Engineering Commons^™

Mixed Mode Crack Propagation In Iliac Bone, E. Baesu, Dm. Iliescu, Bv. Radoiu, S. Halichidis

Department of Mechanical and Materials Engineering: Faculty Publications

Bone is a complex material that can be regarded as an anisotropic elastic composite material. The problem of crack propagation in hu- man bone is analyzed by using a generalization of the maximum tensile stress criterion (MTS). The results concern the critical stress for crack propagation and the direction of the crack path in Iliac bone.

Calibration Of Opensim Lifting Full-Body Model For Dynamic Simulations Of Patient-Handling Maneuvers, Barry Bait, Bridget Gagnier

20th Annual Celebration of Undergraduate Research and Creative Activity (2021)

Manual patient-handling tasks are associated with lower-back pain and injury. Computational musculoskeletal models may determine forces on the low back, trunk muscle activation during these tasks, and provide insight on how these may result in injury. There are no publicly available models for these tasks. To determine the appropriateness of the OpenSim Full-Body Lifting Model for these tasks, this project calibrated the model with biomechanical data of simulated maneuvers performed by a test subject. Thirty-nine reflective markers were placed bilaterally on bony prominences (forehead, back of head, clavicle, sternum, C7, T10, epicondyle of humerus, styloid process, metacarpal, anterior and posterior …

Shape Memory Alloy Deployable Device For Cubesat Satellite, Nicholas Loftis, Adam Lapointe

Thinking Matters Symposium

The purpose of this project was to design and create a release mechanism for a cubesat satellite with the use of shape memory alloys. The goal of the project was to design and create a lightweight, reliable, and simple release mechanism to deploy stowed solar arrays attached to the exterior of a Cubesat satellite. The design and creation of this mechanism is intended to further USM’s goal of creating and launching a Cubesat satellite into low orbit to expand the university into space exploration. The Cubesat project was created by the California Polytechnic State University and Stanford University’s Space Systems …

Husky Hand: A Low-Cost Electro-Mechanical Prosthetic Arm For The Underprivileged, Adam Robert

Thinking Matters Symposium

A continuation of a low-cost prosthetic upper limb prototype design which was investigated in EGN 301. The prosthetic is specifically designed for the needs and requirements of under privileged individuals in the Dominican Republic with upper limb amputations. The project focuses on the creation of an open-source computer aided prosthetic hand/arm model. The design allows consumer-grade fused filament fabrication (FFF) 3-D printers to be used. The improved design allows for the integration of the PQ-12 linear actuator for grasp and finger control. This simplifies the assembly, while, also reducing the size and mass of the whole unit. Producing a low-cost …

Finite Element Analysis Of Impact Resistant Composites Inspired By Peacock Mantis Shrimp, Nandati Shrestha

Thinking Matters Symposium

The fist-like club of the peacock mantis shrimp, a 5-inch marine crustacean, can strike its prey with speed faster than a .22-caliber bullet with an impact force more than 1,000 times its own weight. Although these creatures punch so fast that it even boils the water, they don’t take any damage. This incredible insusceptibility is due to the arrangement of mineralized fiber layers in which each fibrous layer is laid at a slightly rotated angle to form a helicoidal structure that acts as a shock absorber for the club. The goal is to perform a finite element analysis to investigate …

Investigating The Heat Release From A Single-Cylinder Diesel Engine, Sarah Payne, Scott Eaton Phd

Thinking Matters Symposium

This project develops a dynamic measuring processes and filtering technique to acquire accurate engine thermodynamic data using LabVIEW. A single-cylinder Kohler diesel engine (model KD440) is instrumented with an in-cylinder pressure monitoring transducer to obtain cylinder pressure and volume data as a function of crank angle position. From this data, several calculations will be made using thermal analysis to understand the engine's performance. An additional objective of the project is to increase the efficiency of the engine's air intake system by modifying the current configuration. We show that the monitoring software accurately measures real-time engine efficiency and combustion dynamics enabling …

App Development For Wearable Sensors, Connor Pittman, Christopher Chappie, Patrick A. Tetreault

Thinking Matters Symposium

The objective of this research project was to create a wearable device that monitors bodily functions for the user to view on their smartphone. Sensor data is processed using the Arduino Nano 33 BLE microcontroller. The sensors used in this project include: proximity, temperature, humidity, heart rate, pressure, and skin impedance. This project takes advantage of the Arduino's Bluetooth low energy (BLE) capabilities so that all the data can be transmitted to a smartphone. This presentation shows the challenges faced during the project and how they were overcome. Some of these challenges include: programming, how heart rate sensors work, and …

Mems Directional Acoustic Sensors, Colby Damren

Thinking Matters Symposium

The purpose of my project is to test and verify two Micro-Electro-Mechanical-System (MEMS) microphones. The two MEMS devices are biomimetic microphones that imitate the eardrums of the Ormia Ochracea, a parasitic fly that listens for host crickets to lay their eggs. The MEMS microphones mimic the eardrum spacing of the Ormia Ochracea with a spacing of 1000um. This is roughly twice the opening of the Ormia Ochracea. The microphones will be tested for directionality inside a wooden box. This box will be lined with beveled foam to prevent any echo or outside noise from interfering with the results. These results …

Nitinol Robotic Arm, Brandon Cousino, Connor Sweatt

Thinking Matters Symposium

The goal of our project is to create a remotely controlled robotic arm using a nickel-titanium alloy (Nitinol) that exhibits “shape memory” tendencies and a 9-lumen tube. The arm must be able to move in all for directions (forward, left, right, backwards) with the control of a joystick and return to an upright position upon halting user input (thus requiring a two-way shape memory ability). The final product must operate without any unwanted twisting of the arm, crosstalk between the different nitinol wires due to heating, and be easily manufacturable. Easy replacement of the arm from the main mechanism is …

Design, Simulation And Testing Of Biomimetic Directional Acoustic Sensors, Brendan Francis

Thinking Matters Symposium

The Ormia ochracea, a species of parasitic fly, has become the focal point in sound localization research because of its finely tuned hearing abilities. The female of this species uses its super highly directional hearing to pinpoint the call of a host cricket, with hypersensitivity of frequency and phase difference, to reach and dispose of its eggs on the host. The goal of this study was to further the research of a previous Project in Professor Guvench’s group which implemented MEMS (Micro Electro-Mechanical System) technology on a chip to replicate these abilities. In this iteration, however, some commercially available …

Design Of A Constant Volume Combustion Chamber, John Bono, Collin Gould, Scott Eaton

Thinking Matters Symposium

This project designs a high-temperature, high-pressure fuel injection chamber for the visualization of diesel fuel injection spray patterns. The study and characterization of diesel fuel spray is important for the development of new engine designs and adoption of alternative fuels. In addition, the chamber can be used to support teaching research projects at the University of Southern Maine. A 3-D SolidWorks model is developed to meet visual accessibility and operating temperature and pressure requirements. Three experimental imaging techniques will be compared, with an emphasis on schlieren photography and videography. Data acquisition and controls systems will be developed including digital imaging …

Sedan Performance/Economy Rear Diffuser, Jacob Boucher Koris

Thinking Matters Symposium

This project consists of designing in SolidWorks a model of the performance/fuel economy diffuser. The design is modeled with an Ahmed body (recommended shape for CFD testing vehicles) and the diffuser will be applied to the bottom of the rear bumper of the car. After this is done the model will be imported into ANSYS for CFD testing. Testing entails importing the model, then creating a mesh around the model, and then setting up the program to run analysis for calculating the coefficient of drag. Then building this SolidWorks model as a full working prototype for actual road-testing purposes. With …

A Critical Review On The Development Of Ionic Liquids-Based Nanofluids As Heat Transfer Fluids For Solar Thermal Energy, Titan C. Paul, Amitav Tikadar, Rajib Mahamud, Azzam S. Salman, A.K.M. Monjur Morshed, Jamil A. Khan

Faculty Publications

In recent years, solar thermal energy (STE) has attracted energy researchers because of its higher efficacy compared to the photovoltaic solar cell. STE is one of the forms of solar energy whereby heat is transferred via a secondary medium called heat transfer fluids (HTFs). Therefore, the overall performance of STE depends on the thermophysical properties and thermal performance of the HTFs. Traditional HTFs suffer from low decomposition temperature, high melting point, and higher vapor pressure. To overcome these limitations, researchers have recently begun working on new HTFs for STE. Ionic liquids (ILs) are considered as a potential candidate for the …

Supplying Space: 3d Printing For Interplanetary Logistics, Jeffrey W. Rogers

Space Studies Student Publications

This case study examines 3-D printing as an effective solution to ensure just in time logistics capability for supporting a crewed colony on Mars. It explores the cost to weight benefits of an advanced shipment sent prior to the crewed mission to ensure on-planet production capacity on arrival and landing for sustained operations with limited resupply from Earth. In order to project a realistic and financially reasonable solution, a quantitative descriptive analysis method is utilized. Data was collected through text research and research tools provided from the United States Government (NASA) and private industry via internet sources. From correlated data, …

Communication Aware Uav Swarm Surveillance Based On Hierarchical Architecture, Chengtao Xu, Kai Zhang, Yushan Jiang, Shuteng Niu, Thomas Yang, Houbing Song

Publications

Multi-agent unmanned aerial vehicle (UAV) teaming becomes an essential part in science mission, modern warfare surveillance, and disaster rescuing. This paper proposes a decentralized UAV swarm persistent monitoring strategy in realizing continuous sensing coverage and network service. A two-layer (high altitude and low altitude) UAV teaming hierarchical structure is adopted in realizing the accurate object tracking in the area of interest (AOI). By introducing the UAV communication channel model in its path planning, both centralized and decentralized control schemes would be evaluated in the waypoint tracking simulation. The UAV swarm network service and object tracking are measured by metrics of …

Senior Design Capstone: Using An Engineering Design Process To Create A Sawzall Wobble Fixture For Milwaukee Tools, Tyler Moore

Honors Theses

The overall objective of this design project was to successfully design a fixture to expedite the repairs of Sawzalls at the Milwaukee Tools repairs facility in Greenwood, Mississippi. This project was executed in accordance with guidelines set forth by the Senior Capstone Design class at the University of Mississippi as well as the quality engineers sponsoring the project at Milwaukee Tools. The fixture was created utilizing an engineering design process with the goal of allowing technicians to press two Sawzall wobbles onto an angled Sawzall wobble shaft using an arbor press with just one press. By beginning with a straightforward …

Analyzing The Lifecycle Of A Modular Cutting Board From Design To Production, Caitlin O'Connor, Achintya Prasad

Honors Theses

This Capstone project is intended to demonstrate the process of product development for a modular cutting board from design to production by applying manufacturing principles, utilizing the stage-gate format, and developing a marketing plan. The guiding principles for the project would be the implementation of lean manufacturing and analyzing the quality, performance, lifecycle cost, and time needed for market introduction. Team voting and assignment occurred in Manufacturing 451 in Fall 2020, and the project was completed during Spring 2021. Teams were required to meet outside of class time in order to discuss ideas and build designs. Lab times were scheduled …

Going Green: A Comparative Analysis Of Green Urbanism In Paris And Shanghai, Jeanne Torp

Honors Theses

As climate change becomes more pressing with each day and as we scramble to slow down the challenges it poses, adapting the means of operation within our cities will become an invaluable tool for reducing humanity’s carbon footprint. This paper seeks to study the ways in which green infrastructure in global cities can be used to do just that—adapting to and mitigating the effects of challenges resulting from climate change. In order to provide a broad overview of the effectiveness of such green infrastructure systems across the globe, this research will focus on two cities that vary greatly in their …

Computational Study On Suppression Of Airfoil Flow Separation Using High-Frequency Translational Surface Actuation, Bibek Gupta

Honors Theses

Flow separation is a phenomenon that occurs when pressure increases in the streamwise direction of a flow, making a distinctive boundary layer or separation bubble. It causes aircraft to experience an increase in drag and noise and a decrease in a lift, hence degrading their aviation performance. This study uses numerical simulations to understand better the effects of high-frequency translational surface actuation (HFTSA) on flow separation control. The numerical simulations mimic the experimental parameters of an experiment performed by Okoye et al. on using the HFTSA system to control flow separation. A symmetrical airfoil structure of chord length of 0.3 …

Bibliometric Analysis Of Emerging Technologies In The Field Of Computer Science Helping In Ovarian Cancer Research, Sonali Kothari Dr., Anvita Gupta, Muskaan Agrawal Agrawal, Kajal Jaggi, Adhiraj Dev Goswami, Ketan Kotecha, M. Karthikeyan Dr., Vijayshri Khedkar

Library Philosophy and Practice (e-journal)

This study is carried out to provide an analysis of the literature available at the intersection of ovarian cancer and computing. A comprehensive search was conducted using Scopus database for English-language peer-reviewed articles. The study administers chronological, domain clustering and text analysis of the articles under consideration to provide high-level concept map composed of specific words and the connections between them.

U.S. Potential Of Sustainable Backyard Distributed Animal And Plant Protein Production During And After Pandemics, Theresa K. Meyer, Alexis Pascaris, David Denkenberger, Joshua M. Pearce

Michigan Tech Publications, Part 1

To safeguard against meat supply shortages during pandemics or other catastrophes, this study analyzed the potential to provide the average household’s entire protein consumption using either soybean production or distributed meat production at the household level in the U.S. with: (1) pasture-fed rabbits, (2) pellet and hay-fed rabbits, or (3) pellet-fed chickens. Only using the average backyard resources, soybean cultivation can provide 80-160% of household protein and 0- 50% of a household’s protein needs can be provided by pasture-fed rabbits using only the yard grass as feed. If external supplementation of feed is available, raising 52 chickens while also harvesting …

Design, Analysis, And Optimization Of A Process To Produce Dimethyl Ether From Methanol, Thomas Mathwig

Honors Theses

The company that the engineering team works for is facing a contract loss with one of its customers of methanol. To avoid economic losses, a process has been proposed for converting the unused methanol to dimethyl ether (DME) through a dehydration reaction. After a preliminary simulation of the base case and optimization of the distillation column, an Equivalent Annual Operating Cost (EAOC) of $140,000 was calculated for the column. The EAOC was the sum of the annualized capital investment and the annual operating cost. Determining the process to be worth pursuing, a Toller was brought in to provide rental equipment …

Sizing And Economics Of Solar Powered Indoor Swimming Pool, Aman Bhatta

Honors Theses

With increasing global population and aspiration for higher standards for living, there is a rapid increase in demand for energy. With the concerns of climate change becoming ever more pressing, a shift from the conventional energy source to an alternative green version to meet the energy demand could be of significant interest. A large amount of energy is required to maintain water temperature in the swimming pool at a human comfort temperature. Several studies have been performed to calculate and evaluate the feasibility of powering thermal systems for swimming pools using solar energy. Still, extensive analysis using solar thermal energy …

Parametric Design Of Flywheel For An Electric Punch Press, Prashant Dhakal

Honors Theses

Almost all designs start with a design requirement. These may be weight, volume, clearance, and even custom calculations. Finding a solution that meets these requirements often involves tedious and time-consuming iterations. Once the solution has been found, the design must be optimized to find the best possible solution. Finding the ‘best possible design’ requires substantial time and effort dedicated to iterating and analyzing the potential model solutions. This is where Parametric design comes into play. The Parametric design aids in specifying the key parameters of the design and makes changes interactively, with the model updating automatically. The purpose of this …

Low-Fidelity Method For Rapid Aerostructural Optimisation And Design-Space Exploration Of Planar Wings, Jeffrey D. Taylor, Doug F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

During early phases of wing design, analytic and low-fidelity methods are often used to identify promising design concepts. In many cases, solutions obtained using these methods provide intuition about the design space that is not easily obtained using higher-fidelity methods. This is especially true for aerostructural design. However, many analytic and low-fidelity aerostructural solutions are limited in application to wings with specific planforms and weight distributions. Here, a numerical method for minimising induced drag with structural constraints is presented that uses approximations that apply to unswept planar wings with arbitrary planforms and weight distributions. The method is applied to the …

Co2-Wettability Reversal Of Cap-Rock By Alumina Nanofluid: Implications For Co2 Geo-Storage, Muhammad Ali, Adnan Aftab, Faisal Ur Rahman Awan, Hamed Akhondzadeh, Alireza Keshavarz, Ali Saeedi, Stefan Iglauer, Mohammad Sarmadivaleh

Research outputs 2014 to 2021

The usage of nanofluids is vast in different applications of nano-energy. These minute nanoparticles can be used to alter the hydrophobicity into hydrophilicity for CO2-brine-mineral systems in the presence of organic acids. Nonetheless, the literature lacks the information for the behavior of nanoparticles and its associated concentrations in the presence of organic acids at the reservoir (high temperature and high pressure) conditions. In this study, we have investigated that how different alkyl chain organic acids impact the wettability of mica muscovite for different ageing times (7 days and one year) and how this impact can be reversed by nanofluid priming …

Bibliometric Analysis On Hand Gesture Controlled Robot, Karthik Bankapur, Himmat Singh, Akshit Gupta, Hritik Mathur, Harikrishnan R, Shivali Amit Wagle

Library Philosophy and Practice (e-journal)

This paper discusses about the survey and bibliometric analysis of hand gesture-controlled robot using Scopus database in analyzing the research by area, influential authors, countries, institutions, and funding agencies. The 293 documents are extracted from the year 2016 till 6^th March 2021 from the database. Bibliometric analysis is the statistical analysis of the research published as articles, conference papers, and reviews, which helps in understanding the impact of publication in the research domain globally. The visualization analysis is done with open-source tools namely GPS Visualizer, Gephi, VOS viewer, and ScienceScape. The visualization aids in a quick and clear understanding …

2021- The Twenty-Fifth Annual Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Twenty-fifth Annual Symposium of Student Scholars, held on April 29, 2021. Includes abstracts from the presentations and posters.

Application Of Eh-Ph Diagrams On Acid Leaching Systems For The Recovery Of Rees From Bastnaesite, Monazite And Xenotime, Peijia Lin, Xinbo Yang, Joshua M. Werner, Rick Q. Honaker

Mining Engineering Faculty Publications

Bastnaesite, monazite and xenotime are rare earth minerals (REMs) that are typical sources for rare earth elements (REEs). To advance the understanding of their leaching and precipitation behavior in different hydrometallurgical processes, Eh-pH diagrams were constructed and modified using the HSC 9.9 software. The aqueous stability of rare earth elements in H₂O and acid leaching systems, i.e., the REE-Ligands-H₂O systems, were depicted and studied based on the Eh-pH diagrams. This study considers the most relevant lixiviants, their resulting equilibrium states and the importance in the hydrometallurgical recovery of rare earth elements (REMs). A literature review was …

Carbon Nanotori Structures For Thermal Transport Applications On Lubricants, Jaime Taha-Tijerina, Karla Aviña, Juan Manuel Martínez, Patsy Yessenia Arquieta-Guillén, Marlon González-Escobedo

Manufacturing & Industrial Engineering Faculty Publications

Carbon nanostructures have been recently applied to improve industrial manufacturing processes and other materials; such is the case for lubricants used in the metal-mechanic industry. Nanotori are toroidal carbon nanostructures, obtained from chemical treatment of multi-wall carbon nanotubes (MWCNTs). This material has been shown to have superb anti-wear and friction reduction performance, having the ability to homogeneously disperse within water in concentrations between 1-2 wt.%. Obtained results of these novel nanostructures under water mixtures and novel additives were a set point to our studies in different industrial lubricants. In the present work, nanotori structures have been applied in various filler …