Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 52351 - 52380 of 197093

Full-Text Articles in Engineering

High-Frequency Modeling Of Permanent Magnet Synchronous Motor Considering Internal Imbalances, Yuandong Guo, Muqi Ouyang, Zhifei Xu, Minho Kim, Junesang Lee, Jungrae Ha, Hyewon Lee, Sangwon Yun, Jun Fan, Hongseok Kim Jan 2021

High-Frequency Modeling Of Permanent Magnet Synchronous Motor Considering Internal Imbalances, Yuandong Guo, Muqi Ouyang, Zhifei Xu, Minho Kim, Junesang Lee, Jungrae Ha, Hyewon Lee, Sangwon Yun, Jun Fan, Hongseok Kim

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, an accurate high-frequency modeling methodology for a permanent magnet synchronous motor (PMSM) in a vehicular electrical braking system is presented, which is suitable for analyzing various electromagnetic interference problems caused by a motor drive system. The proposed modeling approach is established according to the vector fitting technique and based on the S-parameter measurements of the PMSM. The equivalent circuit model of the PMSM converted from a measured S-parameter matrix can better describe the impedance characteristics of the three-phase PMSM under study compared to the existing equivalent circuit models because the imbalances inside the motor are taken into …

Go to article

Simulation And Modeling Of Hypersonic Turbulent Boundary Layers Subject To Adverse Pressure Gradients Due To Concave Streamline Curvature, Gary L. Nicholson, Junji Huang, Lian Duan, Meelan M. Choudhari Jan 2021

Simulation And Modeling Of Hypersonic Turbulent Boundary Layers Subject To Adverse Pressure Gradients Due To Concave Streamline Curvature, Gary L. Nicholson, Junji Huang, Lian Duan, Meelan M. Choudhari

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Direct numerical simulations (DNS) of adverse-pressure-gradient turbulent boundary layers over a planar concave wall are presented for a nominal freestream Mach number of 5, with the objective of assessing the limitations of the currently available Reynolds-averaged Navier-Stokes (RANS) models. The wall geometry and flow conditions of the DNS are representative of the experimental data for a Mach 4.9 turbulent boundary layer that was tested on a two-dimensional planar concave wall model in the high-speed blow-down wind tunnel located at the National Aerothermochemistry Laboratory at Texas A&M University (TAMU). The DNS was validated against the experimental results of TAMU for the …

Go to article

Review On Resistive Switching Mechanisms Of Bio-Organic Thin Film For Non-Volatile Memory Application, Kuan Yew Cheong, Ilias Ait Tayeb, Feng Zhao, Jafri Malin Abdullah Jan 2021

Review On Resistive Switching Mechanisms Of Bio-Organic Thin Film For Non-Volatile Memory Application, Kuan Yew Cheong, Ilias Ait Tayeb, Feng Zhao, Jafri Malin Abdullah

Electrical and Computer Engineering Faculty Research & Creative Works

Bio-organic, as one of the sustainable and bioresorbable materials, has been used as an active thin film in producing resistive switching random access memory (RRAM) due to its specialized properties. This type of nonvolatile memory consists of a simple unit structure with the processed and solidified bio-organic-based thin film sandwiched between two electrodes. Its memory characteristics are significantly affected by the resistive-switching mechanism. However, to date, the reported mechanisms are very diverse and scattered, and to our best knowledge, there is no literature that reviewed comprehensively the mechanisms of resistive switching in bio-organic-based thin films. Therefore, the objective of this …

Go to article

Effect Of Nb On Β→Α″ Martensitic Phase Transformation And Characterization Of New Biomedical Ti-Xnb-3fe-9zr Alloys, Syed Faraz Jawed, Chirag Dhirajlal Rabadia, Fahad Azim, Saad Jawaid Khan Jan 2021

Effect Of Nb On Β→Α″ Martensitic Phase Transformation And Characterization Of New Biomedical Ti-Xnb-3fe-9zr Alloys, Syed Faraz Jawed, Chirag Dhirajlal Rabadia, Fahad Azim, Saad Jawaid Khan

Research outputs 2014 to 2021

A new generation of Ti-xNb-3Fe-9Zr (x=15, 20, 25, 30, 35 wt %) alloys have been designed using various theoretical approaches including DV-xα cluster, molybdenum equivalency, and electron to atom ratio. Afterward, designed alloys are fabricated using cold crucible levitation melting technique. The microstructure and mechanical performances of newly designed alloys are characterized in this work using scanning electron microscope and universal testing machine, respectively. Each alloy demonstrates monolithic β phase except Ti-35Nb-3Fe-9Zr alloy which display dual α″+β phases. Typically, niobium acts as an isomorphous beta stabilizer. However, in this work, formation of martensitic α″ phases occurs at 35 wt % …

Go to article

Realization And Optimization Of Optical Logic Gates Using Bias Assisted Carrier-Injected Triple Parallel Microring Resonators, Fayza Kizhakkakath, Sooraj Ravindran, Kwangwook Park, Kamal Alameh, Yong Tak Lee Jan 2021

Realization And Optimization Of Optical Logic Gates Using Bias Assisted Carrier-Injected Triple Parallel Microring Resonators, Fayza Kizhakkakath, Sooraj Ravindran, Kwangwook Park, Kamal Alameh, Yong Tak Lee

Research outputs 2014 to 2021

We propose a p-i-n diode embedded parallel triple microring resonator (MRR) configuration to simultaneously realize optical OR and AND, or NAND and NOR logic gates using a bias-assisted carrier injection mechanism. The applied bias on the rings induces refractive index change in the intrinsic region through bandfilling, bandgap shrinkage and free carrier absorption effects, leading to intensity variation at the output ports of the MRR due to respective resonant wavelength shift. The optical logic gate operational outputs are represented as the light intensities at the output ports of the MRR with the wavelength of the input optical signal launched into …

Go to article

Novel Adaptive Sampling Algorithm For Pod-Based Non-Intrusive Reduced Order Model, Jiachen Wang, Xiaosong Du, Joaquim R.R.A. Martins Jan 2021

Novel Adaptive Sampling Algorithm For Pod-Based Non-Intrusive Reduced Order Model, Jiachen Wang, Xiaosong Du, Joaquim R.R.A. Martins

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The proper orthogonal decomposition (POD) based reduced-order model (ROM) has been an effective tool for flow field prediction in the engineering industry. The sample selection in the design space for POD basis construction affects the ROM performance sensitively. Adaptive sampling can significantly reduce the number of samples to achieve the required model accuracy. In this work, we propose a novel adaptive sampling algorithm, called conjunction sampling strategy, which is based on proven strategies. The conjunction sampling strategy is demonstrated on airfoil flow field prediction within the transonic regime. We demonstrate the performance of the proposed strategy by running 10 trials …

Go to article

A Convolutional Neural Network Model Based On Multiscale Structural Similarity For The Prediction Of Flow Fields, Yifu An, Xiaosong Du, Joaquim R.R.A. Martins Jan 2021

A Convolutional Neural Network Model Based On Multiscale Structural Similarity For The Prediction Of Flow Fields, Yifu An, Xiaosong Du, Joaquim R.R.A. Martins

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We have seen the emerging applications of deep neural networks for flow field predictions in the past few years. Most of the efforts rely on the increased complexity of the model itself or take advantage of novel network architectures, such as convolutional neural networks (CNN). However, reaching low prediction error cannot guarantee the quality of the predicted flow fields in terms of the perceived visual quality. This work introduces the multi-scale structural similarity (MS-SSIM) index method for flow field prediction. First, we train CNN models using the commonly used root mean squared error (RMSE) loss function as the reference. Then …

Go to article

A Multi-Elm Model For Incomplete Data, Baichuan Chi, Amaury Lendasse, Edward Ratner, Renjie Hu Jan 2021

A Multi-Elm Model For Incomplete Data, Baichuan Chi, Amaury Lendasse, Edward Ratner, Renjie Hu

Engineering Management and Systems Engineering Faculty Research & Creative Works

This Paper Presents a Novel Model of Extreme Learning Machines (Elms) for Incomplete Data. Elms Are Fast Accurate Randomized Neural Networks. Nevertheless, Elm Can Only Be Applied on the Complete Dataset. Therefore, a Novel Multi-Elm Model for Incomplete Data is Proposed, Consisting of Multiple Secondary Elms and One Primary Elm. the Secondary Elms Are Approximating the Primary Elm's Hidden Neurons' Outputs for the Data with Missing Values. as Summarized in the Experimental Section, This Model Can Be Applied on Data with Any Missing Patterns, without using Imputations and Can Outperform the Traditional Imputation Methods within a Reasonable Fraction of Missing …

Go to article

Frequency Estimation From Compressed Measurements Of A Sinusoid In Moving‐Average Colored Noise, Nuha A. S. Alwan, Zahir M. Hussain Jan 2021

Frequency Estimation From Compressed Measurements Of A Sinusoid In Moving‐Average Colored Noise, Nuha A. S. Alwan, Zahir M. Hussain

Research outputs 2014 to 2021

Frequency estimation of a single sinusoid in colored noise has received a considerable amount of attention in the research community. Taking into account the recent emergence and advances in compressive covariance sensing (CCS), the aim of this work is to combine the two disci-plines by studying the effects of compressed measurements of a single sinusoid in moving‐average colored noise on its frequency estimation accuracy. CCS techniques can recover the second‐order statistics of the original uncompressed signal from the compressed measurements, thereby enabling correlation‐based frequency estimation of single tones in colored noise using higher order lags. Ac-ceptable accuracy is achieved for …

Go to article

Relationship Between Pressure And Output Parameters In Belt Grinding Of Steels And Nickel Alloy, Nelli V. Syreyshchikova, Danil Y. Pimenov, Munish K. Gupta, Krzysztof Nadolny, Khaled Giasin, Muhammad Aamir, Shubham Sharma Jan 2021

Relationship Between Pressure And Output Parameters In Belt Grinding Of Steels And Nickel Alloy, Nelli V. Syreyshchikova, Danil Y. Pimenov, Munish K. Gupta, Krzysztof Nadolny, Khaled Giasin, Muhammad Aamir, Shubham Sharma

Research outputs 2014 to 2021

Belt grinding of flat surfaces of typical parts made of steel and alloys, such as grooves, shoulders, ends, and long workpieces, is a good alternative to milling. Several factors can influence the belt grinding process of flat surfaces of metals, such as cutting speed and pressure. In this work, the importance of pressure in the belt grinding was investigated in terms of technological and experimental aspects. The grinding experiments were performed on structural alloy steel 30KhGSN2/30KhGSNA, structural carbon steel AISI 1045, corrosion-resistant and heat-resistant stainless steel AISI 321, and heat-resistant nickel alloy KHN77TYuR. The performance of the grinding belt was …

Go to article

Analysis And Optimization Of Process Parameters In Abrasive Waterjet Contour Cutting Of Aisi 304l, Jennifer M. Llanto, Ana Vafadar, Muhammad Aamir, Majid Tolouei-Rad Jan 2021

Analysis And Optimization Of Process Parameters In Abrasive Waterjet Contour Cutting Of Aisi 304l, Jennifer M. Llanto, Ana Vafadar, Muhammad Aamir, Majid Tolouei-Rad

Research outputs 2014 to 2021

Abrasive waterjet machining is applied in various industries for contour cutting of heat-sensitive and difficult-to-cut materials like austenitic stainless steel 304L, with the goal of en-suring high surface integrity and efficiency. In alignment with this manufacturing aspiration, experimental analysis and optimization were carried out on abrasive waterjet machining of austenitic stainless steel 304L with the objectives of minimizing surface roughness and maximizing material removal rate. In this machining process, process parameters are critical factors influencing contour cutting performance. Accordingly, Taguchi’s S/N ratio method has been used in this study for the optimization of process parameters. Further in this work, the …

Go to article

Analysis Of Microstructure And Mechanical Properties Of Bismuth-Doped Sac305 Lead-Free Solder Alloy At High Temperature, Umair Ali, Hamza Khan, Muhammad Aamir, Khaled Giasin, Numan Habib, Muhammad Owais Awan Jan 2021

Analysis Of Microstructure And Mechanical Properties Of Bismuth-Doped Sac305 Lead-Free Solder Alloy At High Temperature, Umair Ali, Hamza Khan, Muhammad Aamir, Khaled Giasin, Numan Habib, Muhammad Owais Awan

Research outputs 2014 to 2021

SAC305 lead-free solder alloy is widely used in the electronic industry. However, the problems associated with the growth formation of intermetallic compounds need further research, especially at high temperatures. This study investigates the doping of Bismuth into SAC305 in the various compositions of 1, 2, and 3 wt.%. The microstructure in terms of intermetallic compound particles and mechanical properties was examined after thermal aging at temperatures of 100◦C and 200◦C for 60 h. The microstructure examination was observed using scanning electron microscopy, and the chemical composition of each alloy was confirmed with an energy dispersive X-ray. Tensile tests were performed …

Go to article

The Effect Of Cryogenic Machining Of S2 Glass Fibre Composite On The Hole Form And Dimensional Tolerances, Ugur Koklu, Sezer Morkavuk, Carol Featherston, Malik Haddad, David Sanders, Muhammad Aamir, Danil Yu Pimenov, Khaled Giasin Jan 2021

The Effect Of Cryogenic Machining Of S2 Glass Fibre Composite On The Hole Form And Dimensional Tolerances, Ugur Koklu, Sezer Morkavuk, Carol Featherston, Malik Haddad, David Sanders, Muhammad Aamir, Danil Yu Pimenov, Khaled Giasin

Research outputs 2014 to 2021

S2 glass fibre reinforced epoxy composites are widely used in aeronautical applications owing to their excellent strength to weight ratio. Drilling glass fibres can be cumbersome due to their abrasive nature and poor thermal conductivity. Moreover, the use of conventional coolants is not desirable due to contamination and additional costs for cleaning the machine part. An alternative is to use environmentally friendly coolants such as liquid nitrogen (LN2) which have been previously employed in machining metals and composites. The current study investigates the effect of drilling S2 glass fibre composite in a bath of LN2. The study aims to evaluate …

Go to article

Geochemical Study Of The Early Cretaceous Fahliyan Oil Reservoir In The Northwest Persian Gulf, Abbas Khaksar Manshad, Reza Sedighi Pashaki, Jagar A. Ali, Stefan Iglauer, M. Memariani, Majid Akbari, Alireza Keshavarz Jan 2021

Geochemical Study Of The Early Cretaceous Fahliyan Oil Reservoir In The Northwest Persian Gulf, Abbas Khaksar Manshad, Reza Sedighi Pashaki, Jagar A. Ali, Stefan Iglauer, M. Memariani, Majid Akbari, Alireza Keshavarz

Research outputs 2014 to 2021

Three crude oil samples from the Fahliyan Formation in ‘KG’ and ‘F’ fields in the northwest Persian Gulf, namely KG-031, F9A-3H and F15-3H for the geochemical study. In this study, the physicochemical properties, gas chromatography (GC, GC Mass) and (Detailed Hydrocarbon Analysis) DHA analyses for the collected Fahliyan oils were carried out. The API, Trace Element (Ni, V) and S% parameters indicated that the Fahliyan oil was generated from a source rock which deposited in reducing environment condition with a carbonate-shale compound lithology. Moreover, low pour point, higher S% and low viscosity parameters of “KG” sample confirmed the existence of …

Go to article

Design And Perspective Of Amorphous Metal Nanoparticles From Laser Synthesis And Processing, Shun-Xing Liang, Lai-Chang Zhang, Sven Reichenberger, Stephan Barcikowski Jan 2021

Design And Perspective Of Amorphous Metal Nanoparticles From Laser Synthesis And Processing, Shun-Xing Liang, Lai-Chang Zhang, Sven Reichenberger, Stephan Barcikowski

Research outputs 2014 to 2021

Amorphous metal nanoparticles (A-NPs) have aroused great interest in their structural disordering nature and combined downsizing strategies (e.g. nanoscaling), both of which are beneficial for highly strengthened properties compared to their crystalline counterparts. Conventional synthesis strategies easily induce product contamination and/or size limitations, which largely narrow their applications. In recent years, laser ablation in liquid (LAL) and laser fragmentation in liquid (LFL) as "green"and scalable colloid synthesis methodologies have attracted extensive enthusiasm in the production of ultrapure crystalline NPs, while they also show promising potential for the production of A-NPs. Yet, the amorphization in such methods still lacks sufficient rules …

Go to article

Class Distribution-Aware Adaptive Margins And Cluster Embedding For Classification Of Fruit And Vegetables At Supermarket Self-Checkouts, Khurram Hameed, Douglas Chai, Alexander Rassau Jan 2021

Class Distribution-Aware Adaptive Margins And Cluster Embedding For Classification Of Fruit And Vegetables At Supermarket Self-Checkouts, Khurram Hameed, Douglas Chai, Alexander Rassau

Research outputs 2014 to 2021

The complex task of vision based fruit and vegetables classification at a supermarket self-checkout poses significant challenges. These challenges include the highly variable physical features of fruit and vegetables i.e. colour, texture shape and size which are dependent upon ripeness and storage conditions in a supermarket as well as general product variation. Supermarket environments are also significantly variable with respect to lighting conditions. Attempting to build an exhaustive dataset to capture all these variations, for example a dataset of a fruit consisting of all possible colour variations, is nearly impossible. Moreover, some fruit and vegetable classes have significant similar physical …

Go to article

Experimental Study On Repeatedly Loaded Foundation Soil Strengthened By Wraparound Geosynthetic Reinforcement Technique, Muhammad Nouman Amjad Raja, Sanjay K. Shukla Jan 2021

Experimental Study On Repeatedly Loaded Foundation Soil Strengthened By Wraparound Geosynthetic Reinforcement Technique, Muhammad Nouman Amjad Raja, Sanjay K. Shukla

Research outputs 2014 to 2021

In the recent past, the potential benefits of wraparound geosynthetic reinforcement technique for constructing the reinforced soil foundations have been reported. This paper presents the experimental study on the behaviour of model strip footing resting on sandy soil bed reinforced with geosynthetic in wraparound and planar forms under monotonic and repeated loadings. The geosynthetic layers were laid according to the reinforcement ratio to minimise the scale effect. It is found that for the same amount of reinforcement material, the wraparound reinforced model resulted in less settlement in comparison to planar reinforced models. The efficiency of wraparound reinforced model increased with …

Go to article

Quantifying The Benefits Of In-Time And In-Place Responses To Remediate Acute Lnapl Release Incidents, Kaveh S. Lari, Andrew King, John L. Rayner, Greg B. Davis Jan 2021

Quantifying The Benefits Of In-Time And In-Place Responses To Remediate Acute Lnapl Release Incidents, Kaveh S. Lari, Andrew King, John L. Rayner, Greg B. Davis

Research outputs 2014 to 2021

Acute large volume spills from storage tanks of petroleum hydrocarbons as light non aqueous phase liquids (LNAPLs) can contaminate soil and groundwater and may have the potential to pose explosive and other risks. In consideration of an acute LNAPL release scenario, we explore the value of a rapid remediation response, and the value of installing remediation infrastructure in close proximity to the spill location, in effecting greater recovery of LNAPL mass from the subsurface. For the first time, a verified three-dimensional multi-phase numerical framework and supercomputing resources was applied to explore the significance of in-time and in-place remediation actions. A …

Go to article

The North Sky And The Otherworld: Journeys Of The Dead In The Neolithic Considered, Frank Prendergast Jan 2021

The North Sky And The Otherworld: Journeys Of The Dead In The Neolithic Considered, Frank Prendergast

Book/Book Chapter

The majority of Irish passage tombs (c. 230) predominantly date to the Middle Neolithic (c. 3600–3000 BC). A small number of summit cairns may also contain passage tombs because of their round form, proximity and intervisibility. The island’s passage tombs and related cairns share distinguishing characteristics – elevated siting, visibility and long-range views of distant horizons in varying directions of the compass. This chapter presents the findings of the first scenic analysis of the horizon and views at these sites recorded at an island scale. The method uses measured orientations of horizon sectors related to observed variation in horizon range. …

Go to article

Bim - Route For The Qs Into The 4d And 5d Digitised Workflow, 1st Ed., Dermot Kehily Dr Jan 2021

Bim - Route For The Qs Into The 4d And 5d Digitised Workflow, 1st Ed., Dermot Kehily Dr

Other

Building Information Modelling (BIM) has the potential to increase effi ciency in the construction industry by changing traditional 2 Dimensional (2D) information exchange to a method of delivery that promotes collaboration and integration across the construction supply chain. From a Quantity Surveyor (QS) perspective, BIM offers capabilities to generate Quantity Take-Off (QTO) directly from a 3 Dimensional (3D) model. This paper outlines the 4 Dimensional (4D - Planning) and 5 Dimensional (5D - Cost) process. It also addresses some of the issues that the QS may come up against when generating and using BIM quantities and some diffi culties when …

Go to article

A New Epoch For Community Renewable Energy Co-Operatives In Ireland? An Exploration Of The Factors Influencing Their Development, Gerard Doyle Jan 2021

A New Epoch For Community Renewable Energy Co-Operatives In Ireland? An Exploration Of The Factors Influencing Their Development, Gerard Doyle

Articles

The paper outlines the capacities required for community groups to successfully establish and maintain renewable energy co-operatives in Ireland. The paper finds that community groups that successfully establish renewable energy co-operatives must possess high levels of resilience, have access to technical expertise, and have appropriate finance. It also highlights how it is crucial that at least one member of each renewable energy co-operative engages with state agencies and the community. Pringle’s (2015) theoretical framework applied in this paper focuses on the capacities required for the successful implementation of community renewable energy projects (which include community renewable energy co-operatives) in rural …

Go to article

Considering Children’S Travel Needs: Perceptions Of Transport Planning Professionals In Ireland, Sarah Mcdonagh, Sarah Rock Jan 2021

Considering Children’S Travel Needs: Perceptions Of Transport Planning Professionals In Ireland, Sarah Mcdonagh, Sarah Rock

Conference Papers

In recent years it has been reported that in an international comparison of children’s independent mobility that Ireland has one of the lowest rates of both children’s independent mobility and active travel among several countries (Shaw et al., 2015). Children’s independent mobility and active travel are shown to be affected by several factors including parental time pressures and lifestyle choices; societal fears (‘stranger danger’); and the fear of traffic and road safety (Shaw et al., 2015, Hillman et al., 1990; Lynch, 1977; Johansson, 2006; Shaw et al., 2013; and Zwerts et al., 2010). This research focuses on the latter – …

Go to article

Near-Field Propagation Analysis For Vivaldi Antenna Design: Insight Into The Propagation Process For Optimizing The Directivity, Integrity Of Signal Transmission, And Efficiency, Ha Hoang, Matthias John, Patrick Mcevoy, Max Ammann Jan 2021

Near-Field Propagation Analysis For Vivaldi Antenna Design: Insight Into The Propagation Process For Optimizing The Directivity, Integrity Of Signal Transmission, And Efficiency, Ha Hoang, Matthias John, Patrick Mcevoy, Max Ammann

Articles

Refined optimization of complex curve–linear-shaped radiators, such as traveling-wave Vivaldi antennas, can be achieved by considering simulated near fields to interpret in detail the structural influences of a design. The relationships between the space and time distributions of electromagnetic (EM) energy clusters and the geometric features are revealed with appropriate use of impulse response analysis combined with the multiple signal classification (MUSIC) algorithm. This article reports a deeper approach when applied to the adjustment of the geometric features of a traveling-wave antenna based on an analysis of near-field propagation features.

Go to article

Prediction Of Equivalent Liquid Permeability From Gas Permeability Measurements: A Recurrent Neural Network Approach, Husam Alkinani, Abo Taleb Al-Hameedi, Shari Dunn-Norman Jan 2021

Prediction Of Equivalent Liquid Permeability From Gas Permeability Measurements: A Recurrent Neural Network Approach, Husam Alkinani, Abo Taleb Al-Hameedi, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

One of the most vital reservoir properties is permeability. It is usually measured using core samples with two major measurement methods: using gas or using liquid. The purpose of this work is to use a data-driven recurrent neural network model to estimate the equivalent liquid permeability based on gas permeability. By using this model, the equivalent liquid permeability can be predicted for the permeability of core samples with rich clay minerals measured using gas (or any core sample that is measured using gas). This will give an alternative way to the currently used method (Klinkenberg method). Core sample data measurements …

Go to article

Minimizing Lost Circulation Non-Productive Time Using Expected Monetary Value And Decision Tree Analysis, Husam Hasan Alkinani, Abo Taleb Tuama Al-Hameedi, Shari Dunn-Norman Jan 2021

Minimizing Lost Circulation Non-Productive Time Using Expected Monetary Value And Decision Tree Analysis, Husam Hasan Alkinani, Abo Taleb Tuama Al-Hameedi, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Lost circulation and problems related to drilling present a major challenge for the drilling industry. Each year, billions are spent to treat these problems. There is not a single solution to lost circulation because of the complexity and kind of formations susceptible to this issue. Lost circulation treatment data for the Shuaiba formation (induced fractured formation) were gathered from drilled wells in Southern Iraq (over 2000). Treatments have been grouped according to the volume of mud loss as complete, severe, and partial loss remedies. Detailed costs and probabilities calculations were conducted. The costs of three types of loss treatments (partial, …

Go to article

Will Carbon Dioxide Injection In Shale Reservoirs Produce From The Shale Matrix, Natural Fractures, Or Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam Jan 2021

Will Carbon Dioxide Injection In Shale Reservoirs Produce From The Shale Matrix, Natural Fractures, Or Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Enhanced oil recovery (EOR) in shale reservoirs has been recently shown to increase oil recovery significantly from this unconventional oil and gas source. One of the most studied EOR methods in shale reservoirs is gas injection, with a focus on carbon Dioxide (CO2) mainly due to the ability to both enhance oil recovery and store the CO2 in the formation. Even though several shale plays have reported an increase in oil recovery using CO2 injection, in some cases this method failed severely. This research attempts to investigate the ability of the CO2 to mobilize crude …

Go to article

Impact Of Rheology Models On Horizontal Well Polymer Flooding In A Heavy Oil Reservoir On Alaska North Slope: A Simulation Study, Jianqiao Leng, Mingzhen Wei, Baojun Bai, Randall S. Seright, Yin Zhang, David Cercone, Samson Ning Jan 2021

Impact Of Rheology Models On Horizontal Well Polymer Flooding In A Heavy Oil Reservoir On Alaska North Slope: A Simulation Study, Jianqiao Leng, Mingzhen Wei, Baojun Bai, Randall S. Seright, Yin Zhang, David Cercone, Samson Ning

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer rheology can have either a positive or a negative effect on polymer flooding performance under varied circumstances. Many researchers have studied the effect of polymer rheology in a vertical well, but no field scale studies have been conducted to investigate whether polymer rheology is beneficial to polymer flooding in heavy oil reservoirs developed by horizontal wells. In this paper, we conducted a numerical simulation study to examine the effect of HPAM polymer rheology on a polymer flooding pilot, which is the first-ever project conducted on a heavy oil reservoir from Alaska North Slope (ANS) developed by horizontal wells. Three …

Go to article

First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska's North Slope Pushing Ahead One Year Later, Abhijit Dandekar, Baojun Bai, John Barnes, Dave Cercone, Jared Ciferno, Reid Edwards, Samson Ning, Walbert Schulpen, Randy Seright, Brent Sheets, Dongmei Wang, Yin Zhang Jan 2021

First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska's North Slope Pushing Ahead One Year Later, Abhijit Dandekar, Baojun Bai, John Barnes, Dave Cercone, Jared Ciferno, Reid Edwards, Samson Ning, Walbert Schulpen, Randy Seright, Brent Sheets, Dongmei Wang, Yin Zhang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In June 2018 the team embarked on an ambitious project to address the slow development pace of Alaska's 20+ billion barrels heavy oil resource via the first ever polymer flood pilot. Following the successful commencement of the pilot in August 2018, the field demonstration, supporting laboratory experiments and numerical simulation have steadily progressed. A significant amount of valuable data and lessons learned have been collected and are reported in this paper. The ongoing pilot and the research activities is making headway toward the primary objective of validating the use of polymer flooding for extracting heavy oil in Alaska's challenging environment. …

Go to article

Delayed Fast Neutron As An Indicator Of Burn-Up For Nuclear Fuel Elements, Tayfun Akyurek, Shoaib Usman, S. B. Shoaib Jan 2021

Delayed Fast Neutron As An Indicator Of Burn-Up For Nuclear Fuel Elements, Tayfun Akyurek, Shoaib Usman, S. B. Shoaib

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Feasibility study of burn-up analysis and monitoring using delayed fast neutrons was investigated at Missouri University of Science and Technology Reactor (MSTR). Burnt and fresh fuel elements were used to collect delayed fast neutron data for different power levels. Total reactivity varied depending on the burn-up rate of fuel elements for each core configuration. The regulating rod worth was 2.07E-04 Δk/k/in and 1.95E-04 Δk/k/in for T121 and T122 core configurations at 11 inch, respectively. Delayed fast neutron spectrum of F1 (burnt) and F16 (fresh) fuel elements were analyzed further, and a strong correlation was observed between delayed fast neutron emission …

Go to article

Regional 3d Stability Analyses Of The Egkremnoi Coastline And Comparison With Landslides Caused By The 2015 Lefkada Earthquake, Weibing Gong, Dimitrios Zekkos, Marin Clark, John Manousakis, Dalia Kirshbaum Jan 2021

Regional 3d Stability Analyses Of The Egkremnoi Coastline And Comparison With Landslides Caused By The 2015 Lefkada Earthquake, Weibing Gong, Dimitrios Zekkos, Marin Clark, John Manousakis, Dalia Kirshbaum

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Regional three-dimensional (3D) forward modeling stability analyses are presented for the Egkremnoi coastline of Lefkada Island in Greece. The pre-earthquake 5-m resolution DEM of the region was used as input for the regional 3D model and the modeling results were evaluated for five large landslides that occurred in the area during a Mw 6.5 earthquake that occurred in 2015. The area ratio and the overlap area ratio were defined to quantitatively assess the geospatial "match" between predicted and mapped landslides. Parametric analyses using variable material strength and DEM resolution were subsequently conducted to assess the influence of the input on …

Go to article

First Prev Next Last