Engineering Commons^™

Quantifying Charge Transport In Chemically Doped Semiconducting Polymers, Shawn Gregory

Link Foundation Energy Fellowship Reports

This report is for the Link Foundation, which generously provided me a graduate research fellowship. In this report, I outline a segment of the organic electronics and organic thermoelectrics fields, then detail the contributions I have made, and finally conclude with a perspective on these fields. Subsequently, in accordance with the fellowship reporting requirements, I list all articles that I have published or will publish whose funding originated (in part) from the Link Foundation. Lastly, I share some personal notes on how this fellowship impacted my PhD experience and career.

Asme Rc Baja Racer, Chesna Kern

All Undergraduate Projects

The American Society of Mechanical Engineers (ASME) holds a competition at their annual conference for college students to design an RC car that will compete in sprint, slalom, and obstacle course races. The RC Baja car was designed to complete every event in the competition with a focus on the obstacle course due to the anticipated impacts inflicted on the project car by jumps and other obstacles. The project was a collaborative effort. This presentation focuses on the chassis and suspension while Gizan Gando will present about the drivetrain. The drop and frontal impact test requirements guided the design process …

Jcati - Drive System, Tim Boswell

All Undergraduate Projects

Each year, Mechanical Engineering Technology students receive a grant from The Joint Center for Aerospace Technology Innovation (JCATI) to engineer a device that is capable of breaking down carbon fiber trimmings for recycling. The students who received the grant this year have redesigned portions of the existing system in an attempt to solve issues that have kept the system from working properly in the past. Though much collaboration between group members has been needed, each member has been responsible for their own portion of the project. The purpose of this portion of the project has been to address binding and …

Rc Baja-Drivetrain & Steering, Tucker Odegaard

All Undergraduate Projects

There was a need for an RC car that would turn the power of a brushless motor into torque to the wheels, in order for it to move forward and backward. The car needed to meet given requirements in order to compete in the annual American Society of Mechanical Engineers (ASME) RC Baja competition. The team requirements were to reach a top speed of 20 mph, turn 60° in both directions, survive a three-foot drop, and spend no more than $500 total on the project. In order to meet the requirements, the device chosen was an RC Baja that had …

Pulse Decay Thermal Conductivity Device, Matthew Schrenk

All Undergraduate Projects

Currently, there are several ways in which thermal conductivity can be calculated or assessed on a given material. However, with each method of testing comes potential limitations such as size, material state, complexity, and time. The goal of this study was to develop a pulse heated thermistor that would reduce all four limitations, thus provide precise and timely results regardless of the material state and size. A thermistor is resistor which changes resistance in accordance to temperature. To achieve the design, heat transfer and electrical methods were applied. As with all resistors, heat is dissipated across the element and released …

Rc Baja, Ryder Satak

All Undergraduate Projects

American Society of Mechanical Engineers (ASME) hosts an RC Baja competition yearly at Central Washington University where schools from around the state gather to compete. The competition is based and scored from three different events: drag race, slalom, and a Baja course. Performing well in both the competition and other various tests will deem the car successful. The differential and drive train are two important features that allow the car to function properly. Using Solidworks 3D software and a 3D printer, the engineers were able to design functional components. The differential is designed to allow the rear wheels to spin …

Articulated Balsa Wood Bridge, Isaac Chavez Ramirez

All Undergraduate Projects

The project chosen was the challenge of designing and constructing an articulating Balsa Wood Bridge that would withstand a minimum load of 18.9 kg. The first step was to find which design will best work for the requirements; a decision matrix has been used in this decision. Analyses were completed to find the geometry of each part that will support the load. The project construction was in sequences: the first sequence was the construction of each component, then the construction of 3 subassemblies, and finally was the construction of the entire project. The last part of the project was programming …

Jcati Base Plate, Jacob Atamian

All Undergraduate Projects

Students of the Mechanical Engineering Technology (MET) program at Central Washington University have contributed to an ongoing Carbon Fiber Recycler project funded by the Joint Center for Aerospace Technology Innovation (JCATI). The goal of this project was to modify the existing recycling system to produce a higher success rate of recycled carbon composite material. This report focuses on increasing the rigidity of the crushing gears so that the deflection occurring among the components during operation was below 0.005 inches to ensure proper operating conditions. The operating speed of the crushing gears was 2.5 rpm with a crushing load of 10,500 …

R/C Baja Chassis And Suspension, Donovan Dueber

All Undergraduate Projects

A team made up of two students have developed a unique design of a RC Baja Car to optimize functionality and performance. A Baja car is a remote controlled 1/10 scale car that is used for recreation or competition, usually meant for competing in the American Society of Mechanical Engineers (ASME) Baja car competition against various teams. The objective for the project was to create a unique suspension different from previous individual’s projects by creating a two-type suspension. This was completed by having a coil suspension in the front which allows more travel in the suspension of the car and …

Jcati Carbon Fiber Recycling Shredder, Benjamin Cooley

All Undergraduate Projects

Once carbon fibers are cast into a resin and used in a composite material, retrieving those fibers can be a difficult task. However, it is beneficial to recycle and reuse the fibers from old unneeded components rather than pay the cost of acquiring new ones. The Joint Center for Aerospace Technology Innovation (JCATI) carbon fiber recycling device condenses the multistep process of extracting the fibers by integrating all steps into one automated device. In the previous version of the device, the cutting blades turned the long composite strips into thin fingers but did not sever them across the width.

The …

Balsa Wood Drawbridge, Kyle Engebretson

All Undergraduate Projects

Which truss design is best suited to a drawbridge when precision equipment is unavailable for the construction process and what design is suitable for the articulation system? To address this problem, several different designs were considered for a truss made of balsa wood. Initially a warren truss, a k-truss, and a bowstring truss were considered. The designs were evaluated using a decision matrix, the winning design was produced and tested. The testing methods used were a mass limit of the bridge, a minimum length requirement, loading requirements, and a minimum height for the roadway to reach when raised. Various other …

Balsa Wood Bridge, Joshua Nye

All Undergraduate Projects

The project requires the individual to design and construct a truss bridge made from balsa wood and wood glue to perform several objectives. The main objectives are to articulate the bridge by raising it, to conform to dimensional requirements, to allow a vehicle to travel along the road deck, and to hold a minimum load. The bridge must be able to articulate in two different ways. First, the articulation system can lift the road deck vertically while on top of the bridge. Second, raise the bridge with a pivot when the articulation system is placed at the specified end of …

Thermal Conductivity Measuring System (Tcoms), Lucas Hill

All Undergraduate Projects

The Mechanical Engineering Technology department at Central Washington University is lacking a method to reliably measure the thermal conductivity of bulk materials, with dimensions of at least a 1 cm radius, within a teaching environment. Thermal Conductivity Measuring System (TCoMS) will be a useful tool to perform these measurements as it is able to obtain measurement readings for materials between 0 C and 50 C within 20 seconds. TCoMS will accomplish this by using the pulse decay method of measuring thermal conductivity, a form of transient heat transfer analysis. This method is performed by generating a pulse of heat at …

Balsa Wood Bridge, Anndie Watterson

All Undergraduate Projects

A model for a strong bridge that could span a set distance and rise up to allow for passage underneath was requested, and specifications for the design were given. The model bridge was designed out of balsa wood to meet all the requirements. Using structural and material analysis and simple mechanical designs, a bridge was designed and constructed out of balsa wood, wood glue, and metal components used for articulation that met all of the criteria set by the assigner. The bridge was tested to ensure all specifications were met. The resulting bridge can hold 20kg of weight suspended from …

Thermal Conductivity Measuring Device, Kyle Saalfeld

All Undergraduate Projects

The thermal conductivity measuring device is used to measure thermal conductivity of solids, liquids, and food products. Thermal conductivity is a material property that determines the rate at which heat disperses through a material. This determines how well insulation works, what materials are used as heat sinks, refrigeration, and how thoroughly food is cooked. The device measures thermal conductivity by heating up a thermistor bead using a high magnitude current for a measured duration and allowing the given heat to disperse; meeting the goal of designing a device that can easily measure the conductivity. Additional requirements of this device include …

Rc Baja Car: Suspension And Chassis, Colton Hague

All Undergraduate Projects

An RC Baja car was designed and manufactured to compete in the ASME RC Baja competition. The American Society of Mechanical Engineering (ASME) Baja competition is a time trial that has a variety of obstacles like jumps, rocks, and turns. The objective of the project was to improve the performance of the suspension and chassis while offering a variety of different adjustments that can be made to fit a given terrain. To begin the design process, a benchmark car was selected, and research was performed on trophy trucks to incorporate suspension features into the design. Using engineering methods, analyses was …

Quantitative Assessment Of Intra- And Inter-Modality Deformable Image Registration Of The Heart, Left Ventricle, And Thoracic Aorta On Longitudinal 4d-Ct And Mr Images, Alireza Omidi, Elisabeth Weiss, John S. Wilson, Mihaela Rosu-Bubulac

Biomedical Engineering Publications

Purpose

Magnetic resonance imaging (MRI)-based investigations into radiotherapy (RT)-induced cardiotoxicity require reliable registrations of magnetic resonance (MR) imaging to planning computed tomography (CT) for correlation to regional dose. In this study, the accuracy of intra- and inter-modality deformable image registration (DIR) of longitudinal four-dimensional CT (4D-CT) and MR images were evaluated for heart, left ventricle (LV), and thoracic aorta (TA).

Methods and materials

Non-cardiac-gated 4D-CT and T1 volumetric interpolated breath-hold examination (T1-VIBE) MRI datasets from five lung cancer patients were obtained at two breathing phases (inspiration/expiration) and two time points (before treatment and 5 weeks after initiating RT). Heart, LV, …

A Half-Yearly Newsletter Of The Department Of Mechatronics V1 S2 [Jan 2019], Chandrashekhar Bhat

Faculty work

No abstract provided.

A Half- Yearly E-Newsletter Of The Department Of Computer Science And Engineering, Manipal Institute Of Technology - Jan 2021, Ashalatha Nayak Dr.

Faculty work

No abstract provided.

Applying Model Approaches In Non-Model Systems: A Review And Case Study On Coral Cell Culture, Liza M. Roger, Hannah Reich, Evan Lawrence, Shuaifeng Li, Whitney Vizgaudis, Nathan Brenner, Lokender Kumar, Judith Klein-Seetharaman, Jinkyu Yang, Hollie M. Putnam, Nastassja Lewinski

Chemical and Life Science Engineering Publications

Model systems approaches search for commonality in patterns underlying biological diversity and complexity led by common evolutionary paths. The success of the approach does not rest on the species chosen but on the scalability of the model and methods used to develop the model and engage research. Fine-tuning approaches to improve coral cell cultures will provide a robust platform for studying symbiosis breakdown, the calcification mechanism and its disruption, protein interactions, micronutrient transport/exchange, and the toxicity of nanoparticles, among other key biological aspects, with the added advantage of minimizing the ethical conundrum of repeated testing on ecologically threatened organisms. The …

Machine Assisted Experimentation Of Extrusion-Based Bioprinting Systems, Shuyu Tian, Rory Stevens, Bridget T. Mcinnes, Nastassja Lewinski

Chemical and Life Science Engineering Publications

Optimization of extrusion-based bioprinting (EBB) parameters have been systematically conducted through experimentation. However, the process is time- and resource-intensive and not easily translatable to other laboratories. This study approaches EBB parameter optimization through machine learning (ML) models trained using data collected from the published literature. We investigated regression-based and classification-based ML models and their abilities to predict printing outcomes of cell viability and filament diameter for cell-containing alginate and gelatin composite bioinks. In addition, we interrogated if regression-based models can predict suitable extrusion pressure given the desired cell viability when keeping other experimental parameters constant. We also compared models trained …

Moving Beyond ‘More Crop Per Drop’: Insights From Two Decades Of Research On Agricultural Water Productivity, Meredith Giordano, Susanne M. Scheierling, David O. Tréguer, Hugh Turral, Peter G. Mccornick

Daugherty Water for Food Global Institute: Faculty Publications

Concern over increasing water scarcity has led to the introduction of the concept of agricultural water productivity and an emphasis on interventions to achieve ‘more crop per drop’. Yet, a strong debate continues on how the concept is to be defined and used. Drawing largely from the irrigation literature, the origins of the concept and its methodological developments are reviewed, and its use in applied work over two decades is discussed. Based on this analysis of conceptual and applied research, key insights into the concept’s contributions and limitations are presented, as well as opportunities for further refinements.

Esl Club Newsletter Contributes To Inclusiveness On Campus, Phillip Fitzsimmons, April Miller

Faculty Books & Book Chapters

The SWOSU ESL Club Newsletter (https://dc.swosu.edu/esl) is one of the many activities that contribute to inclusiveness at Southwestern Oklahoma State University, in Weatherford.

An Lpc Pole Processing Method For Enhancing The Identification Of Dominant Spectral Features, Jin Xu, Mark Davis, Ruairí De Fréin

Articles

This paper proposes a new time-resolved spectral analysis method based on a modification to the Linear Predictive Coding (LPC) method for enhancing the identification of the dominant frequencies of a signal. The method described here is based on a z-plane analysis of the LPC poles. These poles are used to produce a series of reduced order filter transfer functions which can accurately identify and estimate the frequency of the dominant spectral features. The standard LPC method has been shown to suffer from a sensitivity to noise and its performance is dependent on the filter order. The proposed method can accurately …

Hybrid Modelling For Stroke Care: Review And Suggestions Of New Approaches For Risk Assessment And Simulation Of Scenarios, Tilda Herrgårdh, Vince I. Madai, John Kelleher, Rasmus Magnusson, Mika Gustafsson, Lili Milani, Peter Gennemark, Gunnar Cedersund

Articles

Stroke is an example of a complex and multi-factorial disease involving multiple organs, timescales, and disease mechanisms. To deal with this complexity, and to realize Precision Medicine of stroke, mathematical models are needed. Such approaches include: 1) machine learning, 2) bioinformatic network models, and 3) mechanistic models. Since these three approaches have complementary strengths and weaknesses, a hybrid modelling approach combining them would be the most beneficial. However, no concrete approach ready to be implemented for a specific disease has been presented to date. In this paper, we both review the strengths and weaknesses of the three approaches, and propose …

A Critical Analysis Of The Application Of Augmented Reality (Ar) For Monitoring And Documentation Of Construction Site Progress In The Irish Aec Industry., Bim Tudublin, Lukasz Sarnot

Capstone Reports

Sarnot, L. (2021) A critical analysis of the application of augmented reality (AR) for monitoring and documentation of construction site progress in the Irish AEC industry, Capstone Project from the MSc in aBIMM

The U-Net-Based Active Learning Framework For Enhancing Cancer Immunotherapy, Vishwanshi Joshi

Theses, Dissertations and Capstones

Breast cancer is the most common cancer in the world. According to the U.S. Breast Cancer Statistics, about 281,000 new cases of invasive breast cancer are expected to be diagnosed in 2021 (Smith et al., 2019). The death rate of breast cancer is higher than any other cancer type. Early detection and treatment of breast cancer have been challenging over the last few decades. Meanwhile, deep learning algorithms using Convolutional Neural Networks to segment images have achieved considerable success in recent years. These algorithms have continued to assist in exploring the quantitative measurement of cancer cells in the tumor microenvironment. …

An Analysis Of Estimated Costs Versus Actual Costs In Usace Section 14 Emergency Streambank Protection Projects, Hunter Waugaman

Theses, Dissertations and Capstones

The U.S. Army Corps of Engineers (USACE) Civil Works projects are designed to provide national management of water resources. These works use emergency streambank protection to protect public facilities, like bridges and highways. The projects under this authority have limited funding, therefore, many design and field studies are omitted, which increases project uncertainties resulting in cost overruns and contract modifications. This study analyzes previously constructed projects by comparing the independent government estimate with the contractor’s actual costs and identifying the variables causing these differences via statistical analysis. The variables identified are categorized into those elements that affect the accuracy of …

Asset Management Framework For The United States Army Corps Of Engineers Lock And Dam Electrical Equipment, Megan Elizabeth Bates

Theses, Dissertations and Capstones

The focus of this thesis is to design an efficient and effective preventative maintenance program for the electrical equipment that the United States Army Corps of Engineers (USACE) operates at the locks and dams. This thesis presents the concept of asset management and designs a framework to manage the electrical assets at USACE. The methodology was tested, and the results validated the framework proposed in this thesis. The framework was tested on two separate projects and the results were the same optimized strategies, which shows that the framework is robust and can be implemented into each project and can give …

Climate Resilience: Examination Of Revised Heat Transfer Models In The Enhanced Integrated Climatic Model For Pavement Temperature Prediction, Austin Michael Jarrell

Theses, Dissertations and Capstones

The Mechanistic Empirical Pavement Design Guide (MEPDG) is commonly referenced as the state-of-the-practice for the analysis and design of new and rehabilitated pavement assets. The Enhanced Integrated Climatic Model (EICM) incorporated within the MEPDG is a well-recognized and standardized method for estimating temperature profiles in pavements; temperature is a portion of the climate inputs in the MEPDG. Many have already begun to convert atmospheric temperature predictions from externally based climate models into the MEPDG to create robust designs for climate change. As pavement designers and researchers seek robust solutions while formulating resilient pavement designs, it is likely that the EICM …