Engineering Commons^™

A Novel Rheological Technique To Measure The Yield Stress In Equibiaxial Elongation, Asher Segal

Theses

Yield stress measurement in non-Newtonian fluids, particularly under complex flow conditions such as equibiaxial elongation, remains a significant challenge in experimental rheology. This work presents the development of a novel method, Continuous Lubricated Squeezing Flow (CLSF), designed to quantify the normal yield stress of viscoelastic materials while minimizing boundary artifacts.

The CLSF method was implemented and validated using Carbopol 940, a model yield-stress gel, at concentrations of 1 wt% and 2 wt%. Comparative shear rheology was first performed to establish baseline yield stresses and verify sample integrity. CLSF experiments were then conducted over controlled flow rate increments and gap distances …

A Study Of Perceptions, Readiness, Benefits, And Barriers Related To Exoskeleton Adoption In New Jersey’S Warehousing Sector, Terry Asante

Theses

The warehousing industry in New Jersey remains a vital component of the region's logistics network, employing more than 200,000 workers who routinely engage in lifting, bending, overhead reaching, and other physically demanding activities. These exposures contribute to musculoskeletal disorder (MSD) rates that exceed national averages, particularly affecting the low back and shoulders. Nationally, MSDs account for an estimated $420 billion in combined direct and indirect costs each year, underscoring the need for interventions that can effectively reduce biomechanical strain. Industrial exoskeletons have emerged as a potential solution, with prior research demonstrating reductions in muscle activation, perceived exertion, and fatigue during …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …

Thermal Performance Evaluation Of Solar Cooling Systems For Educational Facilities In Baghdad, Yasser Alawi Mohammed Attia Al-Jubouri

Al-Esraa University College Journal for Engineering Sciences

Schools in Baghdad also suffer from poor thermal comfort, which is a common problem in high-temperature and low-humidity arid climates such as that of the city, where using cooling devices leads to a large energy demand and overloads on the national power grid. Such study offers a thorough assessment of the thermal performance of solar-based cooling systems in an efficient manner to be suitable for educational buildings in Baghdad. The analysis is centred on a solar thermal cooling system with absorption as the heat interaction medium, and an experimental characterisation and mathematical simulation itself are performed. A pilot installation, consisting …

An Entrepreneurial Approach To International Engineering Programs, Mark W. Rectanus

Journal of International Engineering Education

No abstract provided.

Efficient Task Allocation Technique For Robots In Smart Warehouse Using Center Of Items (Coi) Methodology, ‪Ahmed Yahya‬‏, Mohamed S. Saraya, Ahmed I. Saleh

Mansoura Engineering Journal

Nowadays, online shopping is very important in Daily life. in 2020 During the quarantine during the spread of COVID-19, online orders increased dramatically, as a result of the great progress in fifth-generation technologies and using the Internet of Things (IoT) and industrial Internet of Things (IIoT), industry 4.0 and 5.0, fog computing, cloud computing, robots systems, and drones systems. Smart warehouses picking system becomes a Basic need and can be implemented to improve efficiency in logistics. Smart warehouses are growing more dependent on robot systems to make the process of meeting these requests more flexible and effective. Therefore, the allocation …

Aerodynamics And Heat Transfer In Polymer Blown Film Processing: Experimental And Numerical Investigation, Mohammad Luqman Zulbakri, Nur Atiqah Mat. Rautin, Raa Khimi Shuib, Ku Marsilla Ku Ishak, Auratus Zuratul Ain Abdul Hamid, Mohamad Danial Shafiq, Mohamad Yusof Idroas, Muhammad Khalil Abdullah

Makara Journal of Technology

The effects of airflow dynamics, heat transfer, and mechanical properties on the HDPE blown film extrusion process were examined using a single-lip air ring with a fixed compressed-air valve opening angle of 10°. Reynolds numbers ranging from 9175 to 25911 were analyzed to understand their impact on cooling efficiency, bubble morphology, and film properties. Numerical simulations employing the Standard k−ω turbulence model in ANSYS FLUENT v2023, with mesh refinement achieving y+ ≈ 1, captured detailed flow and heat transfer behavior. Results showed that higher Reynolds numbers significantly enhanced the heat transfer coefficient, with values increasing from 1096 W/m²·K at Reynold …

Prediction Of Maximum Local Scour Depth Due To Horizontal Jets Of Flushing Gate Using Artificial Neural Network, Adhy Kurniawan, Muhammad Sulaiman, Agus Maryono, Bambang Agus Kironoto, Amalia Ula Hazhiyah

Makara Journal of Technology

Local scour is a serious concern for hydraulic engineers. To maintain the reservoir capacity, flushing accumulated sediment is necessary, resulting in a turbulent and scouring jet from the flushing gate. Predicting the maximum scour depth from these water jets is crucial for civil engineers. Despite many proposed equations, one have shown consistent applicability due to the complex nature of the process. Ensuring accurate prediction between hydraulic parameters and the geometry of the scour hole in prototype experiments remains a key issue. To address this issue, this paper examines the use of artificial neural network (ANN) analysis as a computing device …

Dual-Interface Wifi Packet Sniffer System Using Esp32-Cam With Real-Time Pcap Generation For Iot Network Analysis, Boy Setiawan Boy, Maghfiroh Maulani, Zico Pratama Putra, Muhammad Senoyodha Brennaf

Makara Journal of Technology

This study focuses on designing and implementing a cost-effective and energy-efficient WiFi packet sniffer system using the ESP32. The ESP32-CAM module, which combines WiFi, Bluetooth, and microSD support, is used to capture IEEE 802.11 frames in real-time via promiscuous mode. Packets are stored in packet capture format, which is compatible with tools such as Wireshark and Scapy. Developed using the official ESP-IDF, it offers low-level control and high performance. Two user interfaces were implemented: a UART-based text menu and a web-based HTTPS menu hosted on the ESP32 itself. Functional and performance evaluations were conducted with a focus on capturing broadcast …

Digital Twinning To Advance Effluent Water Treatment For Pulp And Paper Mills: A Data-Driven Approach For Process Optimization, Fatima Iqbal, Fatemeh Naeijian, Christopher Page, George Fu, Francisco Cubas-Suazo, Stetson Rowles

Civil Engineering & Construction: Faculty Publications

The pulp and paper industry is the third largest freshwater consumer and faces pressure to minimize water usage and environmental impact. Aerated stabilization basins (ASBs) play a crucial role in treating their wastewater, yet existing open-source models often fail to accurately predict treatment efficiency across varying conditions. This study addresses this gap by advancing ASB modeling for ultimate oxygen demand prediction. Specifically, we improved accuracy with variable temperature corrections and incorporating uncertainty to capture the variability in outputs. The models demonstrated strong predictive performance for ultimate oxygen demand (mainly carbonaceous and nitrogenous biochemical oxygen demand) with R2 values ranging from …

Bio-Papcz: Corn Starch-Based Composite Bioplastic Reinforced With Pineapple Leaf Fiber (Palf), Zinc Oxide (Zno), And Polyvinyl Alcohol (Pva), Marvin C. Caya, Shervin Austin C. Huang, Jovar Khalel J. Maghari, Ruel M. Levida

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Plastic pollution poses a serious global threat, as petroleum-based plastics persist for centuries, and their surging production of over 450 million tons overwhelms ecosystems (Ritchie et al., 2023). Using a quantitative experimental research design, the study examined the effects of varying concentrations of cornstarch-based bioplastic reinforced with pineapple leaf fiber (PALF), polyvinyl alcohol (PVA), and zinc oxide (ZnO) on the bioplastic’s tensile strength and soil degradability. Sample C2 (ZnO 3.0 %w/w; PVA 9.0 %w/w) demonstrated the optimal tensile properties with a tensile strength of 0.76 MPa and an elongation at break of 6.40%, which was attributed to the addition of …

Effects Of Foam Type And Thickness On Impact Resistance, Thermal Insulation, And Cost-Effectiveness Of Medical Containers For Drone Delivery, Josh Henry C. Soriano, Eriel V. Fonte, Lambertsus S. Novera, Nicolai Paolo B. Villarin, Joel B. Jalon, Jr.

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Accessible healthcare remains a challenge for rural communities lacking reliable infrastructure for medical supply delivery. Delivery drones have recently emerged as a viable alternative, dropping medical containers during flight. However, the effectiveness of different foam types and thicknesses combined with corrugated cardboard as shock-absorbing materials in a medical container for delivery drones has yet to be tested. Thus, this study designed cost-effective containers using corrugated cardboard and multiple foam types and thicknesses, aiming to preserve the integrity of the contents, withstand impact, and control temperatures. Four foam types—polystyrene, polyurethane, polyethylene, and expanded polystyrene (EPS) —were tested at 1 cm, 2 …

Uji Kelayakan Teknis Dan Performa Auvest: Rompi Pendingin Otomatis Berbasis Wearable Thermoelectric Cooler Untuk Mitigasi Risiko Heat Stress, Muchammad Adam Wildan, Amelia Avril Rayhana, Nadia Hanifan Nabila, Bian Shabri Putri Irwanto

National Journal of Occupational Health and Safety

Heat stress is a serious threat to construction workers that can reduce productivity and even threaten lives. Existing cooling vest innovations still have limitations, such as weight, manual systems, and the risk of leakage. This study aims to analyze the effectiveness of the Automatic Vest (AUVEST), an automatic cooling vest based on Wearable Thermoelectric Cooler and the Internet of Things (IoT), in preventing the risk of heat stress. The method used is experimental with trials on one construction worker in indoor and outdoor environments. AUVEST is equipped with temperature sensors (DS18B20, TMP102) and humidity (DHT11), whose data is processed by …

Utilization Of Biochar From Date Palm For Wastewater Treatment Technologies: Mini-Review, Atheel Alwash, Emad Yousif, Salam Mohammed

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Recently, recycling agricultural waste has gained great importance in the field of the biochar industry, as it is a sustainable and inexpensive material that can be used to get rid of environmentally polluting materials. Dates are one of the major agricultural wastes in Iraq and the Gulf countries, which include fronds, seeds, and trunks. The challenge of obtaining a green and clean environment is represented by the safe disposal of these residues. These wastes are promising materials for producing biochar products as efficient adsorbents with improved characteristic properties. The present article revises the synthesis of biochar derived from date palm …

The Converging Frontiers: 3d Printing Of Polyvinyl Chloride (Pvc) For Environmental Remediation, Hazim F. Abbas, Salam Mohammed, Amamer M. Redwan

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

The global demand for effective environmental cleanup drives the need for innovative materials and techniques. 3D printing, which can produce complex and customized structures, offers promising solutions. PVC, a common, affordable, and durable polymer resistant to chemicals, is increasingly used for environmental applications. This report reviews recent advances in 3D-printed PVC for water purification, air filtration, and waste management. PVC’s strong properties, combined with the flexibility of 3D printing, enable the development of tailored, efficient components such as membranes, adsorbents, and catalytic supports. Technology also encourages a circular economy by recycling PVC waste into new feedstocks and on-demand, eco-friendly infrastructure. …

Smart Universities And Digital Transformation Based On Artificial Intelligence: A Case Of Al-Mustaqbal University, Ahmed Rasol Hasson

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Artificial Intelligence (A.I) is a key facilitator of universities procedures. Although the performance of AI has stretch out superior levels in developed countries, it is remain in its insufficiency in a lot of the developing nations. In this state, there is an imperative need to determine the important of adopting AI everywhere on Iraqi universities, due to the continuous utilize of a management old-fashioned systems. This research sight to explore applications that may influence the acceptance and adoption of AI in the Iraqi universities. This is achieved based on a qualitative approach of thematic analysis. The AI applications that were …

Experimental Study On Thermal Management Of Conventional Photovoltaic Module Using Hybrid Cooling System, Olufisayo Stephen Babalola, Olatunji Waliu Olademeji, Joseph Bukola Samson

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Photovoltaic (PV) cell junctions are thermally stressed, occasioned by heightened temperature beyond cell operating temperature threshold. This leads to efficiency diminution, which when properly addressed will change the fortune of PV electricity generation; which is more desired for reasons of clean energy and ubiquity of solar flux. Two 80W monocrystalline PV modules were installed at a tilt angle of 17°, south facing, on a stationary rack on top of Obafemi Awolowo University Physics Building. One module’s back surface had a hybrid cooling and the other as control. The PV modules cell temperatures, the ambient temperature, the solar irradiance and the …

Curing Duration Optimization To Reduce Shrinkage Cracking In One-Part Alkali-Activated Slag Concrete, A. Sadrmomtazi, H. Zanganeh

Journal of Sustainable Construction Materials and Technologies

The consequences of inadequate curing on one-part alkali-activated slag concrete (O-AAS) performance relative to ordinary Portland cement concrete (OPCC) have been investigated in this research. Prior to exposure to unsaturated conditions, samples underwent initial moist curing for durations ranging from 24 hours to one year. The testing program included compressive strength evaluation, chloride ion transport analysis, and measurement of free and restrained shrinkage. In addition, cylindrical cores were extracted from concrete columns to assess internal strength and chloride penetration resistance. Under unsaturated exposure, O-AAS exhibited a strength-aging phenomenon, with up to a 37% decrease in compressive strength over 360 days, …

Laboratory Investigation And Numerical Modelling Effect Of Carbon Nanotubes On Hot Mix Asphalt Permanent Displacement, Sepehr Saedi, Auwal Usman Nadada

Journal of Sustainable Construction Materials and Technologies

One of the primary causes of asphalt pavement deterioration is rutting; in contrast, one of the most effective methods to address this type of damage is the use of additives and quality evaluation during the design stages. In this research, laboratory testing and modeling using Abaqus software were employed to validate the laboratory results and predict and assess the potential for rutting. Carbon nanotubes (CNTs) were selected as an additive due to their exceptional mechanical properties and molecular interactions with bitumen. These nanotubes were used to modify the bitumen for the preparation of laboratory samples. The laboratory results from the …

Influence Of Early Microwave Curing On Performance Of Slag-Based Geopolymer Mortars, Ahmet Taşdemı̇R, Abdulkadir Çevı̇K

Journal of Sustainable Construction Materials and Technologies

In this article, an experimental study was conducted to examine the effect of curing time and microwave power on the compressive strength of early microwave-cured slag based geopolymers. Geopolymers have the potential to serve as an environmentally friendly substitute for cement-based building materials, and the use of microwave curing to geopolymers holds the promise of substantial strength improvement. Different microwave curing energies (300 - 800 Watts) were utilized at varying durations (10 - 60 minutes) on demoulded mortar specimens after one day. After that, compressive strength tests were conducted on both the cured and uncured specimens at three different ages: …

Effect Of Niobium Addition On Corrosion Behavior, Mechanical Properties, And Microstructures Of U6zr Alloys In An Aerated Environment, Masrukan Masrukan, Djati Handoko, Dede Djuhana, Rohmad Sigit, M. Husna Al Hasa, Wisnu Ari Adi, Siti Mardiah

Makara Journal of Science

The effect of Nb addition on the corrosion behavior of U–6Zr alloys within an aerated, demineralized water (DW) environment (pH 5.61) and its correlation of this addition with the mechanical and microstructural properties of the alloys were investigated. The U–6Zr–xNb alloys (x = 1, 4, and 7 wt.%) were synthesized by arc-melting U, Zr, and Nb. Additionally, the samples were mounted and polished, after which they were subjected to electrochemical corrosion analysis using a potentiostat. This evaluation was conducted in a DW medium (pH 5.6), representing an aerated atmosphere, at room temperature (27°C) and a potentiodynamic scan rate of 1 …

Detection And Correction Of Object Orientation On Production Lines Using Photodetector-Based Systems, Utkirjon Ubaydullayev, Elmira Raxmanova

Technical science and innovation

This article addresses the issue of errors occurring in high-speed production lines, particularly those caused by misalignment or incorrect positioning of manufactured objects. Although production lines have significantly enhanced industrial efficiency worldwide, they are not immune to mistakes, especially under rapid operation conditions. To mitigate these errors without human intervention, the proposed solution integrates photodetector sensor matrices with robotic manipulators. The system uses high-resolution photodetector arrays, such as the Hamamatsu S13774 CMOS Linear Image Sensor, to capture shadows of objects on the production line, converting these into numerical data. This data is then processed using Principal Component Analysis (PCA) and …

Treatment Of Textile Industry Wastewater By The Adsorption–Coagulation Method, Adkhamjon Rustamovich Makhkamov, Elmurod Abdukodirovich Egamberdiev, Muhammadzohid Abidjanovich Safaev

Technical science and innovation

This scientific article provides a systematic analysis of the composition of colored wastewater generated in cotton, wool, and silk textile enterprises, the sources of pollution, and modern physicochemical treatment methods. Wastewater formed during bleaching, dyeing, and wet processing is characterized by high concentrations of dyes, surfactants, organic and inorganic compounds, as well as colloidal particles. The main objective of the study is to determine the possibilities for effective treatment of colored wastewater using adsorbents obtained from local industrial wastes and to develop optimal technological regimes. In the course of the research, highly dispersed fly ash obtained from the Angren Thermal …

Synthesis Of Schiff Base Based On Aminopolysaccharides A Chitosan Apis Mellifera With Salicylic And Glutaraldehydes, Alisher Mengliev

Technical science and innovation

Chitosan is a linear aminopolysaccharide. Using methods of chemical modification of chitosan, a number of new biologically active materials have been created. The main interest in these products is due to the preservation of the basic physicochemical and biological properties of the original polymer and the acquisition of new properties depending on the nature of the introduced groups. Modified chitosan can be used in various fields such as drug delivery, textiles, wastewater treatment and a number of biomedical applications. The purpose of this work is to extract chitosan from the remains of ApisMellifera bees and synthesize a Schiff base with …

Development Of Technical Solutions To Prevent The Formation Of Sludge Regime At The Bottom Of A Well, Rustam Umarkhanovich Juraev, Jonibek Tursunov

Technical science and innovation

The trouble-free process of drilling wells largely depends on the effective cleaning of the borehole. The formation of a slurry regime at the bottom of the well leads to the process of repeated crushing of drilling fines, which in turn leads to a decrease in the mechanical drilling speed, to an increase in the energy consumption of the rock-crushing tool for repeated crushing, and also increases the risk of oil seals. In addition, the formation of a slurry regime at the bottom of the well increases the intensity of abrasive wear of the drilling rig. This article provides a theoretical …

Optimization Of Welding Parameters For Carbon Steel Fabrication: A Trade-Off Between Tensile Strength And Heat-Affected Zone, Melkiory B. Njawala, Simon I. Marandu, Enock W. Nshama

Tanzania Journal of Engineering and Technology (TJET)

This study focused on optimizing gas metal arc welding (GMAW) parameters for AISI 1045 carbon steel to balance the ultimate tensile strength (UTS) and heat affected zone (HAZ) size of the weldment. Using a full factorial design of experiments (27 trials), the influence of welding current, arc voltage, and travel speed on UTS and HAZ size of AISI 1045 carbon steel weldments were investigated. From the analysis of results, using Analysis of variance (ANOVA) technique, the results revealed that current, travel speed and arc voltage contributed 74.41%, 19.05% and 0.04%, respectively, to the total percentage of variations on UTS data. …

Combined Optimisation Of Machining Parameters, Tool Wear, Dimensional Errors And Quality Deviations In Multi-Pass Turning Operations, Mussa I. Mgwatu

Tanzania Journal of Engineering and Technology (TJET)

Measurements of on-line tool wear and part dimensional accuracy in machining operations are not readily available in machining shop floor because they involve higher investment such that the decisions of tool wear and part quality for intermediate cutting passes cannot be justified. This paper demonstrates how the optimisation of machining parameters can be made together with tool wear and part quality for turning operations. Two optimisation models were developed for maximum material removal rate and minimum production cost. A theoretical framework was initially presented before the two models were formulated. Input data for the models were adopted from previous studies …