons on robotic-assisted hysterectomies, as well as to assess learning and performance. Additionally, it will be used to design and develop techniques and novel technology to support surgeons in their performance of the surgery. Current research …

Identifying Easy Indicators Of Dementia, Swati Padhee, Tanvi Banerjee, Valerie L. Shalin, Krishnaprasad Thirunarayan

Celebration of Undergraduate & Graduate Research, Scholarship, and Creative Activities Materials

Alzheimer’s Disease (AD) is a degenerative chronic neurodegenerative disease that affects millions of people and whose care costs billions of dollars. There is growing evidence that variations in speech and language may be early indicators of dementia. One of the most initial symptoms of dementia is speech impairment, including difficulty in finding words and changes to the grammatical structure. These early indicators can be detected by having the patients perform a picture description task, such as the Cookie Theft task from the Boston Diagnostic Aphasia Examination. However, much of the state-of-the-art NLP for dementia has been limited due to the …

Measuring Nomophobia And Exploration Of Consequences And Comorbidities, Sarah Marie Fryman, William L. Romine

Celebration of Undergraduate & Graduate Research, Scholarship, and Creative Activities Materials

Excessive use of smartphones has coined the term “Nomophobia”, or fear of not being able to use your smartphone. For many, these devices have become an extension of ourselves, which raises hesitation on whether or not society has become addicted to smartphones. Specific diagnostic criteria for smartphone addiction have yet to be settled, and even appropriate to use the word “addiction” when describing excessive usage of smartphones is controversial.

We therefore explore utilize current measures to explore the symptoms of nomophobia and their hierarchy, as well as comorbidities including social anxiety, self-esteem, distracted driving and sleep quality. A total of …

Predicting Alcohol Withdrawal In Intensive Care Units, Reza Sadeghi, Tanvi Banerjee, William L. Romine

Celebration of Undergraduate & Graduate Research, Scholarship, and Creative Activities Materials

Alcohol use disorder is a common health issue in older adults who are facing depression caused by retirement, loss of a spouse, pain, and sleep problems. The prolonged, heavy alcohol ingestion will lead to high alcohol dependency such that cessation or reduction of using alcohol causes alcohol withdrawal syndrome (AWS) in roughly 4 to 72 hours after the last drink. During the initial 8 hours, patients face anxiety, insomnia, nausea, and abdominal pain. This condition is followed by high blood pressure, increased body temperature, unusual heart rate, and confusion. If this syndrome does not receive any treatment, the patients will …

Investigation Of Selective Laser Melting Fabricated Internal Cooling Channels, Colin Jack

Masters Theses

Channels where coolant is run to cool a system are common in injection mold tooling. Conventionally, these channels are machined into the mold. This has limited the design of mold cooling systems to the constraints of traditional machining processes, where straight circular channels machined from cast material are typical. The transfer of heat away from the part cavity into these cooling channels has a large effect on the cooling time of the injection mold cycle. In this investigation, laser powder bed fusion processes were used to create non-circular cooling channels. To compare cooling performance, elliptical and circular channels of equal …

Verification Of Effectiveness Of Spot-Heating Technique In Reducing Spread Of Weld Lines In Injection Molded Plastic Products, Shah Ashikul Abed Sakar

Masters Theses

In producing a plastic part in an injection molding machine many physical factors related to the machine, such as injection pressure, holding pressure, heater temperature, etc. play their roles in the overall quality of the produced part. There are many aspects of the quality of a plastic part, such as part strength, part dimensions, and part surface finish. If any of those aspects gets compromised, the part is considered to have some defects. Of all defects found in injection-molded plastic parts, one most common defect is the presence of weld lines.Weld lines are formed when the flow of the molten …

Numerical Investigation Of Leading-Edge Modifications Of A Naca Airfoil, Anisur Rahman Ikram

Masters Theses

A parametric investigation was carried out to understand the flow characteristics of tubercle airfoils and to determine the best approach and parameters for designing a tubercle airfoil. For this purpose, a straight edge base airfoil (NACA 4414) and several tubercle airfoils, by modifying the leading edge of the base airfoil, were created in SolidWorks and tested with Computational Fluid Dynamics (CFD) application software Star CCM+.

Alternative tubercle airfoil with elliptical bumps demonstrated superior post-stall performance when compared to their straight edge counterparts; their post-stall lift did not decrease drastically. However, their pre-stall lift coefficients were always lower than the base …

Transmission System For Wireless Charging In Three-Dimensional Space, Bradley Shirley, Amritpal Singh

Electrical and Computer Engineering Senior Theses

Current methods of wireless power transfer (WPT) limit the mobility and usage of a device when it is actively charging. Here, a three-dimensional wireless power transfer technique known as quasistatic cavity resonance (QSCR) is studied in arbitrary geometries and practical scenarios. Physical fabrications and simulations demonstrate the viability of QSCR along with techniques for lowering the resonant frequency to meet safety standards. Two methods of lowering the resonant frequencies are presented, one by changing the physical dimensions and the other by increasing the systems capacitance. It is shown that QSCR is a feasible option to wirelessly transfer power in a …

Maize Growth, Yield, Water Productivity And Evapotranspiration Response To Different Irrigation Methods And Amounts And Different Timing And Methods Of Nitrogen Applications, Ali T. Mohammed

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Declining the quantity and quality of freshwater resources in many parts of the world, including Midwestern USA, especially in the light of rapidly growing world’s population and changing climate, imposes significant and, in some cases imminent, challenges for producers, policy- and decision-makers to produce more yield with less water and other inputs, particularly in water scarcity regions.

There is not comprehensive previous research has quantified and evaluated coupled impacts of irrigation rates and nitrogen timing management strategies and their interactions on maize (Zea mays L.) productivity and its various attributed efficiency index metrics under different irrigation methods under the …

Net Energy Index: A New Way To Measure Energy Efficient Buildings, Dylan Suplee

Senior Honors Theses

Energy efficiency indexes are useful for providing tangible measurements of energy efficiency in buildings. Buildings use approximately 70% of all electricity in the USA. Using that energy efficiently has two primary benefits: limiting greenhouse gas emissions and reducing grid strain. Utilizing local renewable energy sources contributes to the same benefits. Currently, there is no index that considers renewable energy sources when measuring energy efficiency. Therefore, this paper proposes the Net Energy Index, which compares the net power usage of a building to the floor area of the building in order to determine energy efficiency. If renewable energy supplies power to …

Simuring: Making An Interdisciplinary Project Work, Christine Brandon, Polina Sabinin, Nicole Glen, Jennie Aizenman

Bridgewater Review

No abstract provided.

Effects Of Cholesterol In Stress-Related Neuronal Death—A Statistical Analysis Perspective, Maher A. Dayeh, George Livadiotis, Farzan Aminian, Kwan H. Cheng, James Roberts, Nikita Viswasam, Saber Elaydi

Engineering Faculty Research

The association between plasma cholesterol levels and the development of dementia continues to be an important topic of discussion in the scientific community, while the results in the literature vary significantly. We study the effect of reducing oxidized neuronal cholesterol on the lipid raft structure of plasma membrane. The levels of plasma membrane cholesterol were reduced by treating the intact cells with methyl-ß-cyclodextrin (MßCD). The relationship between the cell viability with varying levels of MßCD was then examined. The viability curves are well described by a modified form of the empirical Gompertz law of mortality. A detailed statistical analysis is …

Detailed Modeling Of A Small-Scale Turbulent Pool Fire, Bifen Wu, Somesh Roy, Xinyu Zhao

Mechanical Engineering Faculty Research and Publications

Turbulent pool fires have been studied as a canonical configuration in fire science with wide interest. A numerical study of a small-scale turbulent heptane pool fire is conducted in the present study to understand the interactions and coupling among turbulence, chemistry, soot, and radiation in pool fires. A Monte Carlo ray tracing based radiation solver, with line-by-line spectral models for five gaseous species and soot, is coupled with a fireFOAM-based reacting flow solver to describe the dynamics of the target fire. A 33-species skeletal mechanism is employed to describe the finite-rate chemistry. A two-equation soot model with C₂H …

Seismic Evaluation And Optimization Of Reinforced Concrete Multistory Building, Ahmed Abdallah

Morehead State Theses and Dissertations

A thesis presented to the faculty of the Elmer R. Smith College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Ahmed Abdallah in April of 2020.

Effect Of Frother Strength And Solids On Gas Dispersion In A Cavitation Sparger Measured By Electrical Resistance Tomography, Philip Holdsworth

Graduate Theses & Non-Theses

Gas dispersion in column flotation is critical for optimizing particle-bubble interaction and maximizing recovery. The effect of various flotation frothers on axial gas dispersion rates in a column flotation cell were measured using electrical resistance tomography (ERT). Tests included two-phase (gas-liquid) and three-phase (gas-liquid-solid) to determine the effect of mechanical parameters and the presence of solids on gas dispersion. Gas holdup can be measured using ERT and utilized in the determination of axial gas dispersion rate in the column. The ERT is constructed with two sensor planes making it possible to simultaneously capture gas holdup values at one cm and …

Digital Height-Measuring Sensor Device, Valerie Woo

Interdisciplinary Design Senior Theses

A digital height-measurement device (stadiometer) was developed in partnership with the Pediatric Wellness Group (PWG) clinic to improve the speed and accuracy of the height measurement process and address the discomfort and inefficiency issues of traditional physical height-measurement devices currently used in hospitals and clinics. The digital stadiometer uses sensor components to quickly and efficiently measure a patient’s height. One key need for accurate height measurements from this device is to ensure the device is level to the ground. Therefore, this project incorporated an accelerometer along with a “bubble level game” feature, which allowed the user to ‘self-level’ the device …

Design Of A Greywater-Fed Hydroponics System, Alex Estrada, Katya Fairchok, Andrew Feldmeth, Andrew Jezak

Interdisciplinary Design Senior Theses

To combat issues of local water insecurity, a hydroponics system was designed in partnership with LEAP 5 High School in Jane Furse, South Africa. Climate change, increasing human population, and continued environmental degradation all threaten access to clean drinking water. Approximately seventy percent of all freshwater is used for agriculture globally, thus threatening food security especially in developing countries where access to water is potentially volatile. The hydroponics garden system utilizes sustainable materials, a self-monitoring temperature controls system, and greywater input, to act as an educational tool for students and significantly reduce freshwater use compared to traditional, in-ground agriculture. An …

Applications Of Image Processing Techniques And Spatial Data Analytics For Pressure Mapping Analysis, Joan Yamil Martinez

Dissertations

The technological advancements in sensors, monitoring systems, and tracking devices are changing how we study our environment; big data sets are becoming more and more prevalent due to the increase of information gathered with ease. One system benefiting from these technological improvements is pressure mapping technology, an easy-to-use and cost-effective solution for assessing contact pressure distributions.

Pressure mapping systems generally produce data sets of very large volume, especially when used for continuous tracking and monitoring, and are widely used for research in fields of ergonomics, sports, industries, and health disciplines. Pressure mapping systems are particularly important in the study of …

Indirect Structural Connectivity As A Biomarker For Stroke Motor Recovery, Miguel Renato Sotelo Munoz

Dissertations (1934 -)

In this dissertation project, we demonstrated that diffusion magnetic resonance imaging and measures of indirect structural brain connectivity are sensitive to changes in fiber integrity and connectivity to remote regions in the brain after stroke. Our results revealed new insights into the effects local lesions have on global connectivity—in particular, the cerebellum—and how these changes in connectivity and integrity relate to motor impairment. We tested this methodology on two stroke groups—subacute and chronic—and were able to show that indirect connectivity is sensitive to differences in connectivity during stroke recovery. Our work can inform clinical methods for rehabilitating motor function in …

Heuristic-Based Threat Analysis Of Register-Transfer-Level Hardware Designs, Wesley Layton Ellington

Electrical Engineering Theses and Dissertations

The development of globalized semiconductor manufacturing processes and supply chains has lead to an increased interest in hardware security as new types of hardware based attacks, called hardware Trojans, are being observed in industrial and military electronics. To combat this, a technique was developed to help analyze hardware designs at the register-transfer-level (RTL) and locate points of interest within a design that might be vulnerable to attack. This method aims to eventually enable the creation of an end-to-end design hardening solution that analyzes existing designs and suggests countermeasures for potential Trojan attacks. The method presented in this work uses a …

Effect Of Multinational Projects On Engineering Students Through A Summer Exposure Research Program, Mehul S. Raval, Tolga Kaya

School of Computer Science & Engineering Faculty Publications

This paper studies and quantifies the impact of active learning experienced through multinational projects. The hypothesis was engineering education delivered through Active Learning in multicultural environment improves student competencies. The investigation captures the impact of international exposure program in developing global competencies of the modern engineer. The paper shows positive trends in the development of domain and life skills of engineering students. Post-survey after six months of completion of the program revealed that the program was valuable to students and their motivation increased.