Engineering Commons^™

Triggering Thermal Runaway In Lithium-Ion Batteries, Chris John

Honors Scholar Theses

The proliferation of lithium-ion batteries enables electric devices such as cell phones to electric vehicles to become a reality. A latent danger, however, exists in these batteries. Mechanical, thermal, or electrical damage can initiate a phenomenon known as thermal runaway (TR). This damage causes internal short circuits within the battery, releasing heat and triggering exothermic decomposition reactions. The battery will catch fire if rapid cooling is not present. While experimental designs exist for evaluating TR, significant safety hazards and impracticality may impede testing efforts. Finite element analysis, therefore, becomes a vital tool in modeling TR and mitigation techniques. However, there …

Study Of Porosity Of Gelatin-Alginate Hydrogels To Model Brain Matter For Studying Traumatic Brain Injuries, Apolline Vincent

Honors Scholar Theses

Traumatic brain injuries (TBIs) affect brain tissue and neuronal signaling, leading to many side effects including death. Research on TBIs is limited by the lack of accurate brain matter models to study the physiological and cellular reaction. Alginate-gelatin hydrogels have been designed and modified to mimic the mechanical properties of the brain to act as an accurate in vitro model. This Honors thesis aims to verify the porous microstructure of gelatin-alginate hydrogels through Scanning Electron Microscopy (SEM) to understand how gelatin and alginate affect the microstructure. I measured the pore sizes of each hydrogel using ImageJ, compared the average pore …

Modelling And Development Of An Automated Ldpe Autoclave Reactor In Cfd For Revealing Ethylene Hot Spots, Eric Turman

Masters Theses

Computational Fluid Dynamics (CFD) was employed to develop a rigorous model of a low-density polyethylene (LDPE) autoclave reactor. Different numerical settings within the solver were evaluated to minimize false diffusion and to reflect the sensitive heat generation taking place during free radical polymerization. The rigorous CFD model employed reaction kinetics, Proportional Integral Derivative (PID) automated thermal management, and a rotating stirrer shaft. Validation was carried out to determine the sensitivity to time-step size, turbulence model, and grid resolution. Data were compared to an industrial scale plant autoclave to guide the development of CFD. Time-step independence was confirmed by comparing the …

Effects Of Orthopedic Implant And Host Bone Properties On Stress-Shielding Induced Osteopenia, Scott Jason Jan Baskerville

Theses and Dissertations

Stress shielding is a term commonly used in literature to describe a bone density reducing phenomenon which occurs due to long-term exposure of bone tissue to sub-homeostatic levels of mechanical stimuli. A number of mechanobiological models ranging in complexity and purpose have been developed with the general overall intent of predicting bone remodeling behavior under a set of prescribed conditions. A previously developed heuristic model is expanded in the present work through model calibration with physiological data and the development of a reduced bone-implant-construct (BIC) mechanical model configurable for patient factors such as age, gender, and associated bone properties. The …

Detailing Of Carbon Fiber Reinforced Polymer Anchorage For Shear Strengthening, Paul Joseph Ryan

Theses and Dissertations

Carbon Fiber Reinforced Polymers (CFRP) have increased in popularity in the repair and strengthening of reduced shear capacity of concrete bridges. Significant design challenges arise when using CFRP to repair or strengthen bridge girders as the top faces of girders are in contact with decking (i.e. the members cannot be fully wrapped). A full wrap laminates all faces with CFRP and ensures that the failure mode is governed by shear fracture combined with, or followed by, fracture of the CFRP. The Florida Department of Transportation (FDOT) Structural Design Manual permits three-sided wrapping schemes (i.e. U-wraps), but the CFRP must be …

A Probabilistic Fog Stability Index For Predicting The Occurrence Of Radiation Fog At U.S. Airports, Kelisha Ali

Theses and Dissertations

Fog is a phenomenon that is widely known to affect the aviation industry adversely, as evidenced by economic losses due to the hindrance of fog on airport operations. This is because fog has been a consistent cause for delays, diversions, and cancellations of scheduled commercial airline flights that have subsequently resulted in a substantial negative economic impact on the transportation industry as well as society. This study’s purpose was to determine suitable predictors of the occurrence of radiation fog at U.S. airports. It assessed an extant Fog Stability Index (FSI) and 1-Day Persistence model for their reliability in predicting radiation …

Electrically Conductive Bearing Adapter Polymer Pad For Use In Freight Railcar Service Applications, Jesse M. Aguilera

Theses and Dissertations

Many freight railcars rest on polymer adapter pads made of injection-molded Thermoplastic Polyurethane (TPU) polymers which feature two copper studs to provide electrical conductivity through the adapter pads, which power onboard systems. In service, pads experience impact and cyclic loading, resulting in wear and plastic compression of the copper studs. This leads to signal interruptions and periodic replacement of the polymer pads, which results in downtime due to maintenance and reduced reliability since pad failure is unpredictable. These limitations in the current design are the impetus to create an electrically conductive polymer adapter pad that does not rely on the …

Railcar Wheel Impact Detection Utilizing Vibration-Based Wireless Onboard Condition Monitoring Modules, Marco A. Barrera

Theses and Dissertations

The current limitations in established rail transport condition monitoring methods have motivated the UTCRS railway research team at UTRGV to investigate a novel solution that can address these deficiencies through wired, onboard, and vibration-based analytics. Due to the emergence of the Internet of Things (IoT), the research team has now transitioned into developing wireless modules that take advantage of the rapid data processing and wireless communication features these systems possess. This has enabled UTCRS to partner with Hum Industrial Technology, Inc. to assist them in the development of their “Boomerang” wireless condition monitoring system. Designed to revolutionize the way the …

Evaluation Of Accelerated Testing Methods To Predict The Effects Of Chemical Exposure On Mechanical Properties Of Polyester Composites In Municipal Wastewater Service, Roberto A. Garcia

Theses and Dissertations

Composite Access Products (CAP) is a company that is determined to replace traditional steel manhole covers with fiber reinforced polymer alternatives that have similar performance while also introducing several advantages. CAP can achieve this by manufacturing the polymer manhole covers using high-speed, high pressure compressing molding to produce lightweight, long-lasting, corrosive resistant covers. CAP’s composite covers have been approved for use by TXDOT in roadway zones. Despite this, they must now undergo more testing and verification for use in environments with highly corrosive elements such as sewage environments and waste processing plants. In these situations, the polymer manhole covers will …

Machine Learning Based Aerodynamic Shape Optimization, Noe Martinez Jr.

Theses and Dissertations

The coefficient of pressure distribution for various 2D airfoil geometries were found using source – vortex panel methods. The data obtained in these simulations was used in multiple machine learning models which would predict the airfoil geometry from a given coefficient of pressure distribution. The neural networks employed were fully connected feedforward networks with Levenberg – Marquardt backpropagation and one model employed Bayesian Regularization. A novel tool for optimizing airfoil shape for a given coefficient of pressure distribution was created which performed well during testing. These models serve as the first step in minimizing the conflict between aerodynamic and stealth …

Self-Diverting Nanofluid In-Situ Gelled Acid For Matrix Acidizing Applications In Carbonate Formations, Javier Alejandro Perez

Theses and Dissertations

The main purpose of this project is to develop a nanofluid system that would help to divert the injected acid from the main flow regime into a relatively lower permeability zone and being able to dissolve the rock significantly. The system is meant to successfully create acidic gel in-situ after injecting the fluid in solution. It is expected that by altering either pH, temperature or amount of reactants, the viscosity of the fluid can be controlled so that the gel can be broken at a desired time.

Tribological Characterization Of Nickel-Based Cold Spray Coatings For Aerospace And Industrial Manufacturing, Albert Alejandro

Theses and Dissertations

Cold Spray Additive Manufacturing (CSAM) is a sub-category of thermal spray technology where a metal powder is accelerated in a gas stream toward a metal substrate at high velocities, producing a metallurgical bond with the metal substrate on impact. The present study investigates the effect of Al2O3 additions on the tribological properties of nickel-based cold spray coatings deposited on aluminum 6061 for aerospace and industrial manufacturing. The tribological performance of the nickel-based cold spray coatings with and without Al2O3 additions was evaluated using an abrasive wear test based on the ball-crater technique. In addition, the wear and friction characteristics of …

An Experimentally Validated Finite Element Model Of Thermal Transient Response Of A Railroad Bearing Adapter, Javier E. Arroyo

Theses and Dissertations

Wayside hot box detectors (HBDs) are devices used to determine the health of railcar components such as bearings, axles, and brakes by monitoring the radiated temperature form these components. HBDs have been instrumental in reducing rail derailments in the decade, but the number of non-verified bearing removals has increased significantly. To combat these limitations, researchers have opted to use wireless onboard sensor devices directly mounted on the bearing adapter. The wireless onboard health monitoring system developed by the University Transportation Center for Railway Safety (UTCRS) utilizes temperature and vibration sensors to detect the condition of rolling stock. However, because the …

Cloth-Water Interaction For Air Humidification In Hdh Desalination, Alejandro Corona Martinez

Theses and Dissertations

The humidification-dehumidification (HDH) desalination technology is a promising desalination process that has the potential to provide cost-effective and environmentally friendly saltwater desalination, especially when combined with renewable energy sources. The working principle mimics the natural hydrologic cycle, involving the evaporation of seawater into water vapor (humidification) and condensation into freshwater (dehumidification). HDH desalination can be land-based or ocean-based. Some of the advantages of ocean-based systems include removing pretreatment processes, utilization of ocean energy (i.e. thermal and kinetic), and eliminating brine production. This study focuses on the design and experimental testing of a novel humidifier …

Forecasting Salinity In The Laguna Madre Using Deep Learning, Martin J. Flores Jr.

Theses and Dissertations

Salinity is an important metric in the Laguna Madre for establishing the long term health of the local ecological population. By utilizing Deep Learning (DL) techniques, the predicted and forecasted salinity in the Laguna Madre is generated from data provided by the Moderate Resolution Imaging Spectroradiometer (MODIS)-Aqua satellite.

Currently, only one other DL model has been used to forecast Sea Surface Salinity (SSS), being a Recurrent Neural Network (RNN). However, the RNN model requires the prediction of a full area of salinity to function.

As such, several model architectures were tested, with the best one, being a Multi-input MPNN, utilized …

Machine Learning Tools In The Predictive Analysis Of Ercot Load Demand Data, Md Riyad Hossain

Theses and Dissertations

The electric load industry has seen a significant transformation over the last few decades, culminating in the establishment and implementation of electricity markets. This transition separates electric generation services into a distinct, more competitive sector of the industry, allowing for the introduction of greater unpredictability into the system. Forecasting power system load has developed into a core research area in power and energy demand engineering in order to maintain a constant balance between electricity supply and demand. The purpose of this thesis dissertation is to reduce power system uncertainty by improving forecasting accuracy through the use of sophisticated machine …

Non-Negative Discriminative Data Analytics, Md Imrul Kaish

Theses and Dissertations

Due to advancements in data acquisition techniques, collecting datasets representing samples from multi-views has become more common recently (Jia et al. 2019). For instance, in genomics, a lymphoma patient’s dataset may include data on gene expression, single nucleotide polymorphism (SNP), and array Comparative genomic hybridization (aCGH) measurements. Learning from multiple views about the same objective, in general, obtains a better understanding of the hidden patterns of the data compared to learning from a single view data. Most of the existing multi-view learning techniques such as canonical correlation analysis (Hotelling et al. 1936) and multi-view support vector machine (Farquhar et …

Hydrologic Modeling Study To Determine Hydrologic Impact Of Resacas On The Lower Laguna Madre Watershed, Antonio L. Reyna

Theses and Dissertations

During a high intensity storm events, a series of catastrophic events occur. These catastrophic events include flooding and destruction of infrastructure. Engineers have determined a method to design for high intensity storms based off hydrologic analysis of previous storms. With this data engineers can determine the outflow of major rivers and streams that may impact infrastructure. By determining the watershed engineers can predict the flow of the water and as well as the location of the outfall. In the Rio Grande Valley, water quality is very important because after rain events stormwater from cities is carried out towards the Laguna …

Investigation Of A Simultaneaous Direct And Indirect Contact Dehumidifier Using Parallel Strings For Hdh Desalination, Josue Perez Perez

Theses and Dissertations

Freshwater is a limited and precious resource. Currently, half a billion people in the world face sever water scarcity all year round. Humidification dehumidification (HDH) systems have received special attention among the variety of small-scale desalination technologies due to its potential to create affordable and sustainable seawater desalination, especially when combined with natural power sources such as waves, wind, and solar rays. Improvements in the development of HDH desalination systems have been achieved in recent years. Nonetheless, the improvements that have received most attention focus on solar heaters and humidifiers. Dehumidification systems have often been adapted from air conditioning condensation …

Water Quality Monitoring To Assess Pollutant Loadings In Brownsville Ship Channel Watershed, Ivan Rene Santos Chavez

Theses and Dissertations

The Brownsville Ship Channel (BSC) was listed as an impaired waterway from 2010 to 2018 due to screening levels of bacteria concentration. This study aims to address water quality at the three main tributary ditches draining into Brownsville Ship Channel to model present along with future pollutant loads within Brownsville Ship Channel Watershed. Load Duration Curves (LDCs) and Spatial Explicit Load Enrichment Calculation Tool (SELECT) models were developed to determine if current pollutant loads meet water quality standards stablished by the Texas Commission on Environmental Quality (TCEQ), and to estimate average daily potential E. Coli loading contribution from sub-watersheds within …

Building Services Engineering May/June 2022

Building Services Engineering

No abstract provided.

Analysis And Optimization Of The Two-Phase Series Capacitor Buck Dc-Dc Converter, Salahaldein Ali Aboajila Ahmed

Graduate Theses and Dissertations

Current sharing schemes for conventional multi-phase converters are based on sensing each phase current to deliver the current information to their controllers. In conventional buck converters, this fact may require a preset current sharing ratio at the expense of efficiency, which eventually requires a larger sensing circuit to achieve the sensing accuracy of each phase. Introducing the concept of automatic current sharing is one of the solutions to tackle this issue. Automatic current sharing (Current Sharing Mechanism CSM) is an advanced way to distribute heat generation in multi-phase switching topologies at full load. A two-phase series capacitor buck converter (2-pscB) …

2022 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2022.

Development Of Porous Solid Acid Catalysts For Lignocellulose And Plastic Upcycling., Mohammad Shahinur Rahaman

Electronic Theses and Dissertations

My goal is to develop chemical processes for transforming waste to solve environmental problems and enhance sustainability. Environmental problems such as pollution and massive amounts of waste are the main drivers that stimulate my research ideas. I focused on creating novel, efficient catalytic processes for converting polymeric waste "feedstocks" into high-value chemicals by integrating my expertise in catalysis, materials science, and synthetic chemistry to develop porous solid catalytic materials. During my Ph.D., I focused on two polymeric feedstocks, lignocellulose, and discarded plastic.

Early in my Ph.D. journey, I focused on catalytic upcycling of lignocellulose. Lignocellulosic biomass is cost-effective, abundant, and …

Sanitary Ware Waste As A Source For A Valuable Biodiesel Catalyst, Mai H. Roushdy

Chemical Engineering

Biofuel is a type of fuel that is made from biomass using modern techniques rather than the relatively slow geological processes that lead to the development of fossil fuels. In Europe, biodiesel is the most widely used biofuel. The sanitary ware industry generates a lot of hazardous waste, such as waste gypsum molds. These molds are broken, pulverized, and reacted with NaCO3 to make CaCO3, which is then heated to produce CaO. The resulting CaO catalyzes the reaction between waste frying oil and methanol for biodiesel synthesis. To evaluate the effect of reaction parameters on the production of biodiesel, the …

Additive Manufacturing Of Sensors For Extreme Environments, Kiyo Tiffany Fujimoto

Boise State University Theses and Dissertations

Advanced manufacturing based direct-write technologies have emerged as the predominant enabler for the fabrication of active and passive sensors for use in harsh operating environments. The ability to directly write and integrate electronic components onto physical packaging can be achieved with additive manufacturing (AM) methods such as direct write technologies (DWT) which include aerosol jet printing (AJP), Ink Jet Printing (IJP), Plasma Jet Printing (PJP), and Micro-Dispense Printing (MDP). In this work, we investigate the use of these methods to accelerate, modernize, and enhance the functionality of sensors and instrumentation to achieve the goal of improving the safety and efficiency …

Design And Analysis Of Beam Steering Antennas For Next-Generation Wireless Communication, Shafaq Kausar

Boise State University Theses and Dissertations

Reconfigurable antennas have gained immense interest since the last few decades. Reconfigurable antennas can steer beams dynamically in response to the signal environment, they can also support multiple simultaneous beams. This research work aims to make considerable advancements in the design and analysis of low cost and low power beam steerable antennas. It focuses on the design and demonstration of several prototypes with advanced functionalities, such as passive (broadband, multi-beam, shapable beams) and active (electronically reconfigurable) antennas. The first part of this dissertation covers the design and development of passive metamaterial based multibeam antenna at 30 GHz. Designed antenna is …

Towards Improving The Properties And Furthering Acceptance Of Advanced Technology Nuclear Fuels, Jennifer K. Watkins

Boise State University Theses and Dissertations

To avoid detrimental environmental impacts from climate change, the world community needs to push for the use of clean energy technologies. Development of proposed advanced technology nuclear fuels supports efforts to ensure nuclear energy is included as a non-carbon emitting source of electricity generation. Advanced technology nuclear fuels, also referred to as accident tolerant fuels (ATFs), have received renewed interest for use in the current nuclear reactor fleet as well as in advanced reactor technologies due to their high uranium loading, desirable thermophysical properties, and performance under irradiation as compared to the benchmark oxide fuel. A limiting consideration for the …

Multiphase Layered Transition Metal Oxide Positive Electrodes For Sodium Ion Batteries, Eric Gabriel, Dewen Hou, Eungje Lee, Hui Xiong

Materials Science and Engineering Faculty Publications and Presentations

Multiphase layered transition metal oxides (LTMOs) for sodium ion battery (SIB) positive electrodes with phase interfaces across multiple length scales are a promising avenue toward practical, high-performance SIBs. Combinations of phases can complement each other's strengths and mitigate their weaknesses if their interfaces are carefully controlled. Intra- and interparticle phase interactions from nanoscale to macroscale must be carefully tuned to generate distinct effects on properties and performance. An informed design strategy must be paired with relevant synthesis techniques and complemented by spatially resolved characterization tools to manipulate different length scales and interfaces. This review examines the design, synthesis, and characterization …

2022 Spring Graduate Recognition Program, Propulsion Research Center, Robert Frederick

PRC Graduate Recognition

This program includes the graduate recognition program for spring 2022. Includes photographs, upcoming events, recent publications, and student profiles.