Engineering Commons^™

Mems 411: T-Shirt Strip Dispenser, Andrei Schwartz, Evan Dorsel, Amy Gong, Rosie Finglass

Mechanical Engineering Design Project Class

Develop a device to facilitate the t-shirt strip lay down process for Prof. Mary Ruppert-Stroescu

Mems 411: Group B Prosthetic Arm Design, Gage Fuller, Abby Jaeger, Oliver Reid, Max Gordon

Mechanical Engineering Design Project Class

Design a custom prosthetic arm for a customer who is missing her arm two inches past her elbow. Introduce mobility so that she can utilize the arm to perform more everyday tasks than she was able to before with her immobile arm.

Mems 411: The Rock Collecting Rover Design Project, Henry Collins, Sam Mattecheck, Connor Burke

Mechanical Engineering Design Project Class

The rock collecting over project challenged groups to construct a small,, remote controlled rover that is able to move and collect dice.

Mems 411: Air Capture Dynamic Seal, Erik Truitt, Thomas Rexing, Cole Kelez, Hernan Perez

Mechanical Engineering Design Project Class

For the DAC (direct air capture) machine, a CO₂ collecting machine, it needs a seal that allows rotation while still being airtight. Currently, a liquid seal is used but is having issues with contamination and evaporation.

Mems 411: Dynamic Seal, Devin Fredericks, Abdul Majeed Lalani, Matthew Schmidt, Edward Tinnemeyer

Mechanical Engineering Design Project Class

The purpose of this design project is to design a dynamic seal to be used on AirCapture’s carbon capture machine. The task is to create an air-tight seal between the top and bottom halves of AirCapture’s carbon capture machine. The seal needs to be capable of periodically rotating and must not leak while in operation.

Exploring The Effects Of Meaningful Tactile Display On Perception And Preference In Automated Vehicles, Kimberly D. Martinez, Gaojian Huang

Mineta Transportation Institute

There is an existing issue in human-machine interaction, such that drivers of semi-autonomous vehicles are still required to take over control of the vehicle during system limitations. A possible solution may lie in tactile displays, which can present status, direction, and position information while avoiding sensory (e.g., visual and auditory) channels overload to reliably help drivers make timely decisions and execute actions to successfully take over. However, limited work has investigated the effects of meaningful tactile signals on takeover performance. This study synthesizes literature investigating the effects of tactile displays on takeover performance in automated vehicles and conducts a human-subject …

Pruning The Communication Bandwidth Between Reinforcement Learning Agents Through Causal Inference: An Innovative Approach To Designing A Smart Grid Power System, Xianjie Zhang, Yu Liu, Wenjun Li, Chen Gong

Research Collection School Of Computing and Information Systems

Electricity demands are increasing significantly and the traditional power grid system isfacing huge challenges. As the desired next-generation power grid system, smart grid can providesecure and reliable power generation, and consumption, and can also realize the system’s coordinatedand intelligent power distribution. Coordinating grid power distribution usually requiresmutual communication between power distributors to accomplish coordination. However, the powernetwork is complex, the network nodes are far apart, and the communication bandwidth is oftenexpensive. Therefore, how to reduce the communication bandwidth in the cooperative power distributionprocess task is crucially important. One way to tackle this problem is to build mechanismsto selectively send out …

Sme Coffee Hour: Human Factors: Dirty Dozennorms And Complacency, Linda Vee Weiland

Publications

Presentation about the relevance between communication, language, complacency and norms related to flight safety.

Permeable Curbs For Storm Water Pollution, Aldo Hernandez, Drew Johnson, Marcio Giacomoni

Publications

One of the problems that increased urbanization poses is storm water pollution. Several control measures exist that are used to treat and reduce pollution in our waterways, one of those being permeable concretes; but these have not been widely adopted. The goal of this project was to develop a permeable curb apparatus that could be used in retrofitting conventional streets. The permeable curb is comprised of a permeable concrete mix with a perforated pipe running through its center, this allows for water to filter through the porous concrete and continue downstream through the perforated pipe which would eventually lead to …

Quantum Algorithm For Variant Maximum Satisfiability, Abdirahman Alasow, Peter Jin, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

In this paper, we proposed a novel quantum algorithm for the maximum satisfiability problem. Satisfiability (SAT) is to find the set of assignment values of input variables for the given Boolean function that evaluates this function as TRUE or prove that such satisfying values do not exist. For a POS SAT problem, we proposed a novel quantum algorithm for the maximum satisfiability (MAX-SAT), which returns the maximum number of OR terms that are satisfied for the SAT-unsatisfiable function, providing us with information on how far the given Boolean function is from the SAT satisfaction. We used Grover’s algorithm with a …

Multi-Tasking Memcapacitive Networks, Dat Tran, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Recent studies have shown that networks of memcapacitive devices provide an ideal computing platform of low power consumption for reservoir computing systems. Random, crossbar, or small-world power-law (SWPL) structures are common topologies for reservoir substrates to compute single tasks. However, neurological studies have shown that the interconnections of cortical brain regions associated with different functions form a rich-club structure. This structure allows human brains to perform multiple activities simultaneously. So far, memcapacitive reservoirs can perform only single tasks. Here, we propose, for the first time, cluster networks functioning as memcapacitive reservoirs to perform multiple tasks simultaneously. Our results illustrate that …

Histomechanical Compatibility Of Coronary Artery Bypass Grafts, Colton J. Kostelnik

Theses and Dissertations

Coronary artery disease is a localized form of atherosclerosis that can severely restrict blood flow to the heart often requiring a surgical intervention known as coronary artery bypass grafting (CABG) to reestablish perfusion to this essential circulation. To some extent, the selection of the autograft tissue is at the surgeon’s discretion with factors such as stenosis location and the existing tissue’s pathological state contributing to a choice that could be deterministic in surgical outcomes. Many post-operative complications and premature graft failures originate from graft-target tissue incompatibilities and altered blood flow patterns. We hypothesize that mechanical mismatching between the graft material …

Experimental Investigations Of Yarn Pull-Out Behavior In Kevlar®: Influence Of Applied Metallic Coatings And Effect Of Dynamic Loading, Julie Ann Roark

Theses and Dissertations

Flexible woven Kevlar® textile fabrics are widely used in protective armor applications. Yarn pull-out, comprised of yarn uncrimping (i.e., straightening) and yarn translation, is a major energy absorption mechanism during ballistic impact onto these fabrics, especially for impact velocities below the ballistic limit. Yarn pull-out is influenced by various parameters including inter-yarn friction, pull-out distance, pull-out velocity, transverse pre-tension, fiber diameter, fabric architecture, fabric waviness, fabric count and yarn modulus.

The first part of this thesis investigates yarn pull-out behavior of commercially available Kevlar® KM2+ individual yarns coated with metallic layers (copper, aluminum, aluminum nitride, silver) via a directed vapor …

High-Throughput Computation Of Interfacial Thermal Management Of Wide-Bandgap Semiconductors, Hao-Wen Chen

Theses and Dissertations

As semiconductor electronics, in particular high electron mobility transistors, get hot in operation, people are trying to incorporate different semiconductor materials to solve the problem of heat dissipation to maintain the device efficiency and performance. In this master thesis, two different packages, LAMMPS and almaBTE, that are focusing on micro-scale and atomic scale respectively, are used to simulate the heat transfer process across interfaces in two different scales. In the LAMMPS simulation, the research is exploring how the location of atoms and the thickness of interfacial layers will influence the interfacial thermal conductance. On the other hand, using the almaBTE …

Uncrewed Aircraft Systems For Autonomous Infrastructure Inspection, Michail Kalaitzakis

Theses and Dissertations

Uncrewed Aircraft Systems (UAS) are becoming increasingly popular for infrastructure inspections since they offer increased safety, decreased costs and consistent results, compared to traditional methods. However, there are still many open challenges before fully autonomous, reliable, and repeatable UAS inspections. While a UAS platform has increased mobility and can easily approach hard to reach areas, it has limited range and payload capacity and is susceptible to environmental disturbances. Therefore, current operations are limited to Visual Line of Sight (VLOS) manual inspections that usually result in just a qualitative (visual) assessment of the structure.

The objective of this work is to …

Decellularization Strategies Of Naturally Derived Biomaterials For Tissue Engineering Applications, Julia Elizabeth Hohn

Theses and Dissertations

In 2017, over 3.5 million peripheral vascular surgeries were performed worldwide with over 400,000 vascular repair or replacement surgeries being performed in the United States each year alone. As the number of vascular repair surgeries, including both coronary and peripheral bypass grafting procedures, continues to increase each year, these statistics indicate an urgent need for more effective and readily available replacement materials. Regenerative medicine and tissue engineering (TE) approaches, including the design, fabrication, and validation of suitable biomaterials in vitro that direct the repair and regeneration of damaged tissues, have been proposed to alleviate this problem. While advanced biomaterials have …

Durability Enhancement Of Anion Exchange Membrane Based Fuel Cells (Aemfcs) And Water Electrolyzers (Aemels) By Understanding Degradation Mechanisms, Noor Ui Hassan

Theses and Dissertations

The past several years have seen remarkable progress in renewable energy sources such as solar and wind, showing excellent efficiency and significant cost reduction. The intermittent nature of renewable resources requires them to be integrated with energy storage systems that can hold or convert this excess energy into other forms. Though batteries have been the most popular, it is also possible to store the energy as chemicals and fuels, such as hydrogen (H₂). Hydrogen generation from water electrolysis has been receiving significant attention in recent years. Among the existing water electrolysis technologies, anion exchange membrane electrolyzers (AEMELs) are …

Fabrication Of Asymmetrical Hollow Fiber-Supported Thin Film Membranes, Stack Assembly, And Accelerated Long-Term Stability Test For Oxygen Production From Air, Myongjin Lee

Theses and Dissertations

Air separation is a widely used process for oxygen production. Several separation technologies have been developed for air separation, including cryogenic distillation, swing adsorption, redox process of metal oxides, and electrochemical process. Among these technologies, electrochemical permeation process stands out as a cost-effective and simple process for pure oxygen production from air. The electrochemical permeation process employs a gas-tight membrane to permeate and separate oxygen from air directly, where the membrane conducts both ions and electrons simultaneously. Different membrane designs have been studied to obtain the improved performance for oxygen permeation, typically planar and tubular designs. Among these membrane configurations, …

Shear Localization In The Metallic Nanolayered Composites, Shujing Dong

Theses and Dissertations

In this dissertation, the influences of layer thickness (h), interface orientation relationship (OR) and dislocation slip activities on shear band (SB) formation mechanisms was investigated by means of molecular dynamics (MD) simulations.

The effect of h and dislocation slip systems on the shear localization in Cu-FCC/Nb-BCC MNCs was studied. The strain softening observed in those samples was triggered by the SB formation. The microstructure evolutions and dislocation slips revealed that the unsymmetrical dislocation transmission across the interface induces the shear localization and promotes the SB formation. The quantitative analysis of the change in the separation distance of initially …

Cnn-Based Dendrite Core Detection From Microscopic Images Of Directionally Solidified Ni-Base Alloys, Xiaoguang Li

Theses and Dissertations

Dendrite core is the center point of the dendrite. The information of dendrite core is very helpful for material scientists to analyze the properties of materials. Therefore, detecting the dendrite core is a very important task in the material science field. Meanwhile, because of some special properties of the dendrites, this task is also very challenging. Different from the typical detection problems in the computer vision field, detecting the dendrite core aims to detect a single point location instead of the bounding-box. As a result, the existing regressing bounding-box based detection methods can not work well on this task because …

Physico-Mechanical Characterization Of Prototype Earth Block Material For Constitutive Modeling, Erika Lorena Rengifo-López

Theses and Dissertations

The comprehensive understanding and experimental characterization of the overall compressive behavior of earth masonry block materials, such as compressed and stabilized earth blocks (CSEBs), are essential for developing analytical and numerical tools to predict the mechanical response and designing earth masonry structures. Furthermore, advancing the understanding of the extent of the influence of testing parameters on the material's response, such as specimen geometry, is a critical step towards standardization.

CSEBs are produced by compressing a mixture of soil, water, and a stabilizer (e.g., Portland cement). The heterogeneity of the material accrues from the variety of soil particle morphology and potential …

Guidelines For Fabricating Highly Efficient Perovskite Solar Cells With Cu2o As The Hole Transport Material, Sajid Sajid, Salem Alzahmi, Imen Ben Salem, Ihab M. Obaidat

All Works

Organic hole transport materials (HTMs) have been frequently used to achieve high power conversion efficiencies (PCEs) in regular perovskite solar cells (PSCs). However, organic HTMs or their ingredients are costly and time-consuming to manufacture. Therefore, one of the hottest research topics in this area has been the quest for an efficient and economical inorganic HTM in PSCs. To promote efficient charge extraction and, hence, improve overall efficiency, it is crucial to look into the desirable properties of inorganic HTMs. In this context, a simulation investigation using a solar cell capacitance simulator (SCAPS) was carried out on the performance of regular …

A Mathematical Model For The Energy Stored In Green Roofs, Maria Aguareles, Marc Calvo-Schwarzwalder, Francesc Font, Timothy G. Myers

All Works

A simple mathematical model to estimate the energy stored in a green roof is developed. Analytical solutions are derived corresponding to extensive (shallow) and intensive (deep) substrates. Results are presented for the surface temperature and energy stored in both green roofs and concrete during a typical day. Within the restrictions of the model assumptions the analytical solution demonstrates that both energy and surface temperature vary linearly with fractional leaf coverage, albedo and irradiance, while the effect of evaporation rate and convective heat transfer is non-linear. It is shown that a typical green roof is significantly cooler and stores less energy …

Nanotechnology As Building Materials And Its Impact On The Quality Of Residential Buildings, Shekha Alrasheed, Hatem El Shafie

Mansoura Engineering Journal

A modern technology called "nanotechnology" has emerged that seeks to environmental design through the use of new technologies and advanced scientific methods in the construction of contemporary architectural edifices. The research problem is the underutilization of nanotechnology in building materials for residential buildings due to the lack of knowledge of the benefits and cost of this technology. The importance of the study lies in the use of building materials based on nanotechnology with new properties and high performance that address the problems in current building materials so as to apply sustainability standards and provide efficiency for residential buildings to suit …

Pulse Width Modulation-Based Voltage Balancing And Circulating Current Control For Modular Multilevel Converters, Md Multan Biswas

Theses and Dissertations

In the last decade, because of some key features and advantages of Modular Multilevel Converter (MMC), it is widely applied for various Medium Voltage (MV) and High Voltage (HV) power electronic interfacing applications. The structure of MMCs varies by application but in general, they are composed of multiple Sub-Modules (SMs) which each contains a floating capacitor. For the operation of MMCs, capacitor voltages are required to remain equally set. This is referred to as the balanced condition and requires a method for SM Capacitor Voltage Balancing (CVB). Connections of SMs for most of the common MMC configurations result in additional …

Liquid Phase Modeling In Metal Catalysis And In Zeolites, Subrata Kumar Kundu

Theses and Dissertations

Liquid phase processing is often desired for selective product formation, such as during catalytic conversion of biomass, and for purification of waste-water streams. Since the liquid phase environment influences the adsorption properties and reactivity of solid catalysts and porous materials, significant performance changes have been observed as a function of solvent properties for various industrial catalytic and separation processes. There is a need to better understand these solvation effects on processes at solid-liquid interfaces and to develop novel multiscale models that permit one to explore solvation effects on surface catalyzed reactions and during adsorption in porous media such as zeolites. …

Thermodynamic Assessment Of Chromium Corrosion In The Na-K-Mg-U(Iii, Iv) Chloride Salt, Jacob Allen Yingling

Theses and Dissertations

Thermodynamic descriptions of high-order molten chloride salt systems are essential for the development of fast molten salt reactor (MSR) technologies. However, a complete thermodynamic assessment of the essential Na-K-Mg-U(III)-U(IV) molten chloride salt with the most prevalent CrCl2 corrosion product has yet to be provided. This is remedied in the present work through application of the CALculation of PHAse Diagrams (CALPHAD) approach to the available thermodynamic data and new measurements that include differential scanning calorimetry (DSC) observations for previously unexplored two and three component chloride salt systems. Through these efforts, a unique approach was developed for the quantification of uncertainty in …

Use Of Dic Measurements With Finite Element Models For Direct Heterogeneous Material Property Determination And Wrinkle Formation During Automated Fiber Placement, Sreehari Rajan Kattil

Theses and Dissertations

In this work, application of DIC in combination with finite element modeling is demonstrated for efficient material characterization for complex heterogeneous materials and tow wrinkle formation during automated fiber placement.

The first part of the work describes the integration of DIC measurements with finite element models for direct property identification in heterogeneous material systems. The material property identification is based on solving partial differential equations (PDE) of equilibrium for unknown elastic material properties with known boundary conditions and full field strain data (Eg. DIC). The PDEs are solved numerically using Petrov-Galerkin finite element procedure. The classical Bubnov-Galerkin method is shown …

Closed Form Implicitly Integrated Models For Computationally Efficient Simulation Of Power Electronics, Andrew Wunderlich

Theses and Dissertations

This work describes novel closed-form, implicitly integrated (CF-implicit) models of switched-mode power converters which feature implicit integration but require no iterative numerical solving algorithm for evaluation because they are explicitly solved prior to model execution. The derived models capture the large-signal dynamic behavior of the power converters, so their use and accuracy are not limited to any one set of operating conditions. These models can be implemented in any computational environment, including directly on an existing embedded controller as a digital twin. Since no iterative solver is required, the models are highly computationally efficient and have a very predictable worst-case …

Cyclic Response And Liquidfaction Behavior Of Gravelly Soils, Pitak Ruttithivaphanich

Theses and Dissertations

Cyclic response and liquefaction behavior are soil mechanisms under earthquake conditions. The study of dynamic soil response is important to evaluate soil behaviors under dynamic loading for a wide range of strains. Soil liquefaction phenomena involving a significant reduction in the strength and stiffness of saturated cohesionless soils has caused catastrophic ground failure in numerous earthquakes. Liquefaction mostly occurs in sand, but liquefaction of gravelly soil has been observed. To date, only a few studies have focused on the liquefaction of gravelly soils; hence, research data is limited. This research aims to improve the understanding of cyclic response and liquefaction …