Engineering Commons^™

Shock Wave Formation From Head-On Collision Of Two Subsonic Vortex Rings, Rachel L. Bauer, Cody J. Thomas, Everett V.P. Baker, Emily M. Johnson, Kelly R. Williams, Martin J. Langenderfer, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Vortex ring collisions have attracted intense interest in both water and air studies (Baird in Proc R Soc Lond Ser Math Phys Sci 409:59-65, 1987, Poudel et al. in Phys Fluids 33:096105, 2021, Lim and Nickels in Nature 357:225, 1992, New et al. in Exp Fluids 57:109, 2016, Suzuki et al. in Geophys Res Lett 34, 2007, Yan et al. in J Fluids Eng 140:054502, 2018, New et al. in J Fluid Mech 899, 2020, Cheng et al. in Phys Fluids 31:067107, 2019, Hernández and Reyes in 29:103604, 2017, Mishra et al. in Phys Rev Fluids, 2021, Zednikova et al. …

Comparison Of Fuzzy And Neural Network Computing Techniques For Performance Prediction Of An Industrial Copper Flotation Circuit, Ivana Jovanović, Fardis Nakhaei, Daniel Kržanović, Vesna Conić, Daniela Urošević

Mining Engineering Faculty Research & Creative Works

This paper presents the development and validation of five different soft computing methods for flotation performance prediction: (1) two models based on fuzzy logic (Mamdani and Takagi-Sugeno fuzzy inference system) and (2) three models based on artificial neural networks. Copper content in the ore feed, collector dosage in the rougher and the scavenger flotation circuits, slurry pH in the rougher flotation circuit and frother consumption were selected as input parameters to estimate the copper grade and recovery of final concentrate, as well as the copper content in the final tailings of the flotation plant. The training and evaluation of the …

Dendrimer-Based Drug Delivery Systems: History, Challenges, And Latest Developments, Juan Wang, Boxuan Li, Li Qiu, Xin Qiao, Hu Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Since the first dendrimer was reported in 1978 by Fritz Vögtle, dendrimer research has grown exponentially, from synthesis to application in the past four decades. The distinct structure characteristics of dendrimers include nanoscopic size, multi-functionalized surface, high branching, cavernous interior, and so on, making dendrimers themselves ideal drug delivery vehicles. This mini review article provides a brief overview of dendrimer's history and properties and the latest developments of dendrimers as drug delivery systems. This review focuses on the latest progress in the applications of dendrimers as drug and gene carriers, including 1) active drug release strategies to dissociate drug/gene from …

Post-Translational Modifications And Age-Related Hearing Loss, Parveen Bazard, Jennifer Pineros, Alejandro A. Acosta, Mark Thivierge, Lauren R. Paganella, Samuel Zucker, Freyda L. Mannering, Shrikar Modukuri, Xiaoxia Zhu, Robert D. Frisina, Bo Ding

Chemical and Biochemical Engineering Faculty Research & Creative Works

Post-translational modifications (PTMs) affect nearly all systems of the human body due to their role in protein synthesis and functionality. These reversible and irreversible modifications control the structure, localization, activity, and properties of proteins. For this reason, PTMs are essential in regulating cellular processes and maintaining homeostasis. Diseases such as Alzheimer's, cardiovascular disease, diabetes, cancer, and many others have been linked to dysfunctions of PTMs. Recent research has also shown that irregularities in PTMs can be linked to hearing loss, including age-related hearing loss (ARHL) – the number one communication disorder and one of the top neurodegenerative diseases in our …

Natural 2d Layered Mineral Cannizzarite With Anisotropic Optical Responses, Arindam Dasgupta, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Cannizzarite is a naturally occurring mineral formed by van der Waals (vdW) stacking of alternating layers of PbS-like and Bi2S3-like two-dimensional (2D) materials. Although the PbS-type and Bi2S3-type 2D material layers are structurally isotropic individually, the forced commensuration between these two types of layers while forming the heterostructure of cannizzarite induces strong structural anisotropy. Here we demonstrate the mechanical exfoliation of natural cannizzarite mineral to obtain thin vdW heterostructures of PbS-type and Bi2S3-type atomic layers. The structural anisotropy induced anisotropic optical properties of thin cannizzarite flakes are explored through angle-resolved polarized Raman scattering, linear dichroism, and polarization-dependent anisotropic third-harmonic generation. …

Project Management And Systems Engineering Framework For Educational Cubesat Missions, Bailey Garrett

Master's Theses

The rising complexity of CubeSat missions and the unique challenges faced by educational CubeSat programs lead to high rates of mission failure. Implementing project management and systems engineering practices can alleviate these challenges and improve mission success rates for educational CubeSat developers. However, existing project management and systems engineering resources are too cumbersome and often assume the student has a base-level understanding of project management and systems engineering fundamentals. A new universal project management and systems engineering framework was created and tailored specifically to the needs of an educational CubeSat mission. The framework was designed to accommodate first-time CubeSat developers, …

Identifying And Minimizing Underspecification In Breast Cancer Subtyping, Jonathan Cheuk-Kiu Tang

Master's Theses

In the realm of biomedical technology, both accuracy and consistency are crucial to the development and deployment of these tools. While accuracy is easy to measure, consistency metrics are not so simple to measure, especially in the scope of biomedicine where prediction consistency can be difficult to achieve. Typically, biomedical datasets contain a significantly larger amount of features compared to the amount of samples, which goes against ordinary data mining practices. As a result, predictive models may fail to find valid pathways for prediction during training on such datasets. This concept is known as underspecification.

Underspecification has been more accepted …

A Design Of A Digital Lockout Tagout System With Machine Learning, Brandon H. Chen

Master's Theses

Lockout Tagout (LOTO) is a safety procedure instated by the Occupational Safety and Health Administration (OSHA) when doing maintenance on dangerous machinery and hazardous power sources. In this procedure, authorized workers shut off the machinery and use physical locks and tags to prevent operation during maintenance. LOTO has been the industry standard for 32 years since it was instantiated, being used in many different industries such as industrial work, mining, and agriculture. However, LOTO is not without its issues. The LOTO procedure requires employees to be trained and is prone to human error. As well, there is a clash between …

Design Of A System To Investigate The Relationship Between Feedback And Delivery Medium For A Novel Motor Task, Ashley Humpal

Master's Theses

Stroke is a chronic, lifelong illness, and full recovery requires continuous physical and cognitive rehabilitation. Such long-term rehabilitation is cost-prohibitive; however an approach to providing long-term therapy that has recently gained traction is the use of socially assistive agent (SAA) systems. These systems make use of non-contact communication devices and can be used to guide people through a variety of rehabilitative tasks. They have the potential supplement current rehabilitation practices by providing motivation during intense exercises, and can extend the reach of the therapist into remote and home settings.

Though SAA systems have been used in a variety of rehabilitative …

Effects Of Atomic Oxygen On Outgassing Of Silicone Materials, Samuel Westrick

Master's Theses

An important consideration for spacecraft material selection is the space environment that the spacecraft will be operating in. Two features of the space environment that drive material selection are material outgassing and the presence of atomic oxygen in low Earth orbit (LEO). Materials that are considered for use in space are tested to be able to understand how they’ll outgas on orbit and how they’ll respond to interactions with atomic oxygen. However, testing to understand how atomic oxygen interaction with a material will affect how the material will outgas is rare and not standardized. This thesis used a vacuum chamber …

A Study On The Effects Of Cementless Total Knee Arthroscopy Implants' Surface Morphology With Finite Element Analysis, Peter Hunt

Master's Theses

Total knee arthroscopy is one of the most performed and most successful orthopedic surgeries, with nearly a million procedures performed in 2020 in the United States alone. Due to changing patient demographics, the use of cementless fixation for implant stability is becoming more prevalent amongst recipients. Cementless implants rely on the surface morphology of a porous coating to bond implant to bone; the quality of this bond is dependent on an interference fit and the roughness, or coefficient of friction, between implant and bone. Stress shielding is a comparison of the properties in implanted bone to natural bone; it is …

Biodegradation Of Methyl Tert-Butyl Ether And Tert-Butyl Alcohol Using Bioaugmentation With Biowish® Aqua, Elizabeth Villanueva

Master's Theses

Aqua, a commercial product manufactured by BiOWiSH® Technologies, was utilized in this research to study its effectiveness to biodegrade methyl tert-butyl ether (MTBE) and tert-butyl alcohol (TBA). Microcosms containing varying concentrations of MTBE and TBA as well as a growth media and mineral salt solution were examined. Analytical instrumentation used in this study included the use of a gas chromatograph-mass spectrometer (GC/MS) to determine concentrations of MTBE and TBA and a spectrophotometer to extrapolate approximate active biomass concentrations in each experiment. Four different environmental conditions were tested for both MTBE and TBA. The environmental conditions tested for each contaminant included: …

Implementation Of Self Diving Car To Assist Physically Challenged People By Analyzing Eeg Signals, Santhosh Kumar, Meghana S, Shobha Airaddi, Gagana P, Advithi M J

Manipal Journal of Science and Technology

The modern technology which is meant to provide communication between our brain and the car is BCI (Brain computer interface). Its goal is to help persons who are disabled or have trouble moving due to muscle cramps. It uses an EEG (Electroencephalogram) headset to record data, classifies and demonstrate the set of data on the hardware and attain required commands on the robotic car reached from the given order. The data is moved through a Zigbee module in that period Arduino will executes the commands. This interfacing techniques can be used to unravel brain activity into commands to control outer …

Iot-Based Alert System For Geriatric, Vaibhav Meshram Dr, Meghana P V N, R Sahana, Sai Lakshmi Lasya V, Shreya S Reddy

Manipal Journal of Science and Technology

No abstract provided.

Simulation Of Building Interior With Lighting And Window Blind Control, Susan G. Varghese Dr.

Manipal Journal of Science and Technology

The lighting system plays a significant role in our daily lives. Almost every building consists of different lighting systems based on the application. A good lighting design requires a control system that ensures the right amount of light is available where and when it is needed; this also minimizes the energy consumption of lighting installations. This simulation-assisted study investigated the energy and cost analysis of a three-storey building. Here we considered daylight controls using window blinds and artificial light integration with zone control to dim the luminaire with available daylight using sensors. The main focus while choosing classroom lighting for …

Iot-Based Smart Environment System, Soumya R

Manipal Journal of Science and Technology

No abstract provided.

A Simple Technique To Obtain The Response Of A Structure Considering Soil-Structure Interaction (Ssi), Smit Kamal

Manipal Journal of Science and Technology

In the conventional analysis of structures, the effect of soil-structure interaction (SSI) is generally neglected. Analysis of the structures without considering the effect of SSI may not be a realistic approach for all the cases particularly when structures are subjected to forces due to earthquakes. One of the limitations of SSI consideration in the analysis is due to the complexity involved in such analysis and this is the main reason for neglecting SSI in the analysis. In this paper, an alternative method for obtaining a structure response that is similar to a structure taking SSI is proposed. In this approach, …

Project Selection In Facility And Infrastructure Maintenance Organizations, Bayram M. Kurbanov

Theses and Dissertations

The current Air Force Civil Engineer Center (AFCEC) built infrastructure Facility Sustainment Restoration and Modernization (FSRM) portfolio management methodology results in an unbalanced project portfolio. The consequence of this unbalance is that majority of the funding goes towards buildings on the flightline and Facility Support Services activities do not get adequate funding which leads to further deterioration of those facilities. This research investigates whether decision support framework based on Value-Focused Thinking (VFT) process yields better project selection outcomes for facility and infrastructure maintenance organizations. To accomplish that, the investigation focuses on understanding current AFCEC decision support methodology, building an alternative …

Investigating Supply Parts Delivery Delay From Supply Depot To King Khaled Air Base In Royal Saudi Air Force, Rashed S. Alkhathami

Theses and Dissertations

Aircraft supply parts is an important factor in preparing the aircraft to do its mission. Due to delayed delivery of parts or inefficient delivery process, time may be lost waiting for aircraft supply parts, causing mission delay or failure. By tackling the delivery delay causes we can insure improvement on delivery process. In order to gather data for this thesis two different tools were used, aircraft parts data and an interview. Data was gathered from the F15 maintenance and supply squadrons in the Royal Saudi Air Force. Results of this research showed diverting in the main duty of supply depot …

Characterization Of Losses In Superconducting Radio-Frequency Cavities By Combined Temperature And Magnetic Field Mapping, Ishwari Prasad Parajuli

Physics Theses & Dissertations

Superconducting radio-frequency (SRF) cavities are one of the fundamental building blocks of modern particle accelerators. To achieve the highest quality factors (10¹⁰-10¹¹), SRF cavities are operated at liquid helium temperatures. Magnetic flux trapped on the surface of SRF cavities during cool-down below the critical temperature is one of the leading sources of residual RF losses. Instruments capable of detecting the distribution of trapped flux on the cavity surface are in high demand in order to better understand its relation to the cavity material, surface treatments and environmental conditions. We have designed, developed, and commissioned two novel …

Effects Of A Non-Uniform Magnetic Field On The Current Flow Of Silicon Photodiodes And Solar Cells, Jason J. Buranich

Theses and Dissertations

This research investigates an approach to improve efficiency of low-cost devices by applying an external arched magnetic field to p-n junction devices to observe the effect such a magnetic field would have on the flow of charge carriers. Electro-optic p-n junction devices of photodiodes and solar cells were designed and fabricated to incorporate the dimensions of commercially available neodymium magnets. The devices were placed in the magnetic fields created by the magnets then current and voltage characteristics were measured via a 4-point probe setup. These measurements were compared to measurements taken from the same devices when not in the magnetics …

Learning Curve Characterization Within Complex Low-Rate Production Environments, Robert J. Gies

Engineering Management & Systems Engineering Theses & Dissertations

Traditional and current learning curve approaches, methods, and theories were deficient when addressing complex low-rate production systems. The purpose of this research was to address this problem and develop a learning curve approach that characterizes learning in low-rate production environments such as naval ship construction. This research identified the principal aspects that influence learning within this environment and developed a learning characterization more reflective of this environment.

There obviously exists a large body of knowledge covering learning. However, the research contained herein addresses learning as it relates to learning curves in low-rate production environments, such as naval shipbuilding. The various …

Advanced Generalized Predictive Control And Its Application To Tiltrotor Aircraft For Stability Augmentation And Vibration Reduction, Thomas Glen Ivanco

Mechanical & Aerospace Engineering Theses & Dissertations

The goals of this research were to restore generalized predictive control (GPC) capability at NASA and within the community, to better understand GPC and its performance relative to other options, and to improve upon the capability of GPC. Unique to this research is the comparison of GPC with other control options including PID controllers, optimal control theory, and other versions of the similar AutoRegressive moving average model with eXogenous inputs (ARX) models. Similar to GPC, ARX models use an experimentally acquired system identification to characterize the input/output relationship between controls and response measurements. Because this relationship is determined from acquired …

Integrative Physiology-Coupled Pilot-Centered Flight Simulation, Shawn C. Harrison

Electrical & Computer Engineering Theses & Dissertations

Maintaining the pilot’s physiological performance envelope within the limits of human capabilities may be crucial for avoiding hazardous physiological episodes in fighter aircraft that compromise safety. The main physiological episode of interest is impaired pilot respiration, better known as hypoxia caused by a high fraction of inspired oxygen (FiO₂) at high altitudes and variation in accelerative gravitational forces (g-forces). Integrated into fighter aircraft is an Onboard Oxygen Generating System (OBOGS) developed to mitigate the necessity of gaseous and liquid oxygen cannisters [1]. OBOGS act as a life support in hypoxic environments by providing oxygen-rich air, thereby oxygenating the …

Hard-Real-Time Computing Performance In A Cloud Environment, Alvin Cornelius Murphy

Engineering Management & Systems Engineering Theses & Dissertations

The United States Department of Defense (DoD) is rapidly working with DoD Services to move from multi-year (e.g., 7-10) traditional acquisition programs to a commercial industrybased approach for software development. While commercial technologies and approaches provide an opportunity for rapid fielding of mission capabilities to pace threats, the suitability of commercial technologies to meet hard-real-time requirements within a surface combat system is unclear. This research establishes technical data to validate the effectiveness and suitability of current commercial technologies to meet the hard-real-time demands of a DoD combat management system. (Moreland Jr., 2013) conducted similar research; however, microservices, containers, and container …

Effectiveness Of Suspended Lead Dampers In Steel Buildings Under Localized Lateral Impact And Vertical Pulsating Load, Herish Abdullah Hussein

Civil & Environmental Engineering Theses & Dissertations

Presented herein is a study of the effectiveness of suspended lead dampers for use in steel buildings under a localized impact load and a vertical pulsating load. A series of lead spheres mounted on a string are suspended inside the building columns or damping panels to absorb the energy of vibration through a collision between the lead dampers and internal surfaces of the members. Experiments are conducted on a three-story steel building model and a cantilever member with suspended lead dampers and subjected to localized impact loading. The cantilever under impact load is analyzed with a partial differential equation of …

A Systems Theory-Based Framework For Environmental Scanning In Complex System Governance, Dale E. Baugh

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a Systems Theory-based framework for Environmental Scanning (ES) in Complex System Governance (CSG) using an inductive research design. Complexity and uncertainty are normal for external environments in which today’s systems (organizations) exist. These environmental characteristics provide impetus for researchers to focus on organizational planning for disruptive external forces that could threaten system stability and future system existence. The ES function supports the requisite governance metasystemic functions to be enabled, executed, and evolved sufficiently well to promote continuous system viability. In this research the functioning of ES was examined from a diverse literature-based …

E-Beam Irradiation Beamline At Jefferson Lab For Wastewater Treatment, Xi Li

Electrical & Computer Engineering Theses & Dissertations

Electron beam (e-beam) irradiation is an advanced method for removing the emerging organic contaminants in wastewater, such as 1,4-dioxane, and per- and polyfluoroalkyl substances (PFAS), which have the potential to be regulated in the near future but are difficult to degrade by conventional treatment methods. This dissertation was based on a collaborating study between Jefferson Lab (Jlab) and Hampton Roads Sanitation District (HRSD) to evaluate the impacts of e-beam irradiation on the degradation of 1,4-dioxane and PFAS. It presents the detailed design of an e-beam irradiation beamline, the beamline simulation using general particle tracer (GPT), the installation, and the successful …

Multiscale Topology Optimization With A Strong Dependence On Complementary Energy, Dustin Dean Bielecki

All Dissertations

A discrete approach introduces a novel deep learning approach for generating fine resolution structures that preserve all the information from the topology optimization (TO). The proposed approach utilizes neural networks (NNs) that map the desired engineering properties to seed for determining optimized structure. This framework relies on utilizing parameters such as density and nodal deflections to predict optimized topologies. A three-stage NN framework is employed for the discrete approach to reduce computational runtime while maintaining physics constraints.

A continuous representation that uses complementary energy (CE) methods to solve a representative element's homogenized properties consists of an embedded structure that is …

In Vitro Bioreactor For Mechanical Control And Characterization Of Tissue Constructs, Samuel Coeyman

All Dissertations

Heart failure (HF) currently affects over 6 million Americans, 50% of whom die within 5 years of their initial diagnosis. A major contributor to the onset of HF is cardiac fibrosis in the myocardium, which arises when fibroblasts (FBs) are activated in response to heightened mechanical stress from overload conditions like hypertension. Activated FBs remodel the extracellular matrix (ECM) and secrete ECM proteins including collagen. FB remodeling has been studied in the past by applying forces and/or deformations to three-dimensional, cell-seeded gels and tissue constructs in vitro. Unfortunately, previous stretching platforms have traditionally not enabled mechanical property assessment to be …