Engineering Commons^™

Virtual Training System For Spacecraft Maintenance Based On Desktop Virtual Reality, Shisong Wei, Zhengdong Zhou, Xuling Zhang, Mao Ling, Junshan Jia, Chuanle Liu

Journal of System Simulation

Abstract: In order to shorten the training period of aerospace maintenance personnel and improve their operation proficiency, a spacecraft maintenance simulation system based on the desktop virtual reality technology is designed and developed. It is superior to the head-mounted display, which is bulky, isolated from the real world, easy to make users dizzy and hard to be shared. The assembly management scheme based on XMind and SqlServer database is proposed to realize the visualization of assembly rule editing, which makes assembly and disassembly flexible and convenient.

Technical Characteristics Of Digital Twins And Application Prospects In The Field Of Flight Testing, Liu Yu, Xie Qiang

Journal of System Simulation

Abstract: For the application of digital twins in flight tests, the connotation and technical characteristics of digital twins were studied and analyzed. Six flight test digital twins typical application scenarios, such as the requirements development and overall planning of flight test, the flight test mission designing, the integrated testing and modification of flight test, the flight test organization and implementation, the fast maintenance and support and the training of flight test engineers have been designed by mapping the behavior and performance of flight test objects. The synchronize updates, parallel validation and spiral evolution were achieved between the digital models …

Research On The Offset Of Elliptical Quiet Zone In Catr Of Multiple Feed, Liu Yong, Liwei Guo, Wangyang Song, Jiang Xing, Simin Li, Peng Lin

Journal of System Simulation

Abstract: Electromagnetic target simulator based on CATR of the quiet zone movement,which adopt the multi-feed source CATR RF signal feeding by reflecting to get the quiet zone movement of simulated far field. It can be used in simulation of seekers in a multi-target mobile environment. The phase of the feeds of the 1×4 horn array is changed to realize the movement of the quiet zone in the CATR. The phase consistency of the millimeter wave quiet zone of the target simulation system determines the target simulation accuracy. The amplitude and phase characteristics of the array feeding with different beam …

Energy Management Of Marine Current Power Generation System Based On Fuzzy Logical Control, Jingang Han, Li Xu

Journal of System Simulation

Abstract: The fluctuation of marine current velocity leads to the fluctuation of power generation. The hybrid energy storage system composed of vanadium redox flow battery and super capacitor is used to improve the power quality and smooth the marine current power generation. With the research and commercialization of large scale power marine current power generation system, the capacity of energy storage system has been increasing. To reduce the rated capacity of super capacitor banks in energy storage system, an energy management strategy based on low-pass filter optimization algorithm of fuzzy control is proposed and the simulation model of 3 MW …

Development Of Semi-Physical Simulation Platform For Monitoring Municipal Solid Waste Incineration Process, Aijun Yan, Xia Heng, Xizhi Liu

Journal of System Simulation

Abstract: In order to research and test the modeling, control and optimization of MSW (Municipal Solid Waste) incineration process, a semi-physical simulation platform with three-layer structure by combining the physical control system with the virtual object is developed. The physical control system of the platform is composed of an intelligent control optimization layer and basic control layer; and the virtual object layer includes simulated instrument, actuator and incineration process model. The software for man-machine interface with OPC (Object Linking and Embedding (OLE) for Process Control), equipment/parameter monitoring, and incineration process model are developed. The functions of intelligent control optimization layer …

Development Paths Of New Energy Vehicles Incorporating Co2 Emissions Trading Scheme, Wenxiang Li, Li Ye, Jieshuang Dong, Yiming Li

Journal of System Simulation

Abstract: New energy vehicles in China have entered the “post-subsidy era”, and it is urgent to explore and establish a long-term mechanism for market-oriented development. The CO₂ emission trading scheme for road transport (ETS-RT) is introduced to replace financial subsidies, forming a market-oriented incentive and punishment mechanism. Therefore, a market mechanism is established where internal combustion engine vehicles feed new energy vehicles. A causal loop diagram of system dynamics was used to analyze the key policy parameters of the ETS-RT that affect the development of new energy vehicles. Then a multi-agents-based model of ETS-RT is established to simulate the …

Review On Key Technologies Of Industrial Control System Security Simulation, Bailing Wang, Hongri Liu, Yaofang Zhang, Sicai Lü, Zibo Wang, Qimeng Wang

Journal of System Simulation

Abstract: In order to cope with the increasingly serious industrial internet security problems, simulation is viewed as a critical backboned technology for drilling of network attack and defense, tracking back and analyzing of security incidents, as well as validating of pre-research technology. On the basis of summarizing the studies of three types of typical industrial control system security simulation platform, the key technologies used in industrial control cyber range and industrial control honeynets are highlighted. Technologies are summarized, such as the virtualization technology of industrial control network and industrial control components, the construction technology of industrial control target field dominated …

Investigation Of Variable Switching Frequency In Finite Control Set Model Predictive Control On Grid-Connected Inverters, Luocheng Wang, Tiefu Zhao, Jiangbiao He

Electrical and Computer Engineering Faculty Publications

Finite control set model predictive control (FCS-MPC) has been widely studied and applied to the power converters and motor drives. It provides the power electronics system with fast dynamic response, nonlinear system formulation, and flexible objectives and constraints integration. However, its variable switching frequency feature also induces severe concerns on the power loss, the thermal profile, and the filter design. Stemming from these concerns, this article investigates the variable switching frequency characteristics of FCS-MPC on the grid-connected inverters. An intuitive relationship between the switching frequency and the magnitude of the converter output voltage is proposed through the geometry analysis, where …

Enhancing A Building Information Model For An Existing Building With Data From A Sustainable Facility Management Database, Ryan Loeh, Jess Everett, William Riddell, Douglas Cleary

Henry M. Rowan College of Engineering Departmental Research

This study investigates the feasibility and benefits of transferring data between Autodesk Revit (used for building information modeling (BIM)) and BUILDER SMS (used for sustainable facility management (SFM)). Two data transfer methods were evaluated using a case study; one involved entirely manual data transfer, the other a combination of manual and automatic. Of the data transfer methods evaluated, the manual/automated hybrid was determined to be the best option, especially when regular updates are envisioned. The case study produced an enhanced BIM model that can be used to support sustainable facility management, called here an SFM-enhanced BIM model. An integration workflow …

Effects Of Stiffness And Cell Shape On Cellular Mechanosensing, Sarah Lynn Furman

Theses and Dissertations

Cellular mechanosensing is the process of converting mechanical signals into biological responses. Stem cells are self-renewing cells with the potential to transform into specialized cell types - this differentiation process is influenced by cellular mechanosensing. Cells sense material stiffness, and stiffer environments result in increased cellular mechanosensing and preferential differentiation into bone-producing osteoblasts. Cell shape also plays an important role due to its influence on cytoskeletal contractility, and photopatterning can be used to study the effects of cell shape on cellular mechanosensing. Although the effects of material stiffness and cell shape have been studied, little is known about the joint …

Modeling, Control And Analysis Of Inverter-Based Generators In The Power Grids, Yangkun Xu

USF Tampa Graduate Theses and Dissertations

Nowadays, the inverter-based generators (IBGs) has been exponentially integrated into the power grid due to environment and energy saving concerns. However, the high penetration of low inertia IBGs brings new problems on the system stability. The main objectives of this dissertation are to: 1- carry out large-signal analysis to identify the stability issues and small-signal analysis to assess the stability of the power systems, and 2- provide a standard measuring procedure to identify the admittance of IBGs. In addition, investigation on a novel DC-based IBGs architecture is carried out. In this dissertation, one widely used IBG is investigated: Type-4 wind …

Universal Biological Motions For Educational Robot Theatre And Games, Rajesh Venkatachalapathy, Martin Zwick, Adam Slowik, Kai Brooks, Mikhail Mayers, Roman Minko, Tyler Hull, Bliss Brass, Marek Perkowski

Complex Systems Faculty Publications and Presentations

Paper presents a concept that is new to robotics education and social robotics. It is based on theatrical games, in motions for social robots and animatronic robots. Presented here motion model is based on Drift Differential Model from biology and Fokker-Planck equations. This model is used in various areas of science to describe many types of motion. The model was successfully verified on various simulated mobile robots and a motion game of three robots called "Mouse and Cheese."

Estimation Of Able-Bodied Humans Elbow Joint Actions Using Semg And Ann-Based Softmax Classifier, Abdullah Al-Maliki

Theses and Dissertations

The upper limb is a complex part of the human body, and it is necessary to carry on daily tasks and maintain self-dependence. As a result, the daily life of people with upper limb amputation could not be as easy or as free as the more fortunate people without amputation. This work focuses on estimating the upper limb’s angular displacement, speed, acceleration, and torque at the elbow joint, it does so regardless of arm’s orientation and effort level. We do so to enable better control of the myoelectric prosthesis. This work complements the related existing literature, which usually does not …

Data-Informed Decision Support To Improve Pediatric And Maternal Care Quality Under Medicaid Managed Care Settings, Hasan Symum

USF Tampa Graduate Theses and Dissertations

Over the last two decades, the United States has spent almost twice as much per person in healthcare compared to most other wealthy countries. However, this higher spending has not necessarily transformed into improved quality of care; According to World Health Organization reports, the US now ranks 39th for child health and wellbeing and worst in maternal care among developed nations. In terms of proportion of preventable hospital visits, low-risk cesarean sections, and avoidable maternal morbidity/death, the U.S. is among the highest compared with the peer nations. The prevalence of these adverse outcomes in pediatric and obstetric care is particularly …

The Effect Of Room-Temperature Aging On Enthalpy And Dielectric Property Of Carbon-Fiber/Epoxy Composite Prepreg And The Mechanical Property Of Manufactured Composite, Monjur Morshed Rabby, Minhazur Rahman, Partha Pratim Das, Muthu Ram Prabhu Elenchezhian, Relebohile George Qhobosheane, Vamsee Vadlamudi

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

Fiber-based reinforced plastics are widely used materials in different industries - e.g., Automotive, Aerospace, Defense- because of their various advantages. The most reliable raw materials for manufacturing fiber-based composites are pre-impregnated reinforcing fiber (prepreg). However, the limitation of using prepreg lies in its instability at room temperature. Prepregs have a specific out-life which sometimes makes the manufacturing process difficult. The objective of this study is to find out a way to investigate the room temperature aging effect on prepreg by analyzing the enthalpy and dielectric properties. In this study, differential scanning calorimetry (DSC) was used to measure the reaction enthalpy …

Multi-Sensor Data Collection And Fusion Using Autoencoders In Condition Evaluation Of Concrete Bridge Decks, Sepehr Pashoutani, Jinying Zhu, Chungwook Sim, Kwanghee Won, Brian A. Mazzeo, W Spencer Guthrie

Department of Civil and Environmental Engineering: Faculty Publications

This paper presents a multi-sensor data collection and data fusion procedure for nondestructive evaluation/testing (NDE/NDT) of a concrete bridge deck. Three NDE technologies, vertical electrical impedance (VEI), ground-penetrating radar (GPR), and high-definition imaging (HDI) for surface crack detection, were deployed on the bridge deck. A neural network autoencoder was trained to quantify the relationship between VEI and GPR results using the data collected at common positions. This relationship was then used for fusion of VEI and GPR data to increase the reliability and spatial resolution of the NDE measurements and to generate a data-fused condition map that showed novel characteristics. …

Role Of Lithium Doping In P2-Na0.67Ni0.33Mn0.67O2 For Sodium-Ion Batteries, Yingying Xie, Eric Gabriel, Haoyu Zhu, Julie Pipkin, Malia Dustin, Hui Xiong

Materials Science and Engineering Faculty Publications and Presentations

P2-structured Na_0.67Ni_0.33Mn_0.67O₂ (PNNMO) is a promising Na-ion battery cathode material, but its rapid capacity decay during cycling remains a hurdle. Li doping in layered transition-metal oxide (TMO) cathode materials is known to enhance their electrochemical properties. Nevertheless, the influence of Li at different locations in the structure has not been investigated. Here, the crystallographic role and electrochemical impact of lithium on different sites in PNNMO is investigated in Li_xNa_0.67–yNi_0.33Mn_0.67O_2+δ (0.00 ≤ x ≤ 0.2, y = 0, 0.1). Lithium occupancy on prismatic Na …

An Open Web-Based Module Developed To Advance Data-Driven Hydrologic Process Learning, Belize A. Lane, Irene Garousi-Nejad, Melissa A. Gallagher, David G. Tarboton, Emad Habib

Civil and Environmental Engineering Faculty Publications

The era of ‘big data’ promises to provide new hydrologic insights, and open web-based platforms are being developed and adopted by the hydrologic science community to harness these datasets and data services. This shift accompanies advances in hydrology education and the growth of web-based hydrology learning modules, but their capacity to utilize emerging open platforms and data services to enhance student learning through data-driven activities remains largely untapped. Given that generic equations may not easily translate into local or regional solutions, teaching students to explore how well models or equations work in particular settings or to answer specific problems using …

Towards Semantic Integration Of Machine Vision Systems To Aid Manufacturing Event Understanding, Kaishu Xia, Clint Saidy, Max Kirkpatrick, Noble Anumbe, Amit Sheth, Ramy Harik

Publications

A manufacturing paradigm shift from conventional control pyramids to decentralized, service-oriented, and cyber-physical systems (CPSs) is taking place in today’s 4th industrial revolution. Generally accepted roles and implementation recipes of cyber systems are expected to be standardized in the future of manufacturing industry. The authors intend to develop a novel CPS-enabled control architecture that accommodates: (1) intelligent information systems involving domain knowledge, empirical model, and simulation; (2) fast and secured industrial communication networks; (3) cognitive automation by rapid signal analytics and machine learning (ML) based feature extraction; (4) interoperability between machine and human. Semantic integration of process indicators is fundamental …

Agile And Lean Six Sigma Integration: A Leadership Framework, Alessandro Laureani

International Conference on Lean Six Sigma

Submitting final version of the paper attached.

Agile and Lean Six Sigma integration: a Leadership framework

Author: Alessandro Laureani, Independent Lean Six Sigma Scholar, Ireland

E-mail: [email protected] Phone: +353 87 914 4532

Purpose

The purpose of this paper is to illustrate how Agile methodologies and Lean Six Sigma can coexist and propose a Leadership framework to successfully merge Agile methodologies with Lean Six Sigma practice.

Design/methodology/approach

The paper builds on the author’s doctoral thesis on Leadership for Lean Six Sigma, and integrate Agile practices based on the author’s experience in the software development industry.

Findings

Agile methodologies, that came to …

Lss Implementation In Micro Enterprises: Adoption Of Tools To Support Competitiveness, Seamus O'Reilly, Dermot Freeman, Lawrence Dooley

International Conference on Lean Six Sigma

LSS Implementation in Micro Enterprises:

Adoption of tools to support competitiveness

Seamus O’Reilly^a ([email protected]), Dermot Freeman^b ([email protected])

and Lawrence Dooley^a ([email protected])

^aCork University Business School, Ireland. ^bDermot Freeman & Associates, Ireland

Purpose

This study seeks to contribute to an emerging literature addressing Lean Six Sigma (LSS) implementation in the micro enterprise context. Specifically, it explores what LSS tools address business opportunities and challenges identified by micro enterprises.

Methodology

This study adopts a purposive sampling approach. Thirty micro enterprise who had availed of a lean start programme launched by a …

Replicating Lean Six Sigma Green Belt Education, Martinus J. Buijvoets, Bob Walrave, Jukka-Matti Turtiainen, Gregory H. Watson

International Conference on Lean Six Sigma

Purpose – This paper describes the intricates and possibilities of replicating a Lean Six Sigma Green Belt (LSSGB) education model from a pilot program to other universities—employing ‘replication as strategy’—based on a validated ‘business model.’

Study design/methodology/approach – This work is grounded in a case study on the ESTIEM LSSGB educational method and draws on the replication literature. Specifically: (1) replication as strategy (Winter and Szulanski, 2001) to replicate stimulating learning environments, and (2) replicating sets of teaching practices (Baden-Fuller and Winter, 2007). These theories are practiced using data obtained from various sources: Participant-observer data, interview data, and secondary case …

Six Sigma, Sustainability, And It Management: A Research Review And Discussion Of Future Directions, Manal Alduraibi, Timothy Winders, Chad Laux

International Conference on Lean Six Sigma

Abstract

Purpose- Six Sigma is based upon quality improvement by finding the root cause and refining processes to the precision of process outcomes. The purpose of this research was to conduct a systematic literature review (SLR) to explore the Six Sigma techniques and information technology (IT) management concepts to identify the IT management principle's impact on the sustainability of Six Sigma project efforts and identify the gaps that are essential to be addressed through further research. This research also discusses the principles of IT management upon the influence on Six Sigma projects, and subsequent contribution to organizational economic sustainability. An …

Rattle Detection – An Automotive Case Study, Orla Hartley

International Conference on Lean Six Sigma

This case study showcases the use of statistical tools to develop an objective Squeak and Rattle (S&R) measurement and detection test for End Of Line (EOL) sign off in an automotive manufacturing environment. Audio Induced S&R is an unwanted vibration within the vehicle caused by the sound system, impacting on customer perception of vehicle quality. Testing for S&R in an automotive environment has a key challenge; how to robustly detect a rattle at the EOL and thus prevent plant escapes to the customer. The objective test developed used microphones and analysers in order to replace an e subjective listening test. …

The Application Of Measures Of Lean Production For Services, Willem Salentijn, Jiju Antony, Chad Laux

International Conference on Lean Six Sigma

This paper gives insights on how to measure the degree of lean for services and explores existing instruments, proposing adaptions on an existing instrument, developed for production.

Sustaining Continuous Improvement In Public Sector Services Through Double Loop Learning, Chris Buckell Msc, Mairi Macintyre Assoc. Prof.

International Conference on Lean Six Sigma

Abstract

Purpose: Public Service Organisations (PSOs) are facing continuing funding challenges and increased pressure to maintain and improve service delivery with fewer resources. One response, with the promise of improving efficiency rather than cutting services, has been to implement Continuous Improvement (CI) but success has been sporadic and unpredictable. The well documented and pervasive CI methodologies in PSOs, including Lean and Six Sigma, have general agreement across practitioners and scholars alike, thus the reasons behind their potted success must lie elsewhere, in the culture or the environment perhaps? This work explores the wider contextual issues of CI implementation with the …

From Letters To Logistics - The Enabling Role Of A Lean Transformation Programme In A National Postal Service: The Case Of An Post, Ireland, Seamus O'Reilly, Leadiing Edge Group, An Post

International Conference on Lean Six Sigma

From Letters to Logistics - The enabling role of a lean transformation programme

in a national postal service: The case of An Post, Ireland

Seamus O’Reilly (Cork University Business School), David Murray (An Post) and Joe Aherne (Leading Edge Group)

Abstract

Purpose

This paper investigates the role of a lean transformation programme in supporting the transition of a national postal (mail) service from a traditional letter delivery service to a competitive parcel delivery service.

Methodology

Given the objective an intrinsic case study (Stake, 2005) approach was adopted, as this specific case was of interest. To support this approach the researchers …

Breaking The Acoustic Diffraction Limit With An Arbitrary Shape Acoustic Magnifying Lens, Ali Abdolali, Hooman Barati Sedeh, Mohammad Hosein Fakheri, Chen Shen, Fei Sun

Henry M. Rowan College of Engineering Departmental Research

Based on the transformation acoustics methodology, the design principle for achieving an arbitrary shape magnifying lens (ASML) is proposed. Contrary to the previous works, the presented ASML is competent of realizing far-field high resolution images and breaking the diffraction limit, regardless of the position of the utilized sources. Therefore, objects locating within the designed ASML can be properly resolved in the far-field region. It is shown that the obtained material through the theoretical investigations becomes an acoustic null medium (ANM), which has recently gained a significant attention. Besides the homogeneity of ANM, which makes it an implementable material, it is …

Creation And Application Of Various Tools For The Reconstruction, Curation, And Analysis Of Genome-Scale Models Of Metabolism, Wheaton L. Schroeder

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Systems biology uses mathematics tools, modeling, and analysis for holistic understanding and design of biological systems, allowing the investigation of metabolism and the generation of actionable hypotheses based on model analyses. Detailed here are several systems biology tools for model reconstruction, curation, analysis, and application through synthetic biology. The first, OptFill, is a holistic (whole model) and conservative (minimizing change) tool to aid in genome-scale model (GSM) reconstructions by filling metabolic gaps caused by lack of system knowledge. This is accomplished through Mixed Integer Linear Programming (MILP), one step of which may also be independently used as an additional curation …

Early-Age Strength Of Co2 Cured Alkali-Activated Blast Furnace Slag Pastes, Yubin Jun, Seong Ho Han, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The effect of CO₂ curing including pre-conditioning on alkali-activated slags, activated by different alkaline activators (NaOH, Na₂SiO₃, and KOH solution), is studied. While dry pre-conditioning before the CO₂ curing increases the strengths of all mixtures, the effect of pre-conditioning time is dependent on the alkali activator used to produce samples. The CO₃-bearing reaction product in samples also depends on the alkali activator. Gaylussite, pirssonite, hydrotalcite, and calcite are observed in the NaOH activator, and calcite, hydrotalcite, and C₄AcH₁₁ are detected in the NaOH and Na₂SiO₃ (9:1) …