Engineering Commons^™

The Effect Of Severe Intraventricular Hemorrhage On The Biorhythms Of Feeding In Premature Infants, Ira H. Gewolb, Babatunde T. Sobowale, Frank L. Vice, Abhijit R. Patwardhan, Nino Solomonia, Eric W. Reynolds

Biomedical Engineering Faculty Publications

Background: Suck-swallow rhythmicity and the integration of breathing into infant feeding are developmentally regulated. Neurological injury and breathing abnormalities can both impact feeding in preterm infants.

Objective: To determine the effects of neurologic injury independent of effects of disordered breathing on feeding biorhythms in premature infants.

Methods: Low-risk preterm infants (LRP), infants with Grade 3–4 Intraventricular Hemorrhage (IVH), those with bronchopulmonary dysplasia (BPD), and those with both BPD and IVH (BPD+IVH) were identified. Forty-seven infants, 32–42 weeks Postmenstrual Age (PMA) were evaluated on one or more occasions (131 studies). Of these, 39 infants (81 studies) were performed at >35 weeks …

Liquid Fuel Oil Produced From Plastic Based Medical Wastes By Thermal Cracking, Shahriar Bin Rasul, Uday Som, Md. Shameem Hossain, Md. Wasikur Rahman

Mechanical Engineering Faculty Publications

The present work is an effort to produce liquid fuel oil from plastic based medical wastes through thermal cracking process under oxidizing conditions. The mixed plastics from medical wastes were considered as a feedstock, shredded into small pieces and heated at 773 ± 10 K for 40 min with a heating rate of 20 K/min in a batch reactor for thermal cracking process. The feedstock was characterized by proximate and ultimate analysis along with thermogravimetric investigation. Moreover, chemical compositions of the liquid fuel oil were examined by FTIR and GC–MS spectroscopy. The properties of liquid product were also examined and …

Application Of Epoxy-Asphalt Composite In Asphalt Paving Industry: A Review With Emphasis On Physicochemical Properties And Pavement Performances, Yu Chen, Nabil Hossiney, Xu Yang, Hainian Wang, Zhanping You

Michigan Tech Publications, Part 1

One of the failure mechanisms associated with asphalt paving layers, especially on steel deck bridges, is large permanent deformation, which adversely affects its long-term performance in service. Thus, epoxy resin was introduced in asphalt paving industry to tackle permanent deformation of asphalt mixtures due to its thermosetting nature. In this review, epoxy resin as a dominant component of the epoxy-asphalt composite system was first considered, followed by a discussion on its curing methods and curing mechanism. Furthermore, the physicochemical property and mechanical performance of epoxy asphalt and epoxy asphalt mixture were thoroughly examined. Crosslink density of epoxy asphalt dictates its …

E-Scooter Safety And How To Improve It, Eric Valentino

altREU Projects

In the last few years, electronic scooters have taken over cities as a means of personal transportation. Between 2017 and 2019 alone, over 30 million trips were recorded across over 100 cities in the US. These scooters pose a safety risk, as 20 in 100,000 trips will result in injury of the rider. On top of this, scooters can cause damage to property, injury pedestrians and motor vehicle drivers, as well as obstruct important infrastructure such as wheelchair ramps. For these reasons, it is important to develop an understanding of the factors that contribute to e-scooter related injuries in order …

Contributory Factors Of Fatigue Among Collegiate Aviation Pilots: An Ordinal Regression Analysis, Flavio A. C. Mendonca, Julius Keller, Daniel Kwasi Adjekum

Publications

Fatigue is a pervasive safety hazard in aviation affecting several aspects of a pilot's’ ability to safely perform their jobs. Several factors can contribute to fatigue, including inadequate sleep, stress, long work hours, excessive workload, and inadequate nutritional habits. In addition to flight training, some factors including academic, social, part-time work, and emerging time management skills are unique for Title 14 Code of Federal Regulations (CFR) Part 141 collegiate aviation pilots. By utilizing the Collegiate Aviation Fatigue Inventory (CAFI-II) at eight flight programs (n = 422), the current study examined factors such as fatigue training received, time spent working/studying and …

High-Spatial-Resolution Transcriptomic Map Of The Mouse Lymph Node Microenvironment Using Deterministic Barcoding, Archibald Enninful, Yang Liu, Rong Fan

The Yale Undergraduate Research Journal

Spatial transcriptomics is an emerging approach which characterizes gene expression profiles for a more nuanced understanding of biological processes at a tissue level. This offers significant advantages over traditional omics which require the digestion of tissues and subsequent isolation of cells, during which the spatial information is completely lost. Lymph nodes are an integral part of the immune system and an in-depth analysis of its spatial organization will provide useful insights which can be applicable in the development of novel immunotherapies. In this study, the mouse lymph node is characterized using the newly developed microfluidic-based approach, Deterministic Barcoding in Tissue …

Navigation Service With Perspectives Of Digital Technology Developments In Maritime Sector, Hongzheng Zhang

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Safety Analysis Of Oog Cargo Stowage And Securing On Flat Rack, Zhendi Mu

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Exploring The Deformation Mechanics Of Coal Ribs Using The Distinct Element Modeling Approach, Maurice Sunkpal, Taghi Sherizadeh

Mining Engineering Faculty Research & Creative Works

Understanding coal rib geomechanics is essential for improving rib stability and eliminating fatality and injury trends due to rib failures. There are presently no standardized rib control practices available in most countries. In light of this observed dearth, this investigation aims to improve understanding of rib failure mechanisms using the distinct element modeling (DEM) technique. DEM is chosen because of its superior advantage to explicitly represent discontinuities and their constitutive behaviors, besides that of the intact rock matrix. To analyze the rib stability, a numerical monitoring protocol is implemented to monitor the deformation characteristics of the coal rock mass as …

Active Attestation Of Embedded Systems, Mark M. Stephenson, Patrick A. Reber, Patrick J. Sweeney, Scott R. Graham

AFIT Patents

An active attestation apparatus verifies at runtime the integrity of untrusted machine code of an embedded system residing in a memory device while it is being run/used with while slowing the processing time less than other methods. The apparatus uses an integrated circuit chip containing a microcontroller and a reprogrammable logic device, such as a field programmable gate array (FPGA), to implement software attestation at runtime and in less time than is typically possible with comparable attestation approaches, while not requiring any halt of the processor in the microcontroller. The reprogrammable logic device includes functionality to load an encrypted version …

Earth Imaging From The Surface Of The Moon With A Dscovr/Epic-Type Camera, Nick Gorkavyi, Simon Carn, Matt Deland, Yuri Knyazikhin, Nick Krotkov, Alexander Marshak, Et Al.

Michigan Tech Publications

The Earth Polychromatic Imaging Camera (EPIC) on the Deep Space Climate Observatory (DSCOVR) satellite observes the entire Sun-illuminated Earth from sunrise to sunset from the L1 Sun-Earth Lagrange point. The L1 location, however, confines the observed phase angles to ∼2°–12°, a nearly backscattering direction, precluding any information on the bidirectional surface reflectance factor (BRF) or cloud/aerosol phase function. Deploying an analog of EPIC on the Moon’s surface would offer a unique opportunity to image the full range of Earth phases, including observing ocean/cloud glint reflection for different phase angles; monitoring of transient volcanic clouds; detection of circum-polar mesospheric and stratospheric …

Analytical Model For Electromagnetic Induction In Pulsating Ferrofluid Pipe Flows, Huiyu Wang, John G. Monroe, Swati Kumari, Serhiy O. Leontsev, Erick S. Vasquez, Scott M. Thompson, Matthew J. Berg, Dibbon Keith Walters, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

No abstract provided.

Construction Disputes And Associated Contractual Knowledge Discovery Using Unstructured Text-Heavy Data: Legal Cases In The United Kingdom, Jeehee Lee, Youngjib Ham, June-Seong Yi

Civil and Environmental Engineering and Construction Faculty Research

Construction disputes are one of the main challenges to successful construction projects. Most construction parties experience claims—and even worse, disputes—which are costly and time-consuming to resolve. Lessons learned from past failure cases can help reduce potential future risk factors that likely lead to disputes. In particular, case law, which has been accumulated from the past, is valuable information, providing useful insights to prepare for future disputes. However, few efforts have been made to discover legal knowledge using a large scale of case laws in the construction field. The aim of this paper is to enhance understanding of the multifaceted legal …

Occupational Health And Job Satisfaction Assessment Of Bus Rapid Transit (Brt) Drivers, Alireza Samerei, Kayvan Aghabayk, Alireza Soltani

Journal of Public Transportation

Several studies have focused on ergonomics of commercial and urban bus drivers; however, there exists a dearth of research on BRT drivers. This study was conducted to investigate the factors affecting the BRT drivers' mental health and satisfaction. The study was carried out on 171 BRT drivers in Tehran, Iran. The required data were collected through two questionnaires. The Classification and Regression Tree (CART) and Hierarchical clustering (HC) was used to extract factors affecting mental health and satisfaction of BRT drivers. The important factors affecting BRT drivers' mental health were: dispute with passengers, depression, BMI, criminal behaviours of passengers, driver's …

Evaluation Of Guayule Resin As An Innovative Bio-Based Asphalt Alternative In Mix Performance -- Preprint, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Literature revealed the potential of using guayule resin for asphalt cement replacement from the binder’s perspective. However, monitoring guayule resin through binder-aggregate mixture could disclose its performance through field. In this study, designated binders were employed to investigate the applicability of such an innovative replacer through mixture, which were neat asphalt and guayule-based binders (neat guayule, asphalt-rubber-guayule, guayule-rubber binders). Consecutively, field-simulated lab mixtures were prepared to investigate the major distresses. Moisture damage, rutting, fatigue cracking, and thermal cracking resistances were investigated using the modified Lottman (TSR) test, rut test by asphalt pavement analyzer (APA), semi-circular bending (SCB) test, and disk-shaped …

Elementary Reaction-Based Kinetic Model For The Fate Of: N -Nitrosodimethylamine Under Uv Oxidation, Benjamin Barrios, Divya Kamath, Erica Coscarelli, Daisuke Minakata

Michigan Tech Publications, Part 1

UV photolysis is an effective process to remove nitrosamines from contaminated water resources. Nitrosamines represent a class of compounds with high potential for carcinogenicity and, therefore, there are serious concerns regarding their threat to human health and their environmental toxicity. Although the photochemical parameters of parent nitrosamines and their initial reaction pathways are well understood, the fate of nitrogen-containing species and reactive nitrogen species generated from nitrosamine degradation has not yet been elucidated. In this study, we develop an elementary reaction-based kinetic model for the photolysis of N-nitrosodimethylamine (NDMA) and the photochemical transformation products. We use density functional theory quantum …

Assessing The Impact Of Changing Drought Conditions On Wildfire Emissions In Washington And Oregon, Maggie Liu

altREU Projects

Wildfires impact public health, and threaten life, livelihood, and property across the United States, particularly on the West Coast. This project seeks to find correlations between drought and wildfire emissions by comparing the Modified Palmer Drought Index (PMDI) with smoke particulate (PM2.5) emissions from fires in Oregon and Washington. PM2.5 emissions were taken from 2002 – 2020 from the National Center for Atmospheric Research’s FINN model, which uses satellite observations of active fires to assign burned area, and compares against observed vegetation to model emissions. This project found the strongest positive correlation between fire activity for a summer season (July …

Online Grocery Shopping: A Staple Of The Present -- And Maybe The Future?, Henry B. Chao

altREU Projects

This project aims to understand how the COVID-19 pandemic has affected people's food shopping tendencies, specifically focusing on the use of online grocers. It uses data collected by a team of researchers led out of Portland State University. This data consists of roughly 8000 surveys distributed starting in September of 2020. The survey asks respondents to discuss their demographics, household resources, and shopping tendencies.

In particular, this project wants to understand how inclined a respondent is to use online grocers based on their personal experience with COVID-19. To do this, the project uses a Latent Class Model (LCM) to classify …

Modeling The Effect Of The Covid-19 Pandemic On Azithromycin Prescription In General Practices Across The Uk, Oluwasegun Isaac Daramola

altREU Projects

In the early months of the COVID-19 pandemic, it was reported that some antibiotics were prescribed as a remedy for viral treatment and prophylaxis based on non-randomized, uncontrolled short clinical trials. A major antibiotic consulted being Azithromycin; a broad-spectrum macrolide selected based on its immunomodulatory effects in chronic inflammatory lung diseases, with a seasonal prescription increase of 21.5% in March 2020 compared to March 2019.

To analyze the effect and possible antimicrobial resistance impact of the pandemic on Azithromycin prescription across general practices in the United Kingdom (UK), this study uses a time series decomposition modeling method to compare a …

Developing A Strategy For Creating Affordable Student Housing Solutions, Juan D. Campolargo

altREU Projects

College is becoming more and more expensive, and students are graduating with more and more debt. In 2021, we have almost 1.6 trillion dollars of student loan debt. While students are in college, they need a place to live, and this project will be about how to develop a strategy for creating affordable student housing solutions.

Housing should not be another cause of concern to students or really anyone.

The way it’s done is that people get more loans to pay for housing, or they work as much as they can when they’re not studying to pay for rent. Affordable …

Agent-Based Activity Generation Of Runners For City Infrastructure Planning, Quang Le

REU Final Reports

Since the pandemic started, many gyms and indoor classes have been shut down to mitigate the spread of Coronavirus. Many people have been forced to get onto pavement streets to get some fresh air while running around and coping with the new reality. There are over 60 million runners in the U.S., and that number is growing rapidly during this time without any sign of stopping once life gets back to normal. In this project, an agent-based model has been developed to generate a set of routes that runners would take in their daily run in a neighborhood of Portland …

Forest Park Trail Monitoring, Adan Robles, Colton S. Maybee, Erin Dougherty

REU Final Reports

Forest Park, one of the largest public parks in the United States with over 40 trails to pick from when planning a hiking trip. One of the main problems this park has is that there are too many trails, and a lot of the trails extend over 3 miles. Due to these circumstances’ trails are not checked frequently and hikers are forced to hike trails in the area with no warnings of potential hazards they can encounter. In this paper I researched how Forest Park currently monitors its trails and then set up a goal to solve the problem. We …

Finding Lonely Routes For Runners And Bikers, Ethan T. Spicher

REU Final Reports

With COVID-19 raging around the world, personal health is even more important to a lot of people. One way to maintain good physical and mental health is to exercise according to Deslandes [2]. When exercising it may be important to make sure that you are running/biking on trails that are less populated than others, as well as taking into account the distance. This can be solved by creating an algorithm that allows the user to choose the starting and end point, and the algorithm will then find the optimal path between the two points with the distance and popularity of …

Digitally Reporting Trail Obstructions In Forest Park, Colton S. Maybee

REU Final Reports

The inclusion of technology on the trail can lead to better experiences for everyone involved in the hobby. Hikers can play a more prominent role in the maintenance of the trails by being able to provide better reports of obstructions while directly on the trail. This paper goes into the project of revamping the obstruction report system applied at Forest Park in Portland, Oregon. Most of my contributions to the project focus on mobile app development with some research into path planning algorithms related to the continuations of this project.

Laser Surface Treatment And Laser Powder Bed Fusion Additive Manufacturing Study Using Custom Designed 3d Printer And The Application Of Machine Learning In Materials Science, Hao Wen

LSU Doctoral Dissertations

Selective Laser Melting (SLM) is a laser powder bed fusion (L-PBF) based additive manufacturing (AM) method, which uses a laser beam to melt the selected areas of the metal powder bed. A customized SLM 3D printer that can handle a small quantity of metal powders was built in the lab to achieve versatile research purposes. The hardware design, electrical diagrams, and software functions are introduced in Chapter 2. Several laser surface engineering and SLM experiments were conducted using this customized machine which showed the functionality of the machine and some prospective fields that this machine can be utilized. Chapter 3 …

Euler's Three-Body Problem, Sylvio R. Bistafa

Euleriana

In physics and astronomy, Euler's three-body problem is to solve for the motion of a body that is acted upon by the gravitational field of two other bodies. This problem is named after Leonhard Euler (1707-1783), who discussed it in memoirs published in the 1760s. In these publications, Euler found that the parameter that controls the relative distances among three collinear bodies is given by a quintic equation. Later on, in 1772, Lagrange dealt with the same problem, and demonstrated that for any three masses with circular orbits, there are two special constant-pattern solutions, one where the three bodies remain …

Using Artificial Neural Network And Fuzzy Inference System Based Prediction To Improve Failure Mode And Effects Analysis: A Case Study Of The Busbars Production, Saeed Na’Amnh, Muath Bani Salim, István Husti, Miklós Daróczi

Mechanical Engineering Faculty Publications and Presentations

Nowadays, Busbars have been extensively used in electrical vehicle industry. Therefore, improving the risk assessment for the production could help to screen the associated failure and take necessary actions to minimize the risk. In this research, a fuzzy inference system (FIS) and artificial neural network (ANN) were used to avoid the shortcomings of the classical method by creating new models for risk assessment with higher accuracy. A dataset includes 58 samples are used to create the models. Mamdani fuzzy model and ANN model were developed using MATLAB software. The results showed that the proposed models give a higher level of …

Research On Hybrid Deployment Strategy And Model For Key Position Air-Defense Based On Multi-Weapon Platforms, Jiaqing Wan, Pengfei Wang, Junlin Tang, Zhang Dong, Xinguo Li

Journal of System Simulation

Abstract: Multi-platform cooperative air-defense is the development direction of air-defense and antimissile warfare, and the hybrid deployment strategy and model are the important research content. Based on the background of key position air-defense research, the deployment strategy, principle and form of multi-platform cooperative air-defense are studied. The operational scenario and operational process of typical air defense are established. The principles, influencing factors and deployment methods of hybrid deployment are studied. A typical hybrid deployment strategy is proposed and a mathematical model is established. It provides support for the multi platform cooperative air defense and key position defense deployment.

Co-Simulation Of Parallel Computing Of Disc Temperature Distributed Parameter System Cooling Rate Control, Shengdong Gao, Yu Xin

Journal of System Simulation

Abstract: Aiming at the problem of large number of grids and long computation time in numerical simulation of complex engineering problems, combining the User-defined Function (UDF) parallel computing principle with UDP (User Datagram Protocol) communication in Fluent, the data transfer of the parallel calculation between Fluent and the visual simulation tool (Simulink) is completed by embedding UDF and S function in UDP communication. And the parallel calculation and simulation platform of the disk and billet gas impingement jet quenching is built. The serial and parallel calculation of the same model are carried out, and the comparative analysis of the numerical …

Research On Integrated Optimization Approach For Car-Sharing Systems, Tang Jie, Jinxin Cao

Journal of System Simulation

Abstract: Effective scheduling and routing of employees and vehicles determines the efficiency of car-sharing systems. Aiming at the scheduling of shared cars within one day, with the objective of minimizing the total system costs and personnel costs, a bi-level optimization model for multiple traveling salesman problem with time windows is established. A genetic algorithm with multi-chromosome coding and the optimized complex mutation operator are developed for the problem solution. From the comprehensive computational experiments, it can be concluded that the total numbers of vehicles and employees with the joint routing plans satisfying the order constraints can be obtained in …