Engineering Commons^™

Water Conservation Potential Of Self-Funded Foam-Based Flexible Surface-Mounted Floatovoltaics, Kaomi Soulemane Hayibo, Pierce Mayville, Ravneet Kaur Kailey

Michigan Tech Publications, Part 1

A potential solution to the coupled water–energy–food challenges in land use is the concept of floating photovoltaics or floatovoltaics (FPV). In this study, a new approach to FPV is investigated using a flexible crystalline silicon-based photovoltaic (PV) module backed with foam, which is less expensive than conventional pontoon-based FPV. This novel form of FPV is tested experimentally for operating temperature and performance and is analyzed for water-savings using an evaporation calculation adapted from the Penman–Monteith model. The results show that the foam-backed FPV had a lower operating temperature than conventional pontoon-based FPV, and thus a 3.5% higher energy output per …

Clearance Of Solid Household Waste With The Reception Of Alternative Types Of Energy Carriers, Rakhmatullayev F, Turabdhanov S

Technical science and innovation

The research is devoted to improving the technology of obtaining alternative types of energy carriers by applying methods of pyrolysis of unclaimed types of solid domestic wastes of biological origin, which also allow solving the tasks of improving the ecological situation in the places of formation. The practical value and relevance of this research lies in the development of advanced technology for obtaining alternative fuels. The proposed pyrolysis unit allows producing gaseous and liquid hydrocarbons in a continuous cycle. In the atmosphere of the gasifying agent (air, oxygen, water vapor, carbon dioxide or their mixture), the gasification process is primarily …

Improvement Of Light Intensity And Efficiency Of N-Zno/Nio/P-Gan Heterojunction-Based White Light Emitting Diodes Using Micro-/Nanolens Array, Apurba Adhikary, Md Shamim Ahsan, Md Mahbub Hossain, Md Bipul Hossain, S. H. Shah Newaz, Farid Ahmed, Ik-Bu Sohn

Manufacturing & Industrial Engineering Faculty Publications

Our study proposes a technique to enhance light extraction efficiency of light emitting diodes (LEDs) by incorporating various micro-/nanolens arrays (MNLAs) on the substrate layer, which in turn increases the external quantum efficiency (EQE) of the LEDs. To simulate the LEDs, we utilized the finite difference time domain method. To achieve a white LED, we inserted a thin layer of NiO at the interface between the n-type ZnO and the p-type GaN. The basic n-ZnO/NiO/p-GaN heterojunction-based LED exhibited an EQE of 10.99% where the effective refractive index of the LED structure was 1.48. The EQE was further increased by engraving …

A First Investigation Of Agriculture Sector Perspectives On The Opportunities And Barriers For Agrivoltaics, Alexis Pascaris, Chelsea Schelly, Joshua M. Pearce

Michigan Tech Publications, Part 1

Agrivoltaic systems are a strategic and innovative approach to combine solar photovoltaic (PV)-based renewable energy generation with agricultural production. Recognizing the fundamental importance of farmer adoption in the successful diffusion of the agrivoltaic innovation, this study investigates agriculture sector experts’ perceptions on the opportunities and barriers to dual land-use systems. Using in-depth, semistructured interviews, this study conducts a first study to identify challenges to farmer adoption of agrivoltaics and address them by responding to societal concerns. Results indicate that participants see potential benefits for themselves in combined solar and agriculture technology. The identified barriers to adoption of agrivoltaics, however, include: …

Comparative Analysis Of Extreme Verification Latency Learning Algorithms, Muhammad Umer, Robi Polikar

Henry M. Rowan College of Engineering Departmental Research

One of the more challenging real-world problems in computational intelligence is to learn from non-stationary streaming data, also known as concept drift. Perhaps even a more challenging version of this scenario is when -- following a small set of initial labeled data -- the data stream consists of unlabeled data only. Such a scenario is typically referred to as learning in initially labeled nonstationary environment, or simply as extreme verification latency (EVL). Because of the very challenging nature of the problem, very few algorithms have been proposed in the literature up to date. This work is a very first effort …

Bibliometric Analysis Of Firefly Algorithm Applications In The Field Of Wireless Sensor Networks, Anupkumar M. Bongale Dr., Rahul Raghvendra Joshi Prof., Kalyani Dhananjay Kadam Prof.

Library Philosophy and Practice (e-journal)

Wireless Sensor Network is a network of wireless sensor nodes that are capable of sensing information from their surroundings and transmit the sensed information to data collection point known as a base station. Applications of wireless sensor networks are large in number and forest fire detection, landslide monitoring, etc. are few applications to note. The research challenges in wireless sensor networks is the transmission of data from the sensor node to the base station in an energy-efficient manner and network life prolongation. Cluster-based routing techniques are extensively adopted to address this research challenge. Researchers have used different metaheuristic and soft …

Under Frequency Load Shedding Scheme For Islanded Distribution System Based On Mixed Integer Linear Programming, Sohail Sarwar

Student Works (2020-2029)

In recent years, significant climate changes have pivoted the distribution system towards utilization of renewable energy, particularly through distributed generators (DGs). Although DGs offer many benefits, its integration affects the stability of the system, which could lead to blackout, when the grid is disconnected. The system frequency will drop drastically if DG’s generation capacity is less than the total load demand in the network. In order to sustain the system stability, Under Frequency Load Shedding (UFLS) is a commonly used technique to minimize the difference in load demand and power generation. However, existing load shedding techniques are lack in accurate …

Sustainable Drug Release From Polycaprolactone Coated Chitin‑Lignin Gel Fibrous Scaffolds, Turdimuhammad Abdullah, Kalamegam Gauthaman, Azadeh Mostafavi, Ahmed Alshahrie, Numan Salah, Pierfrancesco Morganti, Angelo Chianese, Ali Tamayol, Adnan Memic

Department of Mechanical and Materials Engineering: Faculty Publications

Non-healing wounds have placed an enormous stress on both patients and healthcare systems worldwide. Severe complications induced by these wounds can lead to limb amputation or even death and urgently require more effective treatments. Electrospun scaffolds have great potential for improving wound healing treatments by providing controlled drug delivery. Previously, we developed fibrous scaffolds from complex carbohydrate polymers [i.e. chitin-lignin (CL) gels]. However, their application was limited by solubility and undesirable burst drug release. Here, a coaxial electrospinning is applied to encapsulate the CL gels with polycaprolactone (PCL). Presence of a PCL shell layer thus provides longer shelf-life for the …

Compact Low-Cost Fiberless Diffuse Speckle Contrast Flow-Oximeter, Guoqiang Yu, Chong Huang, J. Todd Hastings

Biomedical Engineering Faculty Patents

A low-cost compact fiberless diffuse speckle contrast flow-meter includes a small laser diode and a 2-dimensional imaging device such as a charge coupled device (CCD) or complementary metal oxide semiconductor (CMOS) for directly contacting the tissue and measuring a parameter such as blood flow in a deep/thick volume of tissue (up to 10 mm depth). The small laser diode is fixed at a certain distance (0 to 20 mm) from the imaging device and directly contacts the tissue. Light emitted from the laser diode penetrates through the tissue and reflects back to the imaging device without passing through any lenses …

Power-Weighted Lpc Formant Estimation, Ruairí De Fréin

Conference papers

A power-weighted formant frequency estimation procedure based on Linear Predictive Coding (LPC) is presented. It works by pre-emphasizing the dominant spectral components of an input signal, which allows a subsequent estimation step to extract formant frequencies with greater accuracy. The accuracy of traditional LPC formant estimation is improved by this new power-weighted formant estimator for different classes of synthetic signals and for speech. Power-weighted LPC significantly and reliably outperforms LPC and variants of LPC at the task of formant estimation using the VTR formants dataset, a database consisting of the Vocal Tract Resonance (VTR) frequency trajectories obtained by human experts …

Hexakis Icosahedron Frame-Skin Vacuum Lighter Than Air Vehicle, Brian Cranston, Anthony N. Palazotto

AFIT Patents

A vacuum lighter than air vehicle (VLTAV) includes a rigid frame of rods connected together to form a hexakis icosahedron. A membrane skin covers the rigid frame and defines therewith a vessel configured to hold an internal vacuum that allows the vessel to float in the air. The plurality of rods and membrane skin have weights and dimensions that result in a neutral and/or positive buoyancy for the vessel while preventing geometric instability.

Measurements Of Ear-Canal Cross-Sectional Areas From Live Human Ears With Implications For Wideband Acoustic Immittance Measurements, Susan E. Voss, Nicholas J. Horton, Katherine E. Fairbank, Lu Xia, Lauren R. K. Tinglin, Kathryn D. Girardin

Engineering: Faculty Publications

Wideband acoustic immittance (WAI) measures are noninvasive diagnostic measurements that require an estimate of the ear canal’s area at the measurement location. Yet, physical measurements of the area at WAI probe locations are lacking. Methods to measure ear-canal areas from silicone molds were developed and applied to 169 subjects, ages 18–75 years. The average areas at the canal’s first bend and at 12mm insertion depth, which are likely WAI probe locations, were 63:4613:5 and 61:6613:5mm2, respectively. These areas are substantially larger than those assumed by current FDA-approved WAI measurement devices as well as areas estimated with acoustical methods or measured …

Chemical Interfacial Reactions Affecting The Speciation And Solubility Of Uranium In Organic-Rich Environments, Carmen A. Velasco

Civil Engineering ETDs

The aim of this dissertation was to investigate the interfacial reactions between uranium (U) and natural organic matter NOM) affecting the solubility, adsorption, and precipitation of U in organic-rich environments. The chemical interactions between U and NOM are not well understood, which justified the following research objectives: 1) Identify the effect of pH on U speciation and the organic functional chemistry in mineralized deposits from the Jackpile Mine.; 2) Identify the precipitation of U(VI) and NOM as a function of pH (2, 4 and 7); 3) Identify changes in DOM chemistry due to the reaction of NOM and U at …

A Systematic Literature Review With Bibliometric Meta-Analysis Of Deep Learning And 3d Reconstruction Methods In Image Based Food Volume Estimation Using Scopus, Web Of Science And Ieee Database, Prachi Kadam, Nayana Petkar, Shraddha Phansalkar Dr.

Library Philosophy and Practice (e-journal)

Purpose- Estimation of food portions is necessary in image based dietary monitoring techniques. The purpose of this systematic survey is to identify peer reviewed literature in image-based food volume estimation methods in Scopus, Web of Science and IEEE database. It further analyzes bibliometric survey of image-based food volume estimation methods with 3D reconstruction and deep learning techniques.

Design/methodology/approach- Scopus, Web of Science and IEEE citation databases are used to gather the data. Using advanced keyword search and PRISMA approach, relevant papers were extracted, selected and analyzed. The bibliographic data of the articles published in the journals over the past …

The Effect Of Information Technology Audit For E-Health Of Indonesia Using Itil Framework V.3 Domain Service Design, Eva Mufidah, Ilham M, Anis Eliyana, Tanti Handriana, Indrianawati Usman

Library Philosophy and Practice (e-journal)

This study explain about E-Health Surabaya is a web-based health service technology application that is used to help people register as patients in hospitals and health centers. Although its function is very useful, there are also people who still do not understand how to use this application, there are also some shortcomings that cause inconvenience in its use. So that research is conducted in which the application uses ITIL V.3 framework with Domain Service Design to conduct an audit of the maturity level of this E-Health Surabaya Web Application. ITIL (Information Technology Infrastructure Technology) is a framework used to manage …

Aerosol Jet Printed Capacitive Strain Gauge For Soft Structural Materials, Kiyo T. Fujimoto, Jennifer K. Watkins, Timothy Phero, Takoda Bingham, Kshama Lakshmi Ranganatha, Benjamin C. Johnson, Zhangxian Deng, Brian Jaques, David Estrada

Materials Science and Engineering Faculty Publications and Presentations

Soft structural textiles, or softgoods, are used within the space industry for inflatable habitats, parachutes and decelerator systems. Evaluating the safety and structural integrity of these systems occurs through structural health monitoring systems (SHM), which integrate non-invasive/non-destructive testing methods to detect, diagnose, and locate damage. Strain/load monitoring of these systems is limited while utilizing traditional strain gauges as these gauges are typically stiff, operate at low temperatures, and fail when subjected to high strain that is a result of high loading classifying them as unsuitable for SHM of soft structural textiles. For this work, a capacitance based strain gauge (CSG) …

Multimodal Computational Modeling Of Visual Object Recognition Deficits But Intact Repetition Priming In Schizophrenia, Pejman Sehatpour, Anahita Bassir Nia, Devin Adair, Zhishun Wang, Heloise M. Debaun, Gail Silipo, Antigona Martinez, Daniel C. Javitt

Publications and Research

The term perceptual closure refers to the neural processes responsible for “filling-in” missing information in the visual image under highly adverse viewing conditions such as fog or camouflage. Here we used a closure task that required the participants to identify barely recognizable fragmented line-drawings of common objects. Patients with schizophrenia have been shown to perform poorly on this task. Following priming, controls and importantly patients can complete the line-drawings at greater levels of fragmentation behaviorally, suggesting an improvement in their ability to performthe task. Closure phenomena have been shown to involve a distributed network of cortical regions, notably the lateral …

Exploration Into The Use Of A Software Defined Radio As A Low-Cost Radar Front-End, Andrew Michael Monk

Theses and Dissertations

Inspection methods for satellites post-launch are currently expensive and/or dangerous. To address this, BYU, in conjunction with NASA, is designing a series of small satellites called CubeSATs. These small satellites are designed to be launched from a satellite and to visually inspect the launching body. The current satellite revision passively tumbles through space and is appropriately named the passive inspection cube satellite (PICS). The next revision actively maintains translation and rotation relative to the launching satellite and is named the translation, rotation inspection cube satellite (TRICS). One of the necessary sensors aboard this next revision is the means to detect …

Use Of Carbon Fiber Reinforced Polymer (Cfrp) Including Sheets, Rods, And Ropes In Strengthening And Repairing Long Reinforced Concrete Columns, Yasir Matloob Saeed

Dissertations and Theses

The use of FRP materials in strengthening and repairing of reinforced concrete (RC) structures has increased in the past two decades. Recently, FRP materials have become one of the most used materials in rehabilitation engineering. For seismic retrofitting of RC structures, usually the process involves strengthening or repairing the vertical support elements of the buildings or bridges. Several studies focused on the use of FRP materials in strengthening and repairing RC columns. Externally bonded (EB) FRP sheets or laminates and near-surface-mounted (NSM) FRP rods have been used for enhancing the strength and ductility of RC columns. Although glass FRP (GFRP) …

Phenotyping Of Hypertensive Heart Disease And Hypertrophic Cardiomyopathy Using Personalized 3d Modeling And Cardiac Magnetic Resonance Imaging, Chuah Shoon Hui

Student Works (2020-2029)

Differential diagnosis of hypertensive heart disease (HHD) and hypertrophic cardiomyopathy (HCM) is clinically challenging but important for treatment management. This study aims to phenotype HHD and HCM in 3D+time domain by using a multiparametric motion-corrected personalized modeling algorithm and cardiac magnetic resonance (CMR). 44 CMR data, including 12 healthy, 16 HHD and 16 HCM cases, were examined. Multiple CMR phenotype data consisting of geometric and dynamic variables were extracted globally and regionally from the models over a full cardiac cycle for comparison against the healthy models and clinical reports. Statistical classifications were used to identify the distinctive characteristics and disease …

Study On Cation Exchange Of A Lead Coordination Polymer Targeting Dynamic Mixed Cation Doped And Mixed-Valent Coordination Polymers, Hamisu Aliyu Mohammed

Student Works (2020-2029)

Solid solution in Metal-Organic Coordination Polymers (MOCPs) is an emerging synthetic pathway for modifying chemical compositions and has been expansively investigated. It has been demonstrated to be an important tool for engineering novel functional materials that otherwise have not been synthesized via the conventional technique. Although stable solid material with variable functionalities and intriguing structural motifs could be engineered by judicious selection of multivariate metal centers and multifunctional ligands. However, solid solution featuring mixed valence in MOCP is rare. Motivated by the ability of Pb2+ to adopt range of coordination numbers (CN) and chemical environments (CE), in addition to its …

Analysis Of Electric Vehicle Charging Behavior Patterns With Function Principal Component Analysis Approach, Chenxi Chen, Yang Song, Xianbiao Hu, Ivan G. Guardiola

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This manuscript focused on analyzing electric vehicles’ (EV) charging behavior patterns with a functional data analysis (FDA) approach, with the goal of providing theoretical support to the EV infrastructure planning and regulation, as well as the power grid load management. 5-year real-world charging log data from a total of 455 charging stations in Kansas City, Missouri, was used. The focuses were placed on analyzing the daily usage occupancy variability, daily energy consumption variability, and station-level usage variability. Compared with the traditional discrete-based analysis models, the proposed FDA modeling approach had unique advantages in preserving the smooth function behavior of the …

Reading And Programming Spintronic Devices For Biomimetic Applications And Fault-Tolerant Memory Design, Kawsher Ahmed Roxy

USF Tampa Graduate Theses and Dissertations

Despite the triumph of conventional computing architectures till today, there emerges a lotof computing problems that are solved poorly by them. The reason behind this are twofold: i) the computing algorithm is incompetent in solving those problems, and ii) non-ideal effects of the traditional device technologies outperform the benets of using them. Hence, extensive research eorts have been put to devise novel algorithms as well as new devices. Among them spintronic devices demonstrate better performance in traditional architectures as well as offers way better solution to a lot of new problems when bundled with unconventional computing algorithms. Apart from being …

Advanced Concepts For Multiengine Airplane Flying, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Webinar (GL15102159) held online at 9:00 CST on Saturday, November 21, 2020.

Fluid-Driven Fracture Initiation From Oil And Gas Wells Considering Lifetime Stresses, Andreas Michael

LSU Doctoral Dissertations

Fluid-driven fracture initiation from oil and gas wells is examined in detail. The dissertation covers three subtopics: drilling, completion (stimulations), and post-blowout capping-induced fracture initiation.

Drilling-induced tensile fractures (DITFs) are located in an azimuth orthogonal to wellbore breakouts and are observed from image logs obtained during drilling operations. Fully analytical criteria for the orientation of DITFs initiating from wells in porous, permeable media are derived considering fluid infiltration from a pressurized wellbore. DITF orientation (longitudinal or transverse-to-the-wellbore) is used to constrain the magnitude of the local maximum horizontal principal stress. The range of the possible stress states is indicated on …

Demystifying Artificial Intelligence Based Digital Twins In Manufacturing- A Bibliometric Analysis Of Trends And Techniques, Satish Kumar, Shruti Patil, Arunkumar Bongale, Ketan Kotecha, Anup Kumar M. Bongale, Pooja Kamat

Library Philosophy and Practice (e-journal)

Nowadays, data is considered as a new life force for operations of physical systems in various domains such as manufacturing, healthcare, transportations, etc. However, the hugely generated data, which mirrors the working essence of the product life cycle, is still underutilised. Digital Twin (DT), a collective representation of active and passive captured data, is a virtual counterpart of the physical resources that could help prevent effective preventive maintenance in any applied domain. Currently, lots of research is going on about the applicability of digital twin in smart IOT based manufacturing industry 4.0 environment. Still, it lacks a formal study, which …

Covid-19 And Mental Health/Substance Use Disorders On Reddit: A Longitudinal Study, Amanuel Alambo, Swati Padhee, Tanvi Banerjee, Krishnaprasad Thirunarayan

Computer Science and Engineering Faculty Publications

COVID-19 pandemic has adversely and disproportionately impacted people suffering from mental health issues and substance use problems. This has been exacerbated by social isolation during the pandemic and the social stigma associated with mental health and substance use disorders, making people reluctant to share their struggles and seek help. Due to the anonymity and privacy they provide, social media emerged as a convenient medium for people to share their experiences about their day to day struggles. Reddit is a well-recognized social media platform that provides focused and structured forums called subreddits, that users subscribe to and discuss their experiences with …

Modelling And Determination Of Rational Parameters Of Blast Wells During Preliminary Crevice Formation In Careers, Sherzod Sharipovich Zairov, Sherali Raufovich Urinov, Rustam Uralovich Nomdorov

Chemical Technology, Control and Management

Recommended solutions to reduce the width of the zone of residual deformation, set the parameters and delineation of charges for shielding the slit with enhanced protective capacity and selected parameters of blasting in the marginal zone, ensuring the creation of the shielding slit with high protective ability. The dependence of changes in the diameter of a contour well, the linear mass of the contour charge and the distance between contour wells on the physical and mechanical properties of rocks and energy indicators of industrial explosives is established.

Basic Characteristics Of Thermal Converters For Controlling Of Humidity Of Liquid Materials, N.I. Avezova, P.R. Ismatullaev, P.M. Matyakubova

Chemical Technology, Control and Management

In the article, the static characteristics of thermal converters of liquid materials are investigated for three possible operating modes: - at a constant heating power; - at constant temperature difference; - with discrete switching on and off of the heating element. It is shown: that a simpler and more reliable mode of operation: at a more linear static characteristic occurs at mode.It is shown that the reliability of thermal converters of moisture content in liquid materials in tracking gradual failures, taking into account destabilizing factors, when the error of the converters is not more than.

Optical Method For Determining Antioxidant Activity, V.Kh. Shamsutdinova

Chemical Technology, Control and Management

The paper considers the main photophysical processes involving excited molecules of luminophores and oxygen and proposes a functional diagram of a device that implements an optical method for determining the antioxidant activity of products by the integrated intensity of luminescence in the presence and absence of oxidized oxygen, the achievement of the technical result of which is ensured by a special luminescent element sensitive to oxygen with a luminescence activator introduced into it, and also revealed ways to increase the useful signal in order to improve the ratio of the useful signal to noise and increase the susceptibility of low …