Engineering Commons^™

Agri-Food Waste Reduction And Utilization: A Sustainability Perspective, Akinbode A. Adedeji

Biosystems and Agricultural Engineering Faculty Publications

As the human population edges closer to nine billion, we must explore how we can sustainably use Earth’s limited resources. Current agricultural production and food processing create significant amounts of wastes that have drastic effects on the environment, on the cost of production, and on human health and well-being. About a third of these wastes are produced domestically, as well as from agricultural production and food processing, and it often constitutes a disposal problem, although it contains many carbon-based materials (proteins, lipids, carbohydrates, micronutrients, bioactive compounds, and dietary fibers) that can be converted into useful value-added products. Converting these wastes …

Post-Seismic Response And Repair Of Earthquake-Damaged Reinforced Concrete Bridges, Giacomo Fraioli

Doctoral Dissertations

“In bridge structures, column members are typically designed to be the primary source of energy dissipation during an earthquake. Therefore, reinforced concrete (RC) bridges that are damaged in an earthquake tend to have damage to the column members. While many studies have been conducted on seismic strengthening of RC bridge columns, most are focused on retrofit instead of repair. In addition, the limited research on seismic repair of RC bridges has focused on evaluating the response of individual columns (member level), not the bridge structure (system level), due to limitations in modeling and especially testing of full bridge structures. Local …

Design Methods For Pressure Relief Well Systems At Dams And Levees, Andrew Keffer

Doctoral Dissertations

"Flood risk reduction structures such as dams and levees are important systems that provide significant benefits to the nation. Relief wells reduce the substratum water pressures that can compromise them via internal erosion. The U.S. Army Corps of Engineers (USACE) analytical method to design relief well systems by calculating discharge and excess head along an infinite line of wells was developed from the 1930s – 1950s. The research presented here increases our understanding of the method’s history and uses analytical and numerical models to improve current infinite and finite well system design practices. The historical development of this method was …

Bcmnet: Cross-Layer Extraction Structure And Multiscale Downsampling Network With Bidirectional Transpose Fpn For Fast Detection Of Wildfire Smoke, Jiayong Li, Guoxiong Zhou, Aibin Chen, Chao Lu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

At present, the wildfire smoke detection algorithm based on YOLOv3 has problems, such as low accuracy and slow detection speed. In this article, we propose a cross-layer extraction structure and multiscale downsampling network with bidirectional transpose FPN (BCMNet) for fast detection of wildfire smoke. First, a cross-layer extraction module, which combines linear feature multiplexing and receptive field amplification, is designed. It can improve the speed and accuracy of wildfire smoke detection. Second, a multiscale downsampling module with different convolution kernels and maximum pooling operation is designed to preserve the details of the image while downsampling. Then, a bidirectional transposed FPN …

Maize Response To Coupled Irrigation And Nitrogen Fertilization Under Center Pivot, Subsurface Drip And Surface (Furrow) Irrigation: Soil-Water Dynamics And Crop Evapotranspiration, Ali T. Mohammed, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Determination of crop evapotranspiration (ETc) and root zone soil-water dynamics/distribution coupled with nitrogen (N) management strategies is important for effective management of agricultural fields for enhancing production efficiency. However, limited data and knowledge exist that sufficiently inform how soil-water dynamics and ETc response may vary with coupled irrigation levels and different N application timings under different irrigation methods. Extensive field experiments were conducted in 2016 and 2017 under center pivot (CP), subsurface drip irrigation (SDI), and furrow irrigation (FI) at full irrigation treatment (FIT), 80% FIT, 60% FIT, and rainfed treatment (RFT) with N application timing treatments of traditional N …

Swosu Research And Scholarly Activity Fair 2022, Swosu Office Of Sponsored Programs

SWOSU Research and Scholarly Activity Fair Programs

On behalf of Southwestern Oklahoma State University, welcome to the Thirtieth Research and Scholarly Activity Fair! We are proud to host students and faculty from universities and community colleges from across the state at this meeting of scholars. Research and scholarly activity ranging from Business Administration, Education and Professional Studies, Fine Arts and Design, Liberal Arts, and Mathematics and Science.
.
.
.

Sincerely, SWOSU Office of Sponsored Programs and URSAC

Future Needs Of The Cybersecurity Workforce, Connie Justice, Char Sample, Sin Ming Loo, Alex Ball, Clay Hampton

Electrical and Computer Engineering Faculty Publications and Presentations

Expected growth of the job market for cyber security professionals in both the US and the UK remains strong for the foreseeable future. While there are many roles to be found in cyber security, that vary from penetration tester to chief information security officer (CISO). One job of particular interest is security architect. The rise in Zero Trust Architecture (ZTA) implementations, especially in the cloud environment, promises an increase in the demand for these security professionals. A security architect requires a set of knowledge, skills, and abilities covering the responsibility for integrating the various security components to successfully support an …

Evidence Of Coal Conversion In The Majuba Underground Coal Gasification Pilot Plant, South Africa, L.S. Mokhahlane, N.J. Wagner, D. Vermeulen

Coal Combustion and Gasification Products Journal Archive

Underground coal gasification (UCG) is a coal conversion method that permits coal resources to be exploited in situ using high-temperature conversion reactions. An understanding of the chemical, mineralogical, and petrographic properties of the coal, and resultant unburned carbon, degasified coal, and ash (minerals) in the UCG gasification zone, is fundamental to determining conversion rates, gas composition, and environmental and groundwater risk assessments. This study aims to provide a mineralogical and petrographic characterization of UCG residues obtained from the Eskom Majuba UCG pilot plant site in South Africa. Samples were selected from a verification borehole (VH3) drilled at the site following …

Low-Density And High-Strength Fracking Proppant Made By High Alumina Fly Ash, Shuqiang Ding, Jinder Jow

Coal Combustion and Gasification Products Journal Archive

High-alumina fly ash is defined to have alumina (Al2O3) content of no less than 40%, according to the Chinese power industry standard DL/T 2297. Specification for resource utilization categorization of fly ash from coal-fired power plant (Standard No. DL/T 2297-2021), and is considered a valuable raw material to replace bauxite for making aluminum, refractory materials, and fracking proppants, etc. A low-density and high-strength proppant, conventionally made with bauxite, has been successfully made by high-alumina fly ash and commercially used in the market. This new high-alumina f ly-ash–derived proppant has some advantages compared with the bauxite-derived proppant: (1) lower raw material …

Transdermal Drug Delivery Systems: Analysis Of Adhesion Failure, Zachary Brooks, Tushar Goswami, Amy Neidhard-Doll, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The most critical component of the TDDS is the adhesive, which is responsible for the safety, efficacy and quality of the patch. For drug delivery to successfully occur, the patch must adhere to the surface of the contact area. If a patch has inadequate adhesion, it is likely to fall off before the entire delivery period has been satisfied, leading to risks for the patient and others who may encounter the patch. Despite the critical concerns associated with the adhesive properties of the patches, the adhesion quality and failure mechanisms have not been fully studied. If certain molecules encounter the …

Retrospective Evaluation And Framework Development Of Bone Anisotropic Material Behavior Compared With Elastic, Elastic-Plastic, And Hyper-Elastic Properties, Farah Hamandi, James T. Tsatalis, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The main motivation for studying damage in bone tissue is to better understand how damage develops in the bone tissue and how it progresses. Such knowledge may help in the surgical aspects of joint replacement, fracture fixation or establishing the fracture tolerance of bones to prevent injury. Currently, there are no standards that create a realistic bone model with anisotropic material properties, although several protocols have been suggested. This study seeks to retrospectively evaluate the damage of bone tissue with respect to patient demography including age, gender, race, body mass index (BMI), height, and weight, and their role in causing …

Effect Of The Extended Rigid Flapping Trailing Edge Fringe On An S833 Airfoil, Hongtao Yu, Zifeng Yang

Mechanical and Materials Engineering Faculty Publications

A 2D numerical simulation was conducted to investigate the effect of an extended rigid trailing edge fringe with a flapping motion on the S833 airfoil and its wake flow field, as an analogy of an owl’s wing. This study aims to characterize the influence of the extended flapping fringe on the aerodynamic performance and the wake flow characteristics downstream of the airfoil. The length (Le) and flapping frequencies (fe) of the fringe are the key parameters that dominate the impact on the airfoil and the flow field, given that the oscillation angular amplitude is fixed at 5◦. The simulation results …

Reciprocal Regulation Of Transketolase-Like 1 And Hypoxia-Inducible Factor 1 Alpha In Metabolic Reprogramming And Growth Of Diffuse Midline Glioma, H3 K27m-Mutant, Christopher Andrew Waker

Browse all Theses and Dissertations

Diffuse midline glioma, K27M-mutant (DMG) are intractable brain tumors, primarily occurring in the pediatric and adolescent population. Patients have a median survival of less than one year after diagnosis. A lack of therapeutic targets has been a barrier to improvement in patient survival. Irradiation therapy improves symptoms while chemotherapy and surgical intervention, for the most part, have not yet demonstrated utility for treatment. DMG are characterized by a histone H3 mutation that results in the genome-wide loss of epigenetic-repressive marks on K27 and is associated with the misexpression of genes, like Cancer/Testis antigens. A member of this group, transketolase-like 1 …

Validating Software States Using Reverse Execution, Nathaniel Christian Boland

Browse all Theses and Dissertations

A key feature of software analysis is determining whether it is possible for a program to reach a certain state. Various methods have been devised to accomplish this including directed fuzzing and dynamic execution. In this thesis we present a reverse execution engine to validate states, the Complex Emulator. The Complex Emulator seeks to validate a program state by emulating it in reverse to discover if a contradiction exists. When unknown variables are found during execution, the emulator is designed to use constraint solving to compute their values. The Complex Emulator has been tested on small assembly programs and is …

Synthetic Aperture Ladar Automatic Target Recognizer Design And Performance Prediction Via Geometric Properties Of Targets, Jacob W. Ross

Browse all Theses and Dissertations

Synthetic Aperture LADAR (SAL) has several phenomenology differences from Synthetic Aperture RADAR (SAR) making it a promising candidate for automatic target recognition (ATR) purposes. The diffuse nature of SAL results in more pixels on target. Optical wavelengths offers centimeter class resolution with an aperture baseline that is 10,000 times smaller than an SAR baseline. While diffuse scattering and optical wavelengths have several advantages, there are also a number of challenges. The diffuse nature of SAL leads to a more pronounced speckle effect than in the SAR case. Optical wavelengths are more susceptible to atmospheric noise, leading to distortions in formed …

Low-Power, Low-Cost, & High-Performance Digital Designs : Multi-Bit Signed Multiplier Design Using 32nm Cmos Technology, N V Vijaya Krishna Boppana

Browse all Theses and Dissertations

Binary multipliers are ubiquitous in digital hardware. Digital multipliers along with the adders play a major role in computing, communicating, and controlling devices. Multipliers are used majorly in the areas of digital signal and image processing, central processing unit (CPU) of the computers, high-performance and parallel scientific computing, machine learning, physical layer design of the communication equipment, etc. The predominant presence and increasing demand for low-power, low-cost, and high-performance digital hardware led to this work of developing optimized multiplier designs. Two optimized designs are proposed in this work. One is an optimized 8 x 8 Booth multiplier architecture which is …

Demonstration Of High-Temperature Operation Of Beta-Gallium Oxide (Β-Ga2o3) Metal-Oxide-Semiconductor Field Effect Transistors (Mosfet) With Electrostatic Model In Comsol, Nicholas Paul Sepelak

Browse all Theses and Dissertations

β-Ga2O3 is a robust semiconductor material set with a large band gap of ~4.8 eV, low intrinsic carrier concentration, and high melting point that offers a stable platform for operating electronic devices at high temperatures and extreme environments. The first half of this thesis will cover the fabrication of a fixture and packaging to test electronic components at high temperatures. Then it will highlight the characterization of β-Ga2O3 field effect transistors from room temperature (RT) up to 500 °C. The devices, fabricated with Ni/Au and Al2O3 gate metal-oxide-semiconductor (MOS), demonstrate stable operation up to 500 oC. The tested device shows …

Advances In Chemotactic And Non-Chemotactic Bioremediation Of Water: A Comprehensive Review, Sheetal Pardeshi, Prafulla Shede

Applied Environmental Research

Pollution has reached to a critical threshold affecting the climate and diversity of the planet Earth. All global authorities have included pollution control in their agenda for near future. Most of the environmental research nowadays is focused on removing waste generated by anthropogenic activities, may it be solid, liquid or gaseous waste. Bioremediation is believed to be the most eco-friendly approach for reducing or removing pollutants contaminating different matrices of the environment. There are various methods covered under the umbrella term of bioremediation. Chemotaxis-mediated bioremediation attracted attention of several research groups since early decade of twenty first century due to …

Soil Contamination And Risk Assessments On Selected Dumpsites Within The Basement Complex And Sedimentary Formations Of Ogun State, South-Western Nigeria, Akintayo O. Ojo, Oluwaseun T. Olurin, Oluseyi O. Adeleke

Applied Environmental Research

The concentrations of inorganic elements in soils of Saje, Ita-Oshin, Premier, and Oke-Diya dumpsites were determined using an X-Ray Fluorescence spectrometer to assess the soil quality through chronological changes with depths. A soil core sampler collects 56 samples at 20, 40, 60, and 80 cm depths. Saje showed high mean concentrations of Ca, K, Fe, Rb, and Ti at all depths, while Oke-Diya revealed high mean concentrations of Ca, K, Fe, Rb, Ti, Mn, Zn, V, Cr, and Ni at all depths. These concentrations were in a closed range suggesting a build-up of elements in the soil profiles. Oke-Diya had …

Occurrence Of Microplastics In The Asian Freshwater Environments: A Review, Farah Akmal Idrus, Noradriena Mohd Fadhli, Mohd Nasarudin Harith

Applied Environmental Research

Microplastics pollution has become a worldwide common problem. Despite the growing numbers in researches regarding the microplastics, the understanding of microplastics in the freshwater environment are still less. This paper overviews the present knowledge and findings on the occurrence of microplastics in water and sediment of the freshwater environments in Asia. The review also covers the size distribution, polymers, morphological characteristics and sources of microplastics to the freshwater systems. Perspective of the adsorption of heavy metals on the microplastics to the freshwater systems are also discussed in this review.

Ecological And Human Health Risk Assessment Of Heavy Metals By Consuming The Aquatic Plant Species Near An Electronic Waste Open Dumpsite In Thailand, Thitima Parkpoom, Somsak Intamat, Uraiwan Phoonaploy, Lamyai Neeratanaphan

Applied Environmental Research

Heavy metals from electronic waste (e-waste) accumulate in the environment and can affect human health. The purpose of this study was to determine As, Cd, Cr and Pb concentrations in water, sediment and three species of edible aquatic plants (Ottelia alismoides, Ipomoea aquatic and Marsilea crenata) near an e-waste open dumpsite. Samples were collected from six sampling points surrounding an e-waste open dumpsite and heavy metal concentrations were analyzed by inductively coupled plasma optical emission spectrometry (ICP-OES). Bioaccumulation factors (BAFs), estimated daily intake (EDI), hazard quotient (HQ), hazard index (HI) and carcinogenic risk (CR) were evaluated in …

Assessing Vegetation Cover Change Using Remote Sensing: Case Study At Binh Duong Province, Vietnam, Nguyen Thi Huyen, Le Hoang Tu, Le Truong Ngoc Han, Vuong Thi Thuy, Dang Nguyen Dong Phuong, Nguyen Kim Loi

Applied Environmental Research

This study aims to present the application of remote sensing in monitoring vegetation change in Binh Duong Province, Vietnam. The study used Landsat 5 images in the year 2010 and Landsat 8 images in the years 2015 and 2020 to investigate the area of vegetation. The maximum likelihood classification method (MLC) was used to classify land cover and an accuracy matrix was computed to validate the classification results. The references data were collected to support classification and accuracy assessment processes including land use maps in 2010, 2015, and 2020. In addition, collected field points and UAV (unmanned aerial vehicle) in …

Indoor Air Quality Through The Lens Of Outdoor Atmospheric Chemistry, Jonathan P.D. Abbatt, Douglas B. Collins

Faculty Contributions to Books

Outdoor atmospheric chemistry and air quality have been the topic of research that intensified in earnest around the mid-20^th century, while indoor air quality research has only been a key focus of chemical researchers over the last 30 years. Examining practices and approaches employed in the outdoor atmospheric chemistry research enterprise provides an additional viewpoint from which we can chart new paths to increase scientific understanding of indoor chemistry. This chapter explores our understanding of primary chemical sources, homogeneous and multiphase reactivity, gas-surface partitioning, and the coupling between the chemistry and dynamics of indoor air through the lens of …

Power Decoupling Control And Optimization For A Photovoltaic Inverter In D-Q Rotation Frame, Zhaoxia Yang

All Graduate Theses, Dissertations, and Other Capstone Projects

In the past decade, solar energy, the fastest growing renewable energy, has been a growing interest in integration to the utility grid. Power electronics converters play important role in renewable energy integration, e.g., integrate the distributed photovoltaic (PV) panels to the grid. In many applications, particularly in the residential area, a single-phase rather than three-phase inverter is used to regulate the voltage from one form to the other while tracking the maximum power point of the PV system. The input voltage and current are DC and its maximum power is desired to be a constant value. However, in the single-phase …

A Progressive Learning Strategy For Large-Scale Glacier Mapping, Zhiyuan Xie, Umesh K. Haritashya, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

In recent years, the worldwide temperature increase has resulted in rapid deglaciation and a higher risk of glacier-related natural hazards such as flooding and debris flow. Due to the severity of these hazards, continuous observation and detailed analysis of glacier fluctuations are crucial. Many such analyses require an accurately delineated glacier boundary. However, the complexity and heterogeneity of glaciers, particularly debris-covered glaciers (DCGs), poses a challenge for glacier mapping when using conventional remote sensing or machine-learning techniques. Some examples exist about small-scale automated glacier mapping, but large or regional-scale mapping is challenging. Previously, a deep-learning-based approach named GlacierNet2 had been …

Eece 3204: Signals & Systems Ii (Syllabus), Madhusudhanan Balasubramanian

Electrical and Computer Engineering Syllabi Archive

Course Description: Introduction to discrete-time signals and systems in time and frequency domains; frequency representation of signals using discrete Fourier series, discrete Fourier transforms and Z transforms.

Design And Testing Of A Hybrid Direct Ink Writing And Fused Deposition Modeling Multi-Process 3d Printer, Alexander X. Losada

Honors Undergraduate Theses

Multi-material 3D Printing allows the ability to fabricate parts with tuned mechanical properties, multi-process 3D printing widens the choices of available fabrication materials. The objective of this study is to build a custom 3D printing test bed that is capable of printing multi-material parts with fused deposition modeling and direct ink writing techniques. A 3D printer, controlled by an industrial motion control system, with FDM and DIW capabilities was built by combining FDM extruders with a pneumatic dispensing system on a single platform. By utilizing the Direct Ink Writing function, we expand the number of printable materials to include some …

Numerical Simulation On The Effects Of Entrainment On Hydrogen Jet-In-Crossflow Combustion, Malcolm K. Newmyer

Honors Undergraduate Theses

This Research explores hydrogen combustion in a Jet-in-Crossflow configuration through computational fluid dynamics using ANSYS Fluent commercial CFD software. Three fuel-only hydrogen jets with a momentum flux ratio J of 10, 50, and 115 were introduced axially, using a large eddy simulation with a WALE sub grid model. Detailed chemistry was computed directly with a 9 species hydrogen/air kinetic mechanism. The 4mm jet and crossflow domain utilized an automatic mesh adaptation method centered around the flame shear layer. The study models the second stage of a lab-scale gas turbine test facility at a pressure level of 5atm,a crossflow temperature of …

Biochar From Empty Date Fruit Bunch As An Adsorbent To Remove Eriochrome Black T And Methylene Blue From Aqueous Solution, Houari Bella, Hayet Bendaikha

Applied Environmental Research

Date fruit has a significant role in Sahara countries' economies. In this study, a bunch of empty dates waste was used to produce biochar, which will be used to adsorb Eriochrome black T (EBT) and methylene blue (MB) dyes from aqueous solution. The dates bunch was washed, dried, and ground into small particles. Then it was heated in a muffle furnace at 850 °C. The biochar from empty date bunches (BEDB) characteristics before and after adsorption was determined by using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The experiment has used different parameters notably initial concentration (25 …

Comparison Of Particulate Load & Characterization In Drug Coated Balloons, Ryan Rykhus

Dissertations and Theses

Peripheral artery disease (PAD) is a disease that affects over 200 million patients worldwide and results in a narrowing of the blood vessels in the lower limbs that is caused by plaque buildup and chronic inflammation. The standard of care for treating this disease is the use of a drug-coated balloon (DCB) to open up the artery through the dilation of the vessel with the balloon and to deliver paclitaxel which prevents the vessel from narrowing after the procedure. In the United States, these DCBs are only approved by the FDA to be used in the artery segments above the …