Engineering Commons^™

Optimization And Information Problems In Operations, Puping Jiang

Olin Business School Graduate Student Theses and Dissertations

The main purpose of this dissertation is to study the optimization problems and the value of information in various commercial settings, especially in the emerging platform economy.

Chapter 1, “Data-Driven Asset Selling”. Motivated by online asset selling marketplace business (e.g., used cars and real estate), we formulate a data-driven asset selling dynamic pricing framework which utilizes platforms’ access to customers’ online behavioral data. With mild assumptions on the demand model, careful characterization of the problem structure shows that the model admits some ideal properties that facilitate our regret analysis under our dynamic programming setting. Instead of studying the policy performance …

Application Of Bismuth Oxychloride As A Colorimetric Uv Sensor Material, Kyle James Troche

Nanoscience and Microsystems ETDs

Sunlight contains about 9% UV radiation with roughly one-third of it penetrating the atmosphere and reaching the Earth’s surface. UV radiation from the sun is classified into three different types: UVA (315- 499 nm), UVB (280- 314nm), and UVC (100- 279 nm). Prolonged exposure to artificial UV radiation or direct sunlight can still induce many adverse effects such as sunburn, weakening of the immune system, and skin cancer. A wide variety of photoresistor, photodiode and colorimetric UV sensors are currently being researched to help monitor UV radiation. Our research is focused on developing a colorimetric UV sensor that is inherently …

Controlling The Emission Of Volatile Platinum Oxides To The Vapor Phase In Diesel Oxidation Catalysts, Arnab Ghosh

Nanoscience and Microsystems ETDs

Pt-based catalysts are used for the treatment of emissions from vehicles, particularly in Diesel oxidation catalysts (DOCs). Three-way catalysts are treated at temperatures ranging from 950℃-1050℃ while DOCs are aged at 800℃ for 50 hrs. At 800°C, Pt reacts with O₂ to form PtO₂ which has a high vapor pressure and can be transported through the vapor phase. These accelerated aging conditions lead to the formation of large Pt particles causing a loss of catalytic activity. In this thesis, we used model thin-film catalysts that made it possible to quantify the emission of Pt to the vapor phase …

Artificial Intelligence, Controls, And Sensor Fusion For Optimization And Modeling Of Space Missions And Particle Accelerators, Reza Pirayeshshirazinezhad

Mechanical Engineering ETDs

This PhD dissertation is devoted to developing artificial intelligence (AI) applications for space missions and particle accelerators considering constraints on the computational resources. The space mission studied in this research, the Virtual Telescope for X-ray Observations (VTXO), is the mission exploiting 2 6U-CubeSats operating in a precision formation. The goal of the VTXO project is to develop a space-based, X-ray imaging telescope with high angular resolution precision. VTXO space mission is designed and the mission is optimized to increase the performance of the mission. Trajectory optimization with AI, hybrid control, control algorithms, and high performance computing are all used to …

Aerodynamics And Turbulent Wake-Flow Characteristics Of Owls During Flapping Flight, Krishnamoorthy Krishnan

Electronic Theses and Dissertations

Owls exhibit unique flight capabilities in the low Reynolds number flow regime which is prone to complex viscous flow phenomena. They possess unique feather features and flexible wing structures which are postulated to help them fly nearly silently and stably at low speeds in a complex flow setting. Understanding the aerodynamics of owls could pave the way to enhance the future designs of small flying vehicles. Though it has been a focus of research over multiple decades, no conclusive agreement has been attained on the aerodynamic mechanisms associated with owl flight. Particularly, the aerodynamics of flapping owl flight is severely …

Updates And Improvements To The Satellite Drag Coefficient Response Surface Modeling Toolkit, Phillip Logan Sheridan, Smriti Nandan Paul, Guillermo Avendaño-Franco, Piyush M. Mehta

Mechanical and Aerospace Engineering Faculty Research & Creative Works

For satellites in the Low Earth Orbit (LEO) region, the drag coefficient is a primary source of uncertainty for orbit determination and prediction. Researchers at the Los Alamos National Laboratory (LANL) have created the so-called Response Surface Modeling (RSM) toolkit to provide the community with a resource for simulating and modeling satellite drag coefficients for satellites with complex geometries (modeled using triangulated facets) in the free molecular flow (FMF) regime. The toolkit fits an interpolation surface using non-parametric Gaussian Process Regression (GPR) over drag coefficient data computed using the numerical Test Particle Monte Carlo (TPMC) method. The fitted response surface …

Interpreting Uterine Contractions Using Physiological Models And Statistical Signal Processing, Uri Abraham Goldsztejn

McKelvey School of Engineering Graduate Student Theses & Dissertations

Pregnancy and labor are important stages in every mother and child’s life. Unfortunately, complications during pregnancy and labor are common. Every day, globally, about 800 mothers and 7000 newborns in their first month of life die from medical complications. Additionally, these complications result in about 5000 stillbirths daily around the world. Preterm births, labor dystocia, and postpartum hemorrhage are leading causes of maternal and child morbidity and mortality and are associated with inappropriate uterine contractile activity. Preterm births, i.e., those that occur before completing 37 weeks of gestation, are a leading cause of child morbidity and mortality. Preterm birth are …

Investigation Of Elastic Parameters And Pavement Modeling With Eps Geofoam, Engda Kassahun Temesgen

Dissertations - ALL

Models using EPS geofoam rely on input elastic parameters derived from compression tests on small size samples. Young's modulus and Poisson's ratio are parameters required to model isotropic and homogenous material behavior. For the most widely used EPS density grade of 20 Kg/m3 (1.25 pcf), Young's modulus of 4 MPa and Poisson's ratio of 0.1 are commonly used. Use of these values in models led to unreasonable long term deformation predictions that contradicted with field observations. Tests on small samples are prone to edge effects. Edge effects in turn result in underestimation of input elastic parameters. Alternative tests and sensing …

Development Of New, Diverse Triggering Mechanisms Of Shape Memory Polymers For Cell Mechanobiology Studies, Mark Macios

Theses - ALL

Over the past decade, several shape-memory polymer (SMP) substrates capable of changing topography under cell-culture conditions have been developed for the study of cell mechanobiology. Most initial reports of cytocompatible SMP platforms employed thermal triggering under ambient heating conditions, which, especially in hydrated environments, is a slow process that generally takes several minutes to a few hours. Also, biocompatible SMPs initially featured recovery temperatures too high for cells to maintain viability during the thermal trigger. To overcome the limitations of ambient thermal heating triggered shape recovery, the goal of this thesis was to develop new cytocompatible SMPs that can trigger …

Transformational Leadership And The Adoption Of Sustainability And Asset Management Practices In Ground Transportation Organizations, Mohammad M. Bushahri

Dissertations - ALL

The unprecedented challenges the infrastructure domain has been facing for the past few decades are forcing the authorities and owners of relevant organizations, particularly within the ground transportation sector, to introduce more innovative measures and to mitigate risks by embracing and adopting sustainability and asset management practices. This study examined the relationship between transformational leadership and the embracing and adopting of sustainability and asset management practices in the U.S. ground transportation sector. Further, this study assessed the mediation effect of organizational innovation on the relationship between transformational leadership style and the leaders' perception in terms of adaptation of sustainability and …

Manipulated Electrochemical Surface Reactions Induced By Oscillatory Electric Potentials On Metal Based Electrodes, Thomas Stone Welles

Dissertations - ALL

This research effort investigates the manipulation of surface electrochemical reactions induced by oscillating electric potentials on the surface of metal-based electrodes. Specifically, this research presents experimental data identifying modified electrochemical surface reactions caused by low magnitude electric potential oscillations on multilayered catalytic membranes and on implanted biometallic alloys. The scope of this effort consists of four major components: (1) perform an exhaustive literature review and analysis of the current understanding in applied surface electrochemistry and develop potential theoretical frameworks by which to interpret the experimental results; (2) identify the electrochemical manipulation via electrical oscillation while reacting nitric oxide on a …

Urban Air Mobility: Envisioning Uam As An Integrated Form Of Future Transport - A Las Vegas Case Study, Osarodion Victory Igbinobaro

Hospitality Design Graduate Student Capstones

Rapid urbanization has resulted in more people moving to cities to live and work. By 2030, an estimated 5 billion people will live in urban areas representing about 60% of the world's population. This increase in population growth brings forth new mobility challenges and opportunities for city planners, importantly, the challenge of transporting people and goods to their destinations in the most efficient, safe, quick and sustainable manner.

Traffic congestion, greenhouse gas emissions from vehicles, the cost of maintaining existing and building new transportation infrastructure are among several reasons why many cities seek sustainable alternatives to compliment their existing transport …

Thermal Management Using Liquid-Vapor Phase Change In Nanochannels, Sajag Poudel

Dissertations - ALL

Superior wettability of porous medium marks their potential to be used in the field of thermal management employing phase-change heat transfer. Comprehending the phenomena of wicking and liquid-vapor phase-change in micro/nano structured surfaces are key aspects towards advancing heat transfer solutions. In this work, fundamental understanding of droplet wicking, thin-film evaporation, and their subsequent application of heat-flux removal for cooling technology is first reported. The latter part of the dissertation is related to the disjoining pressure driven flow of nanoscale liquid film and liquid-vapor phase change in nano confinement. First, experimental and numerical investigation of droplet wicking in ∼728 nm …

Application Of Machine Learning For Predicting Iemi Upset In Multi-Architecture Microcontrollers, Daniel S. Guillette

Electrical and Computer Engineering ETDs

Four microcontrollers were programmed to execute a simple counting program. Pulsed RF signals – also known as Intentional ElectroMagnetic Interference (IEMI) – were injected into the clock input of the microcontrollers. At the same time, the output lines were monitored to determine whether the IEMI signal altered the output of the counting program – referred to as an upset. A state-of-the-art automated testing apparatus was used to collect and process 120,960 samples of IEMI upset data. The data was used to perform a traditional upset trends study and train a series of machine learning (ML) techniques – k-Nearest Neighbors, Support …

Decentralized Intelligent Decision Making In Cyber Physical Social Systems, Nathan Patrizi

Electrical and Computer Engineering ETDs

The accelerated evolution towards jointly considering the physical, cyber, and social space is expected to dramatically increase the interest of the research and industrial community to build efficient, resilient, and secure Cyber Physical Social Systems. In this dissertation, we focus our research activities on devising decentralized intelligent decision making models, frameworks, and algorithms to support the smooth operation of Cyber Physical Social Systems. The proposed decentralized intelligent decision making models are jointly exploiting theories from the field of Economics, such as Game Theory and Contract Theory, and from the field of Computer Science, such as Reinforcement Learning concepts. Reinforcement learning …

The Transport Of Acoustic Energy At Two-Dimensional Material Interfaces, Jesus Bolivar

Electrical Engineering Theses and Dissertations

The control of vibrational energy within solids is a fundamental engineering challenge with numerous technological applications. While the control of electrons and photons has revolutionized computation and communication, the control of phonons, the quantized particle of vibrational energy, has been far less successful. Acoustic energy is a form of vibrational energy that involves coherent excitations of phonons to form larger elastic waves. It is this coherence that allows it to be a valuable engineering tool for applications in imaging, frequency/time control, and structural monitoring. Traditional methods of reflecting acoustic energy involve interfacing different phases of matter to reflect via an …

Design And Nonlinear Control Of A Haptic Glove For Virtual Palpation, Matthew Galla

Mechanical Engineering Research Theses and Dissertations

This dissertation presents the design, kinematic analysis, and nonlinear control of a Haptic Glove for medical elastographic imaging virtual palpation. Of the 13 degrees of freedom present in the index finger, middle finger, and thumb of the hand, the design fixes 4, constrains 2 and controls 6 with pneumatic air cylinder actuators, allowing uncontrolled, but measured motion in the remaining 1 degree of freedom. Nearly linear bijective transfer functions between the actuator positions and joint angles are found in closed form for all 6 actuated joints. A nonlinear, sliding-mode controller that allows each actuator to be controlled by a single …

Optical Microresonator-Based Flow-Speed Sensor, Elie Ramon Salameh

Mechanical Engineering Research Theses and Dissertations

Optical sensors have become more prominent in atmospheric measurement systems, with LiDAR instruments deployed on a variety of earth-bound, air-borne, and space-based platforms. In recent years, the interest in the human exploration of Mars has created a substantial push towards reliable and compact sensing elements for Mars exploration missions, particularly during a spacecraft’s entry, descent, and landing stages. Real-time sensors able to reliably measure the craft’s speed relative to the surrounding atmosphere during these stages are thus of great interest. In this dissertation, a proof-of-concept for an optical microfabricated sensor, which leverages the whispering-gallery-mode (WGM) and Doppler shift principles, is …

Equity Of Urban Neighborhood Infrastructure: A Data-Driven Assessment, Zheng Li

Civil and Environmental Engineering Theses and Dissertations

Neighborhood infrastructure, such as sidewalks, medical facilities, public transit, community gathering places, and tree canopy, provides essential support for safe, healthy, and
resilient communities. This thesis proposes, develops, and implements an innovative approach to thoroughly examine the presence and condition of neighborhood infrastructure.
It demonstrates the necessity of considering multiple infrastructure types when studying
neighborhood infrastructure and its equity. This thesis provides an automated assessment
framework as well as case studies among four major metropolitan cities across the United
States, which expands the research opportunities for future infrastructure-related research.

The Effect Of Surface Gas/Liquid Entrapment On Drag Reduction, Haosen Tan

Mechanical Engineering Research Theses and Dissertations

Economic globalization has made today’s world more closely linked, where transportation (e.g. shipping, pipeline) has played an important role. Approximately over 60% (in air), 80% (underwater), and 100% (in pipeline) propulsive power is used to overcome surface drag, so reducing surface drag will have a substantial impact economically and environmentally.

To develop a surface that has lower drag, the intuitive idea is to convert no-slip boundary conditions to slip or partial slip ones. To achieve that, the most promising approach is to replace the solid-liquid boundaries completely or partially with gas-liquid or liquid-liquid boundaries, because the shear stress is much …

Resistive Pulse Sensing Of Protein Unfolding And Transport In Solid-State Nanopores, Jugal Saharia

Mechanical Engineering Research Theses and Dissertations

Solid-state nanopore sensors have attracted considerable attraction as a tool for solution-based single-molecule studies and have been successfully utilized for characterization of biomolecules such as nucleic acids, proteins, glycans, viruses, etc. Among these, characterization of proteins has been more challenging due to their charge heterogeneity and the complex energy landscape associated with different protein conformations. Presented in this thesis is the fabrication of solid-state nanopores and their application for characterizing proteins and understanding their transport through nanopores. Fabrication of nanometer-sized pores in Si_xN_y membranes was achieved using the conventional controlled dielectric breakdown method as well as a …

Modeling Framework And Solution Methodologies For On-Demand Mobility Services With Ridesharing And Transfer Options, Sepide Lotfi

Civil and Environmental Engineering Theses and Dissertations

The growing complexity of the urban travel pattern and its related traffic congestion, along with the extensive usage of mobile phones, invigorated On-Demand Mobility Services (ODMS) and opened the door to the emergence of Transportation Network Companies (TNC). By adopting the shared economy paradigm, TNCs enable private car owners to provide transportation services to passengers by providing user-friendly mobile phone applications that efficiently match passengers to service providers. Considering the high level of flexibility, convenience, and reliability of ODMS, compared to those offered by traditional public transportation systems, many metropolitan areas in the United States and abroad have reported rapid …

Enhanced Design For Testability Circuitry For Test, Hui Jiang

Electrical Engineering Theses and Dissertations

More stringent defect detection requirements have led to the creation of new fault models, such as the cell-aware fault model, that attempts to model defects that might be missed by traditional test sets. Unfortunately, the resulting test sets can be long, and thus we have previously explored a DFT-based (Design for Testability-based) approach to reduce test time by harnessing scan shift cycles for cell-aware defect detection. This approach uses a MISR (Multiple Input Signature Register) structure to capture data on the functional inputs to selected scan flip-flops during the shifting procedure. The final signature in the MISR can then be …

Closed-Loop Brain-Computer Interfaces For Memory Restoration Using Deep Brain Stimulation, David Xiaoliang Wang

Electrical Engineering Theses and Dissertations

The past two decades have witnessed the rapid growth of therapeutic brain-computer interfaces (BCI) targeting a diversity of brain dysfunctions. Among many neurosurgical procedures, deep brain stimulation (DBS) with neuromodulation technique has emerged as a fruitful treatment for neurodegenerative disorders such as epilepsy, Parkinson's disease, post-traumatic amnesia, and Alzheimer's disease, as well as neuropsychiatric disorders such as depression, obsessive-compulsive disorder, and schizophrenia. In parallel to the open-loop neuromodulation strategies for neuromotor disorders, recent investigations have demonstrated the superior performance of closed-loop neuromodulation systems for memory-relevant disorders due to the more sophisticated underlying brain circuitry during cognitive processes. Our efforts are …

Surface Acoustic Wave Characterization And Interdigitated Transducer Optimization For Studying Stress-Enhanced Phenomena, Brian D. Rummel

Nanoscience and Microsystems ETDs

Surface acoustic wave devices have not yet achieved their full potential as the effects of standing acoustic fields on stress-sensitive phenomena in semiconductor systems have been largely unexplored. From this perspective, it is necessary to develop novel methods to characterize surface acoustic wave devices quantitatively and prepare an experimental platform to probe stress-enhanced processes. In this dissertation, interdigitated transducer devices are fabricated on gallium arsenide to evaluate their potential impact on strain-enhanced phenomena. A novel Raman characterization technique characterizes the surface stress induced by a standing acoustic field, revealing stress values on the order of 10⁸ Pa. FEM software …

Enhancing Optical And Thermal Properties Of Nanofibrous Films Inspired By The White Beetle Scale, Bokyung Park

Nanoscience and Microsystems ETDs

The Cyphochilus white beetle has received significant attention recently for its exceptional visible-light-scattering properties, owing to the beetle scale's anisotropic nano-fibrillar network structure. Inspiration from the remarkable optical properties of these biological species has directed research efforts to fabricating biomimetic nano-fibrillar structures with polymer materials. In this work, electrospun silk fibroin polymer films reproduce the white beetle scale's anisotropic nature to draw on its optical scattering properties and further improve the radiative-cooling capabilities of silk fabrics. An anisotropically restructured silk film with a mean fiber diameter of a few hundred nanometers substantially increases optical scattering strength in the visible spectrum …

Examination Of Ionization In Cesium Diode Pumped Alkali Lasers With An Ion Chamber Diagnostic, Benjamin Oliker

Optical Science and Engineering ETDs

Diode pumped alkali lasers (DPALs) are leading candidates for future high power applications, with many potential utilities for the military, aerospace, communications, and scientific diagnostics. A critical step in their development is measurement and understanding of unwanted ionization processes that occur inside the laser, which decrease efficiency, reduce the usable alkali population, and increase heat load. In this dissertation, direct measurement of the ionization rate of a cesium DPAL gain medium are made for the first time, via application of an ion chamber diagnostic. Results will demonstrate that the rate of ionization is slow compared to pump absorption, with a …

Multi-Scale Modeling Of Dislocation Motion And Interaction: Theory, Plastic Properties, And Boundary Conditions, Abu Bakar Siddique

Mechanical Engineering ETDs

Dislocation theory is the fundamental tool for explaining plasticity in the material. The elastic field of a material is always influenced by the presence of dislocations and other defects independent of the loading configurations. Scientists and researchers have minimal success in solving plasticity problems analytically. And for this reason, the capturing of dislocation dynamics is highly dependent on numerical modeling, which is always a challenge for its inherent multi-scale nature. Current research investigates and develops self-consistent numerical models for different plasticity problems based on the distributed-dislocation technique and the collocation-point method. Numerical methods are developed for different boundary conditions in …

Ailbot: A Respiratory-Focused Symptom Checker Chatbot For Children, Gabrielle Mae V. Arco, Ken Ivan T. Cheng, Pamela S. Chong, Chico Andre G. Olaguer

DLSU Senior High School Research Congress

Inadequate access to healthcare, accompanied by the spread of COVID-19 has significantly affected most Filipinos. The prolonged quarantine period in the Philippines due to this virus restricts the movement and lifestyle of people. Thus, it makes medical appointments difficult to arrange. The ever-growing number of healthcare chatbots can provide access to healthcare check-ups quickly. These systems are still in their infancy stages, with the majority focusing on the mental and emotional well-being of people and catering to the general public. This study aims to develop a chatbot geared toward the respiratory health of Filipino children. Through the use of Chatfuel, …

An Analysis On The Usability Of A Mental Health Assessment Chatbot For Teenagers, Amanda Maria R. Sablay, Fiona Amaia M. Tano, Jazmin Abigail R. Zulueta

DLSU Senior High School Research Congress

Globally, people are faced with barriers to mental intervention due to a lack of resources, especially in low-income countries. Mental health chatbots have gained popularity due to their accessibility. However, the usability of a mental health chatbot designed to assess the mental well-being of Filipino teenagers is yet to be quantified. This paper aims to determine the acceptance of Filipino teenagers towards a chatbot as a medium to assess their mental well-being. This study presents a design for a conversation flow based on the Pediatric Symptom Checklist to create a text-based chatbot application verified by end-users and a psychologist. From …