Engineering Commons^™

Development Of Preservative-Treated Cross-Laminated Timber And Lignin-Reinforced Polyurethane-Adhesive For Glued Laminated Timber, Samuel Oluwafemi Ayanleye

Theses and Dissertations

Interest in the use of mass timber in building and construction is growing worldwide, this is due to the structural integrity and reduced environmental footprint of timber-based structures. Concerns associated with the biological and environmental degradation of mass timber necessitate the development of adequate protection strategies to ensure the durability of these products. Preservative treatment is a proven technique that increases the durability and performance of wood in-service and can also be applied to large-sized timber panels such as cross-laminated timber (CLT). Therefore, this study focused on investigating the feasibility of treating prefabricated 3- and 5-layer CLT panels with Copper-azole …

Ide-Based Learning Analytics For Assessing Introductory Programming Skill, Phyllis J. Beck

Theses and Dissertations

Providing a sufficient level of personalized feedback on students' current level of strategic knowledge within the context of the natural programming environment through IDE-based learning analytics would transform learning outcomes for introductory programming students. However, providing sufficient insight into the programming process was previously inaccessible due to the need for more complex and scalable data collection methods and metrics with a wider variety for understanding programming metacognition and the full programming process.

This research developed a custom-built web-based IDE and event compression system to investigate two of the five components of a five-dimensional model of cognition for programming skill estimation …

Tuning The Metal/Acid Functionalities In Hzsm-5 For Efficient Dehydroaromatization, Genwei Chen

Theses and Dissertations

The increasing production of natural gas liquids attracts both academia and industry to develop on-purpose techniques converting those light alkanes to value-added chemicals. Dehydroaromatization is an alternative path for light alkane conversion to produce aromatics but still lacks active and stable catalysts. This work aims at the development of efficient dehydroaromatization catalysts by tuning the metal/acid bifunctionality of the Pt/HZSM-5 catalyst. Additionally, through co-processing light alkane with ammonia during the dehydroaromatization process, this study also proposes a new reaction system that could directly link the C-N bond for nitrile synthesis.

The results suggested that the activity, selectivity, and stability of …

Heat And Mass Transfer Modeling Of High-Temperature Moving-Bed Thermochemical Reactors, David Korba

Theses and Dissertations

With the global deployment of renewable energy generation at record rates, clean energy is steadily becoming competitive with its fossil-fuel counterparts. However, further expansion is limited by the inherent intermittency of renewable energy sources (solar, wind, wave, etc.), which typically do not match with daily and seasonal variations of global (and local) energy demand. Thermochemical energy storage (TCES) has demonstrated strong potential in being a technological pathway to provide on-demand process heat and handle the intrinsic variations in renewable energy generation and energy demand. TCES works on the premise of excess renewable heat driving an endothermic reduction reaction, in which …

Assessing And Predicting The Students’ Systems Thinking Preference: Multi-Criteria Decision Making And Machine Learning, Siham Tazzit

Theses and Dissertations

The 21st century is marked by a technological revolution that features digital implementation and high interconnectivity between systems across different domains, such as transportation, agriculture, education, and health. Although these technological changes resulted in modern systems capable of easing individuals’ lives, these systems are increasingly complex, and that increased complexity is only expected to continue. The increased system complexity is due to the rapid exchange of information between subsystems, which creates high interconnectivity and interdependence between the subsystems and their elements. Workforce skill sets, as a result, must be modified appropriately to ensure the systems’ success. Systems Thinking is an …

Direct Measurement Of The 114cd(N, Gamma)115cd Cross Section In The 1 Ev To 300 Kev Energy Range, Kofi Tutu Addo Assumin-Gyimah

Theses and Dissertations

The large thermal cross section of cadmium makes it ideal for many practical applications where screening of thermal neutrons is desired. For example, in non-destructive assay techniques, or for astrophysical studies of the s-process. All such applications require precise knowledge of the neutron-capture cross section on cadmium. Although there are some data on neutron-capture cross sections particularly at thermal energies and at energies relevant for astrophysics, there is very little data at most other energies. Further, the evaluated cross sections from the ENDF and JENDL databases disagree at high energies. Therefore, there is a critical need for precise knowledge of …

Ruggedness Test Of A New Standardized Test Method For Abrasion Resistance Of E-Textiles, Erin Parker

Theses and Dissertations

Standard test methods provide product developers with information regarding materials' suitability for different purposes. Typically, current standards are suitable for determining the mechanical properties of new materials. However, in the case of electronic textiles (E-Textiles) and wearable technology (wearables), adding conductive components with added functionality makes utilizing textile standards difficult, and these standards will not provide information on mechanical and electrical properties of conductive elements. New standards for E-Textile and wearables testing are needed to ensure product developers can obtain the information necessary to make informed decisions about new products. Standards organizations such as the American Society for Testing and …

Re(Engineering) Student Success: Constructing Knowledge On Students’ Experiences In Engineering Education Programs To Encourage Holistic Student Success, Shaylin Williams

Theses and Dissertations

If a group of engineering deans were asked whether students at their institutions were successful and why, what information might they immediately or subconsciously use to measure or gauge the engineering students’ success? If only academic performance outcomes like GPA, individual course grades, or graduation rate race to their minds, then their rationale aligns with the majority of researchers. My research seeks to shift the mindset that frames engineering student success mainly within the boundaries of academic performance measures. By measuring students’ perceived autonomy, competence, social integration and relatedness within their programs, and aspirations after graduation, one can more accurately …

Assessment Of Light Weight Deflectometer For Low Volume Roads Experiencing Rapidly Increased Traffic Levels, Margarita Ordaz

Theses and Dissertations

When evaluating low volume roads (LVRs), structural capacity emphasis is minimal since deterioration typically results from environmental factors. However, in cases where LVR’s experience rapidly increased traffic loading, structural condition becomes important. The research objective was to determine whether the Light Weight Deflectometer (LWD) can be used as a structural evaluation tool for LVRs in the aforementioned conditions. This study explored the capability of LWD equipment in evaluating major factors that influence flexible pavement structural capacity: load induced deterioration, soil moisture, and asphalt temperature. Falling Weight Deflectometer (FWD) and LWD tests were performed to measure pavement structural condition. LWD was …

A New Saturation-Based Framework For Compaction Quality Control, Kevin Clark Miller

Theses and Dissertations

Field compaction control is arguably the most common yet critical quality control procedure in geotechnical engineering. Since the early 1930s, the systematic process for performing quality control of compacted soils has often been performed by measuring the in-place dry unit weight (or density) and as-compacted soil moisture content after placement in a fill. However, the current practice overlooks several facts resulting from comparing soil prepared and compacted in the laboratory to soils placed and compacted in the field. These issues include comparing the compaction energy in the lab versus what is applied in the field, and the behavior of saturated …

Ai-Enabled Modeling And Monitoring Of Data-Rich Advanced Manufacturing Systems, Abdullah Al Mamun

Theses and Dissertations

The infrastructure of cyber-physical systems (CPS) is based on a meta-concept of cybermanufacturing systems (CMS) that synchronizes the Industrial Internet of Things (IIoTs), Cloud Computing, Industrial Control Systems (ICSs), and Big Data analytics in manufacturing operations. Artificial Intelligence (AI) can be incorporated to make intelligent decisions in the day-to-day operations of CMS. Cyberattack spaces in AI-based cybermanufacturing operations pose significant challenges, including unauthorized modification of systems, loss of historical data, destructive malware, software malfunctioning, etc. However, a cybersecurity framework can be implemented to prevent unauthorized access, theft, damage, or other harmful attacks on electronic equipment, networks, and sensitive data. The …

Elucidating Self-Assembly Of Semiconducting Polymers In The Presence Of A Low Molecular Weight Gelator, Madhubhashini Lakdusinghe

Theses and Dissertations

Semiconducting polymers with a conjugated backbone are important for energy storage, conversion, and biomedical field applications. The self-assembly process of these polymers in solutions depends on the polymer concentration and quality of the solvent. The electrical properties of thin films obtained from the solution phase depend on the self-assembled process. Thin films of conjugated polymer gels with percolating networks of self-assembled structures display improved electrical conductivities. In this dissertation, we studied the impact of the secondary gel matrix formed by a low molecular weight gelator, on the self-assembly of conjugated polymers, the preservation of assembled structures in dried gel films …

Gas Permeability Of 3d Stitched Composites For Cryogenic Applications, Shuvam Saha

Theses and Dissertations

This research aims to investigate the influence of 3D through-thickness stitching on the gas permeability and transverse microcracking of cryogenically cycled carbon/epoxy composites. 3D through-thickness stitching can be used to improve the interlaminar properties of polymer matrix composites (PMCs) and produce lightweight, unitized structures for cryogenic storage tanks. To fully utilize stitched composite structures for these applications, their inherent gas permeability challenges must be understood. Therefore, in this study, the stitched composites' damage evolution and gas permeability was experimentally characterized under a) pure thermal stress, b) thermal and uniaxial mechanical stress, and c) thermal and biaxial mechanical stress. Helium gas …

Multi-Objective Design Optimization Of Two Configurations Of Ventricular Shunts For Hydrocephalus, Will Kirkpatrick

Theses and Dissertations

Hydrocephalus is developed when the flow of cerebrospinal fluid is obstructed in the ventricles and a pressure build-up is generated within the brain. Ventricular shunts are used to remove excess fluid from the brain, but these shunts have a common problem of failure due to the shunt being obstructed by the build-up of astrocytes. To address this, two sets of 27 designs of ventricular shunts were identified and analyzed with parameters that could potentially reduce obstruction risks. The performance of these designs was examined using fluid simulations on these two sets of 27 designs. One set explored close-tipped shunt designs, …

Effect Of Environmental And Geometrical Factors On Microstructure, Desiccation Cracking, And Carbon Dioxide Flux In Clays, Charles Clayton Goodman

Theses and Dissertations

Studying the effects of extreme conditions, such as high temperatures and low humidity, on soil properties is important to various disciplines, including geotechnical engineering, soil science, waste management, crop management, and ceramics. The goal of this research is to investigate the effect of environmental and geometrical factors on microstructure, desiccation cracking, and CO₂ flux in clays. The objectives of this research are threefold. (1) Understand the effects of temperature on the microstructure of clay soils; (2) develop a standardized procedure for studying desiccation cracking in a laboratory setting with reliable and repeatable results; and (3) develop an environmental chamber …

The Effects Of Mechanical Strain On Vascular Calcification And The Canonical Wnt Pathway, Hannah E. Douglas

Theses and Dissertations

Cardiovascular disease is a significant health crisis, representing 32% of deaths worldwide in 2019. Vascular calcification (VC), a major contributor to cardiovascular disease, is a regulated biomineralization process whose exact mechanisms are unknown. Additionally, vascular smooth muscle cells (VSMCs) significantly contribute to VC by undergoing a phenotypic switch and differentiating into osteoblast-like cells. When factors like hypertension cause disturbed laminar flow in the body’s vasculature, the mechanical stress promotes the phenotypic switch and calcification of VSMCs via mechanotransduction. VC is also induced by the Wnt pathway, which is activated via mineral imbalance and mechanical stimulation. However, the exact mechanisms behind …

Nanoscale Modeling Of Membrane Systems Under Mechanical Deformation In Traumatic Brain Injury Using Molecular Dynamics, Anh Thi Ngoc Vo

Theses and Dissertations

Neuronal membrane disruption and mechanoporation are nanoscale damage mechanisms that critically affect brain cell viability during traumatic brain injury (TBI). These nanoscale cellular impairments are elusive in experiments and necessitate in silico approaches such as molecular dynamics (MD) simulations. Implementing MD, this research aims to investigate the effects of different key factors related to membrane deformation and damage, including force field resolutions, lipid compositions, and loading conditions.

To examine the impact of force field resolution, MD deformation simulations were conducted on 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) lipid bilayer membranes, using all-atom (AA), united-atom (UA), and coarse-grained Martini (CG-M) force fields. The mechanical responses …

Designing Bioinspired Materials With Tunable Structures And Properties From Natural And Synthetic Polymers, Anandavalli Varadarajan

Theses and Dissertations

Biological systems are composed of complex materials which are responsible for performing various functions, such as providing structural support, mobility, functional adaptation to the environment, damage repair, and self-healing. These complex materials display excellent mechanical properties and can rapidly adapt to external stimuli. Thus, nature inspires in terms of source materials, functions, and designs to develop new-generation structural and functional materials. Polymers (natural or synthetic) are excellent sources of developing materials to mimic the functions of soft segments in biological systems. This dissertation focuses on synthesizing and characterizing two different materials with tunable structures and properties: complexes from natural polysaccharides …

Application Geological Strength Index (Gsi) Quantification Method On The Characterization Of Carbonate Rock Mass, Singgih Saptono, Danu Mirza Rezky

Journal of Sustainable Mining

Determining GSI as a representation of the presence of rock mass in slope analysis continues to develop. The development of the quantitative GSI method was carried out because the basic (qualitative) GSI values were deemed too subjective so the results from the use of the quantitative GSIwere expected to be more objective and accurate. The method used is to combine 3 GSI quantitative methods to find GSI based on surface conditions and joint structure. The results showed that the Quantitative GSI value was smaller than the GSI predictive value (qualitative). The GSI approach with RQD and UCS parameters is also …

Inéire: An Interpretable Nlp Pipeline Summarizing Inclusive Policy Making Concerning Migrants In Ireland, Arefeh Kazem, Arjumand Younus, Mingyeong Jeon, Muhammad Atif Qureshi, Simon Caton

Articles

Reaching marginal and other migrant communities to elicit their political views and opinions is a well-known challenge. Social media has enabled a certain amount of online activism and participation, especially in societies with abundant multicultural identities. However, it can be quite challenging to isolate the voice of the migrant in English-speaking countries, especially with an abundance of content in English on social media. In this paper, we pursue a case study of Ireland’s Twitter landscape, specifically migrant and native activists. We present a methodology that can accurately ( >80% ) isolate the Irish migrant voice with as little as 25 …

An Occupant-Centric Energy Modeling And Simulation In Office Buildings, Seddigheh Norouziasl

LSU Doctoral Dissertations

Building energy use is highly sensitive to occupants’ energy-related behaviors, including their presence and interaction with different building systems. Modeling and simulation of occupants’ energy-related behavior play an essential role in accurately predicting building energy consumption. Simplifying occupancy parameters in building performance simulation tools can lead to discrepancies between the simulated and actual building energy performance. The main goal of this research is to simulate the occupants’ energy-related behavior in office buildings and utilize the occupancy data to accurately predict building energy performance. Our objective is to increase building energy efficiency and reduce energy consumption while ensuring occupants' comfort, especially …

New Statistical Methodology For Capacitor Data Analysis Via Lcr Meter, Usama Afzal, Muhammad Aslam

Neutrosophic Systems with Applications

This research work introduces a novel methodology to establish the relationship between capacitance and resistance when dealing with imprecise data obtained from LCR meters. The proposed relationship is based on the principles of neutrosophic statistics, enabling the utilization of interval data of resistance or capacitance without losing the indeterminacy of the intervals. By employing this relationship, we can accurately determine capacitance values from interval data of resistance, thereby generating more flexible and informative graphs. Additionally, we have applied the neutrosophic analysis method to the interval data of resistance to further enhance our findings. The comparative analysis demonstrates the superiority of …

New Types Of Soft Sets” Hypersoft Set, Indetermsoft Set, Indetermhypersoft Set, And Treesoft Set”: An Improved Version, Florentin Smarandache

Neutrosophic Systems with Applications

This is an improved paper of [10], where we recall the definitions together with practical applications of the Soft Set and its extensions to HyperSoft Set, IndetermSoft Set, IndetermHyperSoft Set, and TreeSoft Set.

New Statistical Methodology For Capacitor Data Analysis Via Lcr Meter, Usama Afzal, Muhammad Aslam

Neutrosophic Systems with Applications

This research work introduces a novel methodology to establish the relationship between capacitance and resistance when dealing with imprecise data obtained from LCR meters. The proposed relationship is based on the principles of neutrosophic statistics, enabling the utilization of interval data of resistance or capacitance without losing the indeterminacy of the intervals. By employing this relationship, we can accurately determine capacitance values from interval data of resistance, thereby generating more flexible and informative graphs. Additionally, we have applied the neutrosophic analysis method to the interval data of resistance to further enhance our findings. The comparative analysis demonstrates the superiority of …

New Types Of Soft Sets” Hypersoft Set, Indetermsoft Set, Indetermhypersoft Set, And Treesoft Set”: An Improved Version, Florentin Smarandache

Neutrosophic Systems with Applications

This is an improved paper of [10], where we recall the definitions together with practical applications of the Soft Set and its extensions to HyperSoft Set, IndetermSoft Set, IndetermHyperSoft Set, and TreeSoft Set.

Analyzing Pseudomonas Aeruginosa With Bacteriophage Tags Using Photoacoustic Flow Cytometry, Jennifer C. Schinke

Electronic Theses and Dissertations

The number of daily bacterial infections is climbing and the CDC explains that this is due to the antibiotic-resistant threat in the United States. Finding a faster way of bacterial identification is necessary as it currently takes 1-4 days for a medical lab to culture and identify bacteria. Photoacoustic flow cytometry (PAFC) can be used as an alternative method resulting in swift identification within an hour (Edgar, 2019). Pseudomonas aeruginosa, cell line PA01, will be coated in up to a few hundred red dyed phages making it detectible by the photoacoustic flow cytometry system. Bacteriophages (phages) are viruses that …

Effects Of Machining Parameters Of C45 Steel Applying Vegetable Lubricant With Minimum Quantity Cooling Lubrication (Mqcl), Mayur A. Makhesana, Prashant J. Bagga, Kaushik M. Patel, Jaime Taha-Tijerina

Informatics and Engineering Systems Faculty Publications

One of the most significant performance indicators for measuring the machinability of materials is tool wear and surface roughness. Choosing the best combination of cutting parameters can help reduce production costs, which is what the manufacturing industry is interested in. At the same time, industries are always looking for an alternative to conventional flood cooling since its use creates an environmental burden and health concerns for the operators. Therefore, vegetable oil-based minimum quantity cooling lubrication (MQCL) is considered a cutting environment. Sunflower oil is utilized as base fluid in MQCL and applied to the cutting zone through a nozzle. The …

Polyethylene Glycol-Mediated Directional Conjugation Of Biological Molecules For Enhanced Immunoassays At The Point-Of-Care, Dheerendranath Battalapalli, Purbali Chakraborty, Disha Jain, Umut A. Gurkan, Robert A. Bonomo, Mohamed S. Draz

Faculty Scholarship

Rapid and reliable point-of-care (POC) diagnostic tests can have a significant impact on global health. One of the most common approaches for developing POC systems is the use of target-specific biomolecules. However, the conjugation of biomolecules can result in decreased activity, which may compromise the analytical performance and accuracy of the developed systems. To overcome this challenge, we present a polymer-based cross-linking protocol for controlled and directed conjugation of biological molecules. Our protocol utilizes a bifunctional thiol-polyethylene glycol (PEG)-hydrazide polymer to enable site-directed conjugation of IgG antibodies to the surface of screen-printed metal electrodes. The metal surface of the electrodes …

Performance Of Geopolymer Mortar Using Developed Dry Geopolymer-Cement By A Combination Of Alkaline Solid Activators, Mariam Farouk Ghazy, Metwally Abd-Allah Abd-Elaty, Sara Mohamed Mostafa

Mansoura Engineering Journal

This experimental study investigates the possibility of using a combination of solid activators to produce dry powder geopolymer cement. Fly ash (FA) and/or ground granulated blast furnace slag (GGBS) were employed as precursors. Sodium metasilicate pentahydrate (NSP), calcium hydroxide (CH) and sodium carbonate (NC) were used as alkaline solid activators. Meanwhile, the effect of using a combination of solid activators to prepare one-part geopolymer mortars was studied by using three different curing methods and compared with the traditional corrosive alkali solutions that are used as activators in two-part geopolymer mortar, and also compared with Portland cement (PC) mortar mix. Fresh …

Design Of Stormwater Bmps For Surface And Groundwater Protection Based On Site-Scale Soil Properties: Phase I, Kelly Kibler, Lisa Chambers, Melanie Beazley

Florida DOT

Much of Earth’s nutrient cycling takes place in soils. Characteristics of soils control physical, chemical, and biological processes that determine rates of nutrient fluxes, storage, or transformation. As remediation of excess nutrients in stormwater runoff is one function of stormwater Best Management Practices (BMPs), the soil profile constitutes one of the most important factors of BMP design. Variation observed in BMP effectiveness (e.g., why one BMP design works effectively in one place and not another) can often be explained by variations in the soil profile, either through direct means or by a soil’s influence on hydraulics of stormwater flow through …