Engineering Commons^™

Nanomagnet Based Reservoir Computing And Quantum Control, Fahim F. Chowdhury

Theses and Dissertations

Conventional CMOS scaling has driven remarkable advances in computing but faces increasing physical and energy constraints, motivating alternative computing paradigms that integrate memory and computation while improving energy efficiency. Nanoscale magnetic systems offer a promising platform for such approaches because their intrinsic nonlinear dynamics and localized magnetic fields can support both classical and quantum information processing. This thesis investigates nanomagnetic systems for physical reservoir computing and, with primary emphasis, for localized quantum control of spin qubits.

The first part explores dipole-coupled nanomagnet arrays as physical reservoirs. Micromagnetic simulations demonstrate nonlinear dynamical behavior with high short-term memory and parity-check capacity, enabling …

Empirical Dynamical Modeling Of Cortico-Hippocampal Information Transfer During Memory Encoding, Sam Y. Cole

Theses and Dissertations

Understanding how brain dynamics support successful memory formation remains a central challenge in neuroscience. This dissertation applies tools from empirical dynamical systems theory to investigate the neural mechanisms underlying episodic encoding, with a focus on cortico-hippocampal interactions. Using stereoelectroencephalography (sEEG) data recorded during a delayed free recall of word lists task, this work reveals nonlinear, state-dependent shifts in directed information flow between cortex and hippocampus that distinguish successful from unsuccessful encoding. To further characterize these dynamics, state-space trajectories are reconstructed using time-delay embedding and recurrence-based methods, and features derived from these trajectories are used to classify memory outcomes. By integrating …

Modeling Of Laser-Produced Plasma Plumes: Expansion, Chemistry, And Thin-Film Deposition, Edmund Tsiri Semaha, Edmund Tsiri Semaha

Theses and Dissertations

Abstract

Laser-assisted material processing involves coupled plasma expansion, chemical reactions, and particle transport that govern the quality of thin-film deposition. This dissertation presents a comprehensive computational investigation of these processes using the OpenFOAM framework. First, the performance of the twoPhaseEulerFoam (tPEF), rhoCentralFoam (rCF), and sonicFoam (sF) solvers is evaluated for modeling laser-produced plasma plume expansion under atmospheric conditions, demonstrating that tPEF accurately captures shock-wave propagation, hydrodynamic behavior, and multispecies interactions. Building on this validation, the reactingFoam (rF) solver is employed to investigate the chemistry of aluminum plasma expanding into an air environment (Al–N₂–O₂). The model incorporates appropriate thermodynamic, transport, and …

Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling CO₂ channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO₂ injection. Chromium-based crosslinkers (CrAc and CrCl₃) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Carbon Nanotube/ Thermoplastic Polyurethane (Cnt/Tpu)-Based Triboelectric Nanogenerator With Self-Charge Pumping For Implantable Knee Load Sensing And Energy Harvesting, Osama Abdalla, Maryam Hosseini, Milad Azami, Amir Ameli, Emre Salman, Milutin Stanacevic, Ryan Willing, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

Aseptic loosening and joint instability remain the primary modes of failure in total knee arthroplasty (TKA). To provide real-time biomechanical load monitoring, this study presents a triboelectric nanogenerator (TENG) utilizing a carbon nanotube/foamed thermoplastic polyurethane (CNT/TPU) composite dielectric layer paired with a Kapton tape between dual electrodes. By leveraging the triboelectric effect, the device functions simultaneously as an energy harvester and a self-powered load sensor. To overcome power density limitations, a self-charge pumping mechanism via a multi-stage voltage multiplier circuit (VMC) was integrated and evaluated under physiological cyclic loading (2100 N at 1 Hz). The system’s charge dynamics were further …

Eco-Friendly Solvent-Based Fabrication Of Single-Layer And Polydopamine-Modified Bilayer Pvdf-Hfp Membranes, Eesh M. Kulshrestha

Theses and Dissertations--Chemical and Materials Engineering

The growing global demand for clean drinking water has intensified the need for advanced water treatment technologies capable of efficiently removing contaminants while maintaining environmental sustainability. Polymeric membrane systems have emerged as an effective approach for water separations due to their high separation efficiency, simplicity, and adaptability to a wide range of water treatment applications. However, traditional membrane fabrication processes often rely on toxic organic solvents, such as N-methyl-2-pyrrolidone (NMP) and diemethylacetamide (DMAc), which pose environmental and health risks. These concerns have led to an increase in regulatory restrictions, primarily through the Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) …

Investigation Of Succinylated Zwitterionic Polyethylenimine/Dna Complexes: Performance In Serum, Internalization, And Intracellular Fate, Levi Lampe

Theses and Dissertations--Chemical and Materials Engineering

Gene therapy has promised to revolutionize medicine since the earliest clinical trials, but a lack of delivery methods that are both safe and efficient has hampered progress. Gene therapy with viral vectors is effective at delivering nucleic acids to cells, but is associated with dangerous immunogenic responses and cancer-causing insertions into the genome. Viral vectors are also among the most prohibitively costly therapeutics in medicine. Polymeric vectors avoid these dangers and are made from inexpensive, off-the- shelf materials, but have been hindered by poor efficiency compared to viral vectors.

A benchmark polymer for in vitro nucleic acid delivery has been …

Aqueous Synthesis Of Luminescent Semiconductors For Opto-Electronic Applications, Saurabh Singh

Theses and Dissertations--Chemical and Materials Engineering

The advancement of opto-electronic and scintillation technologies relies heavily on developing low-temperature, eco-friendly, and scalable synthesis routes for high performance luminescent halide-based semiconductor materials. However, traditional synthesis methods for halide-based semiconductors, including hot-injection, solvothermal, solid-state reactions, Ligand-Assisted Reprecipitation (LARP), microwave-assisted synthesis, and thin film deposition techniques (spin coating, physical vapor deposition (PVD), chemical vapor deposition (CVD), etc.), often demand toxic organic/inorganic solvents, elevated processing temperatures, and high vacuum/inert environments. Such constraints limit their scalability, raise environmental concerns, and impede their commercial-level device integration. This research overcomes these long-standing challenges by employing water as a powerful crystallization-directing, and environmentally benign medium …

Anaerobic Digestion Of Food Waste Components: Modeling Biogas Production, Opeyemi E. Adelegan

Civil Engineering Dissertations

Food waste constitutes the single largest component of municipal solid waste landfilled in the United States — approximately 22% of 292.4 million tons generated in 2018 — and its anaerobic decomposition releases methane, a greenhouse gas with global warming potential approximately 27–30 times that of carbon dioxide over a 100-year horizon (IPCC, 2021). Anaerobic digestion (AD) offers an alternative management pathway that recovers energy and produces nutrient-rich digestate, but AD performance varies by as much as five-fold across food waste streams (130–630 m³ CH₄ per Mg VS added), and existing predictive tools either treat food waste as a …

Nanosecond Pulsed Electric Fields For Extracellular Vesicle Engineering: From Electro-Exocytosis To Cargo Modulation, Art Neal, Teresa Graham, Mohamadmahdi Samandari, Arash Ghorbannia, Anca Dobrian, Stephen J. Beebe, Ruben M. L. Colunga-Biancatelli

Bioelectrics Publications

Extracellular vesicles (EVs), including small extracellular vesicles (sEVs) and medium/large extracellular vesicles (MVs), have emerged as promising therapeutic vectors and diagnostic biomarkers across various branches of biomedicine. However, the clinical translation of EV-based technologies remains constrained by persistent challenges in manufacturing: insufficient yield from primary cell sources, limited control over cargo composition, and the absence of scalable, standardized production platforms. Nanosecond pulsed electric fields (nsPEF) represent an emerging biophysical approach that can address several of these limitations. Unlike conventional electroporation, which targets the plasma membrane using microsecond-to-millisecond pulses, nsPEF delivers ultrashort (1–300 ns), high-amplitude (10–300 kV/cm) pulses that penetrate intracellularly …

Beyond The Square Pulse: Waveform Shape, Eeg Correlates, And The Pursuit Of Natural Sensation In Tens, Jason Whitson

Honors Undergraduate Theses

This study investigates the relationship between electrical stimulus characteristics of shape and charge on evoked sensations and electroencephalogram (EEG) data during multi-waveform transcutaneous electrical nerve stimulation (TENS) of the median nerve. Neuromodulation methods have traditionally had little control over the location and quality of their associated evoked sensation (e.g., electric, vibration, touch). This experiment utilized five unique stimulus waveforms during TENS stimulation. EEG data were collected concurrently to provide an introductory objective measure of the neural responses underlying these sensory changes. Eleven participants completed three tasks (thresholding, super-threshold stimulation, two-alternative forced choice) using a two-electrode TENS approach. Stimulus waveforms were …

Artificial Intelligence In Cybersecurity: Applications, Threats, And Implications, Brandon A. Rodriguez

Honors Undergraduate Theses

The point of this thesis is to analyze the growth of artificial intelligence in the world of cyber security, highlighting the specific impacts it has in the use of defense and offensive misuse. The way that this research was done was by using three main methods, those being interviewing cybersecurity specialists, testing the uses of public AI models and by reviewing peer-reviewed studies. Some of the findings that were discovered with the research were that AI can be a great asset in supporting defensive systems with such things as assisting in the creation of scripts, but there are also negatives …

A Chicken Model For Non-Invasive Diagnosis Of Infant Developmental Dysplasia Of The Hip (Ddh) Using Acoustic Transmission Measurements, Aliza Shah

Honors Undergraduate Theses

Developmental dysplasia of the hip (DDH) is a condition characterized by abnormal development and stability of the hip joint. In a healthy infant, the femoral head (ball) fits securely within the acetabulum (socket of the pelvis), allowing for proper joint function. In DDH, the relationship is disrupted, ranging from mild acetabular dysplasia to partial (subluxation) or complete dislocation of the femoral head. This condition represents a range of structural abnormalities that develop during early growth. The integrity of the hip joint is essential for physical mobility, and disruption of this structure can lead to significant functional impairment. DDH may result …

Effect Of Inter Electrode Distance On Electrochemical Mineralization Of Calcium Carbonate In Mildly Acidic Environments, Irene Walker, Ivy Wu, Steven Decaluwe, Robert Bell, Kerry Rippy

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The effect of inter electrode distance (IED) on electrochemical mineralization in a parallel plate cell with a stainless-steel working electrode is presented. Three IEDs were tested, 6.5 mm, 15.5 mm, and 22.0 mm, for their water reduction effectiveness to create a region of local alkalinity that stimulates calcium carbonate precipitation in mildly acidic conditions. Chronoamperometry at -1.6 V for 30 minutes with ex-situ optical microscopy and scanning electron microscopy (SEM) were used. At the smallest IEDs, crystal clusters formed in growth-favored regimes as compared to the largest IED, where nucleation dominated, leading to encasement of the SS mesh. Rapid precipitation …

Cfd-Coupled Multi-Objective Optimization Of A Solid Oxide Electrolysis Cell Stack, Erin Webb

Theses, Dissertations and Capstones

Solid oxide electrolysis cells (SOECs) can convert steam into hydrogen with lower electrical demand than lower-temperature electrolysis technologies. Their performance depends on coupled fluid flow, heat transfer, species transport, and electrochemical behavior, which makes optimization difficult because improving one response can negatively affect another. Detailed computational fluid dynamics (CFD) can capture these interactions, but the computational cost makes trial-and-error design impractical. This thesis develops a three-dimensional model of a two-cell planar SOEC stack in ANSYS Fluent and couples it directly to a customized NSGA-II in MATLAB. Each candidate design is evaluated using the CFD model rather than a surrogate. Eight …

Public Preferences And Trade-Offs In Critical Mineral Mining Development In The United States, Bamidele Joseph Ajiga

Masters Theses

Rising demand for battery-critical minerals has increased U.S. mining efforts, but projects often face public opposition. There is limited work on how individuals in affected regions evaluate trade-offs between economic and environmental risks.

This research applies a discrete choice experiment to examine individual preferences for proposed battery-critical minerals mining projects in Missouri, Minnesota, and Idaho. 1908 respondents evaluated hypothetical mining projects defined by jobs, state tax revenue, the proportion of tailings reprocessed, groundwater impacts, and surface water impacts, under gold and silver versus battery-critical mineral framings.

Conditional and mixed logit models were used to assess the importance of attributes, demographic …

Aura-Visionpose: Creating Datasets For Vision-Based Pose Estimation, Mohanad Alameer

Masters Theses

"Spacecraft rendezvous is an integral part of many orbital missions, including active space debris removal (ADR) and in-orbit servicing, assembly, and manufacturing (ISAM). Traditionally, rendezvous missions rely mainly on manual ground-based control to perform rendezvous and docking. While this can be effective on an individual basis, it becomes less practical at scale. Autonomous vision-based methods can reduce reliance on human control, and may improve scalability, response time, and reduce the possibility of human error for both ADR and ISAM. This work lays the necessary groundwork for developing a machine learning (ML) model for autonomous rendezvous by creating a labeled image …

General Approach To Determining The Embodied Energy Of Refractory Products, Jacob A. Kerr

Masters Theses

"Refractories are an important group of engineered materials that are critical for sustaining life in the modern age. These products are key components in many industrial processes, such as the production of steel, cement, glass, aluminum, copper, lead, and many others. It is estimated that 50 million tons of refractory products are produced and used around the world every year. Of this, an estimated 28 million tons of spent refractory is generated after use, much of which ends up in landfills all over the globe. By utilizing embodied energy methodologies, a complete sum of energy inputs can be mapped throughout …

Utilizing Coal For Mesophase Pitch-Based Carbon Fiber Production: Precursors, Processes, And Progress, Christina M. Thompson

Theses and Dissertations--Chemistry

Graphitic materials possess unique properties due to the unique combination of layered crystalline structure and carbon’s low atomic weight. High performance carbon fiber is one such example, displaying exceptional strength-to-weight ratios, stiffness, and thermal and chemical resistance. These properties render high performance carbon fiber a critical structural reinforcement material in the manufacture of composites across various industries, such as for automotive and aerospace applications. However, balancing fiber performance with precursor and processing costs remains a challenge. As alternative carbonaceous feedstocks are explored, coal has gained interest for utilization in graphitic products as a relatively abundant and low-cost source of aromatic …

The Effect Of Scanning Strategy And Build Conditions On The Residual Stress Of A Ded System With Realistic Clad Geometry, Christopher Matthew Roeder

Graduate Research Theses & Dissertations

Direct Energy Deposition (DED) is a leading metal additive manufacturing method for fabricating complex parts. However, the high thermal gradients during the process, along with their effects on thermal expansion and shrinkage during heating and cooling cycles, result in significant residual stress that imposes substantial limitations on the building process. These stresses can lead to warpage, cracking, and a reduction in overall mechanical performance, challenges that must be addressed in most manufacturing industries. While scanning patterns and clad geometry have often been studied independently, their interaction may provide deeper insights into the causes and effects of these operating conditions on …

Development And Characterization Of Flat And Flexible Rebco Cables For High-Field Accelerator Magnets, Emily Romancew

Graduate Research Theses & Dissertations

High-Temperature Superconducting (HTS) materials are at the forefront of innovation for fundamental particle physics. The next generation of particle accelerators aims to explore higher mass particles and is dependent on the ability to achieve higher fields in the 20–30 T range to keep machine size within a practical footprint. Current magnet technology relies on low-temperature superconductors (LTS) such as NbTi and Nb₃Sn, which are limited to fields of approximately 8–16 T, while high-temperature superconductors (HTS), particularly Rare-Earth Barium Copper Oxide (REBCO), offer a promising pathway toward higher-field magnets due to their ability to carry large currents at elevated magnetic fields. …

An Integrated Pull System Framework For Disassembly Industries: Bridging The Supply-Demand Mismatch In Duck Meat Processing, Hongchao Yu

Graduate Research Theses & Dissertations

Disassembly-based production systems, such as duck meat processing, face inherent operational challenges due to one-to-many production structures, short product shelf life, and volatile customer demand. A single carcass must be processed into multiple products at largely fixed biological ratios, while demand varies across products and over time. This supply-demand mismatch frequently leads to simultaneous surplus and shortage, resulting in unstable shipment schedules, excess inventory, and unavoidable waste. Traditional order-driven pull systems typically respond to orders independently and are limited in their ability to coordinate these interrelated effects.

This dissertation develops an integrated pull system framework for perishable disassembly processes, using …

Feasibility Of Corn Stover For Biogas Production In Northwestern Illinois: A Case Study Of Jo Daviess And Carroll Counties, Anthony Amotoe-Bondzie

Masters Theses

The growing demand for renewable energy and sustainable waste management has intensified interest in agricultural residues such as bioenergy feedstocks. This study evaluated the feasibility of converting corn stover into biogas through anaerobic digestion (AD) in Jo Daviess and Carroll Counties, Illinois, with consideration of the Savanna Industrial Park as a potential centralized processing hub. Although corn stover represents one of the largest biomass resources in the United States, this research identifies a critical gap between theoretical availability and practically recoverable feedstock. Using a mixed-methods framework, the study integrates biomass quantification, methane yield modeling, economic analysis, and policy assessment. Results …

Lean Service System Optimization In U.S. Automotive Maintenance Centers: A Time Study And Simulation-Based Approach To Reducing Service Cycle Time And Increasing Efficiency, Rakibul Hasan Sarker

All Graduate Theses, Dissertations, and Other Capstone Projects

The primary objective of this study is to measure the current service time at a U.S. automobile service center, with the aim of reducing waste and optimizing service operations through time study and simulation modeling. Inefficiencies in those service centers increase service time and labor costs, reduce service quality, and reduce workshop productivity, thereby increasing customer waiting time. In this study, real-world shop floor data were collected from a single service center, namely Jiffy Lube. Over the course of ten working days, 205 vehicle data points were acquired. Service time, bay time, and overall process time were computed and examined …

Early Stem Impressions, Student Engagement, And Readiness For Digitalization, Myron Sheu

Journal of International Technology and Information Management

This study examines how early impressions of science, technology, engineering, and mathematics (STEM) shape business students’ learning behaviors and, ultimately, their readiness for organizational digitalization. Focusing on gender differences, subgroup identities, and perceived obstacles, the analysis uses survey data processed through correlation matrices, regression models, and subgroup heatmaps to trace the relationship between initial attitudes toward STEM and subsequent engagement patterns. The findings reveal consistent links between positive early impressions and active participation in structured STEM activities, along with gender-based distinctions in action preferences. Subgroup analyses further uncover nuanced patterns where stereotypes or perceived barriers correspond with reduced engagement. Collectively, …

Does Digital Innovation Matter For Hospital Efficiency? Evidence From U.S. Hospitals, C. Christopher Lee, Shihui Fan, Jung Young Lee, David W. Hwang

Journal of International Technology and Information Management

Purpose – This study examines the impact of digital innovation on hospital performance, providing evidence to guide healthcare administrators and policymakers in making informed decisions regarding digital investment.

Design/Methodology/Approach – Using data from the 2020 American Hospital Association (AHA) U.S. Hospital Survey and the 2019 AHA Information Technology Survey, we empirically analyze the relationship between five dimensions of digital innovation—automation, cybersecurity, telehealth, health information exchange (HIE), and IT spending—and three efficiency indicators: occupancy rate, capacity productivity, and manpower productivity.

Findings – The results show that digital innovation has varying effects on hospital efficiency. Automation is positively associated with capacity and …

The Crowdfunding Paradox In Crisis: Rising Funder Demand Vs. Declining Entrepreneur Supply, Dan Liu, Guangzhi Shang, Cynthia Fan Yang

Journal of International Technology and Information Management

This study investigates how the crowdfunding marketplace responds to major crises, focusing on behavioral shifts among funders and entrepreneurs. Results show a dual impact on platform dynamics. On the demand side, funders become more engaged, with notable increases in the number of backers, average contributions, and total pledge amounts. This heightened activity suggests stronger altruistic motivations, as individuals view crowdfunding as a way to support others during difficult times. On the supply side, however, entrepreneurs act more cautiously, leading to a decline in new project launches. This drop likely reflects increased risk aversion and uncertainty as creators navigate volatile conditions. …

Extrusion-Based Additive Manufacturing Of Magnetic Heat Exchange Structures For Caloric Applications, Turab S. Rizvi

UROP Posters

Developing sustainable, high-efficiency cooling technologies is vital to addressing 21st century energy challenges. This research focuses on magnetic refrigeration, an environmentally friendly cooling method utilizing the magnetocaloric effect to regulate temperature using magnetic fields. This approach offers greater energy efficiency than conventional vapor-compression systems by eliminating harmful refrigerants. The critical component is the regenerator, made of magnetocaloric material and transfers heat between the magnetic material and a fluid through parallel channels. Traditional designs such as packed beds of particles are prone to particle segregation, creating an undesirable pressure drop. The main goal of our research was to fix those flaws …

Implications Of Quantum Computing For Enterprise Cybersecurity And Data Integrity, Manikantha Varaprasad Inakollu

Computer Science and Engineering Faculty Publications

Quantum computing represents a paradigm shift in computational capabilities that poses both unprecedented threats and opportunities for enterprise cybersecurity. This research examines the implications of quantum computing advancement on current cryptographic systems, data protection mechanisms, and organizational security frameworks. Through analysis of quantum computing developments from 2019-2024 and surveys of 280 cybersecurity professionals across various industries, this study identifies critical vulnerabilities in existing encryption standards and explores emerging quantum-resistant solutions. The findings reveal that approximately 78% of enterprises remain unprepared for quantum threats, with current RSA and ECC encryption systems facing potential compromise within the next 10-15 years. The research …