Engineering Commons^™

Study On Methane Adsorption/Desorption And Flow Law In The Nanopores Of Coal Based On Lammps, Shi Yu, Liu Yang, Xue Junhua, Li Shugang, Zhang Chao

Coal Geology & Exploration

In this work, the influence rules of driving force, pore size, temperature and pressure on methane adsorption/desorption and flow in coal nanopores were investigated by the molecular dynamic method based on Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS). The investigation results show that the viscosity of methane gradually decreases with the increasing driving force, while its fluidity and flow velocity increase. Meanwhile, the absolute slip length decreases and the flow tends to the non-slip state. Generally, the adsorption density of methane is independent of the driving force, but greatly affected by the gas-solid action. Methane can be adsorbed on the pore …

Application Of Ecological Geological Layer Theory In Coal Seam Protection And Ecological Restoration—An Example Of Ecological Management Practice In Plateau Alpine Mining Areas, Wang Qingwei, Xing Xiafan, Zou Mingjun, Guo Biao, Zhao Xin, Wang Tong

Coal Geology & Exploration

The ecological management of alpine permafrost area in plateau is a global problem, with few precedents for coal resource protection while ecological management. In this paper, the following results achieved in the ecological management in Muli area of Qinghai Province were understood in accordance with the idea of systematic engineering for the purpose of ecological environmental protection, with consideration to the protection of residual coal resources. Specifically, study was conducted on the ecological vulnerability of Muli mining area to damage and the difficulty of restoration under the control of natural climatic characteristics. Meanwhile, the characteristics of soil erosion and vegetation …

Processing Of Coal Mine Csamt Data With Wide Field Electromagnetic Method, Zhu Yunqi, Li Diquan, Liu Zuiliang, Zhang Xin

Coal Geology & Exploration

A CSAMT detection test was carried out for a coal mine with V8 multi-functional electrical instrument. Due to the serious electromagnetic interference within the area, the Cagniard apparent resistivity was low in quality. In order to improve the quality and utilization rate of data, authors attempted to process the CSAMT data collected by V8 with the wide field electromagnetic method, which used single-component method and ratio method (Electric field divided by magnetic field) to calculate apparent resistivity. The results showed that there was some deviation between the single-component wide field apparent resistivity and the actual terrestrial electricity because the emission …

Experimental Study On Heat Transfer Performance Of Double U-Shaped Buried Tube Heat Exchanger, Li Lei, Zhang Weidong, Xu Shuanhai, Zhao Yongzhe, Dang Dongsheng, Wang Qilong, Gou Li, Lei Yanzi

Coal Geology & Exploration

Double U-shaped buried tube heat exchanger (DUBTHE) are prone to pipe crossing and thermal short-circuiting in the practical applications, resulting in the reduced heat transfer performance and directly affecting the operational efficiency of shallow geothermal heat pump system. Based on the initial line thermal average temperature, thermal conductivity theory and slope method, and taking a shallow geothermal heat pump project in Xi'an as the engineering background. Then, this study investigate the effects of initial average temperature, thermal conductivity and volumetric heat capacity of rock-soil, and tube clamp spacing on the heat transfer performance of DUBTHE through field geotechnical thermal response …

Quality Assessment Of Resistivity Monitoring Data Of Coal Mines, Cui Weixiong, Yuan Bo

Coal Geology & Exploration

Resistivity monitoring of coal mines is an important technical means of preventing water hazards on the roof and floor of a mining face. However, it is difficult to guarantee high-quality resistivity data monitored and collected due to the complex and extremely strong electromagnetic interference in the monitoring environment, as well as the limitations of the maximum emission current for the purpose of safe coal mining. To select and utilize highly reliable data from the massive data monitored daily, this study compared and analyzed the advantages and disadvantages of commonly used methods for quality assessment of data obtained using the DC …

Key Technology Of Automatic Loading And Unloading System For Dual-Pipe Directional Drilling Rig And Its Application In Soft–Fragmentized Coal Seam, Li Kun, Ting Ren, Yao Yafeng

Coal Geology & Exploration

To improve the automatic level and efficiency of loading and unloading of drilling rigs during the construction of dual-pipe directional drilling, an automatic loading and unloading device of dual pipe was developed to realize the fully automatic loading and unloading of drilling rigs under different working conditions and to solve the technical problems of loading and unloading the drill pipes and casing simultaneously during the dual-pipe directional drilling. Meanwhile, the device structure and control system was designed to restrict the load applied to the device during construction with the end-compliant technique. Besides, the key boundary conditions of the control program …

Effects Of Mos2 On The Matrix Performance Of Hot-Pressed Fe-Based Diamond Drill Bit, Zhang Wenjiao, Tan Songcheng, Pan Bingsuo, Jin Xin, Kong Xiangqing, Long Shanglin

Coal Geology & Exploration

Diamond drill bit is a common rock breaking tool in various exploration works, but the diamond in drill bit has poor thermal stability. As heat is constantly generated during the drilling process, the self-cooling of diamond drill bit under the condition of drought and water shortage is very important to improve the drilling efficiency. In order to decrease the friction coefficient between bit matrix and rock interface under dry drilling condition and reduce the thermal damage of diamond during drilling, molybdenum disulfide (MoS₂) was added into the Fe-based diamond bit matrix, and research was performed for the effects …

Study On Construction Of Microbial Solid-Free Drilling Fluid System And Its Borehole Wall Enhancement Mechanism, Li Zhijun, Zhu Mao, Zhi Jingzi, Han Yi, Chen Junxiu, Zhao Gan

Coal Geology & Exploration

Broken formations are often encountered during drilling, which is prone to the instability of wellbore wall and induces serious downhole accidents. Enhancing the cementing force between the broken blocks and improving the mechanical strength of the surrounding rocks of a wellbore is one of the effective ways to solve the instability of wellbore in this type of formation, for which the microbially induced calcite precipitation (MICP) technology provides a good reference. To this end, the growth of Bacillus pasteurii in the solid-free drilling fluid system was analyzed through experimental study, and thus a solid-free drilling fluid suitable for its growth …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Effect Of Amf-Maize Combination On Water And Salt Distribution In Soil Under The Dump Reconstruction Mode Of “Topsoil-Aquifer-Aquitard”, Bi Yinli, Yang Wei, Ke Zengming, Wu Chao, Li Mingchao, Xue Chao

Coal Geology & Exploration

The distribution of soil water and salt severely affects the ecological reconstruction and plant configuration modes at coal mine dumps. To investigate the characteristics of soil water and salt distribution under the three-layer reconstruction mode of “topsoil-aquifer-aquitard” in coal mine dump under the influence of mycorrhizal plants, laboratory soil column test was conducted, in which the soil was treated in three ways: planting maize and inoculating with arbuscular mycorrhizal fungi (YM+AMF), planting maize (YM) only, and no planting of maize + no inoculation with bacteria (CK). The results showed that: (1) The different treatments have no significant effect on the …

Effects Of Actinomycetes On Root Growth Of Onobrychis Viciaefolia And Rhizosphere Soil Fertility In Dumping Site Of Open-Pit Mine In Arid Area, Cao Shumiao, Wang Qiangmin, Yang Fan, Yang Jian, Zhang Haihan, Xu Ganggang, Zhu Shibin

Coal Geology & Exploration

In order to resolve the issue of soil degradation in the dumping site of open-pit coal mine in arid area, the effects of actinomycetes on the root growth and rhizosphere soil fertility of onobrychis viciaefolia in the dumping site of Xinjiang Heishan Open-pit Coal Mine were investigated by highly efficient actinomycete inoculation and in-situ pot experiment. The results show that: (1) Under the drought conditions, actinomycetes inoculation could significantly promote the development of root morphology and the growth of onobrychis viciaefolia. Compared with the control without actinomycetes inoculation, the total root length, average root diameter, root surface area and …

Identifying The Optimal Range Of Fine Ground Waste Glass As Cement Replacement, Stephanie Taylor

Undergraduate Research Symposium Posters

The viability of finely ground waste glass as cement replacement is linked to the amount of time the concrete is allowed to cure. Testing beyond 91 days was rare, with only one study using an entire year. Replacement levels below 25% provided the best results in compressive strength. The parameters for future testing derived from this literature review will use ASTM C39/C39M-21 to test the compressive strength of specimens with 0%, 10%, 15%, 20% and 25% finely ground glass replacing OPC with measurements taken at 1, 7, 28, 56, 90, 182 and 365 days of curing.

Performance Of A Solar Seawater Distillation With A Triangle Prism Cover And A Fin-Type Absorber, Risse Entikaria Rachmanita, Miftah Khoirul Umam

Makara Journal of Technology

Solar-powered distillation is a seawater distillation method that utilizes solar heat as its main energy source for the purpose producing freshwater and a by-product of the distillation process in the form of salt. This study aims to determine the performance of a solar seawater distillation design with a semi-batch system by combining a fin-type absorber plate and a triangular prism cover. This design is equipped with a reflector and absorber plate, which has a surface area of 0.3969 m2 with a volume capacity of seawater that can be accommodated in a basin of ±24 liters. It uses a knockdown system …

Motion Control Simulation Of A Hexapod Robot, Weishu Zhan

Dartmouth College Master’s Theses

This thesis addresses hexapod robot motion control. Insect morphology and locomotion patterns inform the design of a robotic model, and motion control is achieved via trajectory planning and bio-inspired principles. Additionally, deep learning and multi-agent reinforcement learning are employed to train the robot motion control strategy with leg coordination achieves using a multi-agent deep reinforcement learning framework. The thesis makes the following contributions:

First, research on legged robots is synthesized, with a focus on hexapod robot motion control. Insect anatomy analysis informs the hexagonal robot body and three-joint single robotic leg design, which is assembled using SolidWorks. Different gaits are …

Infrastructure-As-Code: Automating The Deployment On Aws Using Terraform, Srikar Pratap

Masters Projects

In my master’s project, I used Terraform to create a scalable infrastructure on Amazon Web Services (AWS) for my personal website. Terraform is an open-source infrastructure-as-code (IAC) tool that allows you to create, manage and provision infrastructure resources, such as virtual machines, storage accounts, networks, and more, across multiple cloud providers and on-premises data centers using a declarative configuration language. A scalable infrastructure is important because it enables a system or application to handle increasing amounts of traffic or workload without experiencing performance issues or downtime. It ensures that the system remains responsive, available, and reliable as an organization grows …

Machine-Learning-Based Model For Hurricane Storm Surge Forecasting In The Lower Laguna Madre, Cesar E. Davila Hernandez, Jungseok Ho, Dong-Chul Kim, Abdoul Oubeidillah

Civil Engineering Faculty Publications

During every Atlantic hurricane season, storms represent a constant risk to Texan coastal communities and other communities along the Atlantic coast of the United States. A storm surge refers to the abnormal rise of sea water level due to hurricanes and storms; traditionally, hurricane storm surge predictions are generated using complex numerical models that require high amounts of computing power to be run, which grow proportionally with the extent of the area covered by the model. In this work, a machine-learning-based storm surge forecasting model for the Lower Laguna Madre is implemented. The model considers gridded forecasted weather data on …

Cobalt/Carbon Composites As Sulfur Hosts For High-Performance Lithium-Sulfur Batteries, Yun-Rui Yang, Huan-Huan Dong, Zhi-Qiang Hao, Xiang-Xi He, Zhuo Yang, Lin Li, Shu-Lei Chou

Journal of Electrochemistry

Lithium-sulfur (Li-S) battery is one of the promising energy storage devices because of its high energy density. However, the sulfur cathode suffers from sluggish electrochemical reaction kinetics, slow charge transfer, large volume expansion and severe shuttle effect of lithium polysulfides inevitably resulting in low reversible capacity, poor rate performance and short cycle life, limiting its practical applications. Herein, the recent progress of cobalt/carbon composites, including cobalt nanoparticles and cobalt single atoms, as the sulfur host materials in Li-S batteries is overviewed. In general, cobalt plays the role of electrocatalyst, which inhibits the shuttle effect of lithium polysulfides, accelerates the electrochemical …

Recent Advances Of Functional Electrolyte Additives For Lithium-Sulfur Batteries, Xiu-Qing Zhang, Shuai Tang, Yong-Zhu Fu

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries have become one of the most promising next-generation battery systems due to their high energy density and low cost. However, the application of Li-S batteries still faces critical challenges, such as the low conductivities of S and Li₂S, shuttle effect of polysulfides and dendrite growth of Li, etc. The optimization of the electrolyte can ameliorate the electrolyte|electrode interphase, conveniently regulating the parasitic reaction and improving the performance of the resultant batteries. The functional additives in electrolytes provide chances to tune the interphase and even the redox mechanism to improve the performance of the batteries. In …

Metals And Alloys As Catalytic Hosts Of Sulfur Cathode For Lithium-Sulfur Batteries, Zhen-Yu Wang, Xue-Ping Gao

Journal of Electrochemistry

Lithium-sulfur batteries are recognized as one of the most promising next-generation energy storage devices, owing to the high theoretical energy density of 2600 Wh·kg^–1. However, their application has been seriously hindered by the sluggish electrochemical reaction kinetics of elemental sulfur and discharged products (Li₂S₂/Li₂S), and the notorious “shuttle effect” of soluble intermediate lithium polysulfide species, leading to poor cycle stability, low sulfur utilization and inferior coulombic efficiency. Introducing catalytic hosts into sulfur cathode is an efficient path to propel the conversion of sulfur-contained species, thus preventing the dissolution and loss of active-sulfur …

Ultraviolet-Initiated In-Situ Cross-Linking Of Multifunctional Binder Backbones Enables Robust Lithium-Sulfur Batteries, Sha Li, Xiao Zhan, Gu-Lian Wang, Hui-Qun Wang, Wei-Ming Xiong, Li Zhang

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries show attractive prospects owing to their high theoretical energy density, but their commercialization still faces such challenges as lithium polysulfides shuttling, severe volume change and considerable polarization. These stubborn issues place higher demands on each component in the battery, such as the development of multifunctional binders with superior mechanical properties. Herein, ethoxylated trimethylolpropane triacrylate was firstly introduced into sulfur cathodes, and in-situ cross-linked by ultraviolet (UV) curing combined with traditional polyvinylidene difluoride binder (i.e., forming a binary binder, denoted as c-ETPTA/PVDF) to construct high-loading and durable Li-S batteries. The covalently cross-linked ETPTA framework not only significantly enhances …

Digital Patient Engagement At A Perioperative Surgical Home Implemented Community Hospital, Srinivasan Sridhar, Amy Mount Hunter, Bernadette Mccrory

Patient Experience Journal

Patients in rural areas typically require more perioperative ‘optimization’ for surgery. The rural healthcare systems often overwhelmed with coordinating perioperative services and deliver less than optimal surgical outcomes. This is due to limited supporting microsystems and ability to effectively engage and track patients over the 120-day perioperative period to limit post-surgical complications. The study assessed longitudinal patient engagement within a newly established Perioperative Surgical Home (PSH) at a rural community hospital serving 10+ surrounding counties to identify barriers and best practices for engagement. A digital patient engagement platform was implemented and used to assess longitudinal patient outcomes and engagement from …

Global Water Level Variability Observed After The Hunga Tonga-Hunga Ha’Apai Volcanic Tsunami Of 2022, Adam Thomas Devlin, David A. Jay, Stefan Talke, Jiayi Pan

Civil and Environmental Engineering Faculty Publications and Presentations

The eruption of the Hunga Tonga-Hunga Ha'apai volcano on 15 January 2022 provided a rare opportunity to understand global tsunami impacts of explosive volcanism and to evaluate future hazards, including dangers from “volcanic meteotsunamis” (VMTs) induced by the atmospheric shock waves that followed the eruption. The propagation of the volcanic and marine tsunamis was analyzed using globally distributed 1 min measurements of air pressure and water level (WL) (from both tide gauges and deep-water buoys). The marine tsunami propagated primarily throughout the Pacific, reaching nearly 2 m at some locations, though most Pacific locations recorded maximums lower than 1 m. …

Numerical Modeling And Analysis Of Strengthened Steel–Concrete Composite Beams In Sagging And Hogging Moment Regions, Ayman El-Zohairy, Suzan Mustafa, Hesham Shaaban, Hani Salim

Faculty Publications

Strengthening of composite beams is highly needed to upgrade the capacities of existing beams. The strengthening methods can be classified as active or passive techniques. Therefore, the main purpose of this study is to provide detailed FE simulations for strengthened and unstrengthened steel–concrete composite beams at the sagging and hogging moment regions with and without profiled steel sheeting. The developed models were verified against experimental results from the literature. The verified models were used to present comparisons between the effect of using external post-tensioning and CFRP laminates as strengthening techniques. Applying external post-tensioning at the sagging moment regions is more …

Human Factors Engineering, Robert S. Keyser

KSU Distinguished Course Repository

Human Factors Engineering is a comprehensive survey of human factors theory, research, and applications which are of particular relevance to Quality and Engineering Management. Emphasis will be placed on operator constraints in the design of work processes, workplaces, and instrumentation.

Solar Sailing Adaptive Control Using Integral Concurrent Learning For Solar Flux Estimation, Luis Mendoza Zambrano

Doctoral Dissertations and Master's Theses

In the interest of exploiting natural forces for propellant-less spacecraft missions, this thesis proposes an adaptive control strategy to account for unknown parameters in the dynamic modeling of a reflectivity-controlled solar sail spacecraft. A Lyapunov-based control law along with integral concurrent learning is suggested to accomplish and prove global exponential tracking of the estimated parameters and states of interest, without satisfying the common persistence of excitation condition, which in most nonlinear systems cannot be guaranteed a priori. This involves estimating the solar flux or irradiance from the Sun to account for uncertainty and variation over time in this value. To …

Regenerative Medicine For Tendon/Ligament Injuries: De Novo Equine Tendon/Ligament Neotissue Generation And Application, Takashi Taguchi

LSU Doctoral Dissertations

Tendon and ligament injuries are debilitating conditions across species. Poor regenerative capacities of these tissues limit restoration of original functions. The first study evaluated the effect of cellular administration on tendon/ligament injuries in horses using meta-analysis. The cellular administration was effective in restoring ultrasonographic echogenicity and increasing vascularity during early phase of healing. Additionally, it improved microstructural organization of healed tissue in terms of cellularity and fiber alignment. However, the study did not support its use for increasing rate of return to performance, expression/deposition of tendon-specific genes/proteins, or mechanical properties.

The findings led to the second study that engineered implantable …

Service-Learning For Infrastructure Improvements In Herald Square - Accuracy, Gabriela Funes, Tanvir Ahmed, Annie Benson, William A. Loyed

Eagle Showcase: Excellence in Service-Learning (Archived)

Generation of Terrestrial LiDAR model to assist in the design of public infrastructure.

Service-Learning Modeling For Infrastructure Improvements In Herald Square, Shane M. Henry, Hayden A. Holder, Joel Juarez, Teresa M. Macias, Zenan C. Merritt, Luke H. Ward, Aniya A. Williams

Eagle Showcase: Excellence in Service-Learning (Archived)

Use of terrestrial LiDAR scanner in Service-Learning project to assist the design of public infrastructure.

Pole Placement Of Linear Multidimensional Systems Using Unlimited Rank Output Feedback, Jasur Usmonovich Sevinov, Okila Khusanovna Boeva

Chemical Technology, Control and Management

The problem of placing poles in linear multidimensional systems using a feedback matrix of unlimited rank is considered. The effect of output feedback of indefinite rank of the characteristic polynomial of a system with several variables is studied. The results are then used to obtain a recurrent pole placement algorithm without any restrictions on the rank of the output feedback matrix used. The algorithm is based on the pseudo-inverse concept of obtaining solutions to systems of linear equations using the least squares method and is computationally efficient.

Structural Design And Fabrication Of A Test Chamber To Test Ppes For Effective Particle Filtration, Matthew G. Adharsingh

Honors College Theses

This research project aims to design and fabricate a test chamber for testing Personal Protective Equipment (PPE) to ensure effective particle filtration. The chamber has a special purpose, which is to measure ultrafine and submicron particles concentration in the air and test the ergonomic design of PPE based on its effective filtration. The project also considers the environmental aspects of the chamber such as the level of noise and vibration. The chamber will be designed to measure upstream and downstream particle count. Initially, the chamber was going to be made from wood, but the research team encountered difficulties in the …