Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 29491 - 29520 of 196046

Full-Text Articles in Engineering

Estimation Of Optimal Flight Trajectory In A Total Power Loss Scenario Using Proximal Policy Optimization, Eidahn Eliash Mar 2023

Estimation Of Optimal Flight Trajectory In A Total Power Loss Scenario Using Proximal Policy Optimization, Eidahn Eliash

Theses and Dissertations

Recent research has been conducted in using deep reinforcement learning algorithms to generate closed form optimal control laws for helicopters in power loss scenarios. The control laws could allow for design of various cockpit visual pilot aids if proven successful. Such pilot aids are predicted to reduce pilot workload during execution of an emergency powerless landing, and to overall increase the probability of landing safely in such an event. The proposed topic discusses the use of the PPO algorithm in order to find an optimal control policy for a helicopter in a total power loss emergency landing scenario. The task …

Go to article

Simulation And Analysis Of Dynamic Threat Avoidance Routing In An Anti-Access Area Denial (A2ad) Environment, Dante C. Reid Mar 2023

Simulation And Analysis Of Dynamic Threat Avoidance Routing In An Anti-Access Area Denial (A2ad) Environment, Dante C. Reid

Theses and Dissertations

This research modeled and analyzed the effectiveness of different routing algorithms for penetration assets in an A2AD environment. AFSIM was used with different configurations of SAMs locations and numbers to compare the performance of AFSIM’s internal zone and shrink algorithm routers with a Dijkstra algorithm router. Route performance was analyzed through computational and operational metrics, including computational complexity, run-time, mission survivability, and simulation duration. This research also analyzed the impact of the penetration asset’s ingress altitude on those factors. Additionally, an excursion was conducted to analyze the Dijkstra algorithm router’s grid density holding altitude constant to understand its impact on …

Go to article

Concept Of Operations Of Cislunar Mirror Satellites To Provide Augmented Lighting Of Dim Space-Based Objects, Alec E. Cook Mar 2023

Concept Of Operations Of Cislunar Mirror Satellites To Provide Augmented Lighting Of Dim Space-Based Objects, Alec E. Cook

Theses and Dissertations

The imaging and inspection of Resident Space Objects (RSOs) is an increasingly important mission as space-faring nations and commercial enterprises alike seek to develop means to repair and refuel spacecraft, as well as de-orbit RSOs to reduce orbital debris. Lighting conditions are not always advantageous for an imaging/inspection or repair/refuel spacecraft; therefore, the use of mirror spacecraft to reflect solar energy is proposed to illuminate dimly lit RSOs. The present research investigates the efficacy of space-based reflectors at examining spacecraft in the cislunar environment. Specific assessments include target spacecraft in geosynchronous Earth orbit and periodic orbits around selected Lagrange points, …

Go to article

Fragility Of The Florida Panhandle's Electrical Transmission Grid To Hurricanes, Zachary D. Schumann Mar 2023

Fragility Of The Florida Panhandle's Electrical Transmission Grid To Hurricanes, Zachary D. Schumann

Theses and Dissertations

The increased frequency and intensity of extreme weather events from climate change necessitates understanding impacts on critical infrastructure, particularly electrical transmission grids. One of the foundational concepts of a grid’s resilience is its robustness to extreme weather events, such as hurricanes. Resilience of the electric grid to high wind speeds is predicated upon the location and physical characteristics of the system components. Previous modeling assessments of electric grid failure were done at the systems level with assumptions on location and type of specific components. To facilitate more explicit adaptation metrics, accurate component-level information is needed. In this study, we build …

Go to article

Overall Effectiveness Superposition Theory For A Film Cooled Leading Edge, Bailey W. Hopkins Mar 2023

Overall Effectiveness Superposition Theory For A Film Cooled Leading Edge, Bailey W. Hopkins

Theses and Dissertations

Film cooling experimentation traditionally reports on the cooling performance of specialty-crafted cooling holes at various angles and array patterns. This is repeated across a variety of model geometries in an effort to provide as much information to the turbine blade designer. While this extensive database of cooling performance is helpful, its true value is found in the designer’s ability to effectively superpose the results on top of each other. One technique for predicting the performance of multiple coolant sources is film cooling superposition theory. This analytical model was employed classically by characterizing the adiabatic effectiveness across a model’s surface; however, …

Go to article

Performance Analysis And Recommended Improvements Of A Cubesat Resistojet, Alexander M. Petrocelli Mar 2023

Performance Analysis And Recommended Improvements Of A Cubesat Resistojet, Alexander M. Petrocelli

Theses and Dissertations

A small resistojet design was evaluated for its current performance and assessed for design and operational improvements. This resistojet is designed to operate on AFIT CubeSats with the intent of providing 100-200 mN of thrust at a specific impulse between 66-104 seconds. Using previously collected data and studies conducted on the design, analysis was performed to determine the current performance of this first-generation design. This provided a starting point for performance analysis over a variety of operational temperatures and pressures. This process was conducted for various heat exchanger path lengths of both the current design and two adapted path geometries. …

Go to article

Experimental And Computational Bearing Strength Of Fiber Metal Laminate With And Without Film Adhesive, Christopher L. Bellanova Jr. Mar 2023

Experimental And Computational Bearing Strength Of Fiber Metal Laminate With And Without Film Adhesive, Christopher L. Bellanova Jr.

Theses and Dissertations

This research characterized the performance of a fiber metal laminate composed of carbon fiber and stainless steel without film adhesive and compared it to a similar, previously tested, fiber metal laminate including film adhesive. Removal of the adhesive layers reduced the localized thickness, simplified manufacturing, and allowed for a 20% increase in foil thickness. Quasi-static testing was conducted in double shear, single shear protruding, and single shear countersunk configurations. The results were compared to adhesive hybrid and control samples. To study the affects of bolt tension, samples at low torque in double shear were also tested. Progressive failure samples revealed …

Go to article

Shock Induced Trailing Edge Separation Effect On F-16 Limit-Cycle Oscillation, Eric D. Stubblefield Mar 2023

Shock Induced Trailing Edge Separation Effect On F-16 Limit-Cycle Oscillation, Eric D. Stubblefield

Theses and Dissertations

No abstract provided.

Go to article

Anisotropic Characterization Of Additively Manufactured Ti 6-4 Via Tension, Compression, And Three Point Bend Experimentation, James M. Gunderson Mar 2023

Anisotropic Characterization Of Additively Manufactured Ti 6-4 Via Tension, Compression, And Three Point Bend Experimentation, James M. Gunderson

Theses and Dissertations

Titanium's ability to fill existing material gaps because of its higher strength and higher melting temperature compared to other common materials used in aircraft structures requires a need to understand the behavior of the material. Titanium's properties and the development of additive manufacturing also open an opportunity for it to be used in aerospace systems of the future in applications where traditionally manufactured titanium cannot meet the desired system requirements. Compressive, tensile, and three point bend experimental data collected from this research under varying temperatures, print orientations, print layer build heights, and surface finishes were analyzed to determine favorable material …

Go to article

Direct Collocation Methods For Comparison Of Aerothermodynamic Models Effect On Hypersonic Trajectory Optimization By The Process Of Continuation, Noor K. Khan Mar 2023

Direct Collocation Methods For Comparison Of Aerothermodynamic Models Effect On Hypersonic Trajectory Optimization By The Process Of Continuation, Noor K. Khan

Theses and Dissertations

An algorithm was created to optimize trajectories of hypersonic glide vehicles with selected cost functions by applying the process of continuation to direct orthogonal collocation methods. The trajectory was optimized to maximize the range of launch position given a fixed terminal location. The hypersonic glide vehicle system dynamics were modeled with three-dimensional, three degree of freedom equations of motion assuming no thrust and a non-rotating Earth with the control as bank angle. Three aerothermodynamic models were compared when input as path constraints to calculate the stagnation point heating rate at the nose as well as integrated for heat load. Use …

Go to article

Optimal Gyroid Infill For Space Launch, Jose R. Lopez Cordell Mar 2023

Optimal Gyroid Infill For Space Launch, Jose R. Lopez Cordell

Theses and Dissertations

This research characterizes the optimal gyroid infill design for the 1st frequency response of composite sandwich panels. Structural performance may be improved by designing the gyroid infill within the sandwich panel to have a 1st mode resonance frequency above typical launch vehicle vibrations. Ensuring a component generates a natural frequency response above a designed threshold is mandatory for space launch systems to prevent damage. The gyroid, a Triply Periodic Minimal Surface (TPMS), has the potential to provide close to isotropic stiffness in the principal axes with a minimal amount of material, making it an attractive choice for this application. This …

Go to article

Critical Infrastructure System Resiliency Modeling Using Multi-Layer Network Optimization, Spencer R. Figge Mar 2023

Critical Infrastructure System Resiliency Modeling Using Multi-Layer Network Optimization, Spencer R. Figge

Theses and Dissertations

ccurately modeling the interdependent operation of critical infrastructure systems is an effective and efficient way of proactively evaluating system vulnerabilities and resiliency. Infrastructure systems are designed to transport essential commodities from where they are produced to where they are consumed and network flow-based models are one of the most effective ways to simulate and quantify infrastructure performance. The literature is populated with proposed models that must balance accuracy of interdependent operations, capability to include real-world considerations, and computational cost. This research proposes an alternative network-flow based model called the Critical Infrastructure System Resiliency Model (CISRM) that focuses on modeling a …

Go to article

Suitability Of Earth-Moon Triangular Lagrange Point Orbits For Space Situational Awareness, Eric P. Burkhart Mar 2023

Suitability Of Earth-Moon Triangular Lagrange Point Orbits For Space Situational Awareness, Eric P. Burkhart

Theses and Dissertations

The second space race is looming on the horizon, and the Moon is again at center stage. All major space fairing nations have plans for future Lunar exploration, but this time with plans to stay. NASA’s Artemis program plans to put humans back on the Moon in 2025 and establish a Lunar base on the South pole in the 2030s. Meanwhile, China has landed a rover on the far side of the moon with a communications relay satellite in a halo orbit around the L2 Lagrange point, and partnered with Russia to build a Lunar research station on the Lunar …

Go to article

Gaseous Fuel Combustion In A Small Turbojet, Katherine A. Ashton Mar 2023

Gaseous Fuel Combustion In A Small Turbojet, Katherine A. Ashton

Theses and Dissertations

This project set out to test the suitability of natural gas as an aviation fuel by comparing how a small turbojet performed when run on traditional jet fuel versus methane. A JetCat P400, originally designed for jet fuel, was modified to run on methane. The modifications made did not succeed at getting the engine to run at normal operating speed on methane, but did get the engine to run at normal operating speeds using ethylene and ethane. It was determined a fuel and air mixing problem was hindering the engine performance when run on methane Future studies improving the fuel …

Go to article

Mechanical Properties And Performance Of A Novel Nano-Engineered Unitized Composite With Quasi-Isotropic Layup, Brian Matthew Pudlo Mar 2023

Mechanical Properties And Performance Of A Novel Nano-Engineered Unitized Composite With Quasi-Isotropic Layup, Brian Matthew Pudlo

Theses and Dissertations

Carbon nanotubes (CNTs) exhibit outstanding mechanical, electrical, and thermal properties, but are a challenge to effectively implement into macroscopic composites for aerospace applications. This research investigates the mechanical properties and performance of a newly developed hybrid NanoStitch composite, alongside a control polymer matrix composite, at room temperature. Both composite material systems investigated in this work have quasi-isotropic layup. Monotonic tension-tofailure, tension-tension fatigue, and creep tests were performed to characterize the performance of the composites under cyclic and sustained loading. Experimental results obtained for the quasi-isotropic NanoStitch composite were compared to those obtained for the quasi-isotropic control composite. The properties and …

Go to article

Probability Of Agreement As A Simulation Validation Methodology, Matthew C. Ledwith Mar 2023

Probability Of Agreement As A Simulation Validation Methodology, Matthew C. Ledwith

Theses and Dissertations

Determining whether a simulation model is operationally valid requires the rigorous assessment of agreement between observed functional responses of the simulation model and the corresponding real world system or process of interest. This research seeks to extend and formulate the probability of agreement approach to the operational validation of simulation models. The first paper provides a methodological approach and an initial demonstration which leverages bootstrapping to overcome situations where one’s ability to collect real-world data is limited. The second paper extends the probability of agreement approach to account for second-order heteroscedastic variability structures and establishes a weighted probability of agreement …

Go to article

A Reinforcement Learning Approach To A Beyond Visual Range Air Combat Maneuvering Problem, Caleb A. Taylor Mar 2023

A Reinforcement Learning Approach To A Beyond Visual Range Air Combat Maneuvering Problem, Caleb A. Taylor

Theses and Dissertations

A one-versus-one air combat maneuvering problem is considered wherein a friendly autonomous aircraft must engage and defeat an adversary autonomous aircraft in a beyond visual range environment. The Advanced Framework for Simulation, Integration, and Modeling (AFSIM) is leveraged to model the complex and interdependent operations of aircraft, sensors, and weapons utilized in beyond visual range air combat. We formulate a Markov decision process to obtain high-quality decision policies wherein our autonomous aircraft makes maneuvering and missile firing decisions. We utilize a reinforcement learning solution procedure that implements a linear value function approximation to represent state-decision pairs due to the high …

Go to article

Particle Migration In Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, Tieshu Huang Mar 2023

Particle Migration In Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, Tieshu Huang

Materials Science and Engineering Faculty Research & Creative Works

Ceramic On-Demand Extrusion (CODE) is a direct ink writing process which allows for the creation of near theoretically dense ceramic components with large cross-sections due to oil-assisted drying. Yttria-stabilized zirconia (YSZ) colloidal pastes (∼d50 ≲ 1 µm) were used in CODE to produce dense (multi-road infill and ≳ 98% relative density), large continuous volume (> 1 cm3), and high fidelity (nozzle diameters ≲ 1 mm) structural ceramic components. However, many of these printed components underwent significant particle migration after forming. The reason for this particle migration defect was investigated using the coffee-ring effect for dilute solutions and rheological methods for …

Go to article

Anisotropic Thermal Expansion In High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions, Frédéric Monteverde, Mattia Gaboardi, Federico Saraga, Lun Feng, William Fahrenholtz, Gregory Hilmas Mar 2023

Anisotropic Thermal Expansion In High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions, Frédéric Monteverde, Mattia Gaboardi, Federico Saraga, Lun Feng, William Fahrenholtz, Gregory Hilmas

Materials Science and Engineering Faculty Research & Creative Works

High-entropy (HE) ultra-high temperature ceramics have the chance to pave the way for future applications propelling technology advantages in the fields of energy conversion and extreme environmental shielding. Among others, HE diborides stand out owing to their intrinsic anisotropic layered structure and ability to withstand ultra-high temperatures. Herein, we employed in-situ high-resolution synchrotron diffraction over a plethora of multicomponent compositions, with four to seven transition metals, with the intent of understanding the thermal lattice expansion following different composition or synthesis process. As a result, we were able to control the average thermal expansion (TE) from 1.3 x 10−6 to 6.9 …

Go to article

Tempnet – Temporal Super-Resolution Of Radar Rainfall Products With Residual Cnns, Muhammed Ali Sit, Bongchul Seo, Ibrahim Demir Mar 2023

Tempnet – Temporal Super-Resolution Of Radar Rainfall Products With Residual Cnns, Muhammed Ali Sit, Bongchul Seo, Ibrahim Demir

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The temporal and spatial resolution of rainfall data is crucial for environmental modeling studies in which its variability in space and time is considered as a primary factor. Rainfall products from different remote sensing instruments (e.g., radar, satellite) have different space-time resolutions because of the differences in their sensing capabilities and post-processing methods. In this study, we developed a deep-learning approach that augments rainfall data with increased time resolutions to complement relatively lower-resolution products. We propose a neural network architecture based on Convolutional Neural Networks (CNNs), namely TempNet, to improve the temporal resolution of radar-based rainfall products and compare the …

Go to article

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A Sarkar, Hossam Abohamer, Mohammad Oyan Mar 2023

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A Sarkar, Hossam Abohamer, Mohammad Oyan

Data

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

Go to article

Evaluating The Effect Of Overburden Depth, Mining Height, And Support Density On Coal Rib Damage Using Dem Modeling, Maurice Sunkpal, Taghi Sherizadeh, Dogukan Guner Mar 2023

Evaluating The Effect Of Overburden Depth, Mining Height, And Support Density On Coal Rib Damage Using Dem Modeling, Maurice Sunkpal, Taghi Sherizadeh, Dogukan Guner

Mining Engineering Faculty Research & Creative Works

There Has Been a Global Effort in the Past Decade, Especially in Major Coal-Producing Countries, toward Understanding the Mechanics Involved in the Stability of Coal Mine Ribs. Buckling and Spalling of Mine Ribs Are Known to Have an Impact on their Stability and Degradation. the Generation, Propagation, and Coalescence of Cracks in Mine Pillar Ribs Are Significantly Affected by the overburden Depths. in Addition, the in Situ Stress Magnitudes Tend to Affect the Rib Damage Process. High Horizontal Stresses and Increased Depths Can Lead to Unfavorable Stress Conditions, Inducing Coal Mass Damage and Strength Loss. Understanding the Dynamics Involved in …

Go to article

Spray Characterization Of An Unmanned Aerial Vehicle For Agricultural Spraying, Eray Önler, Hasan Berk Özyurt, Mehmet Şener, Sezen Arat, Bülent Eker, İlker Hüseyin Çelen Mar 2023

Spray Characterization Of An Unmanned Aerial Vehicle For Agricultural Spraying, Eray Önler, Hasan Berk Özyurt, Mehmet Şener, Sezen Arat, Bülent Eker, İlker Hüseyin Çelen

The Philippine Agricultural Scientist

Sustainability and higher efficiency in crop production are possible with the use of new technologies. The use of unmanned aerial vehicles (UAVs) brings many advantages, both in terms of monitoring agricultural areas and pesticide applications, and allows for early disease and damage detection as well as its application in areas without access to conventional sprayers. This study established parameters for spraying with clean water using a DJI Agras 14 MG-1P (RTK) UAV. Droplet distribution and droplet analyses were examined in the experiments carried out at different heights (1.5, 2.0, and 2.5 m) and flow rates (10, 15, 20, 25, and …

Go to article

Design And Modeling Of A Pvdf-Trfe Flexible Wind Energy Harvester, Berkay Kullukçu, Levent Beker Mar 2023

Design And Modeling Of A Pvdf-Trfe Flexible Wind Energy Harvester, Berkay Kullukçu, Levent Beker

Turkish Journal of Electrical Engineering and Computer Sciences

This study presents the simulation, experimentation, and design considerations of a Poly(vinylidene fluoride co-trifluoroethylene)/ Polyethylene Terephthalate (PVDF-TrFe / PET), laser-cut, flexible piezoelectric energy harvester. It is possible to obtain energy from the environment around autonomous sensor systems, which can then be used to power various equipment. This article investigates the actuation means of ambient vibration, which is a good candidate for using piezoelectric energy harvester (PEH) devices. The output voltage characteristics were analyzed in a wind test apparatus. Finite element modeling (FEM) was done for von Mises stress and modal analysis. Resonance frequency sweeps, quality factors, and damping ratios of …

Go to article

Solving Turkish Math Word Problems By Sequence-To-Sequence Encoder-Decoder Models, Esi̇n Gedi̇k, Tunga Güngör Mar 2023

Solving Turkish Math Word Problems By Sequence-To-Sequence Encoder-Decoder Models, Esi̇n Gedi̇k, Tunga Güngör

Turkish Journal of Electrical Engineering and Computer Sciences

Solving math word problems (MWP) is a challenging task due to the semantic gap between natural language texts and mathematical equations. The main purpose of the task is to take a written math problem as input and produce a proper equation as output for solving that problem. This paper describes a sequence-to-sequence (seq2seq) neural model for automatically solving Turkish MWPs based on their semantic meanings in the text. It comprises a bidirectional encoder to comprehend the semantics of the problem by encoding the input sequence and a decoder with attention to extract the equation by tracking the semantic meanings of …

Go to article

Existing Transportation Infrastructure In The Central Appalachian Basin To Support Core-Cm, Bryan Gibson, Robin Baskette, Doug Kreis Mar 2023

Existing Transportation Infrastructure In The Central Appalachian Basin To Support Core-Cm, Bryan Gibson, Robin Baskette, Doug Kreis

Kentucky Transportation Center Research Report

Stretching from Tennessee northeastward through southwestern Pennsylvania, the Central Appalachian Basin’s economic fortunes have long depended on coal production. However, as the U.S. has increasingly turned toward new forms of energy to generate electricity, the region’s economy has faced inexorable headwinds. Yet, what is clear is that the extractive industries are likely to play a key role in shaping the basin’s economy in the years to come. Taking this assumption as a starting point, this paper discusses how well current transportation infrastructure can support expanded us of the basin’s carbon ore, rare earth, and critical minerals (CORE-CM), other minerals, and …

Go to article

Boomerang Algorithm Based On Swarm Optimization For Inverse Kinematics Of 6 Dof Open Chain Manipulators, Okan Duymazlar, Di̇lşad Engi̇n Mar 2023

Boomerang Algorithm Based On Swarm Optimization For Inverse Kinematics Of 6 Dof Open Chain Manipulators, Okan Duymazlar, Di̇lşad Engi̇n

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a feasible swarm intelligence algorithm is proposed that computes the inverse kinematics solution of 6 degree of freedom (DOF) industrial robot arms, which are frequently used in industrial and medical applications. The proposed algorithm is named as Boomerang algorithm due to its recursive structure. The proposed algorithm aims to reduce the computation time to feasible levels without increasing the position and orientation errors. In order to reduce the computational time in swarm optimization algorithms and increase feasibility, an alternative definition method was used instead of the DH method in defining the robot arm kinematic configuration. The effect …

Go to article

An Exploratory Study On The Effect Of Applying Various Artificial Neural Networks To The Classification Of Lower Limb Injury, Rachel Yun, May Salama, Lamiaa Elrefaei Mar 2023

An Exploratory Study On The Effect Of Applying Various Artificial Neural Networks To The Classification Of Lower Limb Injury, Rachel Yun, May Salama, Lamiaa Elrefaei

Turkish Journal of Electrical Engineering and Computer Sciences

This paper explores the application of a deep neural network (DNN) framework to human gait analysis for injury classification. The paper aims to identify whether a subject is healthy or has an injury of the ankle, knee, hip, or heel solely based on ground reaction force plate measurements. We consider how three DNNs-the multi-layer perceptron (MLP), fully convolutional network (FCN), and residual network (ResNet)-can be applied to gait analysis when the number of trainable network parameters far exceeds the number of training samples, and benchmark their performance in this context against that of shallow neural networks. The DNN architectures outperformed …

Go to article

Deep Learning To Predict The Hydration And Performance Of Fly Ash-Containing Cementitious Binders, Taihao Han, Rohan Bhat, Sai Akshay Ponduru, Amit Sarkar, Jie Huang, Gaurav Sant, Hongyan Ma, Narayanan Neithalath, Aditya Kumar Mar 2023

Deep Learning To Predict The Hydration And Performance Of Fly Ash-Containing Cementitious Binders, Taihao Han, Rohan Bhat, Sai Akshay Ponduru, Amit Sarkar, Jie Huang, Gaurav Sant, Hongyan Ma, Narayanan Neithalath, Aditya Kumar

Electrical and Computer Engineering Faculty Research & Creative Works

Fly ash (FA) – an industrial byproduct – is used to partially substitute Portland cement (PC) in concrete to mitigate concrete's environmental impact. Chemical composition and structure of FAs significantly impact hydration kinetics and compressive strength of concrete. Due to the substantial diversity in these physicochemical attributes of FAs, it has been challenging to develop a generic theoretical framework – and, therefore, theory-based analytical models – that could produce reliable, a priori predictions of properties of [PC + FA] binders. In recent years, machine learning (ML) – which is purely data-driven, as opposed to being derived from theorical underpinnings – …

Go to article

Directing The Size And Dispersity Of Silver Nanoparticles Using Kudzu Leaf Extraction Solvents, Jaley F Adkins Mar 2023

Directing The Size And Dispersity Of Silver Nanoparticles Using Kudzu Leaf Extraction Solvents, Jaley F Adkins

College of Arts & Sciences Senior Theses

Kudzu is an invasive species in the Southeastern United States. Due to the abundance of its presence and the harm it causes to ecosystems, there has been interest in repurposing the species. Since many plants have medicinal and pharmaceutical uses, the use of kudzu in nanomaterials and bioanalytical chemistry may offer a way to repurpose the invasive species for applications in health science. Potential benefits include relief for the ecosystem from which kudzu is removed and societal benefits from environmentally friendly and sustainable reducing agents required in the synthesis of nanomaterials. The prospective use of kudzu as a non-toxic alternative …

Go to article

First Prev Next Last