Engineering Commons^™

Analyzing Residential Curbside Collection For Food Waste In Humboldt County, Yvette Lindler

Cal Poly Humboldt theses and projects

The most prevalent material in the California landfill-destined solid waste stream is food. Food waste is not only an economic and social concern, but a significant environmental challenge as well. Most food waste is disposed of in landfills, where it anaerobically decomposes and releases methane, an extremely potent greenhouse gas and driver of climate change. Policies passed in California, including AB 1826 and SB 1383, aim to implement organic waste recycling programs and reduce methane emissions by diverting organic waste from landfills. The technology to process this food waste exists, but these facilities are limited or nonexistent in rural areas …

Techno-Economic Analysis Of A Utility-Scale Solar Power Plant In Bhutan., Minjur

Cal Poly Humboldt theses and projects

Solar Photovoltaic (PV) technology, which captures energy from the sun, is a rapidly growing technology. Bhutan’s heavy dependence on a single energy source, hydropower, has become a significant concern for energy security. To address this, the Government of Bhutan intends to diversify energy sources using alternative renewable sources.

This research determined that Bhutan has the total potential to develop 3 gigawatts (GW) of solar power based on the utilization of about 7,100 acres of suitable land. The study also identified Tenchhekha, near the capital city of Thimphu, as a potential solar power plant location, with a capacity of 4.85 MWp …

Creating An Internal Work-Based Learning Program For Students Who Are Not College-Bound, Rob J. Zamboni Mr.

Cal Poly Humboldt theses and projects

My research is qualitative on a small group of my students who register for my auto shop every year. These students don't all want to become auto mechanics but like working with their hands and are interested in going into the trades. Because of this I noticed a need to these students who are not going to college. I found another high school that is currently operating an internal Work-Based Learning program. A WBL program is set up for students to go to during the last two periods of the day and shadow a tradesperson on the job. This gives …

Peridynamic Simulation Of Elastic Wave Propagation By Applying The Boundary Conditions With The Surface Node Method, Francesco Scabbia, Mirco Zaccariotto, Ugo Galvanetto, Florin Bobaru

Department of Mechanical and Materials Engineering: Faculty Publications

Peridynamics is a novel nonlocal theory able to deal with discontinuities, such as crack initiation and propagation. Near the boundaries, due to the incomplete nonlocal region, the peridynamic surface effect is present, and its reduction relies on using a very small horizon, which ends up being expensive computationally. Furthermore, the imposition of nonlocal boundary conditions in a local way is often required. The surface node method has been proposed to solve both the aforementioned issues, providing enhanced accuracy near the boundaries of the body. This method has been verified in the cases of quasi-static elastic problems and diffusion problems evolving …

New York State Waste Characterization, David J. Tonjes, Sameena Manzur, Yiyi Wang, Mohammad Rahman, Firman Firmansyah, Krista L. Thyberg, Elizabeth Heiwtt

Technology & Society Faculty Publications

Analysis of sampling results from 25 tons of MSW and recyclables sorted across New York State at 11 locations in 2021 found that the composition of the wastes were different from place to place even when measured by mean data for each location.

Parameter by parameter analyses found that recyclables comprise from approximately 18% (a narrow definition of recyclables) to 23% (a broader definition of recyclables) of disposed wastes. Paper tends to be the greatest element in the disposed waste stream, although food waste is the largest single component. Plastics are also a very large part of the disposed waste …

Entry Points, Barriers And Institutional Support For Social Justice In Engineering Curricula, Diana A. Chen, Gordon Hoople, Jon A. Leydens, Cindy Rottman

School of Engineering: Faculty Scholarship

While the scholarship around engineering and social justice has seen substantial development, engineering curricula have been comparably slower to adapt. This chapter examines both the ways that social justice has made its way into engineering curricula and the barriers preventing wider adoption, particularly over the past decade. How does social justice emerge in diverse curricular contexts? What social justice frameworks and paradigms are engaged? This chapter examines three initiatives to infuse social justice into engineering at three different institutions and discusses entry points and barriers associated with integrating social justice into an engineering curriculum as well as the role institutional …

Low-Head Dams (Aka Drowning Machines) Are Deadly: An Analysis Of Liability For Landowners And States, And Recommendations For Legislation And Warning Signs, Forrest R. Hansen, Rollin H. Hotchkiss

Kentucky Journal of Equine, Agriculture, & Natural Resources Law

No abstract provided.

Circulating And Eddy Current Losses In Coreless Axial Flux Pm Machine Stators With Pcb Windings, Yaser Chulaee, Donovin Lewis, Ali Mohammadi, Greg Heins, Dean Patterson, Dan Ionel

Power and Energy Institute of Kentucky Faculty Publications

Printed circuit board (PCB) stators in coreless axial flux permanent magnet (AFPM) machines have been proposed, designed, and studied for use in multiple industries due to their design flexibility and reduction of manufacturing costs, volume, and weight compared to conventional stators. This paper investigates mechanisms and methods of approximating open circuit losses in PCB stators within example wave and spiral winding topologies for a dual rotor, single stator configuration using 3D FEA, analytical hybrid techniques and experiments. The effect of rotor magnet shape, end winding, and active conductor geometry on eddy currents is studied, and some mitigation techniques are proposed. …

A New Course In Defense Manufacturing – An Introduction To Shipbuilding, Alley C. Butler

Manufacturing & Industrial Engineering Faculty Publications

This paper discusses the development and deployment of a new course in DMEI (Defense Manufacturing Engineering Innovation) titled, “Introduction to Shipbuilding.” This course has been taught using Zoom since 2021 at both the University of Texas Rio Grande Valley, a Hispanic Serving Institution, and Virginia State University, a Historically Black University. After a brief literature review, an outline of the course is presented with topics including the maritime market for shipbuilding, economics of shipbuilding, the classification agencies, metallurgy and welding processes, ship structure and assembly, shipyard layout, accuracy control, and shipbuilding planning and scheduling. Difficulties in obtaining an appropriate textbook …

Microscopic Traffic Simulation Modeling And Communication Tool For Post-Disaster Evacuation Routing, Nicholas Kutheis

Masters Theses

"This research evaluated the effectiveness of conducting traffic simulation models and developing a mobile application to serve as a communication channel for emergency evacuation preparation and routing. An iOS and Android app was developed to display emergency events to users with suggested routes for evacuation and a microscopic traffic simulation model was conducted for the St. Louis (MO) metropolitan region that analyzed various road networks with projected evacuation demand.

A mobile application coded in Swift (Apple) and Kotlin (Android) featured an emergency notification screen that displayed the type of emergency warning (e.g., earthquake, flood, or no warnings) with provided routes …

Suppressing Aluminum/Silica Exchange Reaction Between High Aluminum Steel And Mold Flux During Continuous Casting Process, Kuanysh Nurbekuly Yermukhanbetov

Masters Theses

"Mold flux plays one of the critical roles in continuous casting of steel. It performs five primary functions: thermal and chemical insulation, lubrication between the steel strand and mold, absorption of inclusions, and promotion of even heat flux. The aluminum/silica exchange reaction occurring between steel and mold flux during the continuous casting process poses significant challenges in the steel industry. This reaction can lead to various defects in the cast product and adversely affect its surface quality, as well as downstream processing.

In this work, effectiveness of two approaches, namely slag dopant additions and electrochemical techniques, in suppressing the exchange …

Deep Learning In Ai Medical Imaging For Stroke Diagnosis, James Mario Guzman

Master's Theses

Enhancing medical imaging stroke diagnosis applications with artificial intelligence (AI) tools to determine lesion volume, location and clinical metadata is vital toward guiding patient treatment and procedure. A major hardship in developing stroke diagnosis AI tools is the scarcity of publicly available clinical 3D stroke datasets. Through working with Johns Hopkins University, University of Michigan’s ICPSR data repository and SJSU research, we gained access to potentially the largest 3D MRI stroke dataset with clinical metadata annotated by neuroradiologists known as ICPSR 38464. With the ICPSR 38464 dataset recently being available through institutional review board (IRB) approval or exemption, we were …

Rotorcraft Lander Fixed To A Descending Capsule Backshell, Corey Zucker

Electronic Theses and Dissertations, 2020-2023

NASA is financing a mission to study the surface of Titan, Saturn's largest moon, to investigate the terrain, chemical compositions, and potential for existent life. This mission is an exciting advancement from Mars Ingenuity, because the quadrotor lander, Dragonfly, will be the first of its kind with four coaxial rotors. Upon entry into Titan, and at near surface atmospheric conditions, Dragonfly will exit a parachute supported backshell that has shed its protective heatshield. The aerodynamics of this state are significant in comprehending the dynamics of the overall system for successful deployment into powered flight. The studies presented here examine the …

Hypersonic Aero-Optic Measurements In A High-Pressure Shock Tube, Jonathan P. Mcgaunn

Graduate Thesis and Dissertation 2023-2024

The high-pressure shock tube facility (HiPER-STAR) at the University of Central Florida (UCF) is analyzed experimentally to demonstrate the practicality of hypersonic aero-optical testing in an impulse facility without the use of an expansion nozzle or acceleration tube. The investigation analyses driver gas blending with helium and hydrogen to raise the speed of sound ratio in an attempt to increase the Mach number for aero-optics testing. HiPER-STAR has a unique ability to withstand pressures up to 1000 atm and run in a double diaphragm configuration allowing for a significant pressure differential to be created between the driver and driven sections. …

Thermal Management Strategies For Hypersonic Flight: Supercritical Co2 Jet Impingement Cooling Investigation For Leading Edge, Manoj Prabakar Sargunaraj

Graduate Thesis and Dissertation 2023-2024

This study addresses the critical need for effective thermal management in hypersonic vehicles facing intense heat at their leading edge due to high enthalpy flow. The objective is to propose an active impingement cooling system that ensures the structural stability and performance of these vehicles. This dissertation presents an in-depth exploration of the numerical simulations conducted on the hypersonic leading edge, focusing on a 3mm radius with active cooling utilizing supercritical carbon dioxide (sCO2) as the coolant. The research incorporates conjugate simulations that merge external hypersonic flow and sCO2 active cooling. Utilizing a thermodynamic non-equilibrium two-temperature model and various chemical …

On The Pursuit Of Developer Happiness: Webcam-Based Eye Tracking And Affect Recognition In The Ide, Tamsin Rogers

Honors Theses

Recent research highlights the viability of webcam-based eye tracking as a low-cost alternative to dedicated remote eye trackers. Simultaneously, research shows the importance of understanding emotions of software developers, where it was found that emotions have significant effects on productivity, code quality, and team dynamics. In this paper, we present our work towards an integrated eye-tracking and affect recognition tool for use during software development. This combined approach could enhance our understanding of software development by combining information about the code developers are looking at, along with the emotions they experience. The presented tool utilizes an unmodified webcam to capture …

Dataset For Effects Of Single-Session Practice Structure On Motor Skill Acquisition And Alpha And Beta Eeg Oscillations, Audrey Porter, Ronald V. Croce, Wayne Smith

Faculty Publications

Although it is known that practicing a motor skill updates the associated internal model, it is still unclear as to how cortical oscillations linked with the motor skill change under differing practice schedules. The current study investigated α- and β-power changes associated with motor skill acquisition. Firstly, we investigated the behavioral effects of practice on motor learning and retention during repetitive (RP) and variable (VP) practice schedules on an anticipation timing task. Secondly, we investigated changes in cortical α (10-13 HZ) and β (15-30 Hz) event-related synchronization and dyssynchronization (ERS/ERD) under RP and VP during early (EP) and late …

Providing A Framework For Seagrass Mapping In United States Coastal Ecosystems Using High Spatial Resolution Satellite Imagery, Megan M. Coffer, David D. Graybill, Peter J. Whitman, Blake A. Schaeffer, Wilson B. Salls, Richard C. Zimmerman, Victoria Hill, Marie Cindy Lebrasse, Jiang Li, Darryl J. Keith, James Kaldy, Phil Colarusso, Gary Raulerson, David Ward, W. Judson Kenworthy

OES Faculty Publications

Seagrasses have been widely recognized for their ecosystem services, but traditional seagrass monitoring approaches emphasizing ground and aerial observations are costly, time-consuming, and lack standardization across datasets. This study leveraged satellite imagery from Maxar's WorldView-2 and WorldView-3 high spatial resolution, commercial satellite platforms to provide a consistent classification approach for monitoring seagrass at eleven study areas across the continental United States, representing geographically, ecologically, and climatically diverse regions. A single satellite image was selected at each of the eleven study areas to correspond temporally to reference data representing seagrass coverage and was classified into four general classes: land, seagrass, no …

Impact Of Atmospheric Correction On Classification And Quantification Of Seagrass Density From Worldview-2 Imagery, Victoria J. Hill, Richard C. Zimmerman, Paul Bissett, David Kohler, Blake Schaeffer, Megan Coffer, Jiang Li, Kazi Aminul Islam

OES Faculty Publications

Mapping the seagrass distribution and density in the underwater landscape can improve global Blue Carbon estimates. However, atmospheric absorption and scattering introduce errors in space-based sensors’ retrieval of sea surface reflectance, affecting seagrass presence, density, and above-ground carbon (AGC_seagrass) estimates. This study assessed atmospheric correction’s impact on mapping seagrass using WorldView-2 satellite imagery from Saint Joseph Bay, Saint George Sound, and Keaton Beach in Florida, USA. Coincident in situ measurements of water-leaving radiance (L_w), optical properties, and seagrass leaf area index (LAI) were collected. Seagrass classification and the retrieval of LAI were compared after empirical line …

Topologically Optimized Electrodes For Electroosmotic Actuation, Jianwen Sun, Jianyu Zhang, Ce Guan, Teng Zhou, Shizhi Qian, Yongbo Deng

Mechanical & Aerospace Engineering Faculty Publications

Electroosmosis is one of the most used actuation mechanisms for the microfluidics in the current active lab-on-chip devices. It is generated on the induced charged microchannel walls in contact with an electrolyte solution. Electrode distribution plays the key role on providing the external electric field for electroosmosis, and determines the performance of electroosmotic microfluidics. Therefore, this paper proposes a topology optimization approach for the electrodes of electroosmotic microfluidics, where the electrode layout on the microchannel wall can be determined to achieve designer desired microfluidic performance. This topology optimization is carried out by implementing the interpolation of electric insulation and electric …

Patch-Wise Training With Convolutional Neural Networks To Synthetically Upscale Cfd Simulations, John P. Romano, Alec C. Brodeur, Oktay Baysal

Mechanical & Aerospace Engineering Faculty Publications

This paper expands the authors’ prior work[1], which focuses on developing a convolutional neural network (CNN) model capable of mapping time-averaged, unsteady Reynold’s-averaged Navier-Stokes (URANS) simulations to higher resolution results informed by time-averaged detached eddy simulations (DES). The authors present improvements over the prior CNN autoencoder model that result from hyperparameter optimization, increased data set augmentation through the adoption of a patch-wise training approach, and the predictions of primitive variables rather than vorticity magnitude. The training of the CNN model developed in this study uses the same URANS and DES simulations of a transonic flow around several NACA 4-digit airfoils …

Effect Of Platelet Length And Stochastic Morphology On Flexural Behavior Of Prepreg Platelet Molded Composites, Siavash Sattar, Benjamin Beltran Laredo, Sergii G. Kravchenko, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Prepreg platelet molding compound (PPMC) can be used to create structural grade material with a heterogeneous mesoscale morphology. The present work considered various platelet lengths of the prepreg system IM7/8552 to study the effect of platelet length on the flexural behavior of PPMC composite. A progressive failure finite-element analysis was used to understand competing failure modes in PPMC with the different platelet length. The interlaminar and in-plane damage mechanisms were employed to describe complex failure modes within the mesostructure of PPMCs. Experimental results of the flexural tests of the PPMC with different platelet length sizes were used to validate the …

Model Based Systems Engineering With A Docs-As-Code Approach For The Sealion Cubesat Project, Kevin Chiu, Sean Marquez, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

The SeaLion mission architecture team sought to create a model-based systems engineering approach to assist improving CubeSat success rates as well as for the SeaLion CubeSat project to guide an implementation for the flight software. This is important because university CubeSat teams are growing in number but often have untrained students as their core personnel. This was done using a document-as-code, or docs-as-code, approach. With this the team created tools for the systems architecture with the Mach 30 Modeling Language to create an architecture that is easy to learn and use even for newly admitted team members with little to …

Temperature Monitoring In The Refractory Lining Of A Continuous Casting Tundish Using Distributed Optical Fiber Sensors, Muhammad Roman, Hanok Tekle, Dinesh Reddy Alla, Farhan Mumtaz, Jeffrey D. Smith, Laura Bartlett, Ronald J. O'Malley, Rex E. Gerald, Jie Huang

Materials Science and Engineering Faculty Research & Creative Works

This Article Explores the Prospects of using Spatially Distributed Optical Fiber Temperature Sensors based on Rayleigh Optical Frequency Domain Reflectometry (OFDR) Technology in the Continuous Casting of Molten Steel. the Measurement Capability of the Optical Fiber Sensors in a Simulated Steelmaking Environment Was Demonstrated using a Mock Refractory-Lined Tundish, Which Was Fabricated In-House. Single-Mode Optical Fibers, Contained in Protective Stainless-Steel Tubing, Were Embedded in the Refractory Lining of the Mock Tundish. the Instrumented Tundish Was Preheated Up to a Temperature of 960 °C (Recorded at the Surface of the Working Lining) Before the Molten Steel Pour. a Low-Alloy Steel (AISI …

A Study On The Impact Of Silicon And Manganese On Peritectic Behavior In Low Alloy Steels Assisted By Mold Thermal Mapping Technology And Shell Growth Measurements, Damilola Balogun, Muhammad Roman, Rex E. Gerald, Laura Bartlett, Jie Huang, Ronald J. O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Non-Uniform Shell Growth Commonly Caused by the Peritectic Transformation in Low Carbon and Low Alloy Steels Has Been Directly Correlated with Mold Thermal Maps using a Mold Immersion Test into a Molten Steel Alloy. Mold Thermal Maps Were Obtained by Performing Real-Time Temperature Measurements with Optical Fibers Embedded 1 Mm from the Mold Working Surface. Shell Growth Measurements Were Obtained by 3D Optical Scanning of the Recovered Steel Shell Following Immersion Testing. the Effects of Silicon and Manganese on the Shell Growth and Mold Temperature Maps Have Been Examined in Relation to the Peritectic Transformation for Varying Carbon Contents. Results …

Environmental Evaluation Of The Alternative Housing Environments Of Slums, Aya Abd El-Maksoud Maan, Alaa Mohamed Shams, Mohanad Ali Fouda

Mansoura Engineering Journal

The government has built many similar units all over Egypt, especially Cairo, without considering the differences between residents, studying the areas from which they came, or preparing the neighborhoods they moved to, and they did not follow Vision 2030, which stipulates achieving sustainability in modern urban societies. The research aims to prepare alternative housing areas to be environmentally sustainable and to provide guiding principles for the design of alternative residential neighborhoods. The researcher used the applied approach to the Asmarat neighborhood as one of the built-up neighborhoods to solve the problem of slums in Cairo and was evaluated by the …

An Optimized Deep Learning-Based Framework For Predicting Diabetes Mellitus Using Ffnn, Norhan S. Elmongy, Sally M. Elghamrawy, Amr M. T. Ali-Eldin, Ali I. Eldesouky

Mansoura Engineering Journal

Diabetes mellitus (DM) is a major public health problem in Egypt, and the illness is regarded as a contemporary epidemic across the world. Diabetes is becoming more common, which is a cause for serious concern. As a result, precise and timely identification of the illness is critical. Health and research institutions have also recently expressed a serious interest in developing and implementing cutting-edge healthcare systems. Therefore, it is necessary to accurately and quickly identify the condition. To solve this issue, scientific research has been carried out, but the outcomes have fallen short. Four layers make up the proposed Diabetes mellitus …

Synthesis, Densification, And Cation Inversion In High Entropy (Co,Cu,Mg,Ni,Zn)Al2o4 Spinel, Cole A. Corlett, Nina Obradovic, Jeremy Lee Watts, Eric W. Bohannan, William Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

The synthesis, densification behavior, and crystallographic site occupancy were investigated for four different spinel-based ceramics, including a high-entropy spinel (Co_0.2Cu_0.2Mg_0.2Ni_0.2 Zn_0.2)Al₂O₄. Each composition was reacted to form a single phase, but analysis of X-ray diffraction patterns revealed differences in cation site occupancy with the high-entropy spinel being nearly fully normal. Densification behavior was investigated and showed that fully dense ceramics could be produced by hot pressing at temperatures as low as 1375°C for all compositions. Vickers' hardness values were at least 10 GPa for all compositions. The …

Microstrip Antenna Design Using Cst Optimized By Neural Network Algorithm, Hadeer. A Shoeab, Mohamed A.Mohamed, Marzouk El Said A, Ahmed. A. Kabeel

Mansoura Engineering Journal

In this paper, a general design procedure is suggested for the microstrip antennas using artificial neural networks and this is demonstrated using the rectangular patch geometry. The model was analyzed for 1733 data sets of input output parameters. 1300 samples for training and 433 samples for testing and 1500 epoch, learning rate from (0.003 to 0.005). Python was used to create and implement the ANN algorithm model. The mean error in detection of resonance frequencies (return loss peaks) was 0.144GHz on train set, and 0.116GHz on test set. The outputs of the radial basis function are optimized by varying the …

Green Walls As A Tool To Achieve Thermal Comfort In University Spaces Simulation Study Using (Design Builder) Program, Noha Roshdy Mohamed Mahmoud Atia, Mona Elwazier, Esraa Elazab

Mansoura Engineering Journal

The research introduces a study on the efficiency of green walls in achieving thermal comfort in educational interior spaces. Green walls can reduce energy consumption and carbon dioxide emissions through reducing heating and cooling loads. The research methodology depends on measuring the efficiency of green walls by using design builder a software simulation tool, to assess the thermal comfort in an educational interior space. Results show that energy decreases by 34% and carbon dioxide decreases by 30%.