Engineering Commons^™

Water Hardness Removal By Electrochemical Precipitation In A Continuous Flow Condition Using Conductive Concrete As Cathode, Tahsin Tareque

Theses and Dissertations

This study focuses on the electrochemical precipitation (EP) process to reduce excess water hardness from the Lower Rio Grande Valley (LRGV) tap water using electrically conductive concrete as cathode in a continuous flow condition. LRGV tap water is extremely hard with hardness more than 350 mg/L as CaCO3. Humans can pleasantly consume water with hardness less than 150 mg/l as CaCO3 according to World Health Organization (WHO). Hard water is also known to cause mechanical problems to boilers and heat exchangers. In this process, electricity is passed through electrodes submerged in electrolyte, which causes an alkaline environment around the cathode …

Development Of An Electro-Centrifugal Spinning Setup For Nanofiber Production Research, David A. Treviño

Theses and Dissertations

Nanofiber production methods have been developed and improved over the course of decades. Each process allows for the creation of fibers with distinct properties that provide benefits to growing number of applications. On the same note, every process has shortcomings that keep them from being universally valid for all applications. This research considers electrospinning and centrifugal spinning systems and attempts to create a process which maintains high fiber qualities like small and consistent fiber diameters, and improved fiber alignment while providing a high fiber yield. The electro-centrifugal (EC) spinning machine that resulted was designed utilizing computer aided design (CAD) software …

Feasibility Analysis Of Embedding Optical Fiber Sensor Into Additively Manufactured Part, Mahmudul Hasan Porag

Theses and Dissertations

The research tried to examine the viability of the embedment of optical fiber sensors in Additively built components, packaging the sensors within the components, and characterizing the sensors for sensing a specified measurement. Optical fiber sensors are popular due to their small size, resilience against electromagnetic radiation, and reliability in potentially dangerous conditions. Embedding fibers inside a product allows for the monitoring of critical areas, allowing for preemptive action in the case of a breakdown. Coupons of Inconel 718 were made using laser powder-bed fusion (LPBF), with the fabrication settings tuned to determine whether such a development was possible. After …

Simncore: Multilevel Cache Memory Design Simulator For Manycore System, Provashish Roy

Theses and Dissertations

The current trend in a processor design has moved from multicore to manycore (tens to hundreds, or more cores) to support more computational power based on parallelism. One of challenges is how to handle such large number of cores’ data in cache memories through an efficient inter-core communication and cache coherence. To meet the demand, this paper presents a manycore cache memory simulator for research and education purposes. The proposed simulator, called as SIMNCORE, is to design and evaluate various multi-level, such as L1 and L2, cache memories for manycore processing. The SIMNCORE will implement various trace files collected from …

Enhancing Human Schwann Cells Reparative Behavior Using Heparin/Collagen Layer-By-Layer Coatings, Luis Carlos Pinzon-Herrera

Graduate Theses and Dissertations

When a peripheral nerve injury (PNI) occurs, the gold standard for tissue regeneration is the use of autografts. However, due to the secondary effects produced by multiple surgeries involved in the removal and implantation of autografts for very small lesions, it is possible to replace them with the use of Nerve Guide Conduits (NGCs). However, NGCs are limited to short lesions (less than 1 cm). This limitation is caused by the absence of compounds in the extracellular matrix (ECM) that autografts can provide. Since much of the regenerative process takes place on the NGC surface, our work aims to modify …

Integrating Model-Based Systems Engineering Industry Transformations For Workforce Development, Wilma Analisa Ankobiah

Theses and Dissertations

This study explores whether MBSE industry workforce requirements are being satisfied by the academic curricula of US institutions. Using an industry survey, which is highlighted in Chapter 3, identifies the existing perception of MBSE from various industries and explores the MBSE needs of professionals, such as tools concepts and languages. It examines how industry professionals perceive MBSE, the advantages and challenges of MBSE use and the preferred MBSE tools, languages and knowledge of concepts deemed necessary to ensure project success in the respective industry sectors. Results of phase 1 industry survey will summarize the current MBSE concepts, tools and languages …

Recycling Of Cured Carbon Fiber/Epoxy Resin Laminated Composites Scraps: Processing And Characterization, Khaled Mohammed Al Harmoodi

Theses

The concept of reinforced composites came decades ago from the need to fabricate high-strength, heat-resistant, wear-resistant, and low-density materials. The polymer matrix composites offer a wide range of applications due to the collaborative nature of the functional fillers and polymers present. Towards the twenty-first century, the aviation industry flourished due to flying being the preferred way of travel across states and countries. With such a massive demand for air transport, there is an equally parallel demand for the production of aircraft components. This study aims to reuse the waste of uncured composite prepreg scraps from the ply-cutting manufacturing process in …

Synthesis And Characterization Of Vo2 Thin Films On Piezoelectric Substrates, Samee Azad

All Theses

Polycrystalline VO₂ thin films synthesized on two piezoelectric substrates (AT-cut quartz and GaN/AlGaN/GaN/Si) using low pressure direct oxidation technique have been characterized and compared to VO₂ grown on traditional non-piezoelectric substrates sapphire and SiO₂/Si. X-ray diffraction and atomic force microscopy characterization performed on the as grown films confirmed high quality of the VO₂ films grown on both the piezoelectric and non-piezoelectric substrates. Changes in material properties associated with the semiconductor metal transition (SMT) of the VO₂ films were investigated through resistivity and transmitted optical power changes measured across the SMT. It was observed that …

Supporting Us Army Next-Generation Ground Vehicle Simulation Modeling Using An Integrated Ontology Suite, Edward Louis

All Theses

The development of the US Army’s next-generation of ground vehicle systems is supported by simulations that predict vehicle performance and inform engineering design choices in the design and acquisition process. In this paper, we describe the development of an Integrated Ontology Suite to support modeling and simulation of next generation military ground vehicles. The ontology suite is intended to address model reuse challenges and increase the shared understanding of ground vehicle system simulations. It is intended to function in a Model Library structure that stores, documents, assembles, and executes vehicle simulations. The ontology suite consists of four domain ontologies: Vehicle …

Effects Of Polymer Side-Group Size On Interfacial Mechanics Of Graphene-Polymer Nanocomposites, Grace Brokaw

All Theses

Graphene-reinforced polymer nanocomposites possess excellent mechanical, thermal, and electrical properties, which make them promising candidates for various applications. Favorable interfacial interactions and mechanics between graphene sheets and polymer matrices are often essential to achieve superior mechanical properties. Nevertheless, it remains largely elusive how molecular features of polymer systems, particularly the side-group size of polymer chains, affect the interfacial mechanics between graphene sheets and polymer matrices, primarily due to challenges in well controlling these features in experiments. On the other hand, exploring their roles in the mechanical properties of graphene-polymer nanocomposites is very expensive to study with all-atomistic molecular dynamics (MD) …

Flexural Testing Of Precast Reinforced Concrete Bridge Slabs, Evaluation Of Deterioration And Strengthening Applications, Alyssa Leaman

All Theses

This thesis investigates the strength of flat precast concrete slabs that were taken from decommissioned South Carolina bridges. The specimens tested spanned 14 ft (4.3 m) or 15 ft (4.6 m), were 5 ft (1.5 m) or 5.5 ft (1.7 m) wide, and 8.25 in (210 mm) thick. In South Carolina, there are approximately 3000 similar bridges that use these slab members. Testing was conducted to determine the flexural capacity of “typical” slabs and the residual strength of slabs having visible deterioration of both the rebar and the concrete. For the slabs that were load rated below the new standards, …

Utilizing Systematic Design And Shape Memory Alloys To Enhance Actuation Of Modular High-Frequency Origami Robots, Jessica M. Den Haese

All Theses

Shape memory alloys (SMAs) describe a group of smart metallic materials that can be deformed by external magnetic, thermal, or mechanical influence and then returned to a predetermined shape through the cycling of temperature or stress. They have several advantages, such as having excellent mechanical properties, being low cost, and being easily manufactured, while also providing a compact size, completely silent operation, high work density, and requiring less maintenance over time. SMAs can undergo sold-to-solid phase transformations, and it is because of these phase transformations that they can experience shape memory effect (SME); or the ability to recover from a …

Flexural Bond Strength Of Masonry Assemblies With Lightweight Grout, Benjamin L. Hiner

All Theses

Lightweight grout has many potential benefits in masonry construction, including minimizing mass, improving thermal performance, and potentially reducing shrinkage cracking via internal curing. However, insufficient testing of masonry assemblies with lightweight grout has been conducted to suggest appropriate design modification factors akin to the lambda factor in ACI 318-19. The objective of this paper is to study the tensile bond behavior of masonry assemblies grouted with lightweight grout and to suggest appropriate equations for predicting design capacity. A moment couple test is designed specifically for grouted masonry assemblies and has additional capacity compared to the traditional ASTM 1072 bond wrench …

Transforming Character Faces Based On Perceived Personality Traits, Kara Porter

All Theses

The ability to read other human's faces is a crucial part of everyday life. Subconsciously, the human brain analyzes someone's face within the first few seconds of seeing it, making a variety of conclusions ~\cite{FacePerp} such as gathering information about emotional state and assuming character traits this person might possess. The purpose of this thesis is to create a tool that allows a user to alter features of a character's three dimensional (3D) face mesh to look increasingly or decreasingly like the character possesses certain personality traits. Using a sample set of randomly generated faces, a survey is conducted to …

Oam-Based Wavelets In A High Speed Optical Probing System For Measuring The Angular Decomposition Of The Environment, Justin Free

All Theses

This thesis presents the theoretical development of orbital angular momentum (OAM) based wavelets for the analysis of localized OAM information in space. An optical probing system for generating and detecting these wavelets is demonstrated; individual wavelets can scan the environment in 10µs or less. The probing system was applied to a three-dimensional atmospheric turbulence distribution to obtain a continuous wavelet transform of the angular information of the turbulent propagation path about a fixed radius. An entire continuous wavelet transform was measured in 3.8ms; the measurements are much faster than the turbulence and give insight into the short time scale of …

An Application Of Optimized Bistable Laminates As A Low Velocity, Low Impact Mechanical Deterrent, Graham Lancaster

All Theses

This research considers the problem of using bistable laminates as a mechanical deterrent to the impending impact of a particle. The structure will be controlled through an algorithm that will utilize piezoelectric devices to activate them in unison with the bistable laminate to successfully deter. A novel experimental setup will be constructed to ensure that the bistable laminate stays fixed when acting as a mechanical deterrent. Piezoelectricity is the main driving force of the bistable laminate to morph and this study will use a Macro Fiber Composite (MFC) actuator that contains piezoelectric ceramic rods in a patch to transfer electrical …

Mango Surface Color Features Measurement Using Digital Image Processing, Md Towfiqur Rahman, Goutom Kumar, Md Abdul Momin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Summary

Postharvest processing of agricultural produce is still done the conventional way in Bangladesh. Manual grading of agricultural produce, especially fruits and vegetables, is laborious and costly due to acute shortage of labor during the peak season, as well as difficulty maintaining the product quality. Machine vision system (MVS) applications are widely used nowadays as a non-destructive and cost-effective technology for automatically grading and sorting large volumes of produce in the packing house according to size, shape, color, texture, and surface defects. In this study, a simple MVS was constructed measuring different color features of mango fruit surface as a …

Framework For The Use Of Extended Reality Modalities In Aec Education, Barbara Oliveira Spitzer, Jae Hoon Ma, Ece Erdogmus, Ben Kreimer, Erica Ryherd, Heidi Diefes-Dux

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The educational applications of extended reality (XR) modalities, including virtual reality (VR), augmented reality (AR), and mixed reality (MR), have increased significantly over the last ten years. Many educators within the Architecture, Engineering, and Construction (AEC) related degree programs see student benefits that could be derived from bringing these modalities into classrooms, which include but are not limited to: a better understanding of each of the subdisciplines and the coordination necessary between them, visualizing oneself as a professional in AEC, and visualization of difficult concepts to increase engagement, self-efficacy, and learning. These benefits, in turn, help recruitment and retention efforts …

High Throughput And Highly Controllable Methods For In Vitro Intracellular Delivery, Justin Brooks, Grayson Minnick, Prithvijit Mukherjee, Arian Jaberi, Lingqian Chang, Horacio D. Espinosa, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

In vitro and ex vivo intracellular delivery methods hold the key for releasing the full potential of tissue engineering, drug development, and many other applications. In recent years, there has been significant progress in the design and implementation of intracellular delivery systems capable of delivery at the same scale as viral transfection and bulk electroporation but offering fewer adverse outcomes. This review strives to examine a variety of methods for in vitro and ex vivo intracellular delivery such as flow-through microfluidics, engineered substrates, and automated probe-based systems from the perspective of throughput and control. Special attention is paid to a …

Using Food-Industry Byproduct To Treat Expansive Clay, Nicole L. Shaw

Boise State University Theses and Dissertations

Lime stabilization has proven to be a valuable method in improving the properties of expansive clays under light structures such as those in transportation projects where ground improvement methods are often necessary over a large area. Hydrous and quick lime products are also utilized in various types of food processing operations to remove impurities from agricultural products. During this purification, waste is produced consisting of precipitated calcium carbonate, organic debris, and trace amounts of soil and agricultural contaminants. This food-processing waste typically contains commercially available unspent lime products, which are still viable for construction applications. Hence, this type of waste …

Nucleation And Growth Of Molybdenum Disulfide Grown By Thermal Atomic Layer Deposition On Metal Oxides, Jake Soares, Steven Letourneau, Matthew Lawson, Anil U. Mane, Yu Lu, Yaqiao Wu, Steven M. Hues, Lan Li, Jeffrey W. Elam, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

To enable greater control over thermal atomic layer deposition (ALD) of molybdenum disulfide (MoS₂), here we report studies of the reactions of molybdenum hexafluoride (MoF₆) and hydrogen sulfide (H₂S) with metal oxide substrates from nucleation to few-layer films. In situ quartz crystal microbalance experiments performed at 150, 200, and 250 °C revealed temperature-dependent nucleation behavior of the MoF₆ precursor, which is attributed to variations in surface hydroxyl concentration with temperature. In situ Fourier transform infrared spectroscopy coupled with ex situ x-ray photoelectron spectroscopy (XPS) indicated the presence of molybdenum oxide and molybdenum oxyfluoride …

2022 Summer-Fall Graduate Recognition Program, Propulsion Research Center, Robert Frederick

PRC Graduate Recognition

This program includes the graduate recognition program for summer and fall 2022. Includes photographs, upcoming events, recent publications, and student profiles.

Formative Assessment In Engineering Education: Exploring Ways To Enhance Students' Learning Achievement, Assad Iqbal

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Formative assessments have been found to enhance students’ learning across a variety of disciplines, educational levels, and laboratory and classroom settings. Research attributes the positive effects of formative assessments in improving students’ learning to its (backward and forward) testing effects. Moreover, formative assessments provide an extra opportunity to students to assess their learning early in the learning process, reflect on their learning, and identify address learning gaps and misconceptions (if any) using feedback.

However, optional nature of formative assessments and having no stakes associated with them to have any bearing on final grades offers two challenges to capitalize on their …

An Overview Of Bidirectional Electric Vehicles Charging System As A Vehicle To Anything (V2x) Under Cyber–Physical Power System (Cpps), Onur Elma, Umit Cali, Murat Kuzlu

Engineering Technology Faculty Publications

Nowadays, EVs are rapidly increasing in popularity, and are accepted as the vehicles of the future all over the world. The most important components are their battery and charging systems. The energy capacity of EVs’ batteries has a significant potential to supply different energy requirements. Therefore, EVs must be designed in accordance with bidirectional power flow, and Electric Vehicle Supply Equipment (EVSE) should be upgraded as Electric Vehicle Power Exchange Equipment (EVPE). This power exchange infrastructure can be called Vehicle-to-Anything (V2X). V2X will also be the key solution for energy grids of the future that will turn into a much …

Dual-Band Circularly Polarized Shared Aperture Antenna For Cubesat Communication System, Syed Salman Kabir

Graduate Theses and Dissertations (2019 - present)

For space exploration, a special class of small satellite known as CubeSat, has become popular in academia and industry in recent years. Due to its low cost and short development time, researchers prefer CubeSat over large-scale satellites wherever possible. In academia, CubeSat has major applications in the field of space atmosphere, space-to-ground communication, weather forecasting, etc. Like other spacecrafts, CubeSat uses multiple antennas in different frequency bands to establish a communication link with ground stations. Recent CubeSat missions are generating a large amount of data which cannot be downlinked using conventional antennas. The demand for a compact antenna system that …

Anion Alloying Of Iii-V Semiconductors For Water Splitting., Sonia Calero-Barney

Electronic Theses and Dissertations

The challenge of solar energy conversion and storage translates into the discovery and development of semiconductor materials that can transform sunlight energy into electricity and/or high-energy-density fuels in a cost-effective way. From the solar energy conversion perspective, cation-alloyed III-V solar cells hold record-breaking energy conversion efficiencies, while anion-alloyed III-V’s are particularly interesting for photoelectrochemical hydrogen generation. The major challenge for the adoption of III-V-based technologies lies in the high manufacturing costs of established synthesis techniques and the difficulty to control the composition of ternary alloys. One of the materials investigated in this work is GaSb_zP_1-z. Thermodynamic …

Nonlinear Observers For Burning Zone Temperatures And Torque Estimation Of The Rotary Cement Kiln., Bhagyashri Aditya Bhagwat

Electronic Theses and Dissertations

Due to consistent expansion in the infrastructure and housing sectors worldwide have given a new way for the rapid growth of global cement market. Increased global demand for the cement production makes the attractive research topic which can lead to the quality and overall efficiency of the product. Measurement of the temperature in the burning zone is vital to maintain product quality and kiln efficiency in the cement industry. Often the BZT is un-measurable due to internal kiln conditions, dusty environment, extreme heat, harshness for example and this leads to kiln not being driven as efficient as possible. Multi-physics tools …

Design, Evaluation, And Control Of Nexus: A Multiscale Additive Manufacturing Platform With Integrated 3d Printing And Robotic Assembly., Danming Wei

Electronic Theses and Dissertations

Additive manufacturing (AM) technology is an emerging approach to creating three-dimensional (3D) objects and has seen numerous applications in medical implants, transportation, aerospace, energy, consumer products, etc. Compared with manufacturing by forming and machining, additive manufacturing techniques provide more rapid, economical, efficient, reliable, and complex manufacturing processes. However, additive manufacturing also has limitations on print strength and dimensional tolerance, while traditional additive manufacturing hardware platforms for 3D printing have limited flexibility. In particular, part geometry and materials are limited to most 3D printing hardware. In addition, for multiscale and complex products, samples must be printed, fabricated, and transferred among different …

The Role Of Mri In Diagnosing Autism: A Machine Learning Perspective., Yaser Elnakieb

Electronic Theses and Dissertations

There is approximately 1 in every 44 children in the United States suffers from autism spectrum disorder (ASD), a disorder characterized by social and behavioral impairments. Communication difficulties, interpersonal difficulties, and behavioral difficulties are the top common symptoms. Even though symptoms can begin as early as infancy, it may take multiple visits to a pediatric specialist before an accurate diagnosis can be made. In addition, the diagnosis can be subjective, and different specialists may give different scores. There is a growing body of research suggesting differences in brain development and/or environmental and/or genetic factors contribute to autism development, but scientists …

Wet Chemical Synthesis And Properties Of Argyrodite Sulfide Solid Electrolytes For Solid State Lithium Batteries., William Arnold

Electronic Theses and Dissertations

The commercialization of the lithium-ion battery (LIB) in 1991 was responsible for the explosion in portable electronic technologies that has been seen over the past 30 years. With the advent of electric vehicles and other high-powered technologies, there is tremendous demand for LIBs with higher energy density and high safety. To achieve this, new electrode materials must be explored. The obvious choice of anode material would be pure metal lithium, which has a theoretical specific capacity of 3860 mAh g^-1 . Unfortunately, metal lithium anodes have not been widely commercialized due to their tendency to react violently with the …