Engineering Commons^™

Heterogeneous Extended Langmuir Model With A Truncated Multi-Normal Energy Distribution For Fitting Unary Data And Predicting Mixed-Gas Adsorption Equilibria, Sofia Tosso

Theses and Dissertations

A heterogeneous extended Langmuir model (HEL) that uses a truncated frequency energy distribution based on a one, two or three normal distributions is presented to predict gas adsorption mixtures of single, binary, and ternary gas experimental data involving CO2, H2S and C3H8 on H-modernite reported in the work of Ritter et al (1986) in terms of both solid phase molar fractions and total loadings. These models were initially fitted against single gas data and then used to predict binary data and to establish the type of perfect correlations, whether positive or negative, exist amongst these three species. The models then …

Optimizing Heat Pipes With Partially-Hybrid Mesh-Groove Wicking Structures And Its Capillary-Flowing Analysis By Simulation, Guanghan Huang

Theses and Dissertations

Heat pipes are known as efficient two-phase heat transfer devices and widely utilized in thermal management of power plants and electronics. The hybrid mesh-groove wick promises to attain a higher thermal performance of the heat pipe by balancing the permeability and capillarity. However, traditional fully hybrid mesh-groove wick presents considerable condensation thermal resistance due to the condensed quiescent working fluid and thick, saturated wick.

In this study, a novel partially hybrid mesh-groove wick has been proposed to enhance the evaporation of L-shaped copper-ethanol heat pipes. L-shaped heat pipe promotes high-efficient draining of condensed liquid by gravity, while traditional straight-shaped heat …

Jme 4110: Lego-Lock Block, Diana Engelhardt, Dmitriy Kornyukhov, Chelsea Borders

Washington University / UMSL Mechanical Engineering Design Project JME 4110

Design a building block device that assembles similarly to a LEGO brick, but also has the capability to lock an assembly state between two bricks. Scale (size) not critical for this proof of concept (standard LEGO blocks may be too small for this first attempt).

Jme 4110: Drag Line Wind Energy Generator, David Gengenbacher, Mouhamadou Bamba Kane, Brian Bakula

Washington University / UMSL Mechanical Engineering Design Project JME 4110

The goal of this project was to develop a prototype capable of power a 10 watt light bulb using only the energy from wind.

Jme 4110: Extended Hole Punch, Lucas Mennemeier, Jason Zobrist

Washington University / UMSL Mechanical Engineering Design Project JME 4110

DESIGN AND DEVELOP A WORKING PROTOTYPE OF A SINGLE-HAND, SINGLE-HOLE PUNCH WITH AN EXTENDED THROAT THAT WILL BE ABLE TO REACH FURTHER INTO A SHEET OF PAPER THAN A STANDARD SINGLE-HOLE PUNCH. THIS CAN BE A PUNCH ATTACHMENT OR A STAND-ALONE DEVICE. EITHER DESIGN CHOSEN WILL ALSO BE ABLE TO BE CONVERTED INTO AN EMBOSSING TOOL FOR EMBOSSING SEALS INTO DOCUMENTS

Jme 4110: Data Cooling Center, Christopher Schmidt, Brennan Fogarty, Suruchi Aryal

Washington University / UMSL Mechanical Engineering Design Project JME 4110

The group will design a way to efficiently move heat within a framework of using dielectric fluid as a heat transfer medium. The heat will be removed from a data center or a simulated data center. The group will evaluate the best possible design with the understanding that cooling data centers generate a large amount of heat. The design will also be constructed in such a manner that it can be scaled up to a larger size. Dielectric fluid will be used due to its efficiency compared to that of an air cooled system or a compressed refrigerant system. Account …

Jme 4110: Water Reservoir Energy Storage, Kristen Grace, Supapan Thammanok, Leticia Zoratto Lunge

Washington University / UMSL Mechanical Engineering Design Project JME 4110

The goal of this project was to create a demonstrative model of a Pumped Hydroelectric Storage System (PHS). A PHS stores energy by draining water from an upper reservoir through a turbine to generate electricity. This water is then pumped from a lower reservoir to the original upper reservoir to restart the system cycle. Using existing PHS applications, a small-scale prototype was built using an aquarium pump and mini turbine, along with PVC and plastic containers. When water is run through the system, a multimeter can be used to show the power output of the system. In addition to functionality, …

Jme 4110: Vibratory Parts Feeder, Adin Stambolic, Patrick Edward Vastola, Noah Herrin

Washington University / UMSL Mechanical Engineering Design Project JME 4110

Design an inexpensive, modular and tunable vibratory feeder to move different size particles from one place to another. The feeder can change according to the shape and size of the particles while in use.

Jme 4110: Mass Production Of Multi-Sphere Approximated Parts, Christopher Hartley, Chad Gorski, Matthew Brady

Washington University / UMSL Mechanical Engineering Design Project JME 4110

For this project, the team needs to design a mass production manufacturing process. The product of the process will be parts that represent, as closely as possible, approximations of parts developed using Discrete Element Modelling (DEM) software. Since the software uses spheres to efficiently model complex parts, the manufacturing process must also utilize spheres as the building blocks for the approximated parts. As a proof of concept, this project uses river pebbles as the parts being approximated by the software and modeled by the multi-sphere production process.

Near-Shore Sediment Transport Under Cnoidal Waves Using Particle Image Velocimetry, Jenna Rose Katrina

Theses and Dissertations

With future trends showing a higher percentage of the human population living along the coast, coastal resilience is a significant topic of concern for many researchers. The purpose of this research was to analyze near-shore sediment transport under different wave parameters using the technique of Particle Image Velocimetry (PIV) and laboratory studies for linear and nonlinear cnoidal waves. At the deeper extent of the nearshore profile, waves will tend to be linear, having an Ursell number less than 40, with little or no net sediment transport due to orbital velocities. The velocities are the same under the crest and trough …

Visualizing Publication Trends In Webology Journal: A Bibliometric Review Based On The Scopus Database (2006-2020), Ayush Kumar Patel, Madan Singh, Kunwar Singh, Avadhesh Kumar Patel, Akhilesh Kumar Varma, Ramesh Kuri

Library Philosophy and Practice (e-journal)

This study aims to explore the publication trends in Webology Journal. The Scopus database was chosen for the extraction of bibliographic data for the period 2006 to 2020. Then, VOSviewer software was used to analyse the data and generate visualization network maps. A total of 295 publications were found during the study period. The various bibliometrics indicators have been applied to identify the publication trends of Webology Journal. The finding revealed that the highest number of papers (92) and the maximum number of citations (273) appeared in 2020. Among the most contributing nations, Iran has contributed 63 documents, followed by …

Reduced Sample Minimum Strength Estimates For Novel Material Systems: Effects On Confidence And Structural Risk, Andrew Carl Ollikainen

Theses and Dissertations

There are ongoing efforts to standardize the materials, methods and process controls used in additive manufacturing. To support the broader use of additive manufacturing (AM) in the aerospace industry, the statistics working group of the Composite Materials Handbook (CMH-17) is evaluating whether its current methods of calculating minimum strength values are suitable for these new materials. The work presented in this dissertation investigates methods for determining minimum strength estimates in a way that will benefit application of AM materials in engineering practice. The greatest challenge in conducting such an assessment is accounting for the many variables in material, processing, and …

The Effects Of Noise On Parametrically Excited Systems With Nonlinear Damping, Donghao Li

Theses and Dissertations

Parametric oscillators are a class of resonating systems in which a parameter, such as stiffness in a mechanical system or capacitance in an electrical system, is periodically modulated in order to alter the system response in a desired manner. A resonance effect occurs when the pump frequency is near twice of resonant frequency. Such systems are said to be “parametrically pumped,” and this pump can, above a certain amplitude threshold, destabilize the system in the absence of nonlinearities. Parametric resonance is widely observed in nature and has been employed in a large variety of engineered systems, most notably in micro-electro-mechanical …

Design And Analysis Of A Pipe And Pump System Constructed To Connect Port Canaveral To The Banana River, Nicole Ann Mcclain

Theses and Dissertations

The Indian River Lagoon (IRL) has hosted an extensive array of plants and animals throughout its lifetime, having one of the greatest species’ diversity of all North American estuaries. In addition to the variety of marine wildlife that is supported by the IRL, the system is also a recreational and economic resource for the counties bordering it. The biological integrity of the IRL, however, has shown evidence of decline in the last few decades, due to impaired water quality caused by pollution and disruptions to natural circulation patterns. If far-reaching changes are made to repair the water quality of the …

Data Science For Building Energy Efficiency: A Comprehensive Text-Mining Driven Review Of Scientific Literature, Mahmoud M. Abdelrahman, Sicheng Zhan, Clayton Miller, Adrian Chong

Research Collection College of Integrative Studies

The ever-changing data science landscape is fueling innovation in the built environment context by providing new and more effective means of converting large raw data sets into value for professionals in the design, construction and operations of buildings. The literature developed due to this convergence has rapidly increased in recent years, making it difficult for traditional review approaches to cover all related papers. Therefore, this paper applies a natural language processing (NLP) method to provide an exhaustive and quantitative review.Approximately 30,000 scientific publications were retrieved from the Elsevier API to extract the relationship between data sources, data science techniques, and …

Promoting Diversity In Academic Research Communities Through Multivariate Expert Recommendation, Omar Salman

Graduate Theses and Dissertations

Expert recommendation is the process of identifying individuals who have the appropriate knowledge and skills to achieve a specific task. It has been widely used in the educational environment mainly in the hiring process, paper-reviewer assignment, and assembling conference program committees. In this research, we highlight the problem of diversity and fair representation of underrepresented groups in expertise recommendation, factors that current expertise recommendation systems rarely consider. We introduce a novel way to model experts in academia by considering demographic attributes in addition to skills. We use the h-index score to quantify skills for a researcher and we identify five …

A Computational Study Of Radiation Damage In Bilayer Silicon-Gold Structures, Cameron Hopper

Graduate Theses and Dissertations

Irradiation from sources such as nuclear reactors bombard materials with neutrons and heavy ions. The primary consequence of this irradiation is the displacement of atoms from their atomic structure. As the structure becomes damaged, the mechanical properties can change. Eventually, this can result in a failure due to embrittlement. This type of damage is hard to detect and can result in sudden, unexpected failure. Therefore, focusing on managing the consequences of irradiation has been a heavily researched topic. To manage irradiation, the focus is primarily to manage the voids and interstitials that appear during irradiation. Grain boundaries and amorphous regions …

Development Of A Reference Design For Intrusion Detection Using Neural Networks For A Smart Inverter, Ammar Mohammad Khan

Graduate Theses and Dissertations

The purpose of this thesis is to develop a reference design for a base level implementation of an intrusion detection module using artificial neural networks that is deployed onto an inverter and runs on live data for cybersecurity purposes, leveraging the latest deep learning algorithms and tools. Cybersecurity in the smart grid industry focuses on maintaining optimal standards of security in the system and a key component of this is being able to detect cyberattacks. Although researchers and engineers aim to design such devices with embedded security, attacks can and do still occur. The foundation for eventually mitigating these attacks …

Investigation Of Membrane Based Processes For Biomedical Applications, Efecan Pakkaner

Graduate Theses and Dissertations

As substantial developments were achieved in nanotechnology and polymer engineering, especially in the last few decades, the use of membranes and membrane-based procedures was found to be expanding into more and more research and development areas; including biological engineering, life sciences and biomedical engineering. Not only have they been the main focus of meaningful research, but they have also been the main pieces of the solutions to very thorny problems encountered within a wide range of applications from microfluidics to water treatment, thanks to their versatility, cost-effectiveness and biocompatibility, when compared to conventional separation techniques. To celebrate and embrace these …

Novel Eco-Friendly, Recycled Composites For Improved Ca Road Surfaces, Daniel Whisler, Rafael Gomez Consarnau, Ryan Coy

Mineta Transportation Institute

The continued use of structural plastics in consumer products, industry, and transportation represents a potential source for durable, long lasting, and recyclable roadways. Costs to dispose of reinforced plastics can be similar to procuring new asphalt with mechanical performance exceeding that of the traditional road surface.

This project examines improved material development times by leveraging advanced computational material models based on validated experimental data. By testing traditional asphalt and select carbon and glass reinforced composites, both new and recycled, it is possible to develop a finite element simulation that can predict the material characteristics under a number of loads virtually, …

Performance Testing Of Hot Mix Asphalt Modified With Recycled Waste Plastic, Shadi Saadeh, Pritam Katawał

Mineta Transportation Institute

Plastic pollution has become one of the major concerns in the world. Plastic waste is not biodegradable, which makes it difficult to manage waste plastic pollution. Recycling and reusing waste plastic is an effective way to manage plastic pollution. Because of the huge quantity of waste plastic released into the world, industries requiring a large amount of material, like the pavement industry, can reuse some of this mammoth volume of waste plastics. Similarly, the use of reclaimed asphalt pavement (RAP) has also become common practice to ensure sustainability. The use of recycled waste plastics and RAP in HMA mix can …

Efficiently Estimating Survival Signature And Two-Terminal Reliability Of Heterogeneous Networks Through Multi-Objective Optimization, Daniel Bruno Lopes Da Silva

Graduate Theses and Dissertations

The two-terminal reliability problem is a classical reliability problem with applications in wired and wireless communication networks, electronic circuit design, computer networks, and electrical power distribution, among other systems. However, the two-terminal reliability problem is among the hardest combinatorial problems and is intractable for large, complex networks. Several exact methods to solve the two-terminal reliability problem have been proposed since the 1960s, but they have exponential time complexity in general. Hence, practical studies involving large network-type systems resort to approximation methods to estimate the system's reliability. One attractive approach for quantifying the reliability of complex systems is to use signatures, …

A Machine Learning Approach To Understanding Emerging Markets, Namita Balani

Graduate Theses and Dissertations

Logistic providers have learned to efficiently serve their existing customer bases with optimized routes and transportation resource allocation. The problem arises when there is potential for logistics growth in an emerging market with no previous data. The purpose of this work is to use industry data for previously known and well-documented markets to apply data analytic techniques such as machine learning to investigate the uncertainty in a new market. The thesis looks into machine learning techniques to predict miles per stop given historical data. It mainly focuses on Random Forest Regression Analysis, but concludes that additional techniques, such as Polynomial …

Knowledge Discovery From Complex Event Time Data With Covariates, Samira Karimi

Graduate Theses and Dissertations

In particular engineering applications, such as reliability engineering, complex types of data are encountered which require novel methods of statistical analysis. Handling covariates properly while managing the missing values is a challenging task. These type of issues happen frequently in reliability data analysis. Specifically, accelerated life testing (ALT) data are usually conducted by exposing test units of a product to severer-than-normal conditions to expedite the failure process. The resulting lifetime and/or censoring data are often modeled by a probability distribution along with a life-stress relationship. However, if the probability distribution and life-stress relationship selected cannot adequately describe the underlying failure …

Butte Reclamation Evaluation System Field Manual, Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Influencing Perceptions Of Stem Through The Best Stem Books List, Scott Bartholomew, Alexia Seymour

Faculty Publications

One day, while discussing engineering and science as potential career options with a female student, we opened a search engine and typed in “engineer” and “scientist.” However, on the first pages of image results, only one female appeared for engineering and only a few females appeared for “scientist” (see Figure 1). This disparity was disturbing—if this student never saw another person like her filling careers in STEM fields, would she ever “picture herself” in those fields?

Design And Validation Of A High-Power, High Density All Silicon Carbide Three-Level Inverter, Zhongjing Wang

Graduate Theses and Dissertations

Transportation electrification is clearly the road toward the future. Compared to internal combustion engine, the electrified vehicle has less carbon-dioxide emission, less maintenance costs and less operation costs. It also offers higher efficiency and safety margin. More importantly, it relieves human’s dependence on conventional fossil energy. In the electrification progress, the revolution of electric traction drive systems is one of the most important milestone. The traction system should keep high efficiency to avoid performance reduction. Moreover, the motor drive should be designed within limited space without sacrificing output power rating. Based on the road map from US Drive Electrical and …

Vibransee: Enabling Simultaneous Visible Light Communication And Sensing, Ila Nitin Gokarn, Archan Misra

Research Collection School Of Computing and Information Systems

Driven by the ubiquitous proliferation of low-cost LED luminaires, visible light communication (VLC) has been established as a high-speed communications technology based on the high-frequency modulation of an optical source. In parallel, Visible Light Sensing (VLS) has recently demonstrated how vision-based at-a-distance sensing of mechanical vibrations (e.g., of factory equipment) can be performed using high frequency optical strobing. However, to date, exemplars of VLC and VLS have been explored in isolation, without consideration of their mutual dependencies. In this work, we explore whether and how high-throughput VLC and high-coverage VLS can be simultaneously supported. We first demonstrate the existence of …

Distributed Modeling Approach For Electrical And Thermal Analysis Of High-Frequency Transistors, Amirreza Ghadimi Avval

Graduate Theses and Dissertations

The research conducted in this dissertation is focused on developing modeling approaches for analyzing high-frequency transistors and present solutions for optimizing the device output power and gain. First, a literature review of different transistor types utilized in high-frequency regions is conducted and gallium nitride high electron mobility transistor is identified as the promising device for these bands. Different structural configurations and operating modes of these transistors are explained, and their applications are discussed. Equivalent circuit models and physics-based models are also introduced and their limitations for analyzing the small-signal and large-signal behavior of these devices are explained. Next, a model …

Experimental And Analysis Of Electromagnetic Characterization Of Biological And Non-Biological Materials In Microwave, Millimeter-Wave, And Terahertz Frequency Bands, Nagma Vohra

Graduate Theses and Dissertations

The goal of this research is to characterize the electromagnetic properties of biological and non-biological materials at terahertz (THz), millimeter-wave, and microwave frequency bands. The biological specimens are measured using the THz imaging and spectroscopy system, whereas the non-biological materials are measured using the microwave and millimeter-wave free-space system. These facilities are located in the Engineering Research Center at the University of Arkansas. The THz imaging system (TPS 3000) uses a Ti-Sapphire laser directed on the photoconductive antennas to generate a THz time domain pulse. Upon using the Fourier Transform, the spectrum of the pulsed THz signal includes frequencies from …