Engineering Commons^™

Research Of Kinetic Characteristics Of The Process Of Decomposition Of Zinc Concentrate With Hydrochloric Acid, Rosilov Mansur, Deng Tianlong, Usmanov Ilham, Samadiy Murodjon

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study was the theoretical justification of the kinetic characteristics of the process of producing zinc chloride from zinc concentrate of the Khandiza deposit. For this, the effect of temperature and duration of the process of autoclave zinc extraction in a 28% hydrochloric acid solution was studied at a ratio of Zn: HCI = 1:1.1. Variable parameters were the temperature of 70, 80 and 90 °C and the duration of the leaching process of 6, 8 and 10 hours. The optimal parameters for the production of zinc chloride were determined.

The Study Of The Component Composition Of The Reaction Mixture Containing Formaldehyde Reaction Products, Hurramov Lochinbek, Alimukhamedova Nozima, Adilov Ravshan, Alimukhamedov Muzafar

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to study the effect of the conditions of the reaction of monoethanolamine (Meol) with formaldehyde (FD) on the composition of the reaction mixture. Interaction of monoethanolamine with formaldehyde leads to the formation of N,N’,N”-tris(β-oxyethyl) hexahydro-S-triazine or N,N-bisoxazolidine. The type of final product was determined by the conditions of the reaction and the molar ratio of aminoalcohol:formaldehyde. The chromatogram of the vacuum-distilled final product obtained at the molar ratio of monoethanolamine:formaldehyde=1:1 shows on an individual compound with a retention time of 4.173 s. With increase in the molar ratio of monoethanolamine:formaldehyde=1: 2, the final product …

Obtaining Microcrystalline Cellulose From Melon Crops And Studying Its Structure, Umarova Vasila, Mardonov Asror, Khamdamova Dilnoza, Akmalova Guzal

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study was to obtain microcrystalline cellulose from gourds. Cellulose was isolated from the stems of watermelon and pumpkin by acid and alkaline heat treatment. Microcrystalline cellulose was obtained from cellulose by hydrolysis. Cellulose was hydrolyzed in a mixture of sulfuric acid and hydrogen peroxide. The optical parameters of the microcrystalline cellulose sample, ash content, bulk density, water swelling, and moisture sorption were determined. The structural features of the obtained microcrystalline cellulose were studied by IR spectroscopy. The functional groups present under various conditions for the production of microcrystalline cellulose were determined. The influence of the duration …

Radiopaque Activity Of Iodine Containing Methylene-Bis-Carbamate, Baltabaev Ubaydulla, Djuraev Abdukahhor, Abduvakilov Jahongir, Abdullaeva Matluba

CHEMISTRY AND CHEMICAL ENGINEERING

Considering that many derivatives of bis carbamates have different biological activity, it was intuitive to produce a targeted synthesis of new derivatives of bis carbamates by the interaction of hexamethylene diisocyanate with 3,5-diode-4-hydroxybenzoic acid and 2,4,6-triiodophenol (1: 2 mol, respectively) in freshly distilled dry pyridine at 95-110 оC for 6 hours, the corresponding derivatives were obtained - methylene bis carbamates. Experimental studies have been conducted to identify the acute toxicity and radiopaque properties of the synthesized new N, -hexamethylene bis (2,6-diode-4-carboxyphenylcarbamate).

Modification Of Lithium Lubricants, Azimova Shodiyakhon, Arslanov Sharafutdin, Aripdjanov Oybek, Azimov Dilmurod

CHEMISTRY AND CHEMICAL ENGINEERING

The aim is to study the effect of the presence of free alkalis and acids on the properties of the complex lithium greases and the choice of the optimal dispersion medium, which provides the required physicochemical characteristics of the developed grease. The dispersed phase of lithium greases studied in the polyalphaolefin oils media. It was found that the use of a mixture of polyalphaolefin oil-4 and polyalphaolefin oil-40 as a percentage of 23/77 with a total content of 83.0% provides a relatively low effective viscosity of the lubricant at low temperatures and a relatively high tensile strength at high temperature.

Effective Oil Extraction From Bombyx Mori Silkworm Pupae And Its Structural Characteristics, Avazova Oynavod, Yugai Sveta, Rashidova Sayora

CHEMISTRY AND CHEMICAL ENGINEERING

The conditions for the effective isolation of oil from the silkworm Bombyx mori pupae, based on the extraction of extracted oil with organic reagents, have been studied. The quantitative content of oil was determined in the samples. It is revealed that the oils extracted using gasoline have a high fat-wax composition compared with ethyl alcohol and hexane. When dried pupae processed with gasoline, it is possible to extract up to 16% of fatty substances as much as possible. Physical-chemical characteristics of the oil from silkworm pupae are characterized by high quality indicators. In particular, the presence of unsaturated fatty acids …

Composition Of Liquid Paraffins For Flotation Enrichment Of Potassium Chloride, Vaqqosov Sobir, Xolmuratov Shamsitdin, Buxarov Shuhrat, Kodirov Orifjon

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to determine the source of liquid paraffins from secondary products of the local chemical industry, compare the performance properties and use the resulting products as apolar co-reagents in silvinite flotation. The experiments were conducted with secondary used hexane and pyrocondensation. To improve the efficiency of flotation, the dependences of the order of reagent’s supply into the process and the time of action were studied. Experiments have shown that when adding tetradecane and pentadecane in an amount of 2.5 to 7.5% to hexane liquid paraffins, it is possible to reduce the tail of KCl to …

Influence Of Technological Parameters On The Chemical Composition Of Calcium Polyphosphates From Phosphorites Central Kyzylkum, Ulugberdieva Ziyada, Khujamberdiev Sherzod, Mirzakulov Kholtura, Usmanov Ilkham

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research was to study the effect of temperature, the ratio of P2O5EPA:P2O5PRM and the duration of calcination on the content of various forms of P2O5 in calcium polyphosphate. The effect of calcination temperature from 150 to 300 °C, the ratio of P2O5EPA:P2O5FRM from 2,15 to 4,50 and the duration of the process from 20 to 120 minutes on the changes in various forms of P2O5 were studied. It was shown that with increasing temperature to 200-250 °C the content of the total (ortho + poly) assimilable form of Р2О5 increases and then decreases, passing through a …

Bases Of Development Of Technologies Of Synthesis Of Oxide Materials In Big Solar Furnace (Parkent), Gulamova Dilbara, Baxronov Khayot, Bobokhulov Sirojiddin, Eshonkulov Elyor

CHEMISTRY AND CHEMICAL ENGINEERING

The advantages of synthesis of complex oxide compounds by solar energy, the possibility of obtaining highly textured nano materials are shown. The development of heliomaterial science, aimed at the synthesis of new materials, is inextricably linked with the use of effective optical energy systems. On the example of obtaining superconducting materials of nominal composition Bi1.7Pb0.3Sr2Ca(n-1)CunOy (n = 3-20), optimization of the parameters of the optical-energy system of the Big Solar Furnace (Parkent) is shown. The ideology of developing heliotechnology for the synthesis of inorganic materials in a solar furnace is presented. The properties of a superconducting material of nominal Bi1.7Pb0.3Sr2Ca(n1)CunOy …

Synchronverter-Based Control Of Multi-Port Autonomous Reconfigurable Solar Plants (Mars), Phani R.V. Marthi, Suman Debnath, Mariesa L. Crow

Electrical and Computer Engineering Faculty Research & Creative Works

Control of integrated photovoltaic (PV) plants with energy storage systems (ESSs) has become an important research and development topic in recent times. In this context, a Multi-port Autonomous Reconfigurable Solar (MARS) plant that integrates PV and ESS to alternating current transmission grid and high-voltage direct current (HVdc) link is studied in this paper. With penetration of power electronic based resources in the grid, the grid's capability to recover from frequency or voltage disturbances are reduced. Therefore, one of the vital objectives of any new grid integrated power electronic resource is to provide advanced control functions like voltage and frequency support …

The Depositional Environments And Structures Of The Borrowdale Volcanic Group And The Windermere Supergroup In The Southern Lake District, England, Thomas O'Hagan

The Plymouth Student Scientist

Field studies have been undertaken on the Borrowdale Volcanic Group (BVG) and the Windermere super group (WS) in the southern Lake District. This study has been conducted to provide further work towards the understanding of the BVG’s emplacement and the depositional environments of the WS. Formal unit descriptions and stratigraphic columns are compiled from field data and accompanied by stereonet, cross section, and thin section analysis. Numerous depositional features, including asymmetric ripples and aligned clasts, found within the BVG are supportive of a sub aerial and lacustrine setting for emplacement. Bow tie fiamme and rheomorphic flow structures also hold similar …

A User Study Of A Wearable System To Enhance Bystanders’ Facial Privacy, Alfredo J. Perez, Sherali Zeadally, Scott Griffith, Luis Y. Matos Garcia, Jaouad A. Mouloud

Information Science Faculty Publications

The privacy of users and information are becoming increasingly important with the growth and pervasive use of mobile devices such as wearables, mobile phones, drones, and Internet of Things (IoT) devices. Today many of these mobile devices are equipped with cameras which enable users to take pictures and record videos anytime they need to do so. In many such cases, bystanders’ privacy is not a concern, and as a result, audio and video of bystanders are often captured without their consent. We present results from a user study in which 21 participants were asked to use a wearable system called …

Modeling Of The Electrical Characteristics Of An Organic Field Effect Transistor In Presence Of The Bending Effects, Yi Yang, Robert Nawrocki, Richard Voyles, Haiyan H. Zhang

School of Engineering Technology Faculty Publications

An analytical model incorporating the density of trap states for a bendable organic field effect transistor (OFET) is presented in this paper. The aim of this work is to propose a novel modeling framework to quantitatively characterize the bending effects on the electrical properties of an OFET in the linear and saturation regimes. In this model, the exponentially distributed shallow trap states are introduced into the Poisson equation to describe the carrier transports in the channel. The carrier mobility takes into account the low field mobility enhancement under gradual channel approximation and high field degradation. As a result, the generalized …

A Bibliometric Analysis Of Online Extremism Detection, Mayur Gaikwad, Swati Ahirrao, Shraddha Pankaj Phansalkar, Ketan Kotecha

Library Philosophy and Practice (e-journal)

The Internet has become an essential part of modern communication. People are sharing ideas, thoughts, and beliefs easily, using social media. This sharing of ideas has raised a big problem like the spread of the radicalized extremist ideas. The various extremist organizations use the social media as a propaganda tool. The extremist organizations actively radicalize and recruit youths by sharing inciting material on social media. Extremist organizations use social media to influence people to carry out lone-wolf attacks. Social media platforms employ various strategies to identify and remove the extremist content. But due to the sheer amount of data and …

Modeling Land And Hold Short Operations: Balancing Safety And Arrival Rate, Kenneth A. Ward, Heather Owen-Perry

Journal of Aviation Technology and Engineering

Many airports conduct simultaneous operations on intersecting runways to increase the rate of takeoffs and landings. This requires landing aircraft to hold short of the intersecting runway, which incurs a safety risk of runway incursions in the process. A Monte Carlo simulation was conducted to analyze the traffic load at maximum operational capacity at Charlotte-Douglas International Airport in order to analyze the fleet types and the rate of those landing aircraft unable to stop short of the intersecting runway. The researchers used the actual and four alternative compositions of the subject airline’s aircraft arrivals, interspersed among other airport traffic, to …

Measurement Of Surface Subsidence And Ground Collapse Caused By Underground Mining In The Boleo Copper District, Mexico, Jong-Gwan Kim

Journal of Sustainable Mining

Subsidence and vertical movements in mines are a challenge in mining operations. To qualify as a controlled mine site, ground movements must be measured regularly during mining operations. Boleo Copper District mine was monitored and the movement during mining operations was measured from Oct. 31, 2018 to March 15, 2019. The evaluation of vertical and horizontal movement was determined in four locations in the mine areas M303, M303S, M303 C, and M305. The exploitation area, which measured approximately 80 x 90 m² with a height of 2.4 m, impacted the surface in the form of cracks. These cracks were …

Recovery And Repurposing Of Thermal Resources In The Mining And Mineral Processing Industry, Shannon H. Mclean, Jeffrey Chenier, Sari Muinonen, Corey A. Laamanen, John A. Scott

Journal of Sustainable Mining

The consumption of energy contributes significantly to the overall cost of operations and the environmental impact of the mining and mineral processing industry. However, despite a few notable exceptions, most of the resulting waste heat produced is dissipated, without recovery, into the environment. There is also a lot of stored heat in mine water which can be tapped into long after a mine has closed. There is, therefore, significant opportunity to improve the industry's sustainability through increasing the amount of waste heat recovered and repurposed.

Mineralogical Variations With The Mining Depth In The Congo Copperbelt: Technical And Environmental Challenges In The Hydrometallurgical Processing Of Copper And Cobalt Ores, Michel Shengo Lutandula, W. S. Kitobo, M. B. Kime, M. P. Mambwe, T. K. Nyembo

Journal of Sustainable Mining

For a long time in the Democratic Republic of Congo, the mining of ores for the production of copper cathodes and salts of cobalt was mostly conducted in the near-surface oxidized mineralization of the Congo Copperbelt. An important part of this mineralization is found in geological settings where copper and cobalt mainly exist as mixtures of oxides and sulfides. With the depletion of surface-rich minerals, mining is taking place at depths where sulfide minerals are prevalent. Using current technologies, the hydrometallurgical processing of ores with high levels of sulfide minerals results in poor metal recovery due to their retention in …

Alternative Methodology To Determine Effective Coefficient Of Methane Diffusion In Coal, Henryk Koptoń

Journal of Sustainable Mining

The article presents the results of research in to the development of an alternative method of determining the effective coefficient of methane diffusion in coal, based on a mathematical model following Fick's second law. The research was conducted based on the recorded courses of methane sorption kinetics in coal samples obtained in laboratory conditions with the precise gravimetric sorption system IGA-001. The value of the coefficient was treated as an element tuning the model in such a way that the average relative error of the ex post was as small as possible. Model verification indicated the correctness of its assumptions. …

In Search Of A Future For Mining: Participative Scenarios For Colombia, Santiago Arango-Aramburo, Ricardo Smith, Patricia Jaramillo, Yris Olaya, Adrian Saldarriaga, Oscar J. Restrepo, Yuly Arboleda, Carla Rua, Sebastian Bernal, Pablo E. Londono, Erik R. Larsen

Journal of Sustainable Mining

We describe and discuss the development of scenarios for the Colombian mining industry. The scenarios were developed with a large group of stakeholders from across the Colombian government, society, and commerce, all with interest in and/or affected by the future of the mining sector. The process resulted in the creation of three different scenarios for the Colombian mining sector to 2030. The article describes the participatory process used for involving the stakeholders, including the workshops and the mapping technique that was used. It also outlines the three scenarios and possible policies that should be considered by the Colombian government in …

Ammonia-Ca-K Competitive Ion-Exchange On Zeolites In Mining Wastewater Treatment: Batch Regeneration And Column Performance, Roberto Martín Narbaitz, Zachary G. Chartrand, Majid Sartaj, Jason Downey

Journal of Sustainable Mining

This manuscript addresses the treatment explosives-impacted mining wastewaters (EIMWW) using ion-exchange to remove elevated levels of ammonia. Repeated batch loading-regeneration cycles were conducted for two commercially available zeolite media used in the treatment of ammonia-ladenEIMWW to establish the effects of competing ions and regeneration solution composition. The Northern Ontario EIMWW tested contained 3.87 meq/L total ammonia (TA) as well as 2.85 meq/L Kþ and 3.9 meq/L Ca2þ.The media studied were a natural clinoptilolite and a modified clinoptilolite (SIR-600). Five regenerant solutions with different NaCl and KCl concentrations were evaluated. The presence of potassium in the regenerant was found to hinder …

Design Optimization And Comparison Of Direct-Drive Outer-Rotor Srms Based On Fast Current Profile Estimation And Transient Fea, Vandana Rallabandi, Peng Han, Jie Wu, Aaron M. Cramer, Dan M. Ionel, Ping Zhou

Power and Energy Institute of Kentucky Faculty Publications

Outer-rotor switched reluctance machines (SRMs) have drawn much attention as promising candidates for in-wheel direct-drive motors of future electric vehicles. This article presents a systematic performance comparison of three outer-rotor SRM topologies for in-wheel traction applications in terms of the specific torque, electromagnetic efficiency, torque ripple, radial force, and mechanical aspects. A generalized design optimization framework for SRMs is proposed to enable the fast evaluation of large numbers of designs generated from the differential evolution by incorporating an analytical current profile estimation into the transient finite element analysis. The relationship between the saliency ratio and converter volt-ampere rating is also …

The Application Of Fuzzy Analytic Hierarchy Process In Sustainable Project Selection, Rakan Alyamani, Suzanna Long

Engineering Management and Systems Engineering Faculty Research & Creative Works

The project selection process is a crucial step in sustainable development. Effective sustainable development depends on the ability to select the appropriate sustainable project to implement to ensure that the desired goals are met. Some of the most common characteristics or criteria used in evaluating sustainable projects include novelty, uncertainty, skill and experience, technology information transfer, and project cost. Prioritizing these criteria based on relative importance helps project managers and decision makers identify elements that require additional attention, better allocate resources, as well as improve the selection process when evaluating different sustainable project alternatives. The aim of this research is …

Impact Of Sintering Time And Temperature On Mechanical Properties In Projection Sintering Of Polyamide-12, Justin Nussbaum, Taranjot Kaur, Julie Harmon, Nathan B. Crane

Faculty Publications

In powder bed fusion additive manufacturing (AM), the fusing process is temperature and time dependent. However, little work has been done to understand how different processing temperatures and times might impact the mechanical properties at longer sintering times than are typical in laser sintering (LS) systems. Prior results with projection sintering have shown that heating for longer times (>1s) improves part toughness compared to laser sintering. In this work, Large Area Projection Sintering (LAPS) is used to sinter entire layers of material simultaneously over the course of a few seconds with spatial control of layer temperature. This work evaluates …

Framing Energy And Minerals For Future Pathways, Michelle Michot Foss, Michael S. Moats, Kwame Awuah-Offei

Materials Science and Engineering Faculty Research & Creative Works

We present a challenge for Group of Twenty (G20) discussions that entails (1) greater awareness of the role of non-fuel minerals in the global economy overall, but specifically in the energy sector; and (2) the introduction and acceleration of alternative energy sources and technologies. We focus on chemical battery energy storage, given its prominence in all views and outlooks of energy futures, especially for mobility. We present recommendations for G20 discussions and actions on battery materials, and the crucial underlying supply chains for mineral commodities.

Socio-Physical Human Orchestration In Smart Cities, Nathan Patrizi

Electrical and Computer Engineering ETDs

In this thesis, we present a novel socio-physical human orchestration framework to deal with the increasing complexity of smart city environments, by capitalizing on recent advances in game theory and reinforcement learning, with the goal of solving the efficient management of a smart city while improving the quality of life for the humans living in said smart city. This problem has become more challenging as the smart cities have become more complicated and complex with new technologies. In the proposed framework, each human selects a Point of Interest (PoI) that it wants to visit. This selection is performed by acting …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• Center for Applied Cyber Education director takes part in Cyber Exercise

A Bibliometric Survey On The Reliable Software Delivery Using Predictive Analysis, Jalaj Pachouly, Swati Ahirrao, Ketan Kotecha

Library Philosophy and Practice (e-journal)

Delivering a reliable software product is a fairly complex process, which involves proper coordination from the various teams in planning, execution, and testing for delivering software. Most of the development time and the software budget's cost is getting spent finding and fixing bugs. Rework and side effect costs are mostly not visible in the planned estimates, caused by inherent bugs in the modified code, which impact the software delivery timeline and increase the cost. Artificial intelligence advancements can predict the probable defects with classification based on the software code changes, helping the software development team make rational decisions. Optimizing the …

A Bibliometric Survey On Cognitive Document Processing, Dipali Baviskar, Swati Ahirrao, Ketan Kotecha

Library Philosophy and Practice (e-journal)

Heterogenous and voluminous unstructured data is produced from various sources like emails, social media tweets, reviews, videos, audio, images, PDFs, scanned documents, etc. Organizations need to store this wide range of unstructured data for more and longer periods so that they can examine information all the more profoundly to make a better decision and extracting useful insights. Manual processing of such unstructured data is always a challenging, time-consuming, and expensive task for any organization. Automating unstructured document processing using Optical Character Recognition (OCR) and Robotics Process Automation (RPA), seems to have limitations, as those techniques are driven by rules or …

The Identification Of Heavy Metal Accumulator Ferns In Abandoned Mines In The Philippines With Applications To Mine Rehabilitation And Metal Recovery, Rene Juna R. Claveria, Teresita R. Perez, Ian A. Navarrete, Rubee Ellaine C. Perez, Brian Christian C. Lim

Journal of Sustainable Mining

This paper focuses on the identification of some plant accumulators of heavy metals that can facilitate mine remediation and rehabilitation in the Philippines and metal recovery or phytomining. Most of these hyperaccumulators are ferns that thrive very well in different terrains and of particular interest are Pityrogramma calomelanos, Pteris vittata, and Pteris melanocaulon that are abundant in abandoned CueAu mining areas. The amounts of Cu and As in the soil and in the aboveground (AG) and belowground (BG) components of the accumulator ferns were determined and the Bioaccumulation Factor (BF) and the Translocation Factor (TF) were derived. Efforts to …