Engineering Commons^™

Physical And Chemical Properties, Elemental Composition And Microbiological Purity Of Oil Extract Of Chamomile Flowers In Bitter Almond Oil, Khakim Tukhtaev, Sevara Khazratkulova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study was to obtain an oil extract with the participation of chamomile officinalis (Matrigaria Recutito) grown in the Tashkent region using bitter almond oil (Amygdalus communis L.). Its chromatographic and elemental analyzes have been carried out, its microbiological purity and physicochemical constants have been determined. For extraction, we used bitter almond oil obtained by cold pressing. Extraction of chamomile flowers in bitter almond oil was carried out by maceration in the ratio of raw material: solvent (1:10). Analysis of fatty acids in the fatty extract was carried out chromatographically. The fatty extract was found to contain …

In-Situ Calibrated Modeling Of Residual Stresses Induced In Machining Under Various Cooling And Lubricating Environments, Julius M. Schoop

Mechanical Engineering Faculty Publications

Although many functional characteristics, such as fatigue life and damage resistance depend on residual stresses, there are currently no industrially viable ‘Digital Process Twin’ models (DPTs) capable of efficiently and quickly predicting machining-induced stresses. By leveraging advances in ultra-high-speed in-situ experimental characterization of machining and finishing processes under plane strain (orthogonal/2D) conditions, we have developed a set of physics-based semi-analytical models to predict residual stress evolution in light of the extreme gradients of stress, strain and temperature, which are unique to these thermo-mechanical processes. Initial validation trials of this novel paradigm were carried out in Ti-6Al4V and AISI 4340 alloy …

Study Of Laser Based Additive Manufacturing For Titanium And Copper Alloys, Congyuan Zeng

LSU Doctoral Dissertations

Material processing by laser is increasingly applied in industrial applications for its outstanding characteristics, such as localized heating, high efficiency, and high manufacturing precision. In this study, two kinds of laser material processing strategies were investigated, namely laser surface engineering and laser-powder-bed fusion additive manufacturing, with pure titanium and copper alloys as target materials, respectively.

For laser surface engineering related studies, the work includes the investigation of the dynamic interactions between titanium and pure nitrogen or ambient air under transient laser processing conditions. Thanks to the in-situ synchrotron X-ray diffraction tests, the high-temperature reaction steps between titanium and pure nitrogen/ambient …

Sharing Airspace: Simulation Of Commercial Space Horizontal Launch Impacts On Airlines And Finding Solutions, Janet K. Tinoco, Chunyan Yu, Rodrigo Firmo, Carlos Alberto Castro, Mohammad Moallemi, Ryan Babb

Publications

Commercial space transportation is becoming more affordable and accessible. Consequently, we expect to see significant expansion of commercial space launch activities in the coming decade. As space vehicles travel through airspace during the launch and re-entry stages, they potentially disrupt the regular operations of traditional users. This paper estimates the potential economic and operational impacts of commercial space horizontal launch activities on airlines under various launch scenarios using predictive fast-time simulation modeling, focusing on Cecil Air and Space Port in Jacksonville (Florida) and the rules governing the national airspace system (NAS) in the United States. Our results indicate that the …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• IT Student Received the Best Presenter Award in International Conference

A Bibliometric Analysis Of Authentication Based Access Control In Cloud Using Blockchain, Yogesh Gajmal, Udayakumar R.

Library Philosophy and Practice (e-journal)

Access Control is mentioned to as the imprisonment of particular activities of an individual to carry out an action. Cloud storing similar to any other untrusted surroundings wants the capacity to protect the shared data. The one of the apparatus of access mechanism is ciphertext-policy attribute-based encryption system over and done with dynamic characteristics. With a blockchain based distributed ledger, the scheme offers immutable log of whole significant safety events, for example key generation, change or revocation, access policy assignment, access request etc. Number of different problems similar to single point of failure, security and privacy etc. were targeted through …

Bibliometric Survey On Image Processing Techniques Using Lattice Boltzmann Method For Cfd Simulations, Priyambada Praharaj Mrs, Chandrakant Sonawane Dr, Madhura Ingalhalikar Dr

Library Philosophy and Practice (e-journal)

This bibliometric analysis aims to understand how Lattice Boltzmann Method could be a potential solver in integrating computational fluid dynamics with image segmentation smoothly. Cardiovascular diseases have been a major health problem in our society and have been an interesting topic for researchers to focus on. Computational Fluid dynamics (CFD) simulation on well-segmented patient-specific images could help the clinicians in diagnosing many cardiovascular diseases in the initial stages itself thereby avoiding surgery. This paper focuses on how various methods have been used since 1988 and been successfully implemented in subsequent years. The bibliometric analysis is done from Scopus and the …

Experimental And Numerical Investigation In Directed Energy Deposition For Component Repair, Lan Li, Xinchang Zhang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Directed energy deposition (DED) has been widely used for component repair. In the repair process, the surface defects are machined to a groove or slot and then refilled. The sidewall inclination angle of the groove geometry has been recognized to have a considerable impact on the mechanical properties of repaired parts. The objective of this work was to investigate the feasibility of repairing various V-shaped defects with both experiments and modeling. At first, the repair volume was defined by scanning the defective zone. Then, the repair volume was sliced to generate the repair toolpath. After that, the DED process was …

Uav Recognition Based On Micro-Doppler Dynamic Attribute-Guided Augmentation Algorithm, Caidan Zhao, Gege Luo, Yilin Wang, Caiyun Chen, Zhiqiang Wu

Electrical Engineering Faculty Publications

A micro-Doppler signature (m-DS) based on the rotation of drone blades is an effective way to detect and identify small drones. Deep-learning-based recognition algorithms can achieve higher recognition performance, but they needs a large amount of sample data to train models. In addition to the hovering state, the signal samples of small unmanned aerial vehicles (UAVs) should also include flight dynamics, such as vertical, pitch, forward and backward, roll, lateral, and yaw. However, it is difficult to collect all dynamic UAV signal samples under actual flight conditions, and these dynamic flight characteristics will lead to the deviation of the original …

Comparative Study Of Human Pluripotent Stem Cell-Derived Endothelial Cells In Hydrogel-Based Culture Systems, Zhanqi Wang, Fuxing Zuo, Qing Liu, Xuesheng Wu, Qian Du, Yuguo Lei, Zhangmin Wu, Haishuang Lin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Human pluripotent stem cell (hPSC)-derived endothelial cells (ECs) are promising cell sources for drug discovery, tissue engineering, and studying or treating vascular diseases. However, hPSC-ECs derived from different culture methods display different phenotypes. Herein, we made a detailed comparative study of hPSC-ECs from three different culture systems (e.g., 2D, 3D PNIPAAm-PEG hydrogel, and 3D alginate hydrogel cultures) based on our previous reports. We expanded hPSCs and differentiated them into ECs in three culture systems. Both 3D hydrogel systems could mimic an in vivo physiologically relevant microenvironment to protect cells from shear force and prevent cell agglomeration, leading to a high …

Towards A Blockchain Assisted Patient Owned System For Electronic Health Records, Tomilayo Fatokun, Avishek Nag, Sachin Sharma

Articles

Security and privacy of patients’ data is a major concern in the healthcare industry. In this paper, we propose a system that activates robust security and privacy of patients’ medical records as well as enables interoperability and data exchange between the different healthcare providers. The work proposes the shift from patient’s electronic health records being managed and controlled by the healthcare industry to a patient-centric application where patients are in control of their data. The aim of this research is to build an Electronic Healthcare Record (EHR) system that is layered on the Ethereum blockchain platform and smart contract in …

Development Of Design Tables For The Cold-Formed Steel Cross-Sections In Aisi D100, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report with the tables in an Excel file intends to provide the local and distortional buckling strengths for the cross-sections provided in AISI Cold-Formed Steel Design Manual to aid design engineers.

Development Of Cufsm Hole Module And Design Tables For The Cold-Formed Steel Cross-Sections With Typical Web Holes In Aisi D100, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report summarizes the effort to develop a simple hole module to perform elastic buckling analysis to obtain the design parameters needed for DSM considering the influence of holes. The hole module requires simple inputs and direct outputs of the elastic buckling information of the local and distortional buckling modes for both gross sections and sections with hole influences.

Review Of Testing By Analysis For Potential Implementation Into Aisi Standards, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

New product development is crucial to allow innovation in the cold-formed steel structural industry. However, the required physical testing of new components and assemblies are often a cost barrier which prevents implementation and slows new product development. Testing by analysis can be a good alternative to physical testing as it reduces the expense and time for performing physical experiments, however, two considerations are necessary to ensure accurate results. First, it requires a rational engineering analysis to calculate the capacities and deformations of the system, and the requirements to produce accurate analyses must be explicitly stated. Second, it is necessary to …

Steel Diaphragm Innovation Initiative, Year 5, Final Report, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Summary

The Steel Diaphragm Innovation Initiative (SDII) is a multi-year industry-academic-government partnership to advance the seismic performance of steel floor and roof diaphragms utilized in steel buildings. This report provides a final report for Year 5 of the overall 5-year SDII plan. Contributions in the final 12 months (1 Jan. 2020 – 31 Dec. 2020) include the following highlights.

Innovation and Practice:

• Adoption in ASCE 7 of new provisions for bare steel deck including methods for buildings with rigid walls and flexible diaphragms, alternative diaphragm design with R_s, and special seismic detailing (following on from successful adoption in …

Tutorials For Mastan 2 And Related Validation, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report creates the tutorials helping engineers to correctly model and analyze structural systems comprised of non-doubly symmetric sections using the latest version of MASTAN2. The report also validated a MASTAN2 model using non-doubly symmetric sections against results from a small test program. The following report and tutorials are provided:

AISI Small Project Summary – Tutorials for MASTAN2 and Related Validation

• Tutorial for MASTAN2 v5.1 - Introductory Frame
• Tutorial for MASTAN2 v5.1 - Pour Stop Beam
• Tutorial for MASTAN2 v5.1 - Steel Joist

A Macro-Scale Ruck And Tuck Mechanism For Deformation In Ion-Irradiated Polycrystalline Graphite, Steve Johns, Karthik Chinnathambi

Materials Science and Engineering Faculty Publications and Presentations

A vein structure, which becomes more pronounced with increasing ion dose, was found on the surface of polycrystalline HOPG (highly oriented pyrolytic graphite) implanted by ex situ C⁺ (up to 1.8x10¹⁷ ions/cm²), and in situ Ar⁺ in a transmission electron microscope (TEM). These veins are found to be independent of the crystallographic orientations and are associated with the formation of pores. Underneath the veins, a triangular-shaped core was formed with the graphite platelet inside the core displaced up towards the surface. A macro-scale ‘ruck&tuck’ geometry was thus generated at these triangle structure boundaries. Progressive movement …

Open-Source Molecular Modeling Software In Chemical Engineering Focusing On The Molecular Simulation Design Framework, Eric Jankowski

Materials Science and Engineering Faculty Publications and Presentations

Molecular simulation has emerged as an important sub-field of chemical engineering, due in no small part to the leadership of Keith Gubbins. A characteristic of the chemical engineering molecular simulation community is the commitment to freely share simulation codes and other key software components required to perform a molecular simulation under open-source licenses and distribution on public repositories such as GitHub. Here we provide an overview of opensource molecular modeling software in Chemical Engineering, with focus on the Molecular Simulation Design Framework (MoSDeF). MoSDeF is an open-source Python software stack that enables facile use of multiple open-source molecular simulation engines, …

Blood Driven Biopower Cells: Acquiring Energy From Reverse Electrodialysis Using Sodium Concentrations From The Flow Of Human Blood, Efecan Pakkaner, Chase Smith, Christina Trexler, Jamie Hestekin, Christa Hestekin

Chemical Engineering Faculty Publications and Presentations

With the growth of the healthcare industry, small scale power sources are needed to support advancements in medical implants, artificial organs, and sensors throughout the body. However, it remains a challenge to find safe, reliable, and stable power sources for these devices. In this study, a miniaturized reverse electrodialysis (RED) biopower cell design using physiological salinity concentration differences between renal bloodstreams is explored for its potential to be used as a power supply for implantable medical devices. Two small scale RED devices produced consistent power for up to three to ten days, depending on the device design. A two-fold decrease …

Hemodynamic Response To Device Titration In The Shunted Single Ventricle Circulation - A Patient Cohort Modeling Study, Chet Villa, Farha Zafar, Angela Lorts, Ethan Kung

Publications

Clinical outcomes of ventricular assist device (VAD) support for shunted single ventricle patients trail the larger population due in part to the challenges in optimizing VAD support and balancing systemic and pulmonary circulations. We sought to understand the response to VAD titration in the shunted circulation using a lumped-parameter network modeling six patient-specific clinical cases. Hemodynamic data from six patients (mean body surface area = 0.30 m²) with a systemic-to-pulmonary shunt was used to construct simulated cases of heart failure and hemodynamic response to increasing VAD flow from 5 to 10 L/min/m². With increasing VAD flow, …

Machine Learning Methods To Map Stabilizer Effectiveness Based On Common Soil Properties, Amit Gajurel, Bhaskar Chittoori, Partha Sarathi Mukherjee, Mojtaba Sadegh

Civil Engineering Faculty Publications and Presentations

Most chemical stabilization guidelines for subgrade/base use unconfined compressive strength (UCS) of treated soils as the primary acceptance criteria for selecting optimum stabilizer in laboratory testing. Establishing optimal additive content to augment UCS involves a resource-intensive trial-and-error procedure. Also, samples collected from discrete locations for laboratory trials may not be representative of the overall site. This study aims to minimize the number of laboratory trials and help strategize sampling locations by developing spatial maps of UCS at different treatment levels for lime and cement. These spatial maps were developed using machine-learning techniques, and using a database compiled from various reported …

Low-Complexity Zonotopes Can Enhance Uncertainty Quantification (Uq), Olga Kosheleva, Vladik Kreinovich

Departmental Technical Reports (CS)

In many practical situations, the only information that we know about the measurement error is the upper bound D on its absolute value. In this case, once we know the measurement result X, the only information that we have about the actual value x of the corresponding quantity is that this value belongs to the interval [X − D, X + D]. How can we estimate the accuracy of the result of data processing under this interval uncertainty? In general, computing this accuracy is NP-hard, but in the usual case when measurement errors are relatively small, we can linearize the …

Initial Project Estimates For Design, Right Of Way, Utilities, And Construction, Christopher Van Dyke, Bryan Gibson, Jeff Jasper, Bob Lewis, Doug Kreis

Kentucky Transportation Center Research Report

Estimating the cost of highway construction projects is among the more challenging tasks state transportation agencies routinely deal with. Developing accurate estimates is a particularly fraught exercise during the planning and scoping phases, when projects have not been thoroughly defined and information on specifics is in short supply. While the Kentucky Transportation Cabinet (KYTC) has used several methodologies to generate initial cost estimates for design, right of way, utilities, and construction (DRUC), approaches vary between the agency’s districts. This report proposes a framework for estimating DRUC-related expenses that can be adopted throughout the state. Kentucky Transportation Center (KTC) researchers developed …

Temperature Effects On Gated Silicon Field Emission Array Performance, Ranajoy Bhattacharya, Nedeljko Karaulac, Winston Chern, Akintunde Ibitayo Akinwande, Jim Browning

Electrical and Computer Engineering Faculty Publications and Presentations

Silicon field emitter arrays (Si FEAs) are being explored as an electron source for vacuum channel transistors for high temperature electronics. Arrays of 1000 × 1000 silicon tip based gated field emitters were studied by measuring their electrical characteristics up to 40 V of DC gate bias with a 1.3 mA emission current at different temperatures from 25 to 400 °C. At ∼350 °C, residual gas analyzer measurements show that water desorption and carbon dioxide partial pressures increase significantly, the gate to emitter leakage current decreases by more than ten times, and the collector current increases by more than ten …

Chalcogenide Glass-Capped Fiber-Optic Sensor For Real-Time Temperature Monitoring In Extreme Environments, Bahareh Badamchi, Al-Amin Ahmed Simon, Maria Mitkova, Harish Subbaraman

Electrical and Computer Engineering Faculty Publications and Presentations

We demonstrate a novel chalcogenide glass (ChG)-capped optical fiber temperature sensor capable of operating within harsh environment. The sensor architecture utilizes the heat-induced phase change (amorphous-to-crystalline) property of ChGs, which rapidly (80–100 ns) changes the optical properties of the material. The sensor response to temperature variation around the phase change of the ChG cap at the tip of the fiber provides abrupt changes in the reflected power intensity. This temperature is indicative of the temperature at the sensing node. We present the sensing performance of six different compositions of ChGs and a method to interpret the temperature profile between 440 …

Pomegranate: Procedural 3d Tree Creation Via User-Defined L-Systems, Jeremy Berchtold

Computer Science and Software Engineering

Pomegranate creates procedural 3D trees based on a user-specified template. The template supports randomness and allows users to generate an entire forest of unique trees from a single template. The output trees are a single closed mesh without intersecting geometry (with the exception of leaves). Additionally, the output contains a skeletal rig used for animating the trees. Pomegranate produces textured trees that can use either a realistic or stylized look, as well as supporting different mesh densities for games or film. Since this project uses a procedural workflow, artists can quickly create and make edits to their trees. This increase …

Free-Standing, Thin-Film Sensors For The Trace Detection Of Explosives, Peter P. Ricci, Otto J. Gregory

Chemical, Biomolecular, and Materials Engineering Faculty Publications

In a world focused on the development of cybersecurity, many densely populated areas and transportation hubs are still susceptible to terrorist attacks via improvised explosive devices (IEDs). These devices frequently employ a combination of peroxide based explosives as well as nitramines, nitrates, and nitroaromatics. Detection of these explosives can be challenging due to varying chemical composition and the extremely low vapor pressures exhibited by some explosive compounds. No electronic trace detection system currently exists that is capable of continuously monitoring both peroxide based explosives and certain nitrogen based explosives, or their precursors, in the vapor phase. Recently, we developed a …

Zinc Gallate Spinel Dielectric Function, Band-To-Band Transitions, And Γ-Point Effective Mass Parameters, Matthew J. Hilfiker, Megan Stokey, Rafal Korlacki, Ufuk Kilic, Zbigniew Galazka, Klaus Irmscher, Stefan Zollner, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

We determine the dielectric function of the emerging ultrawide bandgap semiconductor ZnGa₂O₄ from the near-infrared (0.75 eV) into the vacuum ultraviolet (8.5 eV) spectral regions using spectroscopic ellipsometry on high quality single crystal substrates. We perform density functional theory calculations and discuss the band structure and the Brillouin zone Γ-point band-to-band transition energies, their transition matrix elements, and effective band mass parameters. We find an isotropic effective mass parameter (0.24m_e) at the bottom of the Γ-point conduction band, which equals the lowest valence band effective mass parameter at the top of the highly anisotropic …

Quantitative Evaluation Of Asphalt Binder Extraction From Hot Mix Asphalt Pavement Using Ashing And Centrifuge Methods, Ahmed Hemida, Magdy Abdelrahman, Eslam Deef-Allah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt binder requires more investigation to be accurately and precisely extracted since it is an effective procedure for quality assurance quality control (QA/QC) and subsequent binder characterization. In this research, the authors presented a hands-on experience with binder extraction to deliver recommendations concerning the sensitive steps that may affect the outcomes (extracted binder content, P_be%). Two mineral matter determination methods (ashing and centrifuge) were addressed based on the centrifuge extraction method. Field cores were investigated by comparing the P_be% to the actual binder content, P_ba%. Analysis of variance (ANOVA) and Tukey Post-Hoc statistical analyses, …

Kontrollimi I Cilësisë Ne Vendin E Ndertimit-Punishte Gjatë Zbatimit Të Strukturave Betonarme, Florim H. Bytyqi

Theses and Dissertations

Në këtë temë do të flasim për Cilësin e betonit dhe vetitë e betonit të njomë dhe të ngurtësuar, në veçanti për betonin, komponentët e betonit, përparësitë dhe mangësit, vetitë e tij, si dhe për llojet e betonit, poashtu edhe për rezistencën në shtypje. Duke ditur që betoni është njëri ndër materialet më të përdorura në ndërtimin e strukturave, të cilat përditë e më tepër po bëhen objekt i arritjeve shkencore në inxhinierinë e ndërtimit si në aspektin e lartësisë (etazhitetit), e po ashtu edhe aplikimin e betoneve “të reja” speciale. Fabrikave per prodhimie betonit si dhe mjetet e transportit …