Engineering Commons^™

Influence Of Coal Mining On Shallow Groundwater Environment Response To Coal Mining And Mine Water Ecological Utilization Analysis, Chai Jianlu

Coal Geology & Exploration

The contradiction between coal and water is prominent in the upper and middle reaches of the Yellow River Basin, and coal mining activities has caused certain damage to groundwater environment in those areas. So the quantity and quality characteristics of mine water for the Yushenfu mining area in Yulin City of northern Shaanxi Province were analyzed to reveal the influence of coal mining on the groundwater environment, and the ecological utilization study of mine water was also carried out based on field investigation, data analysis and laboratory tests. The results show that the mine water content coefficient in the study …

Evaluation Of Resources And Environment Carrying Capacity Of Xilinhot Mining Area Based On Multi-Source Data, Sun Jundong, Song Renzhong, Li Feiyue, She Changchao, Guo Tianyu, Li Jun, Zhang Chengye

Coal Geology & Exploration

The mining and depletion of coal resources have a certain degree of impact on the environment and population of the coal mining area. Confronted with the resources and environment problems, China strongly advocates the construction of green mines, requiring that mine exploitation must be within resources and environment carrying capacity. With the support of multi-source data (Landsat 8, GF-2, etc.) and socio-economic statistics data, Analytic Hierarchy Process was used to construct an index system for evaluating resources and environment carrying capacity of the mining area in Xilinhot, Inner Mongolia from two aspects of the carrying background and the carrying statu. …

Structure Optimization And Drilling Capacity Analysis Of A Self-Propelled Straight-Swirling Mixed Jet Bits, Du Peng, Zhang Wending

Coal Geology & Exploration

As the core part of hydro-jet radial drilling technology for coal-measure gas extraction, the self-propelled jet drill bit has a decisive impact on drilling efficiency. In order to obtain the optimal parameters of the direct rotating mixed jet, the velocity characteristics of the three-dimensional flow field with different bit structure parameters are analyzed by the combination of Fluent numerical simulation and specific experiments, and the optimization criteria are given. The optimal parameters of the drill bit are obtained in the drilling test: the central hole of diameter 1.2 mm, the impeller groove of width 0.7 mm, the impeller of thickness …

Employing Boundary Element Approach With Genetic Algorithm To Increase Travel Range Of Repulsive Actuators, Yu Tian, Ronald N. Miles, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

The design of repulsive electrostatic actuators having enlarged travel range is achieved by combining the boundary element approach and a genetic algorithm. The boundary element method enables calculating the electrostatic forces without time consuming finite element simulations. Once a static equation that uses a model of effective lumped mass solves the travel ranges, the GA maximizes travel ranges by optimizing the dimensional parameters. The effectiveness of the scheme is demonstrated with extensive experimental results showing the travel ranges of a micro out-of-plane actuator are increased by up to 190%. The developed platform can improve the signal-to-noise ratios and the performance …

Atomic Gradiometry Based On The Interference Of Microwave Optical Sidebands, Kaleb L. Campbell

Optical Science and Engineering ETDs

We describe a novel pulsed magnetic gradiometer based on the optical interference of sidebands generated using two spatially separated alkali vapor cells. The sidebands are produced with high efficiency using parametric frequency conversion of a probe beam interacting with Rubiduim 87 atoms in a coherent superposition of magnetically sensitive hyperfine ground states. First, experimental evidence of the sideband process is described for both steady-state and pulsed operation. Then, a theoretical framework is developed that accurately models sideband generation based on density matrix formalism. The gradiometer is then constructed using two spatially separated vapor cells, and a beat-note is generated. The …

Cyberpunk As An Evolution From Science-Fiction And Its Social Critiques, William C. Svihla

University Honors Program

In this paper, I will take an investigative deep dive into all that is the literary genre of cyberpunk. I will touch on the origins and development of science-fiction, the genre that birthed cyberpunk, and how science-fiction led up to cyberpunk’s birth. I discuss the origins of cyberpunk and where and when it first entered the scene. The literary differences between the two genres. And the main areas of social critique that are focused on for each as well. For science-fiction’s areas of social critique, I discuss their ever-present use of the dangers of man’s hubris first made present in …

Ds-Menet For The Classification Of Citrus Disease, Xuyao Liu, Yaowen Hu, Guoxiong Zhou, Weiwei Cai, Mingfang He, Jialei Zhan, Yahui Hu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Affected by various environmental factors, citrus will frequently suffer from diseases during the growth process, which has brought huge obstacles to the development of agriculture. This paper proposes a new method for identifying and classifying citrus diseases. Firstly, this paper designs an image enhancement method based on the MSRCR algorithm and homomorphic filtering algorithm optimized by Laplacian (HFLF-MS) to highlight the disease characteristics of citrus. Secondly, we designed a new neural network DS-MENet based on the DenseNet-121 backbone structure. In DS-MENet, the regular convolution in Dense Block is replaced with depthwise separable convolution, which reduces the network parameters. The ReMish …

Injectable Hydrogel With Immobilized Bmp-2 Mimetic Peptide For Local Bone Regeneration, Kirstene A. Gultian, Roshni Ghandi, Kayla Decesari, Vineeth Romiyo, Emily P. Kleinbart, Kelsey Martin, Pietro M. Gentile, Tae Won B. Kim, Sebastian Vega

Henry M. Rowan College of Engineering Departmental Research

Osteoporosis is a disease characterized by a decrease in bone mineral density, thereby increasing the risk of sustaining a fragility fracture. Most medical therapies are systemic and do not restore bone in areas of need, leading to undesirable side effects. Injectable hydrogels can locally deliver therapeutics with spatial precision, and this study reports the development of an injectable hydrogel containing a peptide mimic of bone morphogenetic protein-2 (BMP-2). To create injectable hydrogels, hyaluronic acid was modified with norbornene (HANor) or tetrazine (HATet) which upon mixing click into covalently crosslinked Nor-Tet hydrogels. By modifying HANor macromers with methacrylates (Me), thiolated BMP-2 …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Characterization Of In Vivo Damage On Retrieved Total Shoulder Glenoid Liners, Eric Cheatwood, Gerard Simon, Lynn Crosby, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

An attempt was made to retrieve glenoid liners from revision surgery to undertake a retrospective study to measure the resulting in vivo damage. Since the glenoid liners are circumferential, the curvature changes at every point in the component, an “assisting arm” was designed to hold the liner firmly, thus allowing accurate microscopic measurements. We characterized the damage in terms of pitting, embedded debris, complete fracture, abrasion, deformation, delamination, burnishing, grooving, and scratching that took place mutually exclusively. This study of 26 liners showed embedded debris was the most underrated damage mode found on the liners, followed by pitting and abrasion, …

Failure Detection In Deep Neural Networks For Medical Imaging, Sabeen Ahmed, Dimah Dera, Saud Ul Hassan, Nidhal Bouaynaya, Ghulam Rasool

Electrical and Computer Engineering Faculty Publications

Deep neural networks (DNNs) have started to find their role in the modern healthcare system. DNNs are being developed for diagnosis, prognosis, treatment planning, and outcome prediction for various diseases. With the increasing number of applications of DNNs in modern healthcare, their trustworthiness and reliability are becoming increasingly important. An essential aspect of trustworthiness is detecting the performance degradation and failure of deployed DNNs in medical settings. The softmax output values produced by DNNs are not a calibrated measure of model confidence. Softmax probability numbers are generally higher than the actual model confidence. The model confidence-accuracy gap further increases for …

Precision Maritime Localization And Landing With Real-Time Kinematic Gnss, Alexander Jordan, Matthew Kent Rydalch, Tim Mclain, Michael Williamson Tabango

Student Works

This paper presents a highly effective method for UAV precision shipboard localization and landing using Real-time Kinematic Global Navigation Satellite System (RTK GNSS). To assess the feasibility of RTK GNSS for this use case we explicitly exclude vision-based localization techniques which are most often presented in the literature. Instead, the methods presented in this paper use only RTK GNSS with an inertial measurement unit aboard the landing pad to estimate the state of the boat and the relative position of the UAV with respect to the boat. We use a continuous-discrete extended Kalman filter combined with a complementary filter for …

Ds-Menet For The Classification Of Citrus Disease, Xuyao Liu, Yaowen Hu, Guoxiong Zhou, Weiwei Cai, Mingfang He, Jialei Zhan, Yahui Hu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Affected by various environmental factors, citrus will frequently suffer from diseases during the growth process, which has brought huge obstacles to the development of agriculture. This paper proposes a new method for identifying and classifying citrus diseases. Firstly, this paper designs an image enhancement method based on the MSRCR algorithm and homomorphic filtering algorithm optimized by Laplacian (HFLF-MS) to highlight the disease characteristics of citrus. Secondly, we designed a new neural network DS-MENet based on the DenseNet-121 backbone structure. In DS-MENet, the regular convolution in Dense Block is replaced with depthwise separable convolution, which reduces the network parameters. The ReMish …

Advance In Contextualizing Focal Structure Sets In Complex Network Analysis, Mustafa Alassad

Theses and Dissertations

Focal Structures are key sets of individuals who may be responsible for online socially minded events, protests, or leading citizen engagement efforts on social media networks. Discovering focal structure sets who able to promote online social campaigns is important, but complex, as they are typically active locally, globally, and acting unlike central users and influencers, focal structure sets can influence large social media networks. Researchers applied a greedy algorithm to discover focal structure sets in social media networks. However, the outcomes were lacking on the users’ activities and interests that made the analysis incomplete. In this research, I present a …

Modeling Environment For Testing A Distributed Energy Resource Management System (Derms) Using Gridapps-D Platform, Shiva Poudel, Sean Keene, Roshan Kini, Sarmad Hanif, Robert B. Bass, Jaime Kolln

Electrical and Computer Engineering Faculty Publications and Presentations

The electric power system is currently undergoing a major transition due to growing numbers of distributed energy resources (DERs) and increased distribution automation. If optimally managed and operated, DERs could provide flexibility and highly valuable grid services such as restoration, peak shaving, voltage regulation, and frequency support to maintain grid reliability. Different applications and enterprises, such as distributed energy resources management systems (DERMS), are being developed for coordinated and optimal operation of DERs. However, to attract sufficient DER participation and achieve the coordinated operation of DERs, systems and components must be interoperable and information exchange must be secure. Along this …

Development Of A Configurable Real-Time Event Detection Framework For Power Systems Using Swarm Intelligence Optimization, Umar Farooq

Dissertations and Theses

Modern power systems characterized by complex topologies require accurate situational awareness to maintain an adequate level of reliability. Since they are large and spread over wide geographical areas, occurrence of failures is inevitable in power systems. Various generation and transmission disturbances give rise to a mismatch between generation and demand, which manifest as frequency events. These events can take the form of negligible frequency deviations or more severe emergencies that can precipitate cascading outages, depending on the severity of the disturbance and efficacy of remedial action schema. The impacts of such events have become more critical with recent decline in …

Construction And Operation Of A Pilot-Scale Odor Control Device, Brendan Bunker

Department of Environmental Engineering: Theses and Other Student Research

Hydrogen sulfide (H₂S) is a naturally occurring by-product of anaerobic digestion and causes an odor that can be a nuisance and a public health risk at higher concentrations. This compound can be treated through various means, but one of particular interest is a biotrickling filter (BTF). Such devices have excellent H₂S treatment efficiencies, but start-up costs can be steep. The primary goal of this study is to explain the design and operation of a low-cost odor control device for improving environmental air quality in Nebraska using a BTF. This device has the potential for application as …

Aiaa Design Build Fly Humanitarian Uav, Michael Finigian, Kyle Abbas, David Fryer, Kyle Bartholomew, Jacob Kaufman, William Ryan, Tyler Kwapniowski, Adam Witusik

Discovery Day - Prescott

Every year AIAA issues a challenge to any undergraduate universities willing to meet it: to build an unmanned aerial vehicle (UAV) designed to mission and product characteristics. This year the UAVs are to carry two different payloads in four missions with varying objectives, take-off distances, flight times and flight distances. The two payloads are large plunger syringes and mock vaccine vial packages. The Embry-Riddle Prescott team has decided that the best way to approach these competitions is to split responsibilities evenly between four integrated product teams (IPTs); Aerodynamics, Structures, Propulsion and Missions. In the early stages of the design process, …

Reconnaissance And Documentation (Rad), Cayli Farias, Terra Gordon, Sharik Joseph, Julia Kjenstad, Michael Lauber, Dakota Ross, Logan Hill, Dominick Uzzardo, Richard Harold

Discovery Day - Prescott

The Reconnaissance and Documentation (RAD) mission aims to utilize a Low Earth Orbit satellite using machine learning enabled image recognition and optical remote sensing to observe countries currently experiencing Stage Nine of the United Nations’ Ten Stages of Genocide. The primary objective of the RAD satellite, Leza, is to observe high-risk countries at adequate spatial and temporal resolutions to capture evidence of genocide. The secondary objective of Leza is to process images on-board, so flagged images serving as evidence may be distributed to proper authorities, the United Nations, and mainstream media outlets as soon as possible. Using remote sensing to …

Mybody Safety System, Diego Draguicevich, Nicholas Rodriguez

Discovery Day - Prescott

To any university, the safety of students, faculty, and staff when on campus is paramount. To enhance safety, many campuses have “safety stations” of some sort scattered throughout. However, campuses such as Embry-Riddle Prescott also have hiking trails nearby. Safety pillars on hiking trails would be prohibitively expensive to build and maintain, and would also be less useful due to a longer response time for security officers. The MyBody System seeks to resolve these issues by introducing a system which is affordable, self-enclosed, solar powered and easy to maintain. The system would achieve this via custom wireless speakers disguised as …

Thermal Analysis Of The Temperature Gradient Across Pintle Injector Face, Zoe Brand

Discovery Day - Prescott

Proper analysis of the temperature gradient across the pintle injector face is a complicated surface to acquire a reading from. Complications arise from the extreme temperatures seen on the combustion side mixed with the ambient temperatures seen on the fuel side of the injector. The orientation of temperature sensor placement is critical to mitigate hot spots and not disrupt the thermal flow through the injector face. The installment of the temperature sensors is also a critical issue since a new medium would need to be added to keep the sensor in place. The goal of this research is to figure …

Eaglenautics: Sae Aero West Design Competition Team, Steven Booth, Jessica Millard, Celin Rawther

Discovery Day - Prescott

Eaglenautics is an engineering club affiliated with Embry-Riddle Aeronautical University. Every year, Eaglenautics participates in the SAE Aero West Design Competition. This competition challenges teams to design a competitive R/C scale aircraft from the ground up. Eaglenautics tackles this challenge by using a modified design-build-fly (DBF) process by adding a simulation step after the design step. Simulation software allows for a faster convergence to a design before the build process starts. Eaglenautics utilizes simulation programs like XFLR5 and OpenVSP to aid with the design of the aircraft to save time building multiple aircraft iterations. This process is especially helpful for …

Effects Of Equivalence Ratio During Shutdown Of A Rocket Engine On Hardware Longevity, Benjamin Black

Discovery Day - Prescott

During the shutdown or purge period after firing of a rocket engine it is critical to understand what equivalence ratios are desirable and implement a shutdown sequence so that the hardware is subjected to the lowest thermal and mechanical loading. Furthermore, it is essential that hazards to the test technicians caused by this method be minimized. The initial study was conducted into combustion mechanics, to understand how the reactants would ideally behave at varying equivalence ratios and in both pre-mixed and diffusion flame combustion. Using this foundation an analytical model for a Propane-Oxygen flame was created and tested using a …

Space Debris Characterization Using Machine Learning Methods, Anson Biggs, Ana Bader-Elenes

Discovery Day - Prescott

Orbital debris is a form of pollution that is growing at an exponential pace and puts current and future space infrastructure at risk. Satellites are critical to military, commercial, and civil operations. Unfortunately, the space they occupy is increasingly becoming more crowded and dangerous, potentially leading to a cascade event that could turn orbit around the Earth into an unusable wasteland for decades proper mitigation is not introduced. Unfortunately, existing models employed by NASA rely on a dataset created from 2D images and are missing many crucial features required for correctly modeling the space debris environment. Our approach uses highresolution …

Team Keryx: Project Lifelink, Robert Belz-Templeman, Evan Hefflin, Jessica Millard, Ariana Anderson, Jacob Hindmarsh, Corey Washburn

Discovery Day - Prescott

First responders such as wildland firefighters, search and rescue crews, and disaster relief workers often operate in cellular-service-denied environments. This lack of long-range communication channels greatly inhibits the spread of vital information. Project LifeLink is Team Keryx’s capstone project designed to solve this issue as well as meeting the course goals of AE 420/421. The course goals for AE 420/421 are to utilize the skills and knowledge obtained in prior classes to design, develop, build, and test an aircraft tailored to a specific challenge. The students will work together in an organized structure and process to prepare them for industry …

An Applied Electromagnetics Course With A Conceiving-Designing-Implementing-Operating Approach In Engineering Education, M. R. Pérez-Cerquera, Hurtado Londono, Juan M. Cruz-Bohorquez

Henry M. Rowan College of Engineering Departmental Research

This paper describes and discusses the implementation of a project-based undergraduate course on applied electromagnetics in electronics engineering with a conceiving-designing-implementing-operating (CDIO) approach involving active project-based learning (PBL). The course, which requires a combination of mathematical and physics concepts for its completion, allows students to understand the principles of electromagnetic transmission theory in wireless communication systems. This paper presents the course proposal, its project description, and results hinting at the relationship with the CDIO process. The proposed projects allow students to engage in core concepts such as complex vectors, Maxwell’s equations, boundary conditions, Poynting's theorem, uniform plane waves, reflection and …

Predicting Lattice Vibrational Frequencies Using Deep Graph Neural Networks, Nghia Nguyen, Steph-Yves V. Louis, Lai Wei, Kamal Choudhary, Ming Hu, Jianjun Hu

Faculty Publications

Lattice vibrational frequencies are related to many important materials properties such as thermal and electrical conductivity as well as superconductivity. However, computational calculation of vibrational frequencies using density functional theory methods is computationally too demanding for large number of samples in materials screening. Here we propose a deep graph neural network based algorithm for predicting crystal vibrational frequencies from crystal structures. Our algorithm addresses the variable dimension of vibrational frequency spectrum using the zero padding scheme. Benchmark studies on two data sets with 15,000 mixed-structure and 35,552 rhombohedra samples show that the aggregated R2 scores of the prediction reach …

Autonomous Vehicles On The Smart Roads: Challenges And Potentials, Laura Cristancho, Baleki Campbell, Mahyar Amirgholy

The Kennesaw Journal of Undergraduate Research

Self-driving vehicles and smart roads are not new concepts. These ideas have been discussed for many years but for much of this time, the required technology was not available to make them a reality. Just recently has our technology caught up to our ideas and we are beginning to see progress towards the realization of the automated highway system. As the transition to a complete automated system is still in progress, this leaves many questions that still need to be answered as well as allowing for novel solutions to be presented. Using modern research papers to formulate a sound basis …

Proposal To Augment U.S. Army Lsa And Uars, Cameron Beard

Discovery Day - Prescott

The U.S. Army currently has a gap in its aerial reconnaissance capabilities, with the OH-58D Kiowa completing its phase transition to the AH-64E. Since the Army has done away with its rotary-wing scout aircraft, it currently relies on the AH-64E attack helicopter (an aircraft not designed for such a role), in tandem with UAS RQ- 7Bs and MQ-1C Grey Eagle. These aircraft use the MUM-T (Manned-Unmanned Teaming) system, which allows AH-64E pilots to control the camera and weaponry of the drones while both aircraft are in flight. The draw back to this system lies in two categories; 1) the inability …

Interactive Planetarium Project, Eric Babcock, Cody Park, Johann Van Hilst

Discovery Day - Prescott

The Interactive Planetarium Project will design and build the software framework for connectivity between the Digistar 6 planetarium projection software and the smartphones of all audience members in the Jim and Linda Lee Planetarium. The goal of this project is to make planetarium shows more participatory, add a feature to our planetarium shows that many other universities do not yet have, and create a framework for future students and faculty to build from. To demonstrate our technology, we will make a real-time competitive trivia game able to support 60 concurrent users (number of expected audience members in the planetarium).

The …