Engineering Commons^™

Quantifying Surface Morphology Of Manufactured Activated Carbon And The Waste Coffee Grounds Using The Getis-Ord-Gi* Statistic And Ripley’S K Function, Sanghoon Lee, Sukjoon Na, Olivia G. Rogers, Sungmin Youn

All Engineering Faculty Research

Activated carbon can be manufactured from waste coffee grounds via physical and/or chemical activation processes. However, challenges remain to quantify the differences in surface morphology between manufactured activated carbon granules and the waste coffee grounds. This paper presents a novel quantitative method to determine the quality of the physical and chemical activation processes performed in the presence of intensity inhomogeneity and identify surface characteristics of manufactured activated carbon granules and the waste coffee grounds. The spatial density was calculated by the Getis-Ord-Gi* statistic in scanning electron microscopy images. The spatial characteristics were determined by analyzing Ripley’s K function and complete …

Intersection Redesign For Network Resilience And Safety, Antonio Pratelli, Pietro Leandri, Rosaria Aiello, Reginald R. Souleyrette

Civil Engineering Faculty Publications

This paper describes a procedure for improving the resilience of roadway networks. A methodology is outlined that develops a time-dependent and performance-based resilience index. This methodology was applied to an Italian road, with the aim of optimizing intersections that are critical due to inadequate baseline capacity. The methodology uses a calibrated microscopic traffic model (using Aimsun™) whereby average delay at intersection approaches are estimated by an analytical model. From the simulation, average speed over time is obtained for each approach. These values in turn are used as inputs for calculating each intersection’s resilience index. The procedure allows the identification of …

Method For Radio Tomographic Image Formation, Richard K. Martin

AFIT Patents

A method for generating radio tomographic images is provided. A plurality of transceivers positioned around a region to be imaged is divided into a plurality of pixels. A control apparatus is configured to cause each of the plurality of transceivers in turn to send a signal to each of the other transceivers. The control apparatus is further configured to determine an attenuation in the received signals, generate weighing, derivative, and attenuation matrices from the signals, group the pixels into a plurality of provinces, select each province in turn and solve for a change in attenuation in each of the pixels …

Numerical Modeling Of The Fiber Deposition Flow In Extrusion-Based 3d Bioprinting, Dhanvanth Jaya Talluri

Theses and Dissertations

Extrusion bioprinting involves the deposition of bioinks in a layer-wise fashion to build 3D structures that mimic natural living systems' behavior in tissue engineering. Hydrogels are the most common bioinks, in which their viscosity properties are dependent on the shear-rate, such as Non-Newtonian fluids. Numerical simulation of extrusion bioprinting may help study the flow properties of hydrogels and designing improved bioinks. In this thesis, the instability caused by the shear-thinning or -thickening parameter during extrusion is numerically compared with the theoretical estimations. The process of fiber deposition of hydrogels onto a substrate through the single and coaxial nozzle is done …

A Photoanode With Hierarchical Nanoforest Tio 2 Structure And Silver Plasmonic Nanoparticles For Flexible Dye Sensitized Solar Cell, Brishty Deb Choudhury, Chen Lin, Sk Md Ali Zaker Shawon, Javier Soliz-Martinez, Hasina Huq, Mohammed Jasim Uddin

Electrical and Computer Engineering Faculty Publications

Due to unique photovoltaic properties, the nanostructured morphologies of TiO2 on flexible substrate have been studied extensively in the recent years for applications in dye sensitized solar cells (DSSCs). Microstructured electrode materials with high surface area can facilitate rapid charge transport and thus improve the light-to-current conversion efficiency. Herein we present an improved photoanode with forest like photoactive TiO2 hierarchical microstructure using a simple and facile hydrothermal route. To utilize the surface plasmon resonance (SPR) and hence increase the photon conversion efficiency, a plasmonic nanoparticle Ag has also been deposited using a very feasible photoreduction method. The branched structure of …

On The Dynamic Generation Of Megagauss-Level Magnetic Fields On 100-Ns Timescales To Stabilize And Magnetize Pulsed-Power-Driven Liner Implosions, Gabriel A. Shipley

Electrical and Computer Engineering ETDs

This dissertation presents analysis of experiments and simulations executed to develop the auto-magnetizing liner concept (AutoMag) for use as an alternative premagnetization mechanism for MagLIF. Tests of each stage of AutoMag (magnetization, dielectric breakdown, and implosion) were executed on the Mykonos accelerator and the Z accelerator. Experiments demonstrate strong peak axial magnetic field production (20 – 150 T), dielectric breakdown initiation that depends on global induced electric field across the target, and a level of cylindrical implosion uniformity high enough to be useful for prospective fusion-fuel-filled (auto-magnetized MagLIF) experiments.

This dissertation also presents detailed simulations of the Solid Liner Dynamic …

Effects Of Historical Land-Use Change On Surface Runoff And Flooding In The Amite River Basin, Louisiana, Usa Using Coupled 1d/2d Hec-Ras–Hec-Hms Hydrological Modeling, Alexandre G. H. Cowles

LSU Master's Theses

The Amite River Basin is a largely rural watershed spanning parts of four counties in southern Mississippi and seven parishes in southeast Louisiana, with basinwide imperviousness increasing from 0.82% in 1938 to 3.85% in 2016. The Basin has been the subject of significant research interest since catastrophic flooding in 2016 caused 13 deaths and widespread damages. Rapid development in recent decades has led to an expansion of impervious surfaces in Baton Rouge and surrounding areas, encroaching on floodplains and wetlands. At the basin scale, differences in flooding due to impervious cover changes were found to be somewhat limited, particularly along …

Lecture 00: Opening Remarks: 46th Spring Lecture Series, Tulin Kaman

Mathematical Sciences Spring Lecture Series

Opening remarks for the 46th Annual Mathematical Sciences Spring Lecture Series at the University of Arkansas, Fayetteville.

Improving Understanding Of Liquid Viscosity Through Experiments And Prediction, Jeremy W. Passey

Theses and Dissertations

Liquid viscosity is an important thermophysical property in process design. While liquid viscosity has been studied for over a century, much has been left unexplored. The behavior of liquid viscosity between the melting point and normal boiling point are well established, but yet there is a lack of experimental data – with only 52% of the compounds in the 801 DIPPR database having experimental liquid viscosity data – and inadequate prediction methods. This project was able to measure liquid viscosity for 30 organic compounds to help fill in the gap in the 801 DIPPR database. The measured results also helped …

Effect Of Ported Shroud Casing Treatment Modifications On Operational Range And Limits In A Centrifugal Compressor, Alexander A. Newell

Theses and Dissertations

The implementation of a ported shroud casing treatment is often used to extend the operating range of a centrifugal compressor. This work utilizes the STAR-CCM+ CFD package to analyze steady-state, single-passage simulations of a centrifugal compressor with and without a ported shroud to better understand how a ported shroud affects compressor flow physics. Verification and validation of simulations were conducted by comparison of results with a time-accurate full-annulus simulation and experimental data. Four different ported shroud revisions were considered and modeled along the full range of their stable operation, with emphasis placed on the flow limits of choke and stall. …

Micromechanisms Of Near-Yield Deformation In Bcc Tantalum, Joshua Jr-Syan Tsai

Theses and Dissertations

New materials, optimized for increased strength, ductility, and other desirable properties, have the potential to improve every aspect of modern living. To achieve these optimums, the necessary technological advancements are impeded mainly by the limits of available material models. Innovations in this field rely on research into the nature of material behavior. While a typical model of material behavior in the region near yield involves the initial linear elastic response, followed by yield and isotropic hardening, this fails to explain various important phenomena that manifest in a range of materials, such as pre-yield nonlinearity, anelasticity, yield point phenomena, hardening stagnation, …

Characterizing Bacterial Resistance And Microstructure-Related Properties Of Carbon-Infiltrated Carbon Nanotube Surface Coatings With Applications In Medical Devices, Stephanie Renee Morco

Theses and Dissertations

Carbon-infiltrated carbon nanotube (CICNT) forests are carbon nanotube (CNT) forests infiltrated with pyrolytic carbon to increase durability by becoming a solid material. This material can be tuned to maintain the nanotube geometry of a CNT forest and can also be fabricated on a variety of materials and geometries. Additionally, the present work has indicated that CICNT forests may resist bacterial proliferation and biofilm formation. This phenomenon is not due to the CICNT chemistry; it is presumably due to the CICNT nanostructure morphology. Thus, both silicon and stainless steel substrates were used to investigate CICNT's structural resistance to Methicillin-resistant Staphylococcus aureus …

Vlsi Implementation Of A Cost-Efficient Loeffler-Dct Algorithm With Recursive Cordic For Dct-Based Encoder, Rih-Lung Chung, Chen-Wei Chen, Chiung-An Chen, Patricia Angela R. Abu, Shih-Lun Chen

Department of Information Systems & Computer Science Faculty Publications

This paper presents a low-cost and high-quality; hardware-oriented; two-dimensional discrete cosine transform (2-D DCT) signal analyzer for image and video encoders. In order to reduce memory requirement and improve image quality; a novel Loeffler DCT based on a coordinate rotation digital computer (CORDIC) technique is proposed. In addition; the proposed algorithm is realized by a recursive CORDIC architecture instead of an unfolded CORDIC architecture with approximated scale factors. In the proposed design; a fully pipelined architecture is developed to efficiently increase operating frequency and throughput; and scale factors are implemented by using four hardware-sharing machines for complexity reduction. Thus; the …

The Exploration And Analysis Of Mancala From An Ai Perspective, Trevon J. Hunter

Honors Theses

Through the study of popular games such as Chess and Go, countless artificial intelligence (AI) research has been conducted in an attempt to create algorithms equipped for adversarial search problems. However, there are still a plethora of avenues that offer insight into further development. Mancala is traditionally a two-player board game that originated in the East and offers a unique opponent-based playing experience. This thesis not only attempts to create a competitive AI algorithm for mancala games by analyzing the performance of several different algorithms on this classic board game, but it also attempts to extract applications that may have …

Deploying And Analyzing Air Quality Sensors In Mongolian Gers, Lehi Sttenio Alcantara

Theses and Dissertations

The purpose of this research is to develop best practices for deploying air quality sensors in a remote location such as Mongolia. I discussed the architecture and design constraints when collecting remote air quality sensors data, the challenges that emerge while implementing a sensor-based network in a remote location such as Mongolia. The tradeoffs of using different architectures are described. I observed the usage of electrical heaters in modified gers in remote locations and conclude how effective they are in reducing PM2.5 levels by analyzing air quality data and go through the process of cleaning up the data and removing …

Discourse On Digital Government And Regulation: A Bibliometric Analysis, Prakoso Bhairawa Putera, Amelya Gustina

Library Philosophy and Practice (e-journal)

This study aims to discuss digital government and regulation, analyzed through the bibliometric approach with the Scopus database for the last 20 years and visualized through the VOSviewer software version 1.6.16. The results indicate that the topic of e-government has become essentially prominent and has been the most discussed in the past two decades. Approximately 41.1% of digital government and regulation articles are classified under the subject area of 'Computer Science', continued by Social Sciences (18.3%), and Business, Management and Accounting (10.2%), with the majority of being 'All Open Access' (46%). The trend of publication in this field includes the …

Crowd-Based Requirement Engineering, Ume Sauda Ghanyani

CBER Conference

Requirement elicitation through crowdsourcing is trending nowadays and due to its major benefits, some of the organizations are implementing this idea. Our research paper discusses the traditional requirement engineering concepts and then compares them with crowd-based requirement engineering to show the benefits of crowdsourcing. Features of Crowd-Based Requirements Engineering are highlighted to give an idea of the basis on which the survey was conducted. Furthermore, we have discussed the online survey and gamification methods to motivate the crowd.

Bibliometric Analysis And Research Trends Of A Journal: Magazine Of Civil Engineering, Daniel Aristizabal, Angy Juliet Lara, Valentina Payares, Alejandro Alzate

Library Philosophy and Practice (e-journal)

Magazine of Civil Engineering (MCE) is an open access scientific journal in the field of civil engineering and construction. Motivated by its more than a thousand articles published since 2008, this study aims to develop a bibliometric analysis based on the historical consolidation of publications and subject areas to identify research trends, authors, countries, and institutions with more publications. For this purpose, the Scopus database and the journal's homepage were consulted to identify the number of published issues and articles and other bibliometric indicators of interest, using open-source tools such as Bibliometrix and VOSviewer. The mapping of the scientific production …

A Bibliometric Survey On Antipodal Vivaldi Antenna, Sumit Kumar, Amruta S. Dixit

Library Philosophy and Practice (e-journal)

In this paper bibliometric survey is presented on Antipodal Vivaldi Antenna. The Antipodal Vivaldi Antenna is a broad band and has symmetric E plane and H plane. It has been used extensively in radars, wireless communication and dual polarization applications. The antipodal Vivaldi antenna has significant researches in biomedical imaging, optical lens, Ground-Penetrating Radar (GPR) System, detecting cancer, 5G communications etc. The bibliometric analysis is done for the reason to understand the reach of antipodal Vivaldi antenna and performance enhancement analysis worldwide. The Scopus and web of science are used for accomplishing this survey. The study focuses on 449 documents …

Introducing The Water Data Explorer Web Application And Python Library: Uniform Means For Data Discovery And Access From Cuahsi And The Wmo Whos Systems, Elkin Giovanni Romero Bustamante

Theses and Dissertations

There has been a growing recognition in recent years of the need for a standardized means for sharing water data on the web. One response to this need was the development of the Consortium of Universities for the Advancement of Hydrologic Science (CUAHSI) Hydrologic Information System (HIS) and its accompanying WaterOneFlow and WaterML protocols. To date, the primary means for accessing data shared using these protocols has been limited to the Microsoft Windows HydroDesktop software, the WaterML R package, and the web based CUAHSI HydroClient which serves as an access point to the CUAHSI HIS database. We recognized the need …

Managing Lake Urmia, Iran For Diverse Restoration Objectives: Moving Beyond A Uniform Target Lake Level, Somayeh Sima, David E. Rosenberg, Wayne A. Wurtsbaugh, Sarah E. Null, Karin M. Kettenring

Civil and Environmental Engineering Faculty Publications

There is widespread interest in restoring drying saline lakes. At Iran’s hypersaline Lake Urmia, managers have sought a uniform target lake level of 1274.1 m above sea level to lower salinity below 263 g L−1 and recover Artemia to sufficient densities to support flamingos. We suggest that addressing a broader range of objectives will allow more flexibility for managing the lake. We define eight restoration objectives to lower salinity, sustain Artemia and flamingo populations, separate islands from each other and the mainland, reduce lakebed dust, maintain commercially valuable ions, and improve recreational access from resort beaches. We use 40 years …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• Nordson BUILDS scholarship

Establishment Of Regional Phytoremediation Buffer Systems For Ecological Restoration In The Great Lakes Basin, Usa. I. Genotype X Environment Interactions, Ronald S. Zalesny, Andrej Pilipović, Elizabeth R. Rogers, Joel Gerard Burken, For Full List Of Authors, See Publisher's Website.

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Poplar remediation systems are ideal for reducing runoff, cleaning groundwater, and delivering ecosystem services to the North American Great Lakes and globally. We used phytorecurrent selection (PRS) to establish sixteen phytoremediation buffer systems (phyto buffers) (buffer groups: 2017 × 6; 2018 × 5; 2019 × 5) throughout the Lake Superior and Lake Michigan watersheds comprised of twelve PRS-selected clones each year. We tested for differences in genotypes, environments, and their interactions for health, height, diameter, and volume from ages one to four years. All trees had optimal health. Mean first-, second-, and third-year volume ranged from 71 ± 26 to …

Murray And Burwell Family Collection, 1870-1951, Special Collections, Leonard H. Axe Library

Finding Aids

A collection of correspondence, newspapers, photographs, and other writings related to the Murray-Burwell family in the early to mid-1900s.

David James Murray was born on October 19, 1873 in Pennsylvania and moved to Kansas when he was three years of age. In 1896 David married Mary Selvey (1878-1959) in Cherokee, Kansas. They would have five children. In 1902 their child Marguerite was born in Weir, Kansas. In Weir, David worked in the mines until 1930 when he transferred to the McNally plant in Pittsburg, Kansas. David passed away on December 12, 1943. Jack W. Burwell was born on July 25, …

Analysis Of Data To Evaluate The Performance Of Air Filters Used For Filtering Nanoscale Particles Generated By Smoke, Pascal J. Wagemaker

Honors College Theses

The main goal of this research project is to determine the effectiveness of commercially available air filters and to compare different kinds of commercially available air filters in certain categories. With recent record-breaking wildfires and the Covid-19 pandemic, research on the effects and features of nanoparticles has become increasingly important. Inhalation of nanoparticles in smoke can result in severe health effects on humans, affecting especially the respiratory system. As nanoparticles can pass through cell membranes, absorption occurs rapidly and affects many different parts and functions of the human body. While air filters are an effective method of reducing small-sized particles …

Geoglows Hydroviewer: Open Software-As-A-Service For Localizing Global Hydrologic Forecasts Of The Group On Earth Observations Global Water Sustainability Initiative, Kyler Ralph Ashby

Theses and Dissertations

Earth observation data is increasingly ubiquitous, easily accessible, freely available, and generally usable due to improvements in software, data standards, network infrastructure, and national policies. As a result, greater opportunities arise for using these data in a wider field of application including decision support for local and regional environmental and water resources management efforts. In parts of the world where in situ data are less readily available, global Earth observation data used in such decision support tools can be a boon to underfunded government and private water management agencies. The United Nations Group on Earth Observations Global Water Sustainability initiative …

Effects Of Carbon-Infiltrated Carbon Nanotube Growth On The Biocompatibility Of 316l Stainless Steel, Sterling Charles Voss

Theses and Dissertations

The purpose of this research is to identify the effects of the carbon-infiltrated carbon nanotube (CICNT) growth process on the material properties of 316L stainless steel, particularly those properties which are essential for biocompatibility. Physically altering the micro-topography of a surface can dramatically affect its capacity to support or prevent biofilm growth. Growing CICNTs on biomedical materials is one approach which has demonstrated success at preventing biofilm growth. Unfortunately, the high temperature and carbon-rich gas exposure required for this procedure has proven to have deleterious effects. Rusting has been observed on samples that have been coated with CICNTs and then …

A Review Of Fitness Tracker Game Elements And A Novel Game Approach For The Design Space, Aatish Neupane

Theses and Dissertations

Physical activities like walking have proven health benefits. People are adopting fitness trackers to track physical activity, but they often stop using them after a relatively short time. Many apps and games exist in the app markets that use gamification to tackle this problem of motivation. In this thesis, we examined these existing gamified fitness tracker apps from app markets and looked at the usage of different game elements within these apps. We conducted a systematic review of existing fitness Tracker Apps from Google Play Store and Apple App Store and used a mixed-method approach to identify apps, categorize them …

Metamaterials In 5g Antenna Designs: A Bibliometric Survey, Hema D. Raut, Laxmikant K. Shevada, Rajeshwari R. Malekar, Amruta S. Dixit, Sumit Kumar

Library Philosophy and Practice (e-journal)

The demand of high gain and wideband compact antenna designs are gaining importance to fulfil the need of 5G communication systems. This has opened the doors for the researchers to explore 5G antennas incorporating metamaterials as they can meet the requirement of high gain and wideband compact antennas. Overview of various metamaterial-based antenna designs including Electromagnetic Band Gap (EBG), artificial Magnetic Conductor (AMC), Frequency Selective Surface (FSS) and Partially Reflective Surface (PRS) are discussed in the paper. The paper primarily focuses on bibliometric survey of various types of 5G metamaterial antennas in terms of number of documents published, leading universities …

Laboratory Evaluation Of Geogrid-Reinforced Flexible Pavements, Mohammad Reza Sharbaf, Nader Ghafoori

Civil and Environmental Engineering and Construction Faculty Research

This study assessed the effectiveness of flexible pavements reinforced with two types of punched and drawn geogrids to reduce roadway base course thickness. Six laboratory tests were conducted using a steel cylindrical mold. Instrumentation included pressure cells placed at various locations of the test sections and a linear variable differential transformer which was placed on top of the loading system. A hydraulic actuator provided 40 kN (9 kips) cyclic load through a 305 mm (12 in) circular steel plate at a frequency of 0.77 Hz. Test results revealed that inclusion of both geogrid types in flexible pavement showed reductions in …