Engineering Commons^™

Conducted And Radiated Emi Measurements Of Parallel Buck Converters Under Varying Spread Spectrum Parameters, Elena Postupalskaya, Nathan Wang

Electrical Engineering

The Conducted and Radiated EMI Measurements with Parallel Buck Converters Under Varying Spread Spectrum Parameters research senior project aims to explore the effects from Spread Spectrum Frequency Modulation (SSFM) on the input electromagnetic interference (EMI) or noise of a switching power supply, specifically with LM53601MAEVM hardware. The input EMI is important as the main input bus needs to be clean to provide a reliable source for other sensitive devices connected to it. SSFM can replace a conventional EMI filter and save weight, space, and cost. This project provides a basis in terms of the impacts of variable SSFM in simulation …

Pulsed Electric Field System Development For Algae Biofuel Extraction, Juan David Gonzalez Aguayo, Aspyn Bessler

Electrical Engineering

The search for sustainable alternatives to fossil fuels proves necessary due to the effects fossil fuels have on Earth’s environment. These alternatives must have a minimum ecological footprint and cause no long-term harm to the environment. An environmentally friendly fuel is necessary to usher in a generation of renewable green energy.

The production of algae refined biofuels becomes a possible solution to this growing issue. Algae absorb CO2from the atmosphere during their reproduction and growth cycles, yielding a positive environmental impact. As the biofuel is refined and becomes suitable for use, the combustion of the finished fuel generates an equal …

Energy And Economic Losses Due To Soiling On Utility Scale Pv Systems To Guide Timing Of Cost Effective Cleaning, Sophia Mcmillin Stockburger, Vicente Jesus Rios

Electrical Engineering

The purpose of this senior project is to develop and recommend a cleaning schedule for Goldtree Solar Farm that is both economically beneficial and an efficient use of cleaning for the client. Solar farms can have various factors that influence the cleaning schedule such as weather behavior, time of the year, soiling, and other factors. Through this senior project, the goal is to assess these factors effect on the solar farm to produce a cleaning schedule that will maximize energy production, maximize profits, and prevent insignificant cleaning

This analysis is motivated by defining and promoting the benefits of regular maintenance …

Polyone Smartphone, Joshua Zalmanowitz, Chi Nguyen, Gerome Cacho, Chris Lim

Electrical Engineering

The Poly One Smartphone is a student designed smartphone built to explore the implementation of 5G, provide a hardware solution to ensure personal information security and privacy, and provide longer battery life. The key features of this smartphone include but are not limited to a main cpu, some form of network connectivity in the form of Wi-fi or Cellular Data, calling functionality, a rechargeable battery that works with common power connection protocols, and compatibility with popular applications.

High Efficiency Rf Amplifier Design, Evan W. Johnson

Electrical Engineering

High efficiency RF power amplifiers are key to the operation of modern wireless systems. From reducing power consumption at base stations to increasing battery life in handsets, high efficiency amplifiers help system designers to meet key performance criteria for their customers. The advent of the Internet of Things and 5G will lead to mass proliferation of battery operated wireless devices, increasing demand for high efficiency systems. In this project, a high efficiency 4W narrowband PA operating at 1GHz is designed, built and tested for the IMS2020 high efficiency power amplifier (HEPA) design competition. Emphasis is placed on achieving maximum power-added …

Design And Development Of Laboratory Single-Axis Pv Module Tracker, Helen A. Rice, Delaney Berger, Avishek Maitra

Electrical Engineering

Solar energy is an integral part of the renewable energy industry. Advanced solar farms actively track solar movement and update solar panel angles to maximize the system’s output power. Cal Poly boasts its own Solar Farm that features a single-axis tracking system. Single-axis tracking aims to get panels as close to perpendicular as possible given the panel arrangements and given the time of year. Single-axis tracking is a more robust measurement and tracking option. Single-axis tracking systems usually only have East-West panel arc movement, following the sun’s rotation. Dual-axis trackers have both East-West and North-South panel arc movements. Dual-axis systems …

Efficiency Optimization Of Miso Converter, Gabriel Leonides, Christopher S. Peters, Lauren N. Rotsios

Electrical Engineering

In recent years, there has been a rapidly growing need for sustainable energy sources. This need comes from the increasing threat of climate change, significant population growth, as well as the effort to bring electricity to rural and underdeveloped areas across the world. The DC House project at Cal Poly aims to address these issues. The Multiple Input Single Output (MISO) converter is an integral part of the DC House project. The MISO converter is a system that connects multiple power sources to a DC bus. This allows the DC House to be powered by multiple types of renewable energy …

Engineering A Grapevine Pruning Training Tool For Use In Educational And Professional Environments, Catherine Anne Thornbury

Electrical Engineering

This report documents the design of a field-safe and portable tool that helps field hands identify how many wine grape nodes to prune per cane. This practice allows for a more bountiful harvest. The device indicates to the worker whether to leave one, two, or three nodes on a cane. The device is attachable to a set of industry-standard shears to allow for efficient and cost-effective pruning.

The device add-on can withstand a typical 8-hour workday and is able to be used in bright sun, clouds, and rain. Additionally, the device is able to differentiate between small, medium, and large …

Automated Score Tracking Cornhole Game, Mondona Behroozian, Harrison Overturf, Daniel Hurwitz

Electrical Engineering

Automated Score Tracking (AST) for Cornhole is a wireless system that allows for ease of game flow. Cypress Semiconductor’s new Bluetooth Low Energy (BLE) technology inspired the idea. The CYBT-213043-Mesh evaluation module allows for users to receive real time score data, from round to round. The CYW20819 Bluetooth Module located on the mesh evaluation board integrates the use of components on the module to reduce the use of external components. The Bluetooth module allows for the two game boards to communicate scores for each team per round. The system first needs to accurately award points to each team in order …

Post-Quantum Encryption Benchmark, Jordan David Churi

Electrical Engineering

Recent advancements in quantum computing bring the weaknesses in modern RSA encryption to the foreground. Shor's algorithm, though not implementable on today's quantum computers, shows that RSA asymmetric key encryption is not secure for the coming future. This flaw in the security has prompted the National Institute of Standards and Technology (NIST) to start a search for a new post-quantum encryption algorithm that will be resistant to future quantum computers. There are several implementations of preforming this encryption scheme. One promising technique is using lattices in an application called ring Learning with Errors (rLWE). Several algorithms have been submitted to …

Electric Motorcycle Lithium-Ion Battery System, Amman Fasil Asfaw, Donald J. Alexander

Electrical Engineering

This project entails the processes of design, construction, implementation, and testing of a lithium-ion battery system, including a battery management system, dedicated to converting a 1999 Honda XR100R motorcycle into a fully functional electric motorcycle. The battery system powers the motorcycle with enough voltage and amperage to sustain the needed power capability for a reasonable range. Providing an estimate of the voltage needed, the two largest loads, the DC motor and controller, draw about 48 to 60 volts from the battery for proper operation. Additionally, different aspects of the design also ensure safe operation, correct sizing, and maximum lifetime of …

Electrocardiographic (Ecg) Biometric Identification, Ryan Morosa, Charbel Ghantous

Electrical Engineering

Electrocardiography (ECG) is being used a lot more in biometrics for applications where protection of privacy is important. Other methods like facial recognition can be falsified by using different colored contacts to manipulate identification. For this reason, ECG is a viable option for biometric identification since it relies solely on the heartbeat to classify characteristics of an individual. The Pan-Tompkins method was used for feature extraction, and both ELM and correlation were used for classification. ELM through MATLAB achieved an average accuracy of 85%. Correlation achieved an average accuracy of 89.2%.

Dc Treasure Box, Michael A. Derrenbacher

Electrical Engineering

An all in one DC resource would enable electronics students to prototype circuits for labs and projects without the need for the lab equipment present on campus. The labs on campus can be physically far, closed, or overcrowded, preventing students from accessing the equipment. Roughly 75% of upper division electrical engineering students do not own power supplies, with even fewer students owning a source measurement unit (SMU). There is a significant need for a product capable of providing standard lab equipment functionality. The functionally this project provides are positive and negative DC power supplies, 4-Quadrant SMU, analog inputs and outputs, …

Math Anxiety: Engineering Technology Students Problem Solving Through Rational Or Experiential Context, Anne M. Lucietto, Meher Rusi Taleyarkhan, Natalie Hobson, Therese M. Azevedo

School of Engineering Technology Faculty Publications

Math anxiety is a pernicious problem. The issue manifests in a variety of ways, some avoid math completely, while others enact coping skills to avoid the use of math. This study surveys students who are pursuing Engineering Technology degrees and delves into the tendencies of the students and how they utilize certain types of problem-solving techniques. The survey utilized the instrument Cognitive-Experiential Self Theory (CEST) [1]. The survey will help to learn the extent to which the students rely on the rational and experiential context of their lives to answer technical questions. The study is intended to enlighten educators and …

Professional Women Identify Their Professional And Personal Needs, Anne M. Lucietto, Diane L. Peters, Meher Rusi Taleyarkhan, Shelly Tan

School of Engineering Technology Faculty Publications

Professional women in various fields often express issues they encounter in being able to access quality materials to support professional and personal needs, as well as work-life balance. By studying a variety of modes through which these materials are generally obtained, including conference participation, informal communication via social media, and utilization of networking opportunities, several gaps were identified in available support for professionals. Professionals from various backgrounds were also surveyed in order to better identify their needs in terms of career development. Distributed through a variety of social networks including Facebook, Twitter, and LinkedIn, as well as the Indiana Secretary …

Characterizing A Gaucher’S Disease Model For The Evaluation Of Novel Exosome-Based Enzyme Replacement Therapy, Annie Brown

Bioengineering Master's Theses

Gaucher’s disease is a rare genetic lysosomal storage disorder. People suffering from Gaucher’s disease do not have functional beta-glucocerebrosidase (GBA), which results in toxic build-up of undegraded substrates within the cell. Currently, patients living with this disease rely on biologics to reduce their symptoms, however, they require frequent transfusions and are incapable of crossing the blood brain barrier (BBB) to address neurologic symptoms of the disease. To evaluate the efficacy of novel biologic therapeutics, a human Gaucher’s disease model is required. Here, we have utilized near-haploid human cells (Hap1) modified via CRISPR-Cas9 to model Gaucher’s disease in vitro. These cells …

Spectroscopic Measurements Of Dissolved O3, H2o2 And Oh Radicals In Double Cylindrical Dielectric Barrier Discharge Technology: Treatment Of Methylene Blue Dye Simulated Wastewater, Emile Salomon Massima Mouele, Jimoh O. Tijani, Milua Masikini, Ojo O. Fatoba, Chuks P. Eze, Chionydua T. Onwordi, Myo Tay Zar Myint, Htet Htet Kyaw, Jamal Al-Sabahi, Mohammed Al-Abri, Sergey Dobretsov, Katri Laatikainen, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

Advanced oxidation technologies (AOTs) focusing on nonthermal plasma induced by dielectric barrier discharge are adequate sources of diverse reactive oxygen species (ROS) beneficial for water and wastewater treatment. In this study, indigo, peroxytitanyl sulphate and terephthalic acid methods were used to approximate the concentrations of O₃, H₂O₂ and OH produced in a double cylindrical dielectric barrier discharge (DCDBD) plasma configuration. The effect of pH and scavengers as well as the amount of chemical probes on the generation of oxidants was investigated. The efficiency of the DCDBD reactor was further evaluated using methylene blue (MB) as …

Structuring Student Success: Incorporating A Genre-Based Pedagogical Method To Improve A Strength Of Materials Laboratory Manual, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

In this research study the authors incorporated a pedagogical technique to improve a strength of materials lab manual. The conceptualization and subsequent development of a student friendly lab manual resource emerged from students’ difficulty in understanding the following areas: introduction to experiment, procedures, calculations, and relevancy to class content. Based on a survey conducted before lab manual improvements and modifications, mechanical engineering students expressed high dissatisfaction with the written structure of the manual and felt they spent too much time understanding lab procedures, deciphering what equations to utilize to complete their analyzes, and completing the report. As such, the authors …

Finding Balance: Examining The Impact Of Grades On Engineering Students' Well-Being, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

The authors conducted a preliminary research study to understand the emotional and academic impact grades have on engineering undergraduate students. Grades in higher education have become a priority for students to secure internship opportunities, post-graduation employment, and graduate school acceptance. However, students’ desire to attain high grades in engineering disciplines may lead to negative effects such as additional anxiety and increased mental exertion, physical exhaustion, and overall lack of work-life balance. A survey was conducted with a cohort of 45 students to understand their perspective on grades before, during, and at the end of the semester, and their responses to …

Jet Ejection Following Drop Impact On Micropillared Hydrophilic Substrates, Anayet Ullah Siddique, Marcus Trimble, Feng Zhao, Mark M. Weislogel, Hua Tan

Electrical and Computer Engineering Faculty Research & Creative Works

Droplet-wall interactions are well known to generate a wide variety of outcomes such as spreading, splashing, receding, jetting, and rebounding. In this paper, we focus on the evolution of jets that form during the recoil of impinging drops on partially wetting hydrophilic substrates composed of cylindrical micropillars. The impact of the millimeter-sized drops of water-glycerol mixtures on the micro structured hydrophilic substrates is investigated by high-speed video photography. Impact velocity and fluid viscosity are varied to characterize the jets. Wetting angles are maintained in the range of 43.6° ≤θ≤51.4°. A regime map is constructed to convey the jet behavior at …

Software-Based Monitoring And Analysis Of A Usb Host Controller Subject To Electrostatic Discharge, Natasha Jarus, Antonio Sabatini, Pratik Maheshwari, Sahra Sedigh Sarvestani

Electrical and Computer Engineering Faculty Research & Creative Works

Observing, understanding, and mitigating the effects of failure in embedded systems is essential for building dependable control systems. We develop a software-based monitoring methodology to further this goal. This methodology can be applied to any embedded system peripheral and allows the system to operate normally while the monitoring software is running. We use software to instrument the operating system kernel and record indicators of system behavior. By comparing those indicators against baseline indicators of normal system operation, faults can be detected, and appropriate action can be taken. We implement this methodology to detect faults caused by electrostatic discharge in a …

Statistical Eye Diagram Analysis Based On Double-Edge Responses For Coding Buses, Xiuqin Chu, Wenwu Wang, Jun Wang, Xiangyu Dai, Jun Fan, Yushan Li

Electrical and Computer Engineering Faculty Research & Creative Works

For high-speed coding buses, it is a great challenge to evaluate the eye diagram accurately. Assuming that all data bits are independent and have uniform probabilities as previous estimation methods have done is not valid. In this paper, a new statistical method is proposed to estimate the worst-case eye diagrams and bit-error-rate (BER) eye diagrams for coding buses. The probability distribution of coded bus bit vectors is modeled based on the coding rule constraints. Then, actual worst pattern and eye diagram calculation is derived based on bus bit transition probabilities and double-edge responses. In order to validate the method, a …

Rugged Linear Array For Iot Applications, Lidong Chi, Zi Bin Weng, Shu Meng, Yihong Qi, Jun Fan, Weihua Zhuang, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

In this article, a rugged linear array is proposed for covering both the LTE and 5G bands with an intermediate gain. The antenna is composed of a driven element, a set of directors, and a set of reflectors, where the excited element is a wideband high-efficiency electromagnetic structure (WHEMS) and the parasitic elements consist of metal rods. To achieve a rugged design, similar to the classic Yagi antenna, all of the elements should be conductively connected, so that it can be welded. The weldable mechanism is started on the driven radiating element. In addition, a balun is introduced in the …

A General And Systematic Method To Design Neutralization Lines For Isolation Enhancement In Mimo Antenna Arrays, Min Li, Lijun Jiang, Kwan Lawrence Yeung

Electrical and Computer Engineering Faculty Research & Creative Works

A general and systematic approach is the first time proposed in this paper to design the neutralization line (NL) for isolation enhancement in multiple-input multiple-output (MIMO) antenna arrays. Each NL consists of a metal strip and a reactive component attached at its middle position. It is connected with every two antenna radiators to generate an additional coupling path against the original antenna coupling for isolation enhancement. A general network model that leads to a systematic design procedure is developed to meet the required isolation criteria. Three practical examples are presented and used to verify the proposed NL-based decoupling technique (DT). …

Process-Dependent Composition, Microstructure, And Printability Of Al-Zn-Mg And Al-Zn-Mg-Sc-Zr Alloys Manufactured By Laser Powder Bed Fusion, Le Zhou, Holden Hyer, Saket Thapliyal, Rajiv S. Mishra, Brandon Mcwilliams, Kyu Cho, Yongho Sohn

Mechanical Engineering Faculty Research and Publications

Additive manufacturing (AM) technology for metallic alloys such as laser powder bed fusion (LPBF) brings tremendous opportunities for development of novel alloys specifically designed for AM that would desensitize the inherent process variability and requires a refined understanding of processing–structure–property relationship that would contribute to future alloy development. In this study, two different alloys, Al-6Zn-2Mg and Al-6Zn-2Mg-0.7Sc-0.3Zr in wt. pct, representing traditional and AM-specific novel aluminum alloys, respectively, were manufactured by LPBF technique using pre-alloyed gas atomized powders. The Al-Zn-Mg ternary alloys exhibited cracks at various LPBF processing parameters, primarily along the grain boundaries of the large columnar grains that …

Adaptive Robotic Chassis (Arc), Darran Casey, Ryan Ku, Noah Kane Manuel, Isabella Morales, James Reimer, Lavelle Simmons

Interdisciplinary Design Senior Theses

The ARC is a width adjusting agricultural robot and accommodates auxiliary functions for supporting crop production and maintenance. Easily interchangeable payloads and components provide a modular solution to perform focused crop surveying functions with the potential for herbicide distribution, weeding, and harvesting while driving through varying crop rows. The potential auxiliary functions will be implemented by future teams with this year's effort being put toward finishing the physical chassis. The final product was successfully designed to weigh approximately 600 pounds targeting rolling speeds of0.90 fps to 2.30 fps with proof of concept shown in testing consisting of chain drive attached …

Multi-Rate Simulation Based On Explicit-Implicit Hybrid Integration, Bingda Zhang, Chen Ming, Wang Xiao, Lanyu Wang

Journal of System Simulation

Abstract: A multi-rate simulation method based on explicit-implicit hybrid integration algorithm for the grid-connected photovoltaic system which included power electronic devices with a variety of switching frequency was put forward. Inductances and capacitances were used to divide the grid-connected photovoltaic system into subsystems. A multi-rate interface was put forward to satisfy the request of real time. The stability criterion of the multi-rate simulation algorithm was put forward. FPGA was used as a platform to build the digital grid-connected photovoltaic system. The hardware in loop test for DC/DC and DC/AC converter controllers was conducted on this platform to verify the accuracy …

Weighted Online Estimation Of Soc Based On Adaptive Battery Model, Haohao Sun, Tinglong Pan, Dinghui Wu

Journal of System Simulation

Abstract: Aiming at the problem that the traditional lithium battery model has poor adaptive ability in SOC estimation and the local estimation accuracy of the single SOC estimation algorithm is low, online identification of model parameters with Multi-Innovation Stochastic Gradient algorithm and method of weighted online estimation of SOC was proposed. The results of lithium-ion battery model parameters online identification updated in real time, realizing lithium-ion battery model adaptive. Aiming at the estimation of SOC, a method of weighted online estimation method based on the PI (proportion and integral) regulator's OCV combined with Ah (an integral method) was proposed. Weights …

Multi-Variable Modeling Research For Main-Steam Temperature Of Power Station Boiler Based On Improved Differential Evolution Algorithm, Li Qin, Zhang Hao, Daogang Peng, Yibo Guo, Nianlong Wang, Yuzhen Sun

Journal of System Simulation

Abstract: By analyzing the factors which affected the main-steam temperature, a multi-variable model was introduced to overcome the bad result of single variable cascade control. An improved differential evolution algorithm was proposed including mutation strategies random selection, crossover ratio and mutation ratio adaptive adjustment, which was used for closed-loop identification of main-steam multi-variable transfer function model. The principle and method how to obtain valid identification data from power plant distributed control system history database was introduced, and the data from some 1 000 MW coal-fired power plant was used to identify and verify the main-steam temperature multi-variable model, …

Research On Wavelength Routing Algorithm Based On Multi-Service In Satellite Optical Networks, Qingli Liu, Junfei Yao, Zhiguo Liu

Journal of System Simulation

Abstract: An optical wavelength routing algorithm for satellite networks based on multi-service was proposed, in order to solve the problem of low utilization rate of wavelengths, slow convergence and low efficiency of satellite optical networks. In this algorithm, it divided the area of the satellite network and updated the link in the area to improve the convergence speed of algorithm. Different services were assigned different wavelength sets to satisfy requirement of different service. According to the initial link weight, which included wavelength remain number and transmission delay, it changed link weight dynamically to achieve network load balancing and rational use …