Engineering Commons^™

Exploring Quality Management Strategies To Mitigate Culture Shock Among Cochlear Implant Users, Victor Mulume' Ambila

Walden Dissertations and Doctoral Studies

AbstractAfter the cochlear implant (CI) activation period and therapy, adult CI users who travel overseas encounter culture shock factors that paralyze their coping capability, which need normalization through management strategies during the post-cochlear-implantation process (PCIP). In the structure of the conceptual framework, a plan is presented for addressing the management strategy. An integrated system of product-process-service-care portrays the product as an active implant within an individual bearer fostering a CI user’s physical, physiological, and psychological traits. The problematic aspects alter the end users’ coping capability in an unfamiliar host environment abroad. The qualitative research approach used was a single case …

Enzyme-Initiated Admicellar Polymerization, Elaheh Shakeri

Electronic Theses and Dissertations

Admicellar polymerization was developed in the 1980s as an economical method for modifying various surfaces. In admicellar polymerization, a low monomer to initiator (M/I) ratio was traditionally required to overcome this limitation and achieve high polymer conversion when oxygen was present in the headspace and dissolved in the reaction medium. To develop an environmentally friendly, cost-efficient, and feasible deoxygenation and initiation technique, we studied the use of glucose oxidase (GOx) in admicellar polymerization. In this method, GOx acts as the catalyst in the oxidation of ?-D-glucose, while consuming oxygen and generating hydrogen peroxide and D-glucono-?-lactone. There are many advantages of …

Convective Heat Transfer Enhancement Of A Channel-Flow Using Horizontally-Oriented Piezoelectric Fans, Janak Tiwari

Electronic Theses and Dissertations

Experimental and numerical studies were carried out to investigate the convection heat transfer enhancement of air channel flow using a piezoelectric fan, operated at 90.3 Hz. Its peak-to-peak displacement was increased up to 11.8 mm. The average velocity of channel flow was ranged up to 3 m/s, covering both laminar and turbulent flow regimes. The effects of fan location on the heat transfer performance were evaluated by changing the relative position of the fan tip to the heated surface. A maximum heat transfer enhancement of 102 % was obtained at the channel flow rate of 15 LPM. The fan was …

Evaluation Of Manufacturing Methods For Antenna Design, Caleb Daniel Keathley

Electronic Theses and Dissertations

This paper proposes several antennas designed to satisfy both dimension and frequency constraints of a handset. The proposed antennas are modeled and simulated in CST software. After multiple iterations, the final antenna designs are manufactured using both a milling machine and a 3D printer. The fabricated antennas are measured using a network analyzer and compared to their expected simulation results.

Supporting Shrinkage: Planning And Decision Making For Legacy Cities, Michael P. Johnson Jr., Justin Hollander, Eliza Whiteman Kinsey, George Chichirau, Charla Burnett

Public Policy and Public Affairs Faculty Publication Series

Supporting Shrinkage describes a new approach to citizen-engaged, community-focused planning methods and technologies for cities and regions facing decline, disinvestment, shrinkage, and social and physical distress. The volume evaluates the benefits and costs of a wide range of analytic approaches for designing policy and planning interventions for shrinking cities and distressed communities. These include collaborative planning, social media, civic technology, game design, analytics, decision modeling and decision support, and spatial analysis. The authors present case studies of three US cities addressing shrinkage and decline, with a focus on issues of social justice, democratization of knowledge, and local empowerment. Proposed as …

Peculiarities Of Neurostimulation By Intense Nanosecond Pulsed Electric Fields: How To Avoid Firing In Peripheral Nerve Fibers, Vitalii Kim, Emily Gudvangen, Oleg Kondratiev, Luis Redondo, Shu Xiao, Andrei G. Pakhomov

Bioelectrics Publications

Intense pulsed electric fields (PEF) are a novel modality for the efficient and targeted ablation of tumors by electroporation. The major adverse side effects of PEF therapies are strong involuntary muscle contractions and pain. Nanosecond-range PEF (nsPEF) are less efficient at neurostimulation and can be employed to minimize such side effects. We quantified the impact of the electrode configuration, PEF strength (up to 20 kV/cm), repetition rate (up to 3 MHz), bi- and triphasic pulse shapes, and pulse duration (down to 10 ns) on eliciting compound action potentials (CAPs) in nerve fibers. The excitation thresholds for single unipolar but not …

Gq-Mediated Ca** Signals In Human Airway Smooth Muscle Cells, Hanna Viktoria Bobinger

Honors Theses

Current asthma therapies include corticosteroids, long acting β2-adrenergic receptor (β2-AR) agonists paired with corticosteroids, or short-acting β2-AR agonists used in rescue inhalers. Chronic use of β-agonists results in diminished effectiveness, and use of long-acting β-agonists can even exacerbate asthma symptoms; this is partly because anti-inflammatory therapy does not directly address the exaggerated airway narrowing due to excessive shortening of airway smooth muscle (ASM), which is the hallmark of asthma. These observations led our collaborators to investigate other potential asthma therapies – bitter taste agonists. 2 Bitter taste agonists, such as chloroquine, activate a subset of Gq-coupled receptors known as bitter …

Metal Discovery By Highly Sensitive Microwave Multi-Band Metamaterial-Inspired Sensors, Ghaleb Al-Duhni, Nantakan Wongkasem

Electrical and Computer Engineering Faculty Publications

A simple, compact, contactless, and high sensitivity metamaterial-inspired sensor has been developed to detect and classify precious transition metals in the S- and C-band regime, using reflection coefficients. A multi-band metamaterial, quadruple concentric circular split ring resonator, is specifically designed as a sensing enhancer, where the additional bands can effectively trigger the electromagnetic properties, as well as enhance the differentiation between the testing metal samples. The proposed sensor was tested on precious transition metals, silver, platinum, and gold thin slabs of various thicknesses, from 0.5 µm to 3 mm. Five resonances were established in the frequency range of 2–8 GHz. …

Resonant Ultrasound Spectroscopy: Sensitivity Analysis For Anisotropic Materials With Hexagonal Symmetry, Christopher Lee Sevigney

Electronic Theses and Dissertations

Resonance ultrasound spectroscopy (RUS) is an experimental method by which material properties are obtained by careful observation of the resonant vibrations of a meticulously crafted sample. Among the most common applications of this technique is the determination of single-crystal elasticity. Previous works have considered the reliability of elasticity information obtained via the RUS method when the material is of isotropic or cubic symmetry, and this work extends these efforts to materials with hexagonal symmetry, such as titanium di-boride. The reliability of elasticity information obtained by RUS is evaluated by Sobol Analysis and by close examination of the stiffness-frequency functionality. Findings …

Injectable Gelatin-Silk Fibroin Composite Hydrogels For In Situ Cell Encapsulation, Ryann D. Boudreau

Honors Theses and Capstones

Hydrogels are widely used tools for tissue engineering and regenerative medicine. Characterized as biofunctional, water-based polymer matrices with tunable mechanical properties, hydrogels have promising but limited applications in biomedical engineering, due to poor and static matrix strength. Here we plan to rectify this issue by introducing a new hydrogel made from a composite of gelatin and silk fibroin crosslinked by microbial transglutaminase (mTG) instantly and beta sheet formation gradually, respectively. This interpenetrating network (IPN) shows enhanced mechanical stiffness and strength compared to gelatin hydrogels, and is capable of encapsulating human cells with high viability demonstrated by the encapsulation of human …

Theoretical Study Of Magnetic Particles In A Shear Flow Subjected To A Uniform Magnetic Field, Christopher A. Sobecki

Doctoral Dissertations

"Magnetic manipulation of non-spherical magnetic microparticles is important for applications in shape-based and magnetic-based separations such as waste management, disease diagnostics, drug delivery, and mining. Manipulations of magnetic microparticles also include chain formation to assemble compositions for electronics, drug loading designs, and magnetorheological fluids for smart armor, hydraulic brakes, and dampers. In microfluidic devices, separation-formation-effectiveness depends on the shape of the channel, the shear rate, and the magnetic field strength and direction.

Particle separation and chain formation involved highly complex and computational expense-demanding studies in microfluidic devices, magnetic fields, and particle- particle/wall interactions. This research took complex experimental studies and …

Fiber Optic Sensors For Industry And Military Applications, Yiyang Zhuang

Doctoral Dissertations

"Fiber optic sensors (FOSs) have been widely used for measuring various physical and chemical measurands owing to their unique advantages over traditional sensors such as small size, high resolution, distributed sensing capabilities, and immunity to electromagnetic interference. This dissertation focuses on the development of robust FOSs with ultrahigh sensitivity and their applications in industry and military areas.

Firstly, novel fiber-optic extrinsic Fabry-Perot interferometer (EFPI) inclinometers for one- and two-dimensional tilt measurements with 20 nrad resolution were demonstrated. Compared to in-line fiber optic inclinometers, an extrinsic sensing motif was used in our prototype inclinometer. The variations in tilt angle of the …

Agent-Based Model Of Broadband Adoption In Unserved And Underserved Areas, Ankit Agarwal

Masters Theses

"In the last two decades, demand for broadband internet has far outpaced its availability. The Federal Communications Commission’s (FCC) 2020 Broadband Deployment report suggests that at least 22 million Americans living in rural areas lack access to broadband internet. With the COVID-19 pandemic affecting normal life, there is an overwhelming need to enable unserved and underserved communities to adapt to the “new normal”. To address this challenge, federal and state agencies are funding internet service providers (ISPs) to deploy infrastructure in rural communities. However, policymakers and ISPs need open-source tools to predict take-rates of broadband service and formulate effective strategies …

Investigation Of Post-Acid Stimulation Impacts On Well Performance Using Fracture Modeling And Reservoir Simulation In A Jurassic Carbonate Reservoir, Muaath Alansari

Masters Theses

"Well stimulation (well fracturing) became an essential tool in the Oil and Gas industry to unlock the potential of unconventional reservoirs all over the world and especially in the Middle East. In Kuwait, well stimulation is obligatory when dealing with deep Jurassic carbonate reservoirs. Thus, the well fracture designing process plays a very critical role in determining the success of the stimulation job and the improvement of the recovery.

Several wells stimulated with 20% HCL have shown wide variations in both short and long term well production performance. The research aims to investigate and identify the possible reasons causing these …

Power Generation From Waste Heat During Oil Production, Subrahmanya Chandra Bhamidipati

Masters Theses

"The increase in the world population is causing a significant increase in the global demand for energy. This rise in demand is generally met with the use of fossil fuels. But there is considerable pressure to lessen the release of carbon through the combustion of fossil fuels. One way that the oil and gas industry can provide increased energy without carbon combustion is by extracting the latent heat energy contained in produced oil, gas and water from producing reservoirs, and from water which is cycled through depleted, end-of-life or abandoned reservoirs. Extracting this energy and using it to provide direct …

Mechanical Activation And Cation Site Disorder Of Spinel-Based Ceramics, Cole A. Corlett

Masters Theses

"This research focuses on the processing and the effects that has on the cation disorder of magnesium-aluminate spinel based (MgAl₂O₄) ceramics. The first goal of this project was to determine the effects of high-energy milling, i.e., mechanical activation, on cation disorder (inversion) within the spinel structure. First, 1:1 molar ratios of MgO:Al₂O₃ ceramics were processed using two green processing methods, ball milling (XD) and SPEX milling (mechanical activation, MA) followed by a subsequent annealing treatment in air to form a single spinel phase in each powder sample. Neutron diffraction analysis was employed to …

The Field Coupling Mechanism Study For Near Field Probe, Shun Liu

Masters Theses

"In this part, the radius of the loop is used to predict the voltage induced by the E- field in the circular loop antenna. The thin rectangle loop and thick rectangle loop have been investigated. The equivalent radius of the rectangle loop is estimated by the average of the one over the distance between the points on the loop to the center of the loop. The estimation matches with the numerical simulation"--Abstract, page iv.

Toward Understanding Commercial Additives For Zincate Electrogalvanizing, Margaret Scott

Masters Theses

"Cyanide zinc electrogalvanizing has been used for many years to produce high quality and uniform zinc coatings. Due to toxicity concerns, a significant amount of research has occurred to remove the use of cyanide while still producing a similar deposit. One of the resulting plating chemistries is the alkaline zincate bath.

Alkaline zincate plating has the advantages of low startup cost, low toxicity, and low corrosion rate. Despite these advantages, alkaline bath conditions do not produce acceptable zinc deposits without the use of plating additives, which can promote lustrous, smooth deposits. This research aims to: (1) generate fundamental electrochemical data …

The Role Of Psychological Reactance In Smart Home Energy Management Systems, Matthew Thomas Heatherly

Masters Theses

“With an ever-growing demand for energy, our increasing consumption is producing more greenhouse gases and other pollutants, impacting climate change. One approach to reducing residential energy consumption is through the use of smart energy management systems. However, automation from smart technology inherently removes a certain amount of control from the user. If loss of control is perceived as a loss of freedom, this may lead users to experience psychological reactance when using these products. A set of experiments was conducted to assess how three features of a message notification from smart home energy management systems may induce reactance in users. …

Development Of Complex Lattice Cell In Benchmark Model Of Particle Bed Critical System, Elijah Chamberlain Lutz

Masters Theses

“Criticality safety benchmark evaluations require the creation of models that most accurately represent the experiment being evaluated. In some cases this can be relatively trivial with experiments containing rather simple or standard geometry. In others, such as packed bed systems, this becomes unique and a more difficult process. The importance of accurate modeling of packed bed systems for the use of criticality safety benchmark evaluations was looked at. Four models were created of various complexities and accuracy. First the multi-particle bed, consisting of a fuel particle (UC_1.7 kernel with C shell) and two filler particles (Zircaloy-4 and C + …

Investigation Of The Sensitivity Of Human Arm To Small Interaction Forces During Physical Human-Robot Interaction (Phri), Fazlur Rashid

Masters Theses

“Understanding the human motor control strategy during physical interaction tasks is crucial for developing future robots for physical human-robot interaction (pHRI). Effective pHRI depends on humans communicating their intentions for movement with robots. In physical human-human interaction (pHHI), small interaction forces are known to convey their intent between the partners. It is speculated that small interaction forces contain significant information to convey the movement intention of pHHI. However, the mechanism underlying this interaction strategy is largely unknown. Hence, the aim of this work was to investigate what affects humans’ sensitivity to the interaction forces. The hypothesis was that small interaction …

A Compact Wavelength Meter Using A Multimode Fiber, Ogbole Collins Inalegwu

Masters Theses

“Wavelength meters are very important for precision measurements of both pulses and continuous-wave optical sources. Conventional wavelength meters employ gratings, prisms, interferometers, and other wavelength-sensitive materials in their design. Here, we report a simple and compact wavelength meter based on a section of multimode fiber and a camera. The concept is to correlate the multimodal interference pattern (i.e., speckle pattern) at the end-face of a multimode fiber with the wavelength of the input lightsource. Through a series of experiments, specklegrams from the end face of a multimode fiber as captured by a charge-coupled device (CCD) camera were recorded; the images …

Analysis And Design Of Dc-Link Capacitor In Cascaded H-Bridge Multilevel Active Front-End Converter, Muhammad Shehroz Malik

Masters Theses

Medium-voltage grid-tied systems often use a cascaded H-bridge multi-level active front-end. In this converter, dc link bus capacitors play an important role in stabilizing the converter and enabling both active and reactive power injections. The present work provides analytical expressions for the capacitor current, which are essential for optimizing system design (especially capacitor size vs. lifetime). Then, the expression is incorporated into the grid connected bidirectional power system model. Consequently, this work contributes to the guiding principles to choose accurate dc link capacitor ratings against grid-side power delivery requirements.

DC-link capacitors come with an expiration date which is dependent on …

Neural Network Supervised And Reinforcement Learning For Neurological, Diagnostic, And Modeling Problems, Donald Wunsch Iii

Masters Theses

“As the medical world becomes increasingly intertwined with the tech sphere, machine learning on medical datasets and mathematical models becomes an attractive application. This research looks at the predictive capabilities of neural networks and other machine learning algorithms, and assesses the validity of several feature selection strategies to reduce the negative effects of high dataset dimensionality. Our results indicate that several feature selection methods can maintain high validation and test accuracy on classification tasks, with neural networks performing best, for both single class and multi-class classification applications. This research also evaluates a proof-of-concept application of a deep-Q-learning network (DQN) to …

Axial Performance Of Self-Consolidating Concrete-Filled Fiber Tubes, Joshua David Carter

Masters Theses

"Concrete filled fiber tubes can be used to increase ductility and strength of a concrete member and self-consolidating concrete is an ideal material to use in practical applications of concrete-filled fiber tubular columns. However, the propensity of self-consolidating concrete to autogenous shrinkage could reduce the effectiveness of the concrete confinement. This research investigates the use of self-consolidating concrete in pre-cast FRP tubes and various methods of shrinkage reduction and compensation to increase the axial performance of said self-consolidating concrete-filled fiber tubes. Axial compression tests were performed under monotonic and cyclic conditions to determine the stress-strain relationship of the self-consolidating concrete …

Assessing Midbrain Abnormalities In Parkinson’S Disease Using Magnetic Resonance Imaging, Kiarash Ghassaban

Wayne State University Dissertations

Diagnosing early-stage Parkinson’s disease (PD) and its manifestations is still a clinical challenge. Previous imaging studies using iron, neuromelanin (NM) and the Nigrosome-1 (N1) measures in the substantia nigra (SN) by themselves have been unable to provide sufficiently high diagnostic performance for these methods to be adopted clinically. In this dissertation, we start by studying idiopathic PD patients at their intermediate stages of the disease to evaluate the role of global and regional iron in the major deep gray matter nuclei. Then, we only focus on the NM complex in the midbrain and how neuronal loss interact with iron overload …

Novel Design And Facile Synthesis Of Functional Nanostructures For Energy And Environmental Application, Zhuojun Wang

Wayne State University Theses

Environmental pollution and energy crisis are two of the major obstacles in the development of a more sustainable society. It is an interesting but technically challenging task to design novel methods for the facile and scalable synthesis of multifunctional materials for applications in both energy storage and environmental remediation. In this thesis, I tried to design and synthesize novel nanostructured materials for energy and environmental applications, achieved highly promising results. I developed a facile electrochemical approach to synthesize the zinc oxide with the zinc element for photocatalytic reactions. It demonstrated dramatically improved performances in degradation of organic pollutant in water, …

Uv-Ozone Oxide Treatments For High-Efficiency Silicon Photovoltaic Devices, Munan Gao

Electronic Theses and Dissertations, 2020-2023

Fabrication of solar cells with higher efficiency, simpler processes and lower cost is largely perceived as the ultimate goal for photovoltaic research. To reach such a goal each step needs to be refined and optimized. In this dissertation, a UV-ozone treatment is proposed as a simple and versatile process that can be applied to multiple fabrication steps for improvement. The UV-ozone cleaning method provides comparable surface cleaning quality to more expensive and hazardous industrial standard RCA clean with less chemical used. A good passivation quality was achieved on both n-type and p-type silicon wafer by a silicon oxide/aluminum oxide passivation …

Crash Analysis And Development Of Safety Performance Functions For Florida Roads In The Framework Of The Context Classification System, Ma'en Al-Omari

Electronic Theses and Dissertations, 2020-2023

Nowadays, technology is employed in many safety applications and countermeasures that would enhance traffic safety by influencing some crash-related factors. Therefore, crash-related factors must be determined for every roadway element by the development of safety performance functions. Safety performance functions (SPF) are employed to predict crash counts at the different roadway elements. Several SPFs have been developed for the various roadway elements based on different classifications such as functional classification and area type. Since a more detailed classification of roadway elements leads to more accurate crash predictions, multiple states have developed new system to categorize roads based on a comprehensive …

Material Properties Of 17-4ph Stainless Steel Fabricated With Cooling Holes By Atomic Diffusion Additive Manufacturing (Adam), Nandhini Raju

Electronic Theses and Dissertations, 2020-2023

The objective of this study is to investigate the material properties of 17-4PH stainless steel printed with cooling holes in different build orientations by the Atomic Diffusion Additive manufacturing technique. Samples with film cooling holes printed in different build orientations, with impingement inserts, impingement cavities were manufactured in a Markforged Metal-X machine. The presence of the holes in these samples helps to understand the printability and accuracy of internal cooling holes, as manufactured by the Metal-X machine. Manufactured samples were first washed to remove the plastic binder. These pre-sintered samples were tested, for density, microstructure analysis, roughness, Energy Dispersive X-ray …