Engineering Commons^™

Improving Safety Service Patrol Performance, Mecit Cetin, Hong Yang, Kun Xie, Sherif Ishak, Guocong Zhai, Junqing Wang, Giridhar Kattepogu

Civil & Environmental Engineering Faculty Publications

Safety Service Patrols (SSPs) provide motorists with assistance free of charge on most freeways and some key primary roads in Virginia. This research project is focused on developing a tool to help the Virginia Department of Transportation (VDOT) optimize SSP routes and schedules (hereafter called SSP-OPT). The computational tool, SSP-OPT, takes readily available data (e.g., corridor and segment lengths, turnaround points, average annual daily traffic) and outputs potential SSP configurations that meet the desired criteria and produce the best possible performance metrics for a given corridor. At a high level, the main components of the developed tool include capabilities to: …

Development Of A Data Science Curriculum For An Engineering Technology Program, Salih Sarp, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic, Zafer Acar

Engineering Technology Faculty Publications

Data science has gained the attention of various industries, educators, parents, and students thinking about their future careers. Statistics departments have traditionally offered data science courses for a long time. The main objective of these courses is to examine the fundamental concepts and theories. However, teaching data science courses has also expanded to other disciplines due to the vast amount of data being collected by numerous modern applications. Also, someone needs to learn how to collect and process data, especially from industrial devices, because of the recent development of Internet of Things (IoT) technologies. Hence, integrating data science into the …

Automating Intersection Marking Data Collection And Condition Assessment At Scale With An Artificial Intelligence-Powered System, Kun Xie, Huiming Sun, Xiaomeng Dong, Hong Yang, Hongkai Yu

Civil & Environmental Engineering Faculty Publications

Intersection markings play a vital role in providing road users with guidance and information. The conditions of intersection markings will be gradually degrading due to vehicular traffic, rain, and/or snowplowing. Degraded markings can confuse drivers, leading to increased risk of traffic crashes. Timely obtaining high-quality information of intersection markings lays a foundation for making informed decisions in safety management and maintenance prioritization. However, current labor-intensive and high-cost data collection practices make it very challenging to gather intersection data on a large scale. This paper develops an automated system to intelligently detect intersection markings and to assess their degradation conditions with …

Preparing Students To Solve Challenges Related To A Changing Climate, Mujde Erten-Unal, Dalya Ismael, Carol L. Considine

Civil & Environmental Engineering Faculty Publications

The National Academy of Engineering has identified restoring and improving urban infrastructure as one of the grand challenges for engineering. Urban coastal communities are particularly at risk as their infrastructure is experiencing frequent inundation related to climate change impacts. Rising sea levels in coastal communities create backflow into stormwater systems and deplete capacity. In addition, the increase in rainfall intensity, duration, and frequency related to climate change create additional challenges for aging infrastructure systems. To prepare students to solve these challenges, the Civil and Environmental Engineering (CEE) and Civil Engineering Technology (CET) programs at Old Dominion University (ODU) are introducing …

Atlas-Based Shared-Boundary Deformable Multi-Surface Models Through Multi-Material And Two-Manifold Dual Contouring, Tanweer Rashid, Sharmin Sultana, Mallar Chakravarty, Michel Albert Audette

Electrical & Computer Engineering Faculty Publications

This paper presents a multi-material dual “contouring” method used to convert a digital 3D voxel-based atlas of basal ganglia to a deformable discrete multi-surface model that supports surgical navigation for an intraoperative MRI-compatible surgical robot, featuring fast intraoperative deformation computation. It is vital that the final surface model maintain shared boundaries where appropriate so that even as the deep-brain model deforms to reflect intraoperative changes encoded in ioMRI, the subthalamic nucleus stays in contact with the substantia nigra, for example, while still providing a significantly sparser representation than the original volumetric atlas consisting of hundreds of millions of voxels. The …

Commentary On Healthcare And Disruptive Innovation, Hilary Finch, Affia Abasi-Amefon, Woosub Jung, Lucas Potter, Xavier-Lewis Palmer

Electrical & Computer Engineering Faculty Publications

Exploits of technology have been an issue in healthcare for many years. Many hospital systems have a problem with “disruptive innovation” when introducing new technology. Disruptive innovation is “an innovation that creates a new market by applying a different set of values, which ultimately overtakes an existing market” (Sensmeier, 2012). Modern healthcare systems are historically slow to accept new technological advancements. This may be because patient-based, provider-based, or industry-wide decisions are tough to implement, giving way to dire consequences. One potential consequence is that healthcare providers may not be able to provide the best possible care to patients. For example, …

Past Challenges And The Future Of Discrete Event Simulation, Andrew J. Collins, Farinaz Sabz Ali Pour, Craig A. Jordan

Engineering Management & Systems Engineering Faculty Publications

The American scientist Carl Sagan once said: “You have to know the past to understand the present.” We argue that having a meaningful dialogue on the future of simulation requires a baseline understanding of previous discussions on its future. For this paper, we conduct a review of the discrete event simulation (DES) literature that focuses on its future to understand better the path that DES has been following, both in terms of who is using simulation and what directions they think DES should take. Our review involves a qualitative literature review of DES and a quantitative bibliometric analysis of the …

An Ioe Blockchain-Based Network Knowledge Management Model For Resilient Disaster Frameworks, Amir Javadpour, Farinaz Sabz Ali Pour, Arun Kumar Sangaiah, Weizhe Zhang, Forough Ja'far, Ashish Singh

Engineering Management & Systems Engineering Faculty Publications

The disaster area is a constantly changing environment, which can make it challenging to distribute supplies effectively. The lack of accurate information about the required goods and potential bottlenecks in the distribution process can be detrimental. The success of a response network is dependent on collaboration, coordination, sovereignty, and equal distribution of relief resources. To facilitate these interactions and improve knowledge of supply chain operations, a reliable and dynamic logistic system is essential. This study proposes the integration of blockchain technology, the Internet of Things (IoT), and the Internet of Everything (IoE) into the disaster management structure. The proposed disaster …

Jet Noise Reduction: A Fresh Start, Christopher K. Tam, Fang Q. Hu

Mathematics & Statistics Faculty Publications

Attempts to reduce jet noise began some 70 years ago. In the literature, there have been many publications written on this topic. By now, it is common knowledge that jet noise consists of a number of components. They possess different spectral and radiation characteristics and are generated by different mechanisms. It appears then that one may aim at the suppression of the noise of a single component instead of trying to reduce jet noise overall. The objective of the present project is to reduce large turbulence structures noise. It is the most dominant noise component radiating in the downstream direction. …

Synthesis Of A Series Of Trimeric Branched Glycoconjugates And Their Applications For Supramolecular Gels And Catalysis, Jonathan Bietsch, Anji Chen, Dan Wang, Guijun Wang

Chemistry & Biochemistry Faculty Publications

Carbohydrate-derived molecular gelators have found many practical applications as soft materials. To better understand the structure and molecular gelation relationship and further explore the applications of sugar-based gelators, we designed and synthesized eight trimeric branched sugar triazole derivatives and studied their self-assembling properties. These included glucose, glucosamine, galactose, and maltose derivatives. Interestingly, the gelation properties of these compounds exhibited correlations with the peripheral sugar structures. The maltose derivative did not form gels in the tested solvents, but all other compounds exhibited gelation properties in at least one of the solvents. Glucose derivatives showed superior performance, followed by glucosamine derivatives. They …

Effects Of Electrodes Layout On Performance Of Millimeter-Wave Transistors, Soheil Nouri, Samir M. El-Ghazaly

Electrical Engineering Faculty Publications and Presentations

This work presents a systematic parameter extraction methodology for modeling of millimeter-wave transistors. The physics-based parameter extraction approach in this study is included in the wave-electron-transport model to improve the accuracy of the simulation results. The effects of extrinsic parameters on the performance of the device are also analyzed in detail. Skin effects and sharp metallization edge effects as the two physical phenomena that impact the current distribution and the resistance of millimeter-wave transistors are studied thoroughly. Two common electrode layout variations, the T configuration and the fork configuration, are compared. The comparison mainly targeted their performance on upper millimeter …

Developing Mesoporous Silica Nanoparticle-Based Stimuli-Responsive Nanocarriers For Delivery Of Small Molecule Therapeutics Against Colon Cancer Cells, Nisitha Lakmal Wellala Wijewantha

Dissertations and Theses

This dissertation delves into the innovative application of mesoporous silica nanoparticles (MSNs) for targeted drug delivery in colorectal cancer (CRC), one of the most prevalent and deadly forms of cancer worldwide. The initial focus of the research is on developing enzyme-responsive MSNs loaded with veratridine (VTD), an alkaloid derived from natural sources that demonstrates potent anticancer activity. The nanoparticles have been engineered to deliver VTD selectively to CRC cells, releasing the payload upon being exposed to specific enzymes primarily secreted by these cells. This strategy has dual advantages of amplifying the anticancer effects while minimizing potential side effects on healthy …

High Energy Blue Light Induces Oxidative Stress And Retinal Cell Apoptosis, Jessica Malinsky

Capstone Showcase

Blue light (BL) is a high energy, short wavelength spanning 400 to 500 nm. Found in technological and environmental forms, BL has been shown to induce photochemical damage of the retina by reactive oxygen species (ROS) production. Excess ROS leads to oxidative stress, which disrupts retinal mitochondrial structure and function. As mitochondria amply occupy photoreceptors, they also contribute to oxidative stress due to their selectively significant absorption of BL at 400 to 500 nm. ROS generation that induces oxidative stress subsequently promotes retinal mitochondrial apoptosis. BL filtering and preventative mechanisms have been suggested to improve or repair BL-induced retinal damage, …

Developing A Web-Based System For Remote Collection And Analysis Of Vehicle Electrical Systems Over Canbus Using Carloop, Joshua N. Valle, Alex Columna-Fuentes

Capstone Showcase

Our program collects vehicle data using an OBD-II device called Carloop that is plugged into the vehicle's diagnostic port. The device executes our code which then communicates with the vehicle's onboard computer to collect data such as engine RPM, vehicle speed, fuel level, and other diagnostic information. This data is then sent over WiFi to Particle’s Cloud, which is a platform for managing IoT devices.

Integrations set up on Particle take care of sending data to our InfluxDB Database, which is hosted on our own cloud-based machine. InfluxDB is a high-performance time-series database that is optimized for storing and querying …

Evaluating Ai Sentiment Analysis, Aakriti Shah

Honors Program Theses

This paper presents a comparative analysis of human and AI performance on a sentiment analysis task involving the coding of qualitative data from community program transcripts. The results demonstrate promising but imperfect agreement between two AI models, Claude and Bing, versus three human annotators and one expert annotator using the Community Capitals framework categories. While both models achieved fair alignment with human judgment, confusion patterns emerged involving metaphorical language and text overlapping multiple categories. The findings provide a case study for benchmarking conversational AI systems against human baselines to reveal limitations and target improvements. Key gaps center around distinguishing between …

Effect Of Decorating Super Paramagnetic Iron Oxide Nanoparticles With Silver Nanoparticles On Their Magneto-Photo Thermal Heating Efficiency, Anthony Joseph Afful

All Graduate Theses, Dissertations, and Other Capstone Projects

Cancer treatment is rather dangerous to the body, often involving many secondary effects, including nausea, hair loss, and weight fluctuations. The search for non-invasive, highly efficient, and targetable treatments ameliorates these issues. Super paramagnetic iron oxide nanoparticles (SPIONS) have been used for other medical purposes such as magnetic resonance imaging contrast agent and is being extensively studied as a potential candidate for many cancer therapeutic and diagnostic approaches due to its biocompatibility and superior magnetic properties. When subjected to an external alternating magnetic field SPIONS generate heat mainly due to the friction of the SPIONS against the fluid it is …

Impacts Of Ergonomic Conditions On Quality And Cycle Time In Automotive Shock Absorber Assembly, Val Urman

All Graduate Theses, Dissertations, and Other Capstone Projects

Earlier studies have demonstrated relationships between general ergonomic conditions in assembly and quality defects or cycle time. This study investigated the impacts of specific ergonomic conditions on the quality and cycle time of shock absorber assembly. Ergonomic conditions within a single manual assembly cell were controlled through three factors: assembly height, reachability, and standing surface. Experiments were conducted with varied workstation conditions to determine the impact on the time of assembly and multiple quality metrics. Reachability and standing surface affected the quality of the assembly. Additionally, cycle time of the assembly was impacted by reachability of the components.

The Analysis, Development And Calibration Of Prototype Hardware In Effort To Improve Brake Thermal Efficiency And Real-World Fuel Economy Of The International Supertruck, Matthew Taylor

All Graduate Theses, Dissertations, and Other Capstone Projects

The work performed for this project was in part of the effort of the Department of Energy Sponsored program called ‘SuperTruck’. The entirety of the Supertruck program encompasses total vehicle re-design to achieve 80% freight efficiency improvement (over the 2009MY baseline production vehicle). However, the other main goal for the program is to achieve 50% engine brake thermal efficiency. The work outlined in this document describes the efforts performed on base engine and thus mainly contributing towards 50% BTE. Though ultimately reducing BSFC by increasing BTE contributes to both outcomes. The engine development data discussed in this paper was collected …

Solid-State Shear Pulverization: A Comprehensive Study On Polymer Processing Technology From A Systematic Innovation Perspective, Tyler A. Will

Master’s Theses

Solid-state shear pulverization (SSSP) is a continuous and scalable processing technique that imposes mechanochemical changes in polymer-based materials. It has been shown to impart beneficial properties onto homopolymers or create copolymers and composites through continuous fragmentation and fusion. The unique technology employs cold temperature to keep the polymer in the solid state. This thesis investigates industrial polymer processing in the context of real-world applications. This thesis analyzes SSSP using an organized methodology called systematic innovation (SI). SI facilitates problem solving by assisting engineers in conducting root cause analysis around a material and studying the physical setup of the equipment.

This …

Pneumatic Latched Demultiplexer Circuit For Controlling Multi-Actuator Soft Robots, Arsh Noor Amin

Master’s Theses

This thesis presents a novel method for controlling multi-actuator soft robots using pneumatic latched demultiplexer circuits implemented with monolithic membrane valves. The pneumatic circuits are designed to address the problems of heavy dependence on hard electrical components and lack of feasible multi-actuator soft robotic systems that limit the potential applications of soft robotics. The proposed pneumatic demultiplexers reduce the number of solenoid valves and electrical components required to drive soft robotic systems, making soft robot control mechanisms more compliant, scalable, and versatile. The thesis demonstrates the design, fabrication, and testing of 4-bit and n-bit pneumatic demultiplexer circuits that can control …

Temperature-Dependent Diffusion In Block Copolymer Organogels, Ridwana Bashar

Master’s Theses

Organogels are often considered for transport-based applications such as transdermal drug delivery vehicles and gel actuators due to their unique properties. Recent consideration of styrenic block copolymer based organogels’ application in transdermal drug delivery requires an extensive investigation of drug diffusion behavior through these gels to assess their applicability. Temperature is a major influencing parameter on diffusion. The goal of this research is to better understand the impact of temperature on diffusion in styrenic triblock copolymer organogels. To accomplish this goal, we focused on three specific objectives: (i) accurately measure the diffusivities of a solute – AOT reverse micelles – …

Exploration Of Robotics Need In The Medical Field And Robotic Arm Operation Via Glove Control, Aditi Vijayvergia

Master’s Theses

This thesis project is an exercise in getting hands-on experience in redesigning and modifying a robotic system. It also involves understanding the current need for robotic applications in hospital settings. To achieve the above, a thorough literature review of the current state of robotics in a hospital setting was conducted. Moreover, a number of interviews with medical care professionals were completed. Three main themes were obtained from the literature review and five main themes were obtained from the interviews which will be presented in this thesis report. The next phase of the project involved redesigning a system that is composed …

Amphisbaenian Head Movement And Burrowing Forces In Damp Granular Media, Jacob Newell

Williams Honors College, Honors Research Projects

Damp granular media is a difficult environment to study because it is both practically complex and it lacks equations which fully describe its behavior. In this study, an oscillatory lateral head movement and its effects while penetrating damp granular media were tested using a robophysical model. This experimental research was inspired by the burrowing behavior of the clade Amphisbaenia, a group of usually limbless squamates that employ a variety of different burrowing behaviors, but it can apply to a wide range of burrowers. This research could help with both human burrowing technologies and the further investigation of animal behaviors.

The Role Of Health Crises In Managing The Workflow In Emergency Departments' Cases Study Egyptian Hospitals, Alshaimaa Hussein Mohammed

Mansoura Engineering Journal

Hospitals and emergency departments have faced numerous challenges as they are considered the first line of defence when receiving patients. It also serves as the first detector of epidemiological conditions to which men turn when medical situations appear. In this regard, there are no Egyptian studies available for evaluating the emergency department. The research discussed the new requirements in workflow that necessitate an assessment of the status quo of emergency departments, especially in Egyptian hospital design. The study examined several emergency departments in Egypt. In this regard, the study discusses various methods and precautions taken in hospitals during epidemics, and …

Component Maintenance Strategies And Risk Analysis For Random Shock Effects Considering Maintenance Costs, Chao Zhang, Yadong Zhang, Hongyan Dui, Shaoping Wang, Mileta Tomovic

Engineering Technology Faculty Publications

Maintenance can improve a system’s reliability in a long operation period or when a component has failed. The reliability modeling method that uses the stochastic process degradation model to describe the system degradation process has been widely used. However, the existing reliability models established using stochastic processes only consider the internal degradation process, and do not fully consider the impact of external random shocks on their reliability modeling. Furthermore, the existing theory of importance does not consider the actual factors of maintenance cost. In this paper, based on the reliability modeling of random processes, the degradation rate under the influence …

Integration Of Omnet++ Into A Networking Course In An Electrical Engineering Technology Program, Murat Kuzlu, Brian Emmanuel Tamayo, Salih Sarp, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Networking courses are an integral part of electrical engineering technology programs as the majority of electronics in the modern day are required to communicate with each other. They are also getting more attention in manufacturing engineering technology programs because of the development of emerging technologies in Industry 4.0 arena. From laptops, computers, cellphones, modern day vehicles and smart refrigerators, these devices require a certain level of networking in order to communicate with other devices, whether it be locally, or even across the other side of the world. The objective of networking courses in an electrical engineering program is to demonstrate …

Cold-Formed Steel Strength Predictions For Combined Bending And Torsion, Yu Xia, Robert S. Glauz, Benjamin W. Schafer, Michael Seek, Hannah B. Blum

Engineering Technology Faculty Publications

Locally slender cross-section members, such as cold-formed steel Cee and Zee sections, are susceptible to significant twisting and high warping torsion stresses. Torsion considerations are complicated by whether it is derived as a first-order effect from loading or a second-order effect from instability. The current design for combined bending and torsion interaction has some limitations, including only considering the first yield in torsion and ignoring the cross-section slenderness in torsion. Previous work has derived a simple uniform equation to predict the bimoment capacity and two bimoment strength curves for local and distortional buckling under torsion only. This work is extended …

Understanding And Assessing Demographic (In)Equity Resulting From Extreme Heat Exposure Due To Lack Of Tree Canopies In Norfolk, Va Using Agent-Based Modeling, Virginia Zamponi, Kevin O'Brien, Erik Jensen, Brandon Feldhaus, Russell Moore, Christopher J. Lynch, Ross Gore

VMASC Publications

Prolonged exposure to extreme heat can result in illness and death. In urban areas of dense concentrations of pavement, buildings, and other surfaces that absorb and retain heat, extreme heat conditions can arise regularly and create harmful environmental exposures for residents daily during certain parts of the year. Tree canopies provide shade and help to cool the environment, making mature trees with large canopies a simple and effective way to reduce urban heat. We develop a demographically representative 1 (agent): 1 (person) agent-based model to understand the extent to which different demographics of residents in Norfolk, VA are equitably shaded …

Temperature Dependence Of Crystal Growth Behavior Of Aln On Ni–Al Using Electromagnetic Levitation And Computer Vision Technique, Benjamin G. Pierce, Ahmad M. Karimi, Roger H. French

Faculty Scholarship

Bulk AlN single crystal has a great demand as a substrate material for AlGaN-based optical and electronic devices such as deep ultraviolet light-emitting diodes and high-power transistors. We have previously proposed a novel solution-growth method using Ni–Al solution with an in-situ observation system for solution growth of AlN crystal using electromagnetic levitation. In this paper, to investigate AlN formation behavior on 40 mol%Al–Ni droplets, two precisely synchronized high-speed cameras from the horizontal and vertical directions were installed. AlN formation behavior was evaluated quantitatively using computer vision image processing techniques. Based on the results, we demonstrated the growth of thick AlN …

Reduced Metal Nanocatalysts For Selective Electrochemical Hydrogenation Of Biomass-Derived 5-(Hydroxymethyl)Furfural To 2, 5-Bis(Hydroxymethyl)Furan In Ambient Conditions, Baleeswaraiah Muchharla, Moumita Dikshit, Ujjwal Pokharel, Ravindranath Garimella, Adetayo Adedeji, Kapil Kumar, Wei Cao, Hani Elsayed-Ali, Kishor Kumar Sadasivuni, Naif Abdullah Al-Dhabi, Sandeep Kumar, Bijandra Kumar

Chemistry & Biochemistry Faculty Publications

Selective electrochemical hydrogenation (ECH) of biomass-derived unsaturated organic molecules has enormous potential for sustainable chemical production. However, an efficient catalyst is essential to perform an ECH reaction consisting of superior product selectivity and a higher conversion rate. Here, we examined the ECH performance of reduced metal nanostructures i.e., reduced Ag (rAg) and reduced copper (rCu) prepared via electrochemical or thermal oxidation and electrochemical reduction process, respectively. Surface morphological analysis suggests formation of nanocoral and entangled nanowire structure formation for rAg and rCu catalysts. rCu exhibits slight enhancement in ECH reaction performance in comparison to the pristine Cu. However, the rAg …