Engineering Commons^™

Performance Evaluation Of A Multi-Rotor Unmanned Agricultural Aircraft System For Chemical Application, Hang Zhu, Hongze Li, Anderson P. Adam, Liujun Li, Lei Tian

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Unmanned agricultural aircraft system (UAAS) has been widely employed as a low-cost and reliable method to apply agrochemicals to small agricultural fields in China. The performance of battery-powered multirotor UAAS has attracted considerable attention from manufacturers and researchers. The objective of this research was to design a UAAS equipping with a data acquisition system, to characterize its chemical application performance based on droplet deposition data and optimize the operating parameters. Each test was repeated three times to assess the reliability of the spraying system. Various flight parameters were also evaluated. The optimal spray pressure for the XR8001 and XR8002 (TeeJet, …

Numerical Investigation Of Thermo-Mechanical Field During Selective Laser Melting Process With Experimental Validation, Lan Li, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this study, thermo-mechanical simulation was conducted to predict thermal and stress behavior in Selective Laser Melting (SLM). Temperature-dependent material properties for processed material 304L stainless steel were incorporated into the model in order to capture the change from powder to fully dense solid stainless steel. Temperature and thermal stress history were tracked under conditions of different parameter sets which were designed to reduce defect formation. The thermal model predicted the temperature history for multi-track scans under different process parameters, such as laser power, effective scanning speed and hatch spacing. Subsequently, the corresponding melt-pool size, solidification rate and temperature gradients …

Bioinspired Fabrication Of Reconfigurable Elastomeric Cementitious Structures Using Self-Healing Mechanical Adhesives Interfaces, Vanessa Restrepo, Ramses V. Martinez

Purdue University Libraries Open Access Publishing Fund

Modern construction technologies are in high demand of new highly customizable and easy-to-assemble structural materials with enhanced mechanical performance and the capability to self-repair autonomously. This article describes the simple and cost-effective manufacturing of Self-Healing Elastomeric/Cementitious/Mechanical Adhesive Structures (SECMAS). SECMAS are comprised of cementitious bricks joined by mechanical adhesive interfaces and organized in nacre-inspired, brick-and-mortar structures. This scalable staggered design provides SECMAS with the capability to concentrate the formation and propagation of cracks along the mechanical adhesive interfaces, which efficiently distribute loading forces and accommodate deformation. The periodic distribution of elastomeric reinforcing layers inside the SECMAS facilitates its elastic self-recovery …

Minority Graduates In Engineering Technology: Trends In Choice Of Major, Yury Alexandrovich Kuleshov, Emily Rada, Anne M. Lucietto

School of Engineering Technology Faculty Publications

The paper presents a demographic analysis of college graduates in engineering technology (ET). The paper intends to investigate the graduates’ background, population, and choice of major. Graduates in ET are a much smaller population than those found in other Science, Technology, Engineering, and Mathematics (STEM) programs. Little publishing exists about who they are and how long it took to pursue their degree while examining other available demographic data. The delineation of this paper does not include computer science and computer technology programs. Several opinions exist about who these students are, where they come from, and what interests them. The paper …

Exploring Young Women’S Interest In Fluid Power With Workshop Experiences, Anne M. Lucietto, Jennifer D. Moss, Jose M. Garcia, John H. Lumkes

School of Engineering Technology Faculty Publications

Fluid power is not an engineering topic usually presented to students in grades K-12. However undergraduate students in various programs are required to learn this concept. Evidence exists that indicates college students are more easily engaged when fluid power has been introduced earlier in their schooling. Thus, a variety of organizations are beginning work toward providing programs to creatively present the topic to younger students. After an examination of existing literature, we found minimal evidence of this type of work having been carried out and reported on. This study examines data from workshops designed to introduce fluid power to middle …

Using Advanced Driving Simulation And Vibrotactile Cues To Train Drivers To Interact With Next-Generation Autonomous Vehicles, Gaojian Huang

Link Foundation Modeling, Simulation and Training Fellowship Reports

There are six levels of vehicle automation, from Level 0 – no automation to Level 5, fully autonomous [1]. According to several projections, the majority of vehicles on the road will be at intermediate levels for the next several years, meaning that vehicle-to-human takeover will be required in cases where the systems can no longer function due to design limitations, such as under poor weather conditions or in a construction zone [2], [3]. As shown in Fig. 1, the takeover process consists of signal response and post-takeover phases, which involves multiple steps, including perceiving the takeover requests (TOR), moving hands …

Hydraulic Characterization Of Porous Media For Remediation Applications In Geo-Environmental Engineering: Laboratory Experiment And Numerical Modeling, Syed Istiyak Ahmed

Theses and Dissertations

Hydraulic properties of porous media are very important characters for various geotechnical and geo-environmental applications. In this study, multi-step outflow experiments and numerical modeling were performed for homogeneous and layered column conditions with fine to coarse sands to investigate water flow mechanisms and better predict water flow and solute transport with the van Genuchten-Mualem (VGM) hydraulic model. Inversed modeling under HYDRUS-1D was performed to estimate six VGM soil hydraulic parameters. Forward modeling was conducted to evaluate the impacts of VGM hydraulic parameters along with saturated hydraulic conductivity to solute transport. Scaling effects such as column length, time, and chemical parameters …

Developing A Measure To Capture Middle School Students’ Interpretive Understanding Of Engineering Design, Jeremiah Pina, Glenn W. Ellis, Al Rudnitsky, Rebecca Mazur, Beth Mcginnis-Cavanaugh, Isabel Huff

Engineering: Faculty Publications

This research paper describes the development of an assessment instrument for use with middle school students that provides insight into students’ interpretive understanding by looking at early indicators of developing expertise in students’ responses to solution generation, reflection, and concept demonstration tasks.

We begin by detailing a synthetic assessment model that served as the theoretical basis for assessing specific thinking skills. We then describe our process of developing test items by working with a Teacher Design Team (TDT) of instructors in our partner school system to set guidelines that would better orient the assessment in that context and working within …

Solvent Effect Modeling In Heterogenous Catalysis, Mehdi Zare

Theses and Dissertations

In recent years, the biorefining industry and biofuels have emerged as a major American energy sector. Biofuels are fuels produced from plant and animal material, also referred to as biomass. This includes wood products, manure, and corn, among other materials. Compared to fossil fuels, biofuels are significantly more environmentally friendly and thus pose less of a threat to environmental health. In 2019, the United States consumed around 14.54 billion gallons of ethanol and around 1.81 billion gallons of biodiesel. By 2030, the United States is expected to consume around 95 Mtoe of biofuels. In order to meet current demand and …

Efficient Yet Robust Privacy For Video Streaming, Luke Cranfill, Junggab Son

Master of Science in Computer Science Theses

MPEG-DASH is a video streaming standard that outlines protocols for sending audio and video content from a server to a client over HTTP. The standard has been widely utilized by the video streaming industry. However, it creates an opportunity for an adversary to invade users’ privacy. While a user is watching a video, information is leaked in the form of meta-data, the size and time that the server sent data to the user. This information is not protected by encryption and can be used to create a fingerprint for a video. Once the fingerprint is created, the adversary can use …

Quality Mentorship Matters: An Innovative Approach To Supporting Student Success In Engineering Undergraduate Research, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

In this research study, the authors developed a new model of mentorship for faculty members to engage and support their group of students conducting undergraduate engineering research. Research efforts attest that mentoring undergraduate students is a critical role that can dramatically enhance student academic and personal outcomes. This finding is magnified in the context of STEM related disciplines, such as engineering, where efforts to pro-actively diversify the workforce are taking shape. Yet, not every form of faculty-student mentorship is proven to be effective, particularly when faculty conceal forms of knowledge and information regarding internship/employment resources, departmental and research opportunities, curriculum …

Website Based Library Service Development For Elementary School Library Services (Case Study: A Private Elementary School Library In Surabaya), Nasa Zata Dina, Iva Nur Annisya, Nyoman Juniarta

Library Philosophy and Practice (e-journal)

This study was conducted to develop library services at a private elementary school by developing a system using the waterfall method and PHP framework. It is developed to provide website based library. Many users, especially librarian, experience restlessness in cataloging, processing and lending services because all the services had been processed manually. Librarian’s workload increased because there is limited number of people work in the library. The purpose of this research is to make librarian easier to provide library services which are packaged in a website based library services. This study uses the waterfall method to develop library services. The …

Modernization Of Scienttific Mathematics Formula In Technology, Iwasan D. Kejawa Ed.D, Prof. Iwasan D. Kejawa Ed.D

Department of Mathematics: Faculty Publications

Abstract
Is it true that we solve problem using techniques in form of formula? Mathematical formulas can be derived through thinking of a problem or situation. Research has shown that we can create formulas by applying theoretical, technical, and applied knowledge. The knowledge derives from brainstorming and actual experience can be represented by formulas. It is intended that this research article is geared by an audience of average knowledge level of solving mathematics and scientific intricacies. This work details an introductory level of simple, at times complex problems in a mathematical epidermis and computability and solvability in a Computer Science. …

Sensor-Based Irrigation Of Maize And Soybean In East-Central Nebraska Under A Sub-Humid Climate, Jasreman Singh, Derek M. Heeren, Yufeng Ge, Geng Bai, Christopher M.U. Neale, Mitchell S. Maguire, Sandeep Bhatti

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The ever increasing pressure on the water resources in Nebraska and other irrigated agricultural areas require innovations and solutions for the governance of water allocation. This study proposes the use of sensor-based method for irrigation which has the potential to improve irrigation water use efficiency (IWUE). Practical methods and algorithms for creating irrigation prescriptions have become vital for the adoption of precision irrigation. A decision support system (DSS) for uniform irrigation was evaluated during 2020 growing season in a sub-humid region. The DSS was managed using soil water and plant feedback. In field practice, a sensor node station comprising of …

Impact Of Irrigation Technologies On Withdrawals And Consumptive Use Of Water, Eric Wilkening, Derek M. Heeren, Douglas R. Hallum, Jennifer Schellpeper, Derrel Martin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Developments in irrigation technologies have subsequently led to increases in irrigation application efficiency, including conversion from surface to sprinkler irrigation, variable rate irrigation (VRI), and low energy precision application. However, while these increases in application efficiency may reduce water withdrawals and/or diversions (from groundwater or surface water), they may not necessarily translate to additional water being available for future or downstream use. Consumptive use of water, water consumed and not returned to the local or sub-regional watershed, is not necessarily impacted by increased application efficiency, but is an important metric in conserving water for other uses. One recent irrigation technology …

Analysis Of Laminated Beams: A Bibliometric Review, Arati Waghmare, Sanjay Kulkarni

Library Philosophy and Practice (e-journal)

In this paper statistical analysis of literature on “Analysis of Laminated Beams” using Scopus and Web of Science database is done. Reason behind bibliometric study of literature is to understand the extent of research in this particular area. Since Scopus and Web of Science indexing are known as the most reliable sources amongst all the peer reviewed journals, literature from Scopus and Web of Science database only is taken into consideration. Benchmarks used for the analysis are publications in a year, published articles of different authors, citations of authors etc. Considered period is from 2000 to 2020. It is found …

Stockpiling Versus Composting: Effectiveness In Reducing Antibiotic-Resistant Bacteria And Resistance Genes In Beef Cattle Manure, Zachery R. Staley, Bryan L. Woodbury, Bobbi S. Stromer, Amy Schmidt, Daniel D. Snow, Shannon Bartelt-Hunt, Bing Wang, Xu Li

Department of Civil and Environmental Engineering: Faculty Publications

Manure storage methods can affect the concentration and prevalence of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in cattle manure prior to land application. The objective of this study was to compare stockpiling and composting with respect to their effectiveness in reducing ARB and ARGs in beef cattle manure in a field-scale study. Field experiments were conducted in different seasons with different bulking agents for composting. For both the winter-spring cycle and the summer-fall cycle, ARB concentrations declined below the limit of quantification rapidly in both composting piles and stockpiles; however, ARB prevalence was significantly greater in the composting …

Expanding A Mechanical Engineering Technology Curriculum To Include Additive Manufacturing, Hamid Eisazadeh, Mona Torabizadeh

Engineering Technology Faculty Publications

Additive Manufacturing (AM) has become a game changer for the manufacturing industry. With growing implementation of AM in various industries, it is the responsibility of different levels of education to expose students to AM technologies and to integrate AM into their curriculum. It is well known that students who gain the skillsets of today’s industry have a better chance in getting a competitive job. In response to this need, a new senior level elective course on AM, has been developed for the first time in Old Dominion University (ODU) region in the South. The course was developed and taught by …

Europa Environmental Testing Of Thermal Hardware For The Mapping Imaging Spectrometer For Europa (Mise) Instrument, Ian M. Mckinley, Jose I. Rodriguez, Mason Mok, Kristen S. Maynard, Curtis Bingham, Andrew Ostler, Patrick Strong

Space Dynamics Laboratory Publications

The Europa Clipper spacecraft, scheduled for launch in June 2022, hosts a suite of instruments including the Mapping Imaging Spectrometer for Europa (MISE). MISE is a high-optical through-put push-broom infrared imaging spectrometer that can collect measurements within Europa’s challenging radiation environment. It is externally mounted to the spacecraft and as a result is exposed to high radiation levels and cold temperatures. The instrument consists of a scan mirror assembly, an optical bench including a Dyson spectrometer and a telescope, and a structure that supports a cryocooler and a radiator. The cryocooler is used to actively cool the focal plane array …

An Adaptive Large Neighborhood Search For The Green Mixed Fleet Vehicle Routing Problem With Realistic Energy Consumption And Partial Recharges, Vincent F. Yu, Panca Jodiawan, Aldy Gunawan

Research Collection School Of Computing and Information Systems

This study addresses a variant of the Electric Vehicle Routing Problem with Mixed Fleet, named as the Green Mixed Fleet Vehicle Routing Problem with Realistic Energy Consumption and Partial Recharges. This problem contains three important characteristics — realistic energy consumption, partial recharging policy, and carbon emissions. An adaptive Large Neighborhood Search heuristic is developed for the problem. Experimental results show that the proposed ALNS finds optimal solutions for most small-scale benchmark instances in a significantly faster computational time compared to the performance of CPLEX solver. Moreover, it obtains high quality solutions for all medium- and large-scale instances under a reasonable …

The Multi-Vehicle Cycle Inventory Routing Problem: Formulation And A Metaheuristic Approach, Vincent F. Yu, Audrey Tedja Widjaja, Aldy Gunawan, Pieter Vansteenwegen

Research Collection School Of Computing and Information Systems

This paper presents a new variant of the Multi-Vehicle Cyclic Inventory Routing Problem (MV-CIRP) which aims to determine a subset of customers to be visited, the appropriate number of vehicles used, and the corresponding cycle time and route sequence, such that the total cost (e.g. transportation, inventory, and rewards) is minimized. The MV-CIRP is formulated as a mixed-integer nonlinear programming model. We propose a Simulated Annealing (SA) based algorithm to solve the problem. SA is first tested on the available benchmark Single-Vehicle CIRP (SV-CIRP) instances and compared to the state-of-the-art algorithms. SA is then tested on the benchmark MV-CIRP instances …

Step-Wise Deep Learning Models For Solving Routing Problems, Liang Xin, Wen Song, Zhiguang Cao, Jie Zhang

Research Collection School Of Computing and Information Systems

Routing problems are very important in intelligent transportation systems. Recently, a number of deep learning-based methods are proposed to automatically learn construction heuristics for solving routing problems. However, these methods do not completely follow Bellman's Principle of Optimality since the visited nodes during construction are still included in the following subtasks, resulting in suboptimal policies. In this article, we propose a novel step-wise scheme which explicitly removes the visited nodes in each node selection step. We apply this scheme to two representative deep models for routing problems, pointer network and transformer attention model (TAM), and significantly improve the performance of …

The Effects Of Ultraviolet Radiation On Aircraft Crewmember Health, Erin Johnston

Theses and Dissertations

Ultraviolet (UV) radiation and its effects on crewmember health will be evaluated by examining the variables that impact the intensity of UV radiation and the health concerns associated with this exposure. The purpose of this study was to (a) identify how Ultraviolet A (UVA) exposure is different in an aircraft cockpit when compared to the exposure at sea-level and (b) expose the adverse health impacts associated with an increased exposure of UVA radiation. This was accomplished through an examination of UV radiation and the variables that impact its effectiveness. After this analysis, the adverse health impacts experienced from UV radiation …

Development And Validation Of The Itf Scale: An Investigation Of Airline Passengers’ Intention To Fly During A Global Disruption, Guangda Liang

Theses and Dissertations

The purpose of the current study was to develop and validate the ITF scale that measured airline passengers’ intention to fly during a global disruption. Based on the review of the literature, the researcher identified several dimensions, and each dimension was measured by question items. The target population of the current study was airline passengers in the United States who were at least 18 years old. A sample was collected using the convenience sampling. The questionnaire was distributed online. The ITF scale was validated using data collected from the online questionnaire. A factor analysis was performed. The results of the …

Scaling Flight Test Data Between A Scaled Aircraft And A Cessna 172 For Use In Trajectory Energy Model Validation, Cody William Nettleton

Theses and Dissertations

Currently in the general aviation sector, a new type of aircraft is rising to prominence. It is known as Urban Air Mobility (UAM) and takes many shapes and sizes. The goal of UAM is to produce aircraft that can be used to travel into and out of the city in an efficient manner through the sky. This may cut down on many people’s commutes and lower the amount of ground traffic in cities. One core component of UAM research is to determine the fuel consumption during phases of flight such as conventional takeoff and landing, as well as cruise travel …

Endothelial Response In 2d And 3d To Doses Of Photosensitive Carbon Monoxide Releasing Molecules With Improved Activation, Nicholas Duc Huynh

Theses and Dissertations

Cardiovascular disease (CVD) is the leading cause of death worldwide in large part due to atherosclerotic obstruction of blood vessels. Limitations with current treatment approaches include restenosis in stenting and viable donor-tissue for bypass grafts, and this has motivated research combining the fields of drug delivery and tissue engineering for alternative approaches. The use of carbon monoxide as a potential therapeutic agent in the treatment of CVD has shown potential impacts on vasodilation and anti-inflammation. The goal of this study was to develop a system to elucidate the response of endothelial cells post-exposure to different concentrations of carbon monoxide releasing …

Stress Analysis Based On Ecg And Eeg, Eyad Talal Attar

Theses and Dissertations

Stress is a significant risk factor for various diseases such as hypertension, heart attack, stroke, and even sudden death. In many studies, stress is linked to decision making, performance, and learning. The heart rate variability (HRV) can be measured from the Electrocardiogram (ECG) and is defined as the variation of the interval between two consecutive heartbeats (heart rate). Heart rate variability is also an indicator of the balance between the sympathetic and parasympathetic branches of the autonomic nervous system. HRV refers to variations of heart rate in a certain amount of time. Heart rate variability (HRV) is a relatively new …

Addressing The ‘Unseens’: Digital Wellbeing In The Remote Workplace, Holtjona Galanxhi, Fiona Fui-Hoon Nah

Research Collection School Of Computing and Information Systems

The ubiquity of sophisticated devices, along with uninterrupted access to the Internet and organizational computerized systems, allows for the “anyplace” workplace to be established. Technology has the potential to deliberately or inadvertently impact psychological wellbeing. Specific psychological demands are inadvertently imposed on remote employees whose permanent online presence is required. Hence, it is important to understand factors affecting digital wellbeing and steps that can be taken to maximize the wellbeing of remote employees. This paper provides suggestions for future research on studying the digital wellbeing of (fully or partially) remote employees. A research framework is proposed to demonstrate the different …

Users’ Reception Of Product Recommendations: Analyses Based On Eye Tracking Data, Feiyan Jia, Yani Shi, Choon Ling Sia, Chuan-Hoo Tan, Fiona Fui-Hoon Nah, Keng Siau

Research Collection School Of Computing and Information Systems

Based on eye tracking technology, we study consumers’ overall attention to recommendations appearing at different time settings (i.e., early, mid, and late) and their attention to different information contained in each recommendation, such as recommendation signs, product descriptions, and reviews. By investigating consumers’ eye movement patterns and attention distributions on recommendations, we open the “black box” of why consumers’ reception to recommendations appearing at different time settings varies. The product preference construction literature and mindset theory help to explain why the early recommendations receive the most attention. The need for justification helps to explain why the late recommendations should receive …

Enhanced Solar Receiver Design: Using Modern Materials And Manufacturing Methods, Paul John Kepinski

Theses and Dissertations

Solar receivers are a core component in receiver technology used for solar thermal power plants that use mirror reflectors to concentrate solar radiation onto a single point. This point is where the solar receiver is located. The energy is transferred into a medium that can either be stored for overnight power needs or can be used immediately to generate steam to power an electrical grid. The purpose of this research is to see if efficiency of a solar receiver can be increased substantially using newer methods of 3D metal manufacturing and material sciences. The recommended solution is a cavity shaped …