Engineering Commons^™

Acoustic And Ultrasonic Beam Focusing Through Aberrative And Attenuative Layers, Hossain Ahmed

Theses and Dissertations

Ultrasonic nondestructive evaluation (NDE) is a well-established technique to assess material properties and material state in noninvasive way. However, conventional NDE technologies are limited by the thick top coatings over the structure and, therefore, require time consuming removal and replacement of the coatings to perform the inspection. In biological application, although ultrasonic NDE is a safer method in compared to other radioactive non-invasive techniques, aberration of acoustic beams is more common as it encounters multiple tissue layers of complex geometry with nonhomogeneous properties. These limit the use of ultrasonic NDE in engineering and biological applications. To alleviate this problem, recently …

Development Of A Cfd Model For The Drying Of Aluminum-Clad Spent Nuclear Fuel, Nathaniel Cooper

Theses and Dissertations

The United States Department of Energy (DOE) currently manages approxi- mately 2500 metric tons of heavy metal (MTHM) of spent nuclear fuel (SNF), pri- marily from naval sources and domestic research reactors, and has agreements in place to accept 10,000 MTHM of aluminum-clad SNF from foreign reactors by 2029. However, due to the closure and the Yucca Mountain site and difficulties in the vitrification process, the majority of this fuel is expected to be placed in intermediate dry storage.

Before being placed in interim storage, all assemblies must be subjected to a drying process, either by forced gas recirculation (FGR) …

Camera Placement Meeting Restrictions Of Computer Vision, Sara Aghajanzadeh, Roopasree Naidu, Shuo-Han Chen, Caleb Tung, Abhinav Goel, Yung-Hsiang Lu, George K. Thiruvathukal

Computer Science: Faculty Publications and Other Works

In the blooming era of smart edge devices, surveillance cam- eras have been deployed in many locations. Surveillance cam- eras are most useful when they are spaced out to maximize coverage of an area. However, deciding where to place cam- eras is an NP-hard problem and researchers have proposed heuristic solutions. Existing work does not consider a signifi- cant restriction of computer vision: in order to track a moving object, the object must occupy enough pixels. The number of pixels depends on many factors (how far away is the object? What is the camera resolution? What is the focal length?). …

The Professional Constructor, Full Issue, Volume 45, Number 02

The Professional Constructor

No abstract provided.

Open Source Arc Analyzer: Multi-Sensor Monitoring Of Wire Arc Additive Manufacturing, Adam M. Pringle, Shane Oberloier, Aliaksei Petsiuk, Paul G. Sanders, Joshua M. Pearce

Michigan Tech Publications, Part 1

Low-cost high-resolution metal 3-D printing remains elusive for the scientific community. Low-cost gas metal arc wire (GMAW)-based 3-D printing enables wire arc additive manufacturing (WAAM) for near net shape applications, but has limited resolution due to the complexities of the arcing process. To begin to monitor and thus control these complexities, the initial designs of the open source GMAW 3-D printer have evolved to include current and voltage monitoring. Building on this prior work, in this study, the design, fabrication and use of the open source arc analyzer is described. The arc analyzer is a multi-sensor monitoring system for quantifying …

Mechanical Properties Of Direct Waste Printing Of Polylactic Acid With Universal Pellets Extruder: Comparison To Fused Filament Fabrication On Open-Source Desktop Three-Dimensional Printers, Arthur Alexandre, Fabio A. Cruz Sanchez, Hakim Boudaoud, Mauricio Camargo, Joshua M. Pearce

Michigan Tech Publications, Part 1

Fused filament fabrication (FFF) is the most common and widespread additive manufacturing (AM) technique, but it requires the formation of filament. Fused granular fabrication (FGF), where plastic granules are directly three-dimensional (3D) printed, has become a promising technique for the AM technology. FGF could be a key driver to promote further greening of distributed recycling thanks to the reduced melt solidification steps and elimination of the filament extruder system. However, only large-scale FGF systems have been tested for technical and economic viability of recycling plastic materials. The objective of this work is to evaluate the performance of the FFF and …

Cleanpage: Fast And Clean Document And Whiteboard Capture, Jane Courtney

Articles

The move from paper to online is not only necessary for remote working, it is also significantly more sustainable. This trend has seen a rising need for the high-quality digitization of content from pages and whiteboards to sharable online material. However, capturing this information is not always easy nor are the results always satisfactory. Available scanning apps vary in their usability and do not always produce clean results, retaining surface imperfections from the page or whiteboard in their output images. CleanPage, a novel smartphone-based document and whiteboard scanning system, is presented. CleanPage requires one button-tap to capture, identify, crop, and …

Finite Element Analysis Investigation Of Hybrid Thin-Ply Composites For Improved Performance Of Aerospace Structures, Alana M. Zahn

Mechanical & Aerospace Engineering Theses & Dissertations

Commercial and private aircraft have a need for strong yet light materials in order to have the most ideal performance possible. This study looks at the use of thin-ply composite materials to improve the performance of aircraft structures by means of weight savings and/or strength increase when compared to laminates that are composed of exclusively standard-ply materials. In order to perform an investigation based solely on finite element analysis, validation efforts were performed using test data from open hole tension, open hole compression, notched tension, and notched compression specimens. Once the models were validated sufficiently, the same modeling practices were …

United States Department Of Defense (Dod) Real Property Repair, Alterations, Maintenance, And Construction Project Contract Data: 2009–2020, Tyler Stout, Adam Teston, Brent T. Langhals, Justin D. Delorit, Carlton Hendrix, Steven J. Schuldt

Faculty Publications

Nearly one-half of all construction projects exceed planned costs and schedule, globally [1]. Owners and construction managers can analyze historical project performance data to inform cost and schedule overrun risk-reduction strategies. Though, the majority of open-source project datasets are limited by the number of projects, data dimensionality, and location. A significant global customer of the construction industry, the Department of Defense (DoD) maintains a vast database of historical project data that can be used to determine the sources and magnitude of construction schedule and cost overruns for many continental and international locations. The selection of data provided by the authors …

Practical Measurement Of Size Distribution Of Blasted Rocks Using Lidar Scan Data, Irfan C. Engin, Norbert H. Maerz, Kenneth J. Boyko, Robert Reals

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Majority of the world's mine production is made by surface mining facilities for various reasons. Use of explosives is the most economical way in loosening of the main rock where hard rock formations exist. The degree of fragmentation affects the subsequent excavation and loading operations as well as indicates the success of the blasting process. Although the most preferred method for the measurement of fragment size of blasted rock is digital image analysis, the method also includes some limitations and errors. In this study, size distribution of the blasted rock was measured directly using laser scanning-LiDAR technology and a new …

A Centralised Multi-Objective Model Predictive Control For Biventricular Assist Devices, Vivian Koh Ci Ai

Student Works (2020-2029)

Heart failure is defined as failure of heart to deliver adequate blood flow rate to support tissue perfusion. Heart failure can be treated by implantation of a left ventricular assist device (LVAD) for left heart failure patients, or a biventricular assist device (BiVAD) for bi-heart failure patients. Since left heart failure predominates right heart failure, all commercial ventricular assist devices are LVADs. Therefore, two LVADs are frequently used as BiVAD for bi-heart failure patients. Clinically, the constant speed (CS) control of BiVAD fails to adapt pump flow rate according to physiological changes, thus putting patients at risk of ventricular suction …

The Influence Of Marking Methods On Mobility, Survivorship, And Field Recovery Of Halyomorpha Halys (Hemiptera: Pentatomidae) Adults And Nymphs, Danielle M. Kirkpatrick, Kevin B. Rice, Aya Ibrahim, Shelby J. Fleischer, John F. Tooker, Amy Tabb, Henry Medeiros, William R. Morrison Iii, Tracy C. Leskey

Electrical and Computer Engineering Faculty Research and Publications

Halyomorpha halys (Stål), the brown marmorated stink bug, is an invasive and highly polyphagous insect that has caused serious economic injury to specialty and row crops in the United States and Europe. Here, we evaluated the effects of marking adult and nymphal H. halys with four different colors of fluorescent powder (Blaze Orange, Corona Pink, Horizon Blue, and Signal Green) on mobility and survivorship in laboratory bioassays. Adults and nymphs were marked using liquified fluorescent powder solutions and allowed to dry prior to bioassay. The presence of the marking solution had no significant effects on adult or nymphal mobility, adult …

Effect Of Additional Weight On Human Squat Exercise Stability: Ground Reaction Forces And Centers Of Pressure, Jose Galarza, Dumitru Carantu

Mechanical Engineering Faculty Publications

The main focus of this work is to investigate the effect of weight on the stability of human squat exercise. The squat exercise is a common daily activity. Experiments are conducted using one human subject. A VICON motion analysis system integrated with Force Plates is utilized for these experiments. An experimental protocol is developed and followed. This work analyzes the time series of the normal component of the ground reaction forces and each coordinate of the center of pressure. These time series are used to estimate the Lyapunov Exponents using Rosenstein method. MATLAB software package is used for this investigation. …

Housing Occupants’ Motivational Drivers For Energy-Savings In The United Arab Emirates: An Exploratory Study, Monaya Muhammed Syam

Theses

The fast urbanization in the United Arab Emirates (UAE) accounts for 70% of energy consumption with the residential sector leading the way, urgently calling for mitigating strategies. Energy-efficient housing in hot climates has been extensively researched in terms of design, building materials and systems. However, an energy performance gap subsides as a direct result of occupants’ behaviour, catalyzing focused research. Moreover, understanding the housing occupants’ behaviour, motivation, and impetus to save energy proved to significantly increase energy savings. Exploring this topic in the UAE is vital given its distinctive specifics; fast-growing economy, harsh hot climate, and heterogeneous population. The latter …

A Simplified Method For Experimentally Quantifying Crude Oil Swelling During Immiscible Carbon Dioxide Injection, Sherif Fakher, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Immiscible carbon dioxide (CO₂) injection is one of the highly applied enhanced oil recovery (EOR) methods due to its high oil recovery potential and its ability to store CO₂ in the reservoir. The main mechanism of immiscible CO₂ injection is oil swelling. Generally, oil swelling is measured experimentally or measured using modeling methods. This research conducts oil swelling experiments using a simplified method in order to easily and accurately measure oil swelling and determines some of the most significant factors that may impact oil swelling during CO₂ injection. The impact of varying CO₂ injection …

Orphan Boy And Orphan Girl: Historical Information On Groundwater And Flooded Workings, Emelina Doucette

Graduate Theses & Non-Theses

Groundwater has historically, and still is, a concern within the mining industry due to the relationships between potential environmental and safety impacts. Montana Technological University uses a once operating silver mine, the Orphan Boy, to provide students with hands-on experience and is known as the Underground Mine Education Center (UMEC). The UMEC, and neighboring Orphan Girl mine located at the World Museum of Mining, have experienced increasing water levels the past few years. A compilation of known information pertaining to the Orphan Girl and Orphan Boy groundwater connections is presented using historical groundwater and mine data, stope books, hydrographs, and …

Analysis Of Semi-Arid Riparian Environments Using Satellite Imagery, Kira Overin

Graduate Theses & Non-Theses

Semi-arid riparian environments are at risk of being over-exploited or degraded due to increased water usage associated with growing housing demands. Trends surrounding these developments can be monitored using freely available Landsat satellite imagery in conjunction with seasonal stream discharge rates. This project focuses on a stream system located southwest of Ennis, Montana, where population is growing rapidly. It aims to characterize the connection between variable discharge rates in small-scale riparian environments and adjoining vegetation health, while considering possible implications of continued urbanization. Methods for preventing riparian ecosystem degradation and promoting resilience are also discussed.

Investigation Into The Effects Of Supercritical Carbon Dioxide Exposure On Well-Bore Cement Integrity, Claude Boiteau

Graduate Theses & Non-Theses

Current subterranean injection of anthropogenic Carbon Dioxide (CO₂), or CO₂ resulting from human activity, is occurring at multiple locations in both the domestic United States and abroad. It involves the capture of CO₂ from stationary industrial sources such as power plants and processing facilities, and subsequent injection into suitable subsurface environments. Injection is an alternative to the release of CO₂ and reduces the environmental impact of increased atmospheric carbon levels. The three scenarios for CO₂ injection are: the sequestration of captured anthropogenic CO₂, the re-injection of produced CO₂, and the …

An Investigation Of The Effect Of Trunk Musculature On The Lumbar Spine Injury During A High-Speed Frontal Central Crash, Nan Lin

Master's Theses (2009 -)

Motor vehicle crashes have been a leading cause of fatalities and injuries worldwide. Owing to new protection systems, the occurrence of injuries has been decreasing in recent years. On the contrary, the incidence of lumbar spine injuries in frontal crashes has been increasing as a function of the vehicle model year. However, only a few studies focused on lumbar spine injuries in vehicle crashes. Therefore, the mechanism of lumbar spine injuries has not been understood thoroughly. Muscle contraction is one of the factors that influence the risk of lumbar spine injuries as occupants tend to brace their muscles during a …

Aerial Imaging Riverflow System Using Optical Flow, Jamir Shariar Jyoti

Master's Theses (2009 -)

Watershed models of extreme flooding events require accurate and reliablemeasurements of streamflow for calibration and validation. However, flow rate measurements during floods are inherently uncertain, and physical measurements of velocity during flood conditions are prohibitive in many cases. Therefore, novel methods to measure stream velocity during extreme floods must be considered. This work addresses this challenge through the development of the Aerial Imaging Riverflow System (AIRS), a novel system that utilizes drones, aerial imagery, and optical flow algorithm to measure velocity in rivers and streams. This system was applied at a case study location on the Menomonee River in Wauwatosa, …

Seasonal Hydrologic And Biogeochemical Drivers Of Nutrient Availability In Urban Green Spaces, Isabelle R. Horvath

Master's Theses (2009 -)

Humans dominate urban nutrient cycles – adding nitrogen (N) and phosphorus (P) through car exhaust, fertilizer over-use, and pet waste. N and P are transported to streams via stormwater runoff, where they create eutrophic conditions and reduced water quality. Urban green spaces, like green stormwater infrastructure (GSI), have potential to mitigate N and P pollution through retention in soils and plants. Nutrient retention is accomplished in urban green spaces through filtration, plant uptake, and biogeochemical processes. These processes are highly variable, due to the influence of varying environmental drivers, such as temperature, rainfall, soil moisture, and soil redox status. This …

Seasonal Hydrologic And Biogeochemical Drivers Of Nutrient Availability In Urban Green Spaces, Isabelle R. Horvath

Master's Theses (2009 -)

Humans dominate urban nutrient cycles – adding nitrogen (N) and phosphorus (P) through car exhaust, fertilizer over-use, and pet waste. N and P are transported to streams via stormwater runoff, where they create eutrophic conditions and reduced water quality. Urban green spaces, like green stormwater infrastructure (GSI), have potential to mitigate N and P pollution through retention in soils and plants. Nutrient retention is accomplished in urban green spaces through filtration, plant uptake, and biogeochemical processes. These processes are highly variable, due to the influence of varying environmental drivers, such as temperature, rainfall, soil moisture, and soil redox status. This …

Benign Paroxysmal Positional Vertigo Predictive Diagnosis From Patient-Facing Survey, Taiwo Fasae

Master's Theses (2009 -)

Benign Paroxysmal Positional Vertigo (BPPV) is a leading cause of dizziness and imbalance that is responsible for one-third of fall incidents. Diagnosis, however, is ridden with uncertainties and errors. This thesis explores various techniques for BPPV predictive diagnosis from a survey study and proposes measures for predictive performance improvement. Patient-facing surveys are established ways of acquiring medical history in clinical settings and, as this thesis demonstrates, are capable of conveying patterns distinguishable for accurate diagnosis. This work begins by discussing BPPV and vestibular disorders in general, and the risks associated with misdiagnosis or elusive diagnosis. Innovative efforts by medical professionals …

Open Source High-Temperature Reprap For 3-D Printing Heat-Sterilizable Ppe And Other Applications, Noah G. Skrzypczak, Nagendra G. Tanikella, Joshua M. Pearce

Michigan Tech Publications, Part 1

Thermal sterilization is generally avoided for 3-D printed components because of the relatively low deformation temperatures for common thermoplastics used for material extrusion-based additive manufacturing. 3-D printing materials required for high-temperature heat sterilizable components for COVID-19 and other applications demands 3-D printers with heated beds, hot ends that can reach higher temperatures than polytetrafluoroethylene (PTFE) hot ends and heated chambers to avoid part warping and delamination. There are several high temperature printers on the market, but their high costs make them inaccessible for full home-based distributed manufacturing required during pandemic lockdowns. To allow for all these requirements to be met …

Parametric Nasopharyngeal Swab For Sampling Covid-19 And Other Respiratory Viruses: Open Source Design, Sla 3-D Printing And Uv Curing System, Nicole Gallup, Adam M. Pringle, Shane Oberloier, Nagendra G. Tanikella, Joshua M. Pearce

Michigan Tech Publications, Part 1

Access to nasopharyngeal swabs for sampling remain a bottleneck in some regions for COVID-19 testing. This study develops a distributed manufacturing solution using only an open source manufacturing tool chain consisting of two types of open source 3-D printing and batch UV curing, and provides a parametric fully free design of a nasopharyngeal swab. The swab was designed using parametric OpenSCAD in two components (a head with engineered break point and various handles), which has several advantages: i) minimizing print time on relatively slow SLA printers, ii) enabling the use of smaller print volume open source SLA printers, iii) reducing …

End-To-End Direct Digital Synthesis Simulation And Mathematical Model To Minimize Quantization Effects Of Digital Signal Generation, Pranav R. Patel, Richard K. Martin

Faculty Publications

Direct digital synthesis (DDS) architectures are becoming more prevalent as modern digital-to-analog converter (DAC) and programmable logic devices evolve to support higher bandwidths. The DDS architecture provides the benefit of digital control but at a cost of generating spurious content in the spectrum. The generated spurious content may cause intermodulation distortion preventing proper demodulation of the received signal. The distortion may also interfere with the neighboring frequency bands. This article presents the various DDS architectures and explores the DDS architecture which provides the most digital reconfigurability with the lowest spurious content. End-to-end analytical equations, numerical and mathematical models are developed …

Trust-Based User Interface Design For Islanded Alternating Current Microgrids, Yuliya Matlashova

Electrical and Computer Engineering ETDs

Futuristic microgrid systems may be capable of providing extensive information to the operator. As microgrid systems become more pervasive there will be a need to adjust the information an operator requires, to provide an optimized user-interface. In this paper, a combinatorial optimization strategy is used to provide an optimal user-interface for the microgrid operator that selects information for display depending on the operator's trust level in the system, and the assigned task. We employ a method based in sensor placement by capturing elements of the interface as different sensors, that find an optimal set of sensors via combinatorial optimization. However, …

Applying The Principle Of Least Privilege To System Management Interrupt Handlers With The Intel Smi Transfer Monitor, Brian Delgado, Tejaswini Vibhute, Karen L. Karavanic

Computer Science Faculty Publications and Presentations

Recent years have seen a growing concern over System Management Mode (SMM) and its broad access to platform resources. The SMI Transfer Monitor (STM) is Intel’s most powerful executing CPU context. The STM is a firmware-based hypervisor that applies the principle of least privilege to powerful System Management Interrupt (SMI) handlers that control runtime firmware. These handlers have traditionally had full access to memory as well as the register state of applications and kernel code even when their functionality did not require it. The STM has been been enabled for UEFI and, most recently, coreboot firmware, adding protection against runtime …

Human-Automation Interaction Testbed For Evaluating User Control Methods And Training, Sarah M. O'Meara

Link Foundation Modeling, Simulation and Training Fellowship Reports

In a complex work environment, an operational challenge may be controlling the multitude of independent objects that are required for a manual task and/or object manipulation, such as experienced by astronauts, surgeons, underwater operations, manufacturing etc. One possible option is the enhancement of the person’s capabilities through a robotic supernumerary limb (Figure 1). The idea has already been implemented in a limited application, where the United States Army Research Laboratory developed a passive limb to aid soldiers in weapon carrying and stabilization[1]. Researchers are also creating supernumerary robots. Parietti, et al. [2] designed the Supernumerary Robotics Limbs to address aircraft …

Humans-As-A-Sensor For Buildings — Intensive Longitudinal Indoor Comfort Models, Prageeth Jayathissa, Matias Quintana, Mahmoud Abdelrahman, Clayton Miller

Research Collection College of Integrative Studies

Evaluating and optimising human comfort within the built environment is challenging due to the large number of physiological, psychological and environmental variables that affect occupant comfort preference. Human perception could be helpful to capture these disparate phenomena and interpreting their impact; the challenge is collecting spatially and temporally diverse subjective feedback in a scalable way. This paper presents a methodology to collect intensive longitudinal subjective feedback of comfort-based preference using micro ecological momentary assessments on a smartwatch platform. An experiment with 30 occupants over two weeks produced 4378 field-based surveys for thermal, noise, and acoustic preference. The occupants and the …