Engineering Commons^™

Balancing Trade-Offs In One-Stage Production With Processing Time Uncertainty, Jingjing You

Theses and Dissertations--Mechanical and Aerospace Engineering

Stochastic production scheduling faces three challenges, first the inconsistencies among key performance indicators (KPIs), second the trade-offs between the expected return and the risk for a portfolio of KPIs, and third the uncertainty in processing times. Based on two inconsistent KPIs of total completion time (TCT) and variance of completion times (VCT), we propose our trade-off balancing (ToB) heuristic for one-stage production scheduling. Through comprehensive case studies, we show that our ToB heuristic with preference =0.0:0.1:1.0 efficiently and effectively addresses the three challenges. Moreover, our trade-off balancing scheme can be generalized to balance a number of …

Tailoring Texture, Microstructure, And Shape Memory Behavior Of Niti Alloys Fabricated By L-Pbf-Am, Sayed Ehsan Saghaian N.E.

Theses and Dissertations--Mechanical and Aerospace Engineering

Laser Powder Bed Fusion (L-PBF) is one of the most promising Additive Manufacturing (AM) methods to fabricate near net-shape metallic materials for a wide range of applications such as patient-specific medical devices, functionally graded materials, and complex structures. NiTi shape memory alloys (SMAs) are of great interest due to a combination of unique features, such as superelasticity, shape memory effect, high ductility, work output, corrosion resistance, and biocompatibility that could be employed in many applications in automotive, aerospace, and biomedical industries. Due to the difficulties with traditional machining and forming of NiTi components, the ability to fabricate complex parts, tailor …

A Theoretical Study On Integration And Optimization Of Gas Turbine Problems With Solar Energy System, Ahmad M. Abubaker

Theses and Dissertations--Mechanical and Aerospace Engineering

Gas Turbine (GT) power plants suffer from sensitivity to ambient-air temperatures, high fuel consumption, and a high amount of waste heat dumped into the ambient. Various solutions were proposed to solve these drawbacks, which could simultaneously solve at most two problems, usually at the expense of the third. For instance, inlet-air cooling can reduce ambient-air temperatures but will result in increased fuel consumption. However, in this work, a novel cascaded system was integrated into a combined cycle, capable of simultaneously solving all the aforementioned GT drawbacks. Parabolic trough collectors were used to preheat the air at the combustion chamber inlet …

The Role Of Live Conifer Fuels In Crown Fires Spread, Adnan Darwish Ahmad

Theses and Dissertations--Mechanical and Aerospace Engineering

Live foliage for some tree and shrub species can support flaming fire spread at much higher moisture content than dead fuel materials. However, the role of live fuels in forest fires has been controversial in the past decades. Although ignition and spread statistical data for live and dead fuels exist in the literature, a clear understanding of the fundamental difference in the burning behavior is missing. To illuminate the role of live fuel on forest fire spreading, a laboratory ignition experiment was designed to examine the burning behavior of live Norway spruce needles. A schlieren-Infrared combined measurement apparatus was developed …

Use Of Microscale Hydrophobic Surface Features For Integration Of 3d Cell Culture Into Multi-Functional Microfluidic Devices, Soroosh Torabi

Theses and Dissertations--Mechanical and Aerospace Engineering

3D cell culture and microfluidics both represent powerful tools for replicating critical components of the cell microenvironment; however, challenges involved in integration of the two and compatibility with standard tissue culture protocols still represent a steep barrier to widespread adoption. Here we demonstrate the use of engineered surface roughness in the form of microfluidic channels to integrate 3D cell-laden hydrogels and microfluidic fluid delivery. When a liquid hydrogel precursor solution is pipetted onto a surface containing open microfluidic channels, the solid/liquid/air interface becomes pinned at sharp edges such that the hydrogel forms the “fourth wall” of the channels upon solidification. …

Turbulence Suppression In An Axially Rotating Pipe, Alyn J. Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

The phenomenon of turbulence suppression in a rotating pipe flow system has been well documented by past research and experimentation. Despite this, the methods that drive this phenomenon have not yet been effectively characterized, especially at higher Reynolds numbers. While many experiments have been performed to better understand swirling turbulent pipe flow, a difficulty that arises is how to test for high levels of rotation without reducing the Reynolds number. This thesis documents the design and construction of a new pressurized pipe flow system at the University of Kentucky aimed at achieving high Reynolds numbers without causing a reduction in …

Multiscale Finite Element Modeling Of Active Contraction In Striated Muscle, Charles Kurtis Mann

Theses and Dissertations--Mechanical and Aerospace Engineering

Greater than one in three American adults have at least one type of cardiovascular disease, a major cause of morbidity. Computational cardiac mechanics has become an important part of the research effort to understand the heart’s response to mechanical stimuli and as an extension, disease progression and potential therapies. To this end, the present work aims to extend these efforts by implementing a cell level contractile model in which active stress generation in muscle tissue is driven by half-sarcomere mechanics. This is accomplished by enhancing the MyoSim model of actin and myosin in order to produce a multiscale model. This …

Evaluation Of Radiative Conductivity Inside A Porous Media With The Effect Of Participating Medium Based On Microscale Imaging, Mingping Zheng

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles will experience high loads of heat while entering the planetary atmosphere. At such high temperature, radiation becomes the dominant mode of heat transfer. Since the atmospheric entry environment is nearly impossible to duplicate in a laboratory environment, a numerical model to evaluate thermal performance of the thermal protection system was established. The model simulates the radiative heat transfer process in highly porous media, and the process also takes into account the influence of the participating media. An iterative approach and periodic boundary conditions are used to solve The unbalanced heat flux problem. CT scanned microscale Fiberform and artificial …

Viscoelasticity Of Ptfe-Based Face Seals, Bo Tan

Theses and Dissertations--Mechanical and Aerospace Engineering

PTFE-based materials are widely used in areas of tribology, particularly in seal and bearing applications because of their outstanding self-lubricating properties. Often in dynamic seal applications there is a need for ultra-low mechanical friction loss between the sealing surfaces. Due to its extremely low friction coefficient, there is interest in employing Polytetrafluoroethylene (PTFE) materials in such applications. One challenging aspect of employing PTFE is that these materials are viscoelastic and plastic. This dissertation concentrates on the modeling of viscoelastic material response when used as mechanical face seals with a focus on PTFE-based materials. First, the viscoelastic characteristics are measured through …

Attitude Control And Consensus On So(3) Using Sinusoids: Theory And Application To Small Satellites, Roshan Anandrao Chavan

Theses and Dissertations--Mechanical and Aerospace Engineering

We present and analyze kinematic-level and dynamic-level feedback control algorithms for single agent attitude control and multi-agent attitude consensus on SO(3). The kinematic-level algorithms yield attitude feedback controls that are piecewise-continuous sinusoidal angular velocities. The dynamic-level algorithms yield attitude feedback controls that are relative angles of rotational-mass actuators, which are continuous but only piecewise continuously differentiable sinusoids. Furthermore, the dynamic-level algorithms are designed to accommodate actuator stroke constraint. We present application of the dynamic-level control algorithms to attitude control and consensus of small-satellites.

Study Of Stress-Based Fiber Reorientation Law In A Finite Element Model Of Cardiac Tissue, Alexus Lori Rockward

Theses and Dissertations--Mechanical and Aerospace Engineering

Myofiber organization in the heart plays an important role in achieving and maintaining physiological cardiac function. In many cardiac disease states, myofibers and particularly cardiomyocytes are disorganized in chaotic patterns, a phenotype known broadly as myocardial disarray. In familial hypertrophic cardiomyopathy (HCM), this disorganization in the form of myocyte disarray is thought to contribute to impaired cardiac function and the development of arrhythmia during disease progression. However, the mechanisms regarding fiber reorientation in the heart are yet still unclear, and few adaptative laws have been created to explore these mechanisms. A stretch-based law was developed with the aim of achieving …

Waste Heat Recovery Of Industrial Regenerative Thermal Oxidizer (Rto), A Case Study, James Trimpe Jr.

Theses and Dissertations--Mechanical and Aerospace Engineering

Industrial processes that utilize and release hazardous compounds into the atmosphere are required to break down those compounds before exhausting them from their facilities. An industry-recognized method to break down those hazardous compounds is through thermal oxidation. Thermal oxidation is a process where the compounds are exposed to their auto-ignition temperature in an oxygen-rich environment and combust. The output of thermal oxidation is carbon dioxide, water vapor, and heat. Thermal oxidizers are equipment that performs the thermal oxidation process. The heat output from thermal oxidizers is wasted if directly exhausted into the atmosphere. Regenerative thermal oxidizers (RTOs) use the waste …

Redesigning Products To Optimize Sustainable Performance In Multi-Generational Closed-Loop Production For Advancing The Circular Economy, Buddhika Minendra Hapuwatte

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable manufacturing and the circular economy concepts promote efficient and effective resource use to minimize the adverse economic, environmental, and social impacts of alarmingly increasing consumption rates. Product design is the key to implement these transformations in manufacturing. However, the currently available sustainable and circular design methods are not comprehensive and inadequate—especially for multi-generational products. Therefore, designing sustainable products optimized for circular and closed-loop production systems is a challenging task. The 6Rs concept introduced ‘Redesign’ to modify a product’s engineering specifications and allow sustainable utilization of the end-of-use resources from previous generations, thus closing the production loop. Therefore, the objective …

Experimental Investigation Of Image Distortion In A Mach 6 Hypersonic Flow, Ricky W. Green Ii

Theses and Dissertations--Mechanical and Aerospace Engineering

The image distortion that is inherently present when imaging through a flow field at hypersonic speeds was investigated. The original problem involves observation of the outside world from the inside an aircraft moving at hypersonic speeds. For this work, a Mach 6 hypersonic wind tunnel at Wright Patterson Air Force Base (WPAFB) was used and optical patterns were imaged with and without flow field characteristics. Two test campaigns were scheduled to conduct experiments that would provide answers to the proposed problem of the effect on observable aberrations through flow fields.

During the first test campaign, October 2017, optical patterns were …

Modeling Thin Layers In Material Response Solvers, Christen Setters

Theses and Dissertations--Mechanical and Aerospace Engineering

Thermal Protection Systems (TPS) are a necessary component for atmospheric entry. Most TPS contain thin layers of various materials such as ceramic coatings, pore sealers and bonding agents. When modeling TPS, these thin layers are often neglected due to the difference in scale between the TPS (centimeters) and the thin layers (micrometers). In this study, a volume-averaging flux-conservation method is implemented in the governing equations of a finite volume material response code. The model proposes the addition of a volume and area fraction coefficient which utilizes a weighted-averaging between the amount of thin layer and heat shield material in a …

Cell And Biofilm Adhesion Strength Quantified By The Laser Spallation Technique Yields A Novel Biocompatibility Metric, The Adhesion Index, James Boyd

Theses and Dissertations--Mechanical and Aerospace Engineering

Implant associated infections are one of the leading causes of hospital acquired infections in the United States. Medical orthopedic implant devices are designed to improve adhesion of relevant cells within our body. In the case of orthopedic implants, osteoblast cells will adhere and allow for proper integration with the body’s bones. However, virulent bacteria will also adhere onto medical implants and proliferate into biofilms. Bacterial biofilms become extremely difficult to eradicate clinically as antibiotics are not as effective, resulting in severe infections or loss of implant. The aim of this research is to quantify the adhesion strength differential between relevant …

Effective Modulus Of Cracked Bodies: A Finite Element Analysis, Alan Thomas Varughese

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis considers how cracks in an elastic body can alter the body’s elastic properties. In the present study the elastic property of note is the elastic or young’s modulus. It is desired to investigate to what extent the number and orientation of cracks can cause a reduction in the elastic modulus. Because of the complex nature of the elastic fields resulting from multiple cracks interacting together in a finite geometry an analytical solution is not possible or considered. Rather the Finite Element Method is used to determine the elastic response to a body with many cracks. This provides a …

A Computational Fluid-Structure Interaction Method For Simulating Supersonic Parachute Inflation, Jonathan Boustani

Theses and Dissertations--Mechanical and Aerospace Engineering

Following the successful landing of the Curiosity rover on the Martian surface in 2012, NASA/JPL conducted the low-density supersonic decelerator (LDSD) missions to develop large diameter parachutes to land the increasingly heavier payloads being sent to the Martian surface. Unexpectedly, both of the tested parachutes failed far below their design loads. It became clear that there was an inability to model and predict loads that occur during supersonic parachute inflation. In this dissertation, a new computational method that was developed to provide NASA with the capability to simulate supersonic parachute inflation is presented and validated. The method considers the loose …

Structural Optimization Of Space Transit Vehicle Concept, Hercules, James Philip Rogers

Theses and Dissertations--Mechanical and Aerospace Engineering

STRUCTURAL OPTIMIZATION OF SPACE TRANSIT VEHICLE CONCEPT, HERCULES:

A COMPARATIVE STUDY OF STRUCTURAL OPTIONS

Hercules is a vehicle concept developed by NASA Langley's Vehicle Analysis Branch to satisfy the need for sustainable transit between Earth, the moon, and Mars. Hercules features unprecedented abort capabilities and mission flexibility to aid in NASA's Mars campaign. By utilizing modern software to perform structural analysis and optimization for a large selection of stiffened panel concepts, beam concepts, and materials trends in the structural optimization emerge. These trends will be invaluable for the design of future spacecraft needed to fulfill similar roles.

The structural optimization …

Electromagnetic Formation Control Using Frequency Multiplexing, Zahra Abbasi

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation addresses control of relative positions and orientations of formation flying satellites using magnetic interactions. Electromagnetic formation flight (EMFF) is implemented, in which each satellite is equipped with a set of electromagnetic coils to generate an electromagnetic field. Traditional EMFF technique applies DC magnetic fields which lead to a nonlinear and highly coupled formation dynamics that allow for only position or orientation control of the satellites. We present a new frequency multiplexing method, which is a technique that uses multi-frequency sinusoidal controls, to approximately decouple the formation dynamics and to provide enough controls for both position and orientation control. …

Additive Manufacturing In Personalized Medicine: Patient-Customized Solid Dose Medicines, And Patient-Customized Wound Care Device, Amir Najarzadeh

Theses and Dissertations--Mechanical and Aerospace Engineering

Personalized Medicine - from a one-size fits all to a tailored approach is the future in pharmaceutical therapeutics and medical applications. The aim of this study is demonstrate additive manufacturing in two personalized medicine applications: 1. Patient- customized solid dose medicines, and 2. Patient-customized wound care device. The aim of the first application is to develop an inexpensive and accurate method to design and fabricate patient-customized tablets. Particularly this paper focuses on fabricating and dose controlling of patient-customized extended release prednisolone-poly(vinyle alcohole) PVA. Dry-Blending, Wet Granulation, Extrusion, Spherionization, Hot melt extrusion (HME) was adopted to produce drug loaded prednisolone-PVA filaments …

Quantifying The Source And Pathway Of Dissolved Reactive Phosphate In Karst Drainage Of The Inner-Bluegrass, Cory Radcliff

Theses and Dissertations--Biosystems and Agricultural Engineering

In the Midwestern U.S. seasonal hypoxia experienced in the Gulf of Mexico and harmful algal blooms in inland freshwater ponds, lakes, and rivers are partly fueled by dissolved orthophosphate loadings from disturbed landscapes. Efforts to reduce dissolved reactive phosphate (DRP) loadings have had varying levels of success and have led to insufficient water quality improvements. Inefficiencies in conservation strategies can stem from poor understanding of phosphate source and flow pathway dynamics. This study focused on monitoring sources and flow pathways of dissolved reactive P in a karst agroecosystem with phosphatic limestone. We collected event water samples at the Camden Creek …

Extraction Of Micro- And Nano-Plastic Particles From Water Using Hydrophobic Natural Deep Eutectic Solvents, Jameson R. Hunter

Theses and Dissertations--Biosystems and Agricultural Engineering

The production of plastic and the amount of waste plastic that enters the environment increases every year. Synthetic polymers will gradually break down into particles on the micro- and nano-scale. The micro- and nano-plastics pose a significant ecological harm by transporting toxic chemicals and causing inflammation and cellular damage when ingested. Two common plastics are polyethylene terephthalate (PET) and Polystyrene (PS), and a newer bioplastic polylactic acid (PLA) that has become a popular alternative. Deep eutectic solvents are a recently discovered solvent composed of a hydrogen bond donor and hydrogen bond acceptor and have been proposed as a cheaper alternative …

Assessing The Use Of Lidar And Uav Technology For Monitoring Growing Alfalfa, Stuart Tucker Sheffield

Theses and Dissertations--Biosystems and Agricultural Engineering

Alfalfa is a popularly grown crop because of its value as a nutritious feed source for livestock. The efficient production of an alfalfa crop relies on the monitoring of certain parameters, like height, quality, and yield. Traditionally, producers have used manual measurements of alfalfa plant height to estimate the nutritive quality and yield of a growing alfalfa crop. Manual measurements of plant height are often labor intensive and provide low resolution data that is not acceptable for full field scale assessment of growing alfalfa. The two studies presented in this thesis offer detailed insight into the rapid and accurate monitoring …

Characterization And Upgrade Of Endocarp Biomass Derived Lignin To Value Added Products, Makua Vin-Nnajiofor

Theses and Dissertations--Biosystems and Agricultural Engineering

Lignin is an abundant biopolymer and a promising source of feedstock for high-value chemicals and energy materials, however, application methods of lignin into valuable products is yet to be fully explored. This study explores the valorization of lignin derived from lignin-rich endocarp biomass through the development of lignin-derived electrode materials. The chemical composition and cellular structure of the endocarps were characterized using HPLC and scanning electron microscopy (SEM) imaging. Mechanical properties of walnut and peach endocarps and preprocessing requirements were investigated using nanoindentation and specific energy consumption during grinding. Next, lignin was extracted from endocarps using deep eutectic solvent and …

Modeling Energy Flows In Floating In-Pond Raceways Utilizing Solar Power Back-Up, Bo Smith

Theses and Dissertations--Biosystems and Agricultural Engineering

The In-pond Raceway (IPR) is a novel option for production aquaculture, depending on water moving devices to provide constant flow. Device failure may result in catastrophic fish loss, requiring power backup systems to mitigate risk in case of power outages. Because these systems must be dependable and many suitable locations are remote, off-grid solar photovoltaic (PV) systems with battery storage have been considered since they eliminate need for utility power. Such systems can be hard to size and expensive. This study modeled system requirements using an energy balance to determine whether systems could withstand varying loads based on climatological conditions. …

Evaluating The Biotic Condition Of Restored Streams In Kentucky’S Inner Bluegrass Region, Charles Cole Crankshaw

Theses and Dissertations--Biosystems and Agricultural Engineering

Numerous stream restoration projects have been implemented in Kentucky’s Inner Bluegrass region to offset anthropogenic impacts. These projects range from full channel realignments to volunteer-led riparian installations. To assess the ability of said projects to restore stream habitat and biota, full restoration (n=12) and riparian (n=6) sites were compared to reference (n=6) and disturbed (n=12) sites using RBP and SVAP protocols, macroinvertebrate samples, and geomorphology. General trends for SVAP, RBP, and BI scores, starting with highest habitat or biotic quality, were reference sites, full and riparian restoration sites, then disturbed sites. The number of EPT taxa, another indicator of biological …

Comparing Beopt (Energyplus) Energy Predictions To Measured Circuit Level Energy Consumption Of 12 Similar Small Energy-Efficient Single-Family Residences, Braydi Mcpherson-Hathaway

Theses and Dissertations--Biosystems and Agricultural Engineering

Residential energy usage patterns change as a result of new building codes, renewable technologies, household electronics, and changes in occupancy habits. Building simulations have used end-use energy studies to inform occupancy profiles and overall usage characteristics for the building simulations. Building simulations allow designers, engineers, policymakers, code developers, and building owners to model proposed designs to new and existing buildings, thus it is imperative that the energy profiles used in the models are accurate. In this study, the building simulation engine BEopt is used to model energy-efficient homes recently constructed in Southern Kentucky. The homes have well defined building characteristics …

Ecg Arrhythmia Classification Using Discrete Wavelet Transformation, Hannah E. Chookaszian, Nathan D. Diekema

Electrical Engineering

Cardiovascular diseases (CVDs) are the highest leading cause of death worldwide with an approximate 17.9 million related deaths every year according to the World Health Organization (WHO). Electrocardiographic (EKG or ECG) signals are electrical signals measured in the heart and are the main indicator for pre-existing cardiac conditions. The application of deep learning methods such as artificial neural networks (ANN) will assist in the automated detection and classification of ECG signals. The current methods for ECG analysis are lacking in accuracy and reliability considering the level of risk involved with CVDs and the importance of a correct diagnosis. Clinicians use …

Software And Data Visualization Platform For Groundwater Level And Quality Monitoring System, Carlos M. Oppus, Ma. Aileen Leah G. Guzman, Maria Leonora C. Guico, Jose Claro N. Monje, Mark Glenn F. Retirado, John Chris T. Kwong, Genevieve C. Ngo, Annael J. Domingo

Electronics, Computer, and Communications Engineering Faculty Publications

Rapid urbanization and increasing population come with the increased extraction and use of groundwater resources. To track the effect of these activities on groundwater level and quantity; a system for real-time monitoring is devised. In this paper; we present a software system design that enables a locally-developed groundwater level and water quality monitoring hardware setup to gather water quality parameter data; send it to a cloud server; and present organized data for better visualization. The hardware setup consists of an Arduino microcontroller. Upon deployment; the hardware setup is linked to an Android application that connects to the web-based platform.