Engineering Commons^™

Eeg Midi Controller, Jack Ellison, Eric Bettencourt

Electrical Engineering

One of the greatest challenges for aspiring musicians is the amount of practice and commitment required to become fluent in a traditional instrument. Taken a step further, individuals who have impaired motor skills may be incapable of even executing the physical demands required to practice one. While this device does not create notes directly from a user's brain waves, exploring and designing EEG based musical hardware capable of using a person’s thoughts to control musical devices could pave the way for greater advances. It can also open many doors into psycho-acoustic research, treating the mind's response to hearing music and …

The Characterization Of Effective Electromagnetic Fields On The Safety And Quality Of Low-Moisture Foods (Effs) - Prototype Device Development, Joe G. Sandoval

Electrical Engineering

Contamination of low-moisture foods including flour, wheat grain, baby formula, and more, have increasingly become a concern due to sanitizing challenges. While industrial food processors have long used RF heating to sanitize mass quantities, an equivalent consumer device is absent from the market today. The Characterization of Effective Electromagnetic Fields on the Safety and Quality of Low-Moisture Foods (EEFS) project is an interdisciplinary effort to develop an RF heating consumer device to sanitize low-moisture foods.

A prototype device was designed to sanitize low-moisture food items using RF heating acceptable for commercial or consumer applications.

Artificial Neural Network To Detect Alzheimer's In Mri Scans, James Alden Poirier, Michael Gary Tuttle

Electrical Engineering

Alzheimer’s Disease ranks (AD) as one of the most common diseases in America. Currently, detecting Alzheimer’s Disease relies upon reported symptoms, however changes in the brain can manifest years or decades before symptoms appear. In recent years, researchers have successfully utilized Artificial Neural Networks (ANN) for a variety of image classification tasks. Here, we train an ANN to detect Alzheimer’s Disease using magnetic resonance imaging (MRI) brain scans. Giving an MRI to both a neural network and a doctor will allow the doctor to be more confident in their answer, as well as double-check their answer with an objective report …

Resilience Within And Resilience Without: Mindfulness And Sustainability Programming Using An Embedded Engineering Librarian Approach, Catherine Wong, Cynthia Carlson

Civil Engineering Faculty Publications

Students are facing an increasingly chaotic world in part due to global climate change and environmental degradation, causing rising levels of stress and anxiety. Mindfulness and sustainability programs were initiated over three years by a faculty-librarian collaborative team to assist first-year engineering students in building environmental literacy and personal resilience skills. The faculty-librarian team established in class and out of class themes, games, assignments, and programming using an embedded librarian approach. Sustainability programming included environmental movie nights with curricular links and conversations about climate change using the World Café methodology. These activities allowed students time outside of class to engage …

Telemedicine: An Iot Based Remote Healthcare System., Mohammad Abdellatif, Walaa Mohamed

Electrical Engineering

This paper proposes a remote healthcare system which is referred to as Telemedicine. Telemedicine is a platform that establishes a connection be-tween the patient and the doctor. This platform belongs to the internet of medical things (IoMT) by enabling multiple medical sensors to connect to a server either using multiple communication technologies such as Wi-Fi, Bluetooth or GSM technologies. The system collects data from several sensors and sends them using one of the aforementioned technologies using an Arduino Board, while the inter-face is made with matlab and C#. Additionally, a comparative study between the three communications technologies used to connect …

Analiza E Sektorit Energjetik Në Kosovë, Valdrin Arifi

Theses and Dissertations

Qëllimi i punimit të kësaj teme të diplomës në nivelin bachelor , është përshkrimi i sektorit të energjisë duke marrur parasysh gjitha burimet të cilat egzistojn në vendin tonë duke filluar nga ato fosile deri tek burimet e ripërtrishme.

Një nder faktoret kryesor të zhvillimit ekonomik të një vendi është energjia elektrike. Furnizimi me energji elektrike në Kosovë mbështetet pothuajse plotësisht në energjinë e prodhuar nga termocentralet (97%) , përkatësisht Kosova si lënd të parë përdor rezervat e linjitit , sigurimi i furnizimit të qëndrueshëm , cilësor , të sigurtë dhe të pandërprerë me energji elektrike është një prej kushteve …

Cad For College: Switching To Onshape For Engineering Design Tools, Kate N. Leipold

Presentations and other scholarship

Engineering Design Tools aims to teach students to use industry standard CAD tools in the context of a design and build course. Previous versions of the course have been taught utilizing Creo Parametric. To alleviate install concerns, distributed team work, and the challenges of learning Creo in a short time frame, the class transitioned to utilizing Onshape. To quote the Onshape website - “Onshape is the first CAD system built for teams. Students can work in groups and edit models together simultaneously. Teachers can distribute assignments, review work and give feedback with ease. Additionally, Onshape keeps a complete history of …

Heavenly Bodies Rsvp, Justin Tyler Spitzer, Allison Jean Turnbaugh, Jack William Boulware, Braden Alex Lockwood

Mechanical Engineering

The purpose of the Heavenly Bodies RSVP project was to design and fabricate planet props, as well as a mechanism by which they could be raised and lowered in California Polytechnic State University’s Pavilion theater. The project team was comprised of four fourth year mechanical engineering students: Allison Turnbaugh, Braden Lockwood, Jack Boulware, and Justin Spitzer. We conducted extensive research to determine the ideal solution for the design problem brought to us by our sponsor. In our analysis, we discovered that the most important aspects of our design were the absolute reliability of the system, fire retardant material selection, and …

Cal Poly Microgrid Fixed Pv Array, Christopher L. Ewert, Justin R. Syracuse, Donald A. Syracuse, Jason M. Kehl

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University of San Luis Obispo would like an adjustable, fixed angle solar panel mount to help educate students on basic solar energy principles. Our team has developed a unique sawhorse design utilizing ideation techniques and design selection tools. The selected design allows for multiple panel adjustability and control of both azimuth and tilt angle. Safety concerns are addressed with action plans to mitigate risk. Concept prototypes to justify gearbox functionality and subsystem cohesion was utilized to reduce manufacturing issues. Manufacturing began in March 2020 and proceed through until the end of the …

Elevate Dental, Connor Merrick, Everett Johnson, Jonah Holbrook

Mechanical Engineering

During a dental procedure, patients are often required to have a bite block placed in their mouths to keep them open for the duration of their procedure. These can be very uncomfortable for patients due to lack of properly-fitting sizes. This project presents an alternative fully adjustable bite block that is affordable, comfortable, and easy to use for dental personnel.The bite block is a two piece side loading design that uses interlocking teeth to supply a range of five sizes.

Automated Drone Calibration System, Jackie Kelly Jong-Mee Paik, Zach Nathan Richter, Tyler Wilson Van Den Berg, Ryan Alexander Zhan, Matthew Ward Carlson

Mechanical Engineering

The final design review of the Inspired Flight Calibration Team senior project will detail the process used to complete a verification prototype of a drone calibration device and discuss lessons learned and suggestions for improving this device. Going from brainstorming and conceptual prototyping all the way through verification prototyping and testing, we were able to design a gyroscopic device that met Inspired Flight’s needs for the flight sensor calibration of their drones. The mechanical design involved comprehensive CAD models and hands-on manufacturing. The mechatronics side of the project worked heavily with electrical wiring and writing custom software to communicate and …

Vibration Isolation System, Bradley Y. Kwan, Bailey Groh, Max Wu, Nicole Yen

Mechanical Engineering

The Vibration Isolation System Senior Project is a collaborative group project between its sponsor, Maxar Technologies, and a team of students from Cal Poly - SLO to effectively design, manufacture, and test a structural assembly for satellites, isolating vibrations during launch and orbit conditions. After initial sponsor contact, requirements and needs were set which dictated deliverables for the senior project group. The group performed analyses to validate all design decisions, including a modified concept and design direction, selection of a prototype viscoelastic damping material, preliminary testing to validate design specifications, and detailed design and analysis toward a finalized design. Instead …

Cal Poly Prove Lab Endurance Car Composite Body Paneling Design, Emma Wheelock, Sarah Rutland, Noah Fisher, Brian Menard

Mechanical Engineering

The Cal Poly Prototype Vehicles Laboratory (PROVE Lab) needs a body paneling design for their Endurance Car aeroshell which optimizes strength, weight and accessibility while minimizing complexity. Additionally, a low-complexity, accurate manufacturing process for the PROVE Lab Endurance Car aeroshell needs to be developed. PROVE Lab designed the shape of the aeroshell. The aeroshell will serve to reduce the aerodynamic drag on the car at high speed, and is not a structural component of the car. Due to the high-strength and lightweight nature of composites, PROVE Lab requests the senior project team investigate using composites for automotive body paneling applications. …

Design Of A Martian Communication Constellation Of Cubesats, Scott J. Pirkle

Master's Theses

Spacecraft operating on the Martian surface have used relay satellites as a means of improving communication capabilities, mainly in terms of bandwidth and availability. However, the spacecraft used to achieve this have been large spacecraft (1000s of kilograms) and were not designed with relay capability as the design priority. This thesis explores the possibility of using a CubeSat-based constellation as a communications network for spacecraft operating on the Martian surface. Brute-force techniques are employed to explore the design space of possible constellations. An analysis of constellation configurations that provide complete, continuous coverage of the Martian surface is presented. The stability …

Development And Characterization Of An Iot Network For Agricultural Imaging Applications, Jacob D. Wahl

Master's Theses

Smart agriculture is an increasingly popular field in which the technology of wireless sensor networks (WSN) has played a large role. Significant research has been done at Cal Poly and elsewhere to develop a computer vision (CV) and machine learning (ML) pipeline to monitor crops and accurately predict crop yield numbers. By autonomously providing farmers with this data, both time and money are saved. During the past development of a prediction pipeline, the primary focuses were CV and ML processing while a lack of attention was given to the collection of quality image data. This lack of focus in previous …

Distance Estimation Using Ofdm Signals For Ultrasonic Positioning, Kyman Huang

Master's Theses

This paper describes a method of estimating distance via Time-of-Flight (TOF) measurement using ultrasonic Orthogonal Frequency Division Multiplexing (OFDM) signals. Using OFDM signals allows the signals and their sub-carriers to remain orthogonal to each other while continuously transmitting. This estimation method is based on the change of phase of a traveling wave as it propagates through a medium (air for ultrasonic signals). By using signals containing multiple tones, the phase change between each frequency component is slightly different. This phase difference is dependent on the distance traveled and can thus be used to estimate distance. This paper studies the impact …

Design, Validation, And Verification Of The Cal Poly Educational Cubesat Kit Structure, Nicholas B. Snyder

Master's Theses

In this thesis, the development of a structure for use in an educational CubeSat kit is explored. The potential uses of this kit include augmenting existing curricula with aspects of hands on learning, developing new ways of training students on proper space systems engineering practices, and overall contributing to academic capacity building at Cal Poly and its collaborators. The design improves on existing CubeSat kit structures by increasing accessibility to internal components by implementing a modular backplane system, as well as adding the ability to be environmentally tested. Manufacturing of the structure is completed with both additive (Fused Deposition Modeling …

Numerical Methods For Predicting The Dynamic Crushing Response And Energy Absorption Of Composite Aluminum Honeycomb Sandwich Structures, Cody R. Volk

Master's Theses

Edgewise crushing responses of composite aluminum honeycomb sandwich structures were predicted using finite element analysis (FEA) software LS-DYNA by modeling the honeycomb as a material with anisotropic properties. The goal of the project was to develop a process for modeling the sandwich structure to rapidly iterate possible solutions for a safer workstation train table. Current workstation tables are too rigid and may cause injury or death in a head-on collision. Experimental compression tests were used to calibrate the aluminum honeycomb core with material type 26 (MAT 26, honeycomb). A published composite tensile test was used to validate the use of …

Bootstrapping Massively Multiplayer Online Role Playing Games, Mitchell Miller

Master's Theses

Massively Multiplayer Online Role Playing Games (MMORPGs) are a prominent genre in today's video game industry with the most popular MMORPGs generating billions of dollars in revenue and attracting millions of players. As they have grown, they have become a major target for both technological research and sociological research. In such research, it is nearly impossible to reach the same player scale from any self-made technology or sociological experiments. This greatly limits the amount of control and topics that can be explored. In an effort to make up a lacking or non-existent player-base for custom-made MMORPG research scenarios A.I. agents, …

The Effect Of Orientation On The Ignition Of Solids, David Morrisset

Master's Theses

The ignition of a solid is an inherently complex phenomenon influenced by heat and mass transport mechanisms that are, even to this day, not understood in entirety. In order to use ignition data in meaningful engineering application, significant simplifications have been made to the theory of ignition. The most common way to classify ignition is the use of material specific parameters such as such as ignition temperature (T_ig) and the critical heat flux for ignition (CHF). These parameters are determined through standardized testing of solid materials – however, the results of these tests are generally used in applications …

Simulation Analysis On Ballistic Deflection Of Projectile Obliquely Penetrating Into Concrete, Jianfeng Xue, Peihui Shen, Xiaoming Wang

Journal of System Simulation

Abstract: In order to study the trajectory deflection law of projectiles obliquely penetrating into concrete targets, based on the theory of rigid body kinematics and cavity expansion, the penetration motion differential equations of ogive-nosed projectile were established. The variation rules of trajectory offset and invasion depth were given in different initial conditions through the programming calculation and numerical simulation by MATALB and ANSYS-LYNA software. The calculation results agree well with experimental data. The results show that the influence of penetration depth and deflection angle increase with the oblique angle increasing. The influence of ballistic deflection decreases with the …

Smartphone-Tape Method For Calculating Body Segment Inertial Parameters For Analysis Of Pitching Arm Kinetics, Jay Sterner

Master's Theses

The objectives of this study were to (1) develop a non-invasive method (referred to as Smart Photo-Tape) to calculate participant-specific upper arm, forearm, and hand segment inertial properties (SIPs) (e.g. mass, center of mass, and radii of gyration) and (2) use those Smart Photo-Tape properties in inverse dynamics (ID) analyses to calculate injury-related pitching arm kinetics. Five 20- to 23- year-old baseball pitchers were photographed holding a baseball and analyzed using the Smart Photo-Tape method to obtain 3-D inertial properties for their upper arm, forearm, and hand. The upper arm and forearm segments were modelled as stacked elliptic cylinders and …

A Parametric Study Of Formation Flight Of A Wing Based On Prandtl's Bell-Shaped Lift Distribution, Kyle S. Lukacovic

Master's Theses

The bell-shaped lift distribution (BSLD) wing design methodology advanced by Ludwig Prandtl in 1932 was proposed as providing the minimum induced drag. This study used this method as the basis to analyze its characteristics in two wing formation flight. Of specific interest are the potential efficiency savings and the optimal positioning for formation flight. Additional comparison is made between BSLD wings and bird flight in formation.

This study utilized Computational Flow Dynamics (CFD) simulations on a geometric modeling of a BSLD wing, the Prandtl-D glider. The results were validated by modified equations published by Prandtl, by CFD modeling published by …

Fast Chirped Signals For A Tdma Ultrasonic Indoor Positioning System, Lauren M. Williams

Master's Theses

In this paper, a new concept for ultrasonic indoor positioning based on instantaneous frequency of ultrasonic signals is presented. Nonlinear phase characteristics of ultrasonic transducers introduce a frequency deviation in ultrasonic signals. By sweeping at very fast rates, a large spike in the deviation is introduced. The artefacts observable in instantaneous frequency estimations are highly localized and present an opportunity for accurate frequency detection. In order to be useful, the artefacts need to take place within the pulse and have sufficient magnitude for accurate processing. The system consists of a transducer transmitter and receiver pair, which have a center frequency …

Initial Orbit Determination Error Analysis Of Low-Earth Orbit Rocket Body Debris And Feasibility Study For Debris Cataloguing From One Optical Facility, Kyle Stoker

Master's Theses

This paper is predicated on determining the effectiveness of angles-only initial orbit determination (IOD) methods when limited observational data is available for low-Earth orbit (LEO) rocket body debris. The analysis will be conducted with data obtained from Lockheed Martin Space’s Space Object Tracking (SpOT) facility, focusing on their observational data from 2018 that contains tracking of rocket body debris for less than one minute per overhead pass. After the IOD accuracies are better understood, a feasibility study will follow that investigates the possibility of cataloguing LEO orbital debris from a single optical observation facility with similar observational capabilities as that …

Simulating Particle Packing During Powder Spreading For Selective Laser Melted Additive Manufacturing Using The Discrete Element Method In Abaqus, Priscilla Ng

Master's Theses

Metal additive manufacturing allows for the rapid production of complex parts that are otherwise impractical using conventional subtractive manufacturing techniques. Applications for additive manufacturing span across a broad array of industries including aerospace, automotive, and medical, among many others. One metric of printing success is material properties, including part density. While there has been extensive research completed for the density of printed parts, there is little published work concerning powder packing density on the build plate associated with powder spreading.

In this thesis, a Discrete Element Method (DEM) model was created in Abaqus to simulate the spreading behavior of particles …

Analysis Of The Tidal Range In The Sacramento San Joaquin Delta From 1857 To Present, Elena Szlemp

Master's Theses

The Sacramento San Joaquin Delta has been highly altered by human activity since the mid-1800s from mining, agriculture, dredging, and urbanization. Did the resulting modifications to channel width, depth, and length alter tidal range in the Sacramento San Joaquin Delta?

In this study, archival tidal records were evaluated at many stations throughout the San Francisco Bay and Delta, with a focus on San Francisco, Rio Vista, Sacramento, and Stockton daily, monthly, and annual tidal ranges. Monthly and seasonally averaged tidal ranges were analyzed to determine seasonal changes. In addition, tidal range was compared to daily Delta discharge to consider the …

Investigation Of Experimental Variation Of Bovine Sphingomyelin As A Novel Ingredient For Ultraviolet Protection, Esther Chen

Master's Theses

Skin cancer is a prevalent disease that globally affects 2-3 million people per year [1]. This number is expected to grow tenfold as depletion of the ozone layer contributes to harsher rays reaching Earth’s surface [2]. A common way to protect against those ultraviolet waves is to apply sunscreen, however, recent reports call into question the safety of some active ingredients as they can enter through the skin into the bloodstream [3]. This thesis aims to investigate an alternative solution that uses bovine sphingomyelin (BSM) as photoprotective solution against UV irradiation.

In order to evaluate the effectiveness of BSM against …

Surface Modifications Of Reverse Osmosis Membranes For Removal Of Bromide And Reduction Of Fouling, Joseph Seo

Master's Theses

Reverse osmosis (RO) is widely used for water reuse and desalination. Although RO membranes are known for their high salt rejection and practical permeate flux, their performance can be impaired by fouling, and their removal of some disinfection byproducts and their precursors (e.g., bromide, N-Nitrosodimethylamine [NDMA]) does not meet drinking water standards. RO membrane modifications have been widely studied to overcome these limitations. In this research, RO membranes were grafted with cationic polymers to induce a positive charge on the RO membrane surface. This modification aimed at enhancing the rejection of negatively charged bromide ions by removing them from solution …

A Study Of The Design Of Adaptive Camber Winglets, Justin J. Rosescu

Master's Theses

A numerical study was conducted to determine the effect of changing the camber of a winglet on the efficiency of a wing in two distinct flight conditions. Camber was altered via a simple plain flap deflection in the winglet, which produced a constant camber change over the winglet span. Hinge points were located at 20%, 50% and 80% of the chord and the trailing edge was deflected between -5° and +5°. Analysis was performed using a combination of three-dimensional vortex lattice method and two-dimensional panel method to obtain aerodynamic forces for the entire wing, based on different winglet camber configurations. …