Engineering Commons^™

Investigating Combined Extreme Weather Effects On Solar Module Through Hardware And Simulink Performance Evaluation, Amir Botros

Boise State University Theses and Dissertations

Worldwide adoption of photovoltaic (PV) cells, which use the photovoltaic effect to convert solar energy into electricity, has led to their emergence as a significant source of electricity production. As the number of PV installations continues to grow, understanding the impact of environmental factors on solar module performance becomes paramount.

Factors such as intermittency, cloud cover, shading, and nighttime unavailability significantly affect the efficiency and longevity of solar modules. However, there is a shortage of research connecting extreme weather conditions to overall module performance, hindering informed implementation decisions.

This study addresses the need for continuous monitoring of solar systems under …

The Effects Of Restaurant Drive-Through Vehicle Mobile Emissions On Air Quality, Tryston Nychol Sellers Calder

Boise State University Theses and Dissertations

Studies and regulations on vehicles have become more prominent as concerns continue to rise over mobile emissions. Most recognizable is the U.S. EPA Near-Road monitoring network that began in 2010. The focus of most air quality studies has been vehicular traffic on freeways. However, drive-through sales skyrocketed in 2020 because they were the only way for restaurants to stay in busy during the pandemic. Drive throughs have continued to remain pivotal in fast food restaurant sales accounting for majority of sales. This demand has brought upon the question of how much drive-throughs contribute to mobile emissions, specifically in the form …

Investigating The Influence Of Surface Finishing Methods On Corrosion Of Additively Manufactured Ss316l, Joshua R. Fadeley

Boise State University Theses and Dissertations

Additive Manufacturing (AM), namely with metal, has seen a surge in growth and interest over recent years. A wide array of industries is developing new products to take advantage of this budding technology. In order to enable adoption of this technology, understanding of the differences of AM versus traditional manufacturing on the resultant materials properties of printed components is important. The work done for this study fell into two separate categories of work.

The first effort of this work involved the installation, certification, and operation of the first laser powder bed fusion (LPBF) printer at the Center for Advanced Energy …

Novel Sensors And Measurement Techniques For Thermal Properties In Extreme Environments, Katelyn Wada

Boise State University Theses and Dissertations

Advancements in thermal properties analysis is crucial for improvement of existing and next generation reactors, space exploration, and environmental safety. Extreme environments pose a great hurdle for instrumentation to measure real time thermal properties due to the extreme temperatures, high radiation, and variable electromagnetic environments. Nevertheless, measurement systems are tremendously important for the design, P.E.rformance, and safety considerations of nuclear fuels, space crafts, and deep sea/deep earth drilling. Thermal properties may change significantly in these environments creating challenging problems for temperature and thermal conductivity measurement systems. A recent focus has surrounded improvements in such systems for accurate determination of temperature …

A Comprehensive Review On Shale Studies With Emphasis On Nuclear Magnetic Resonance (Nmr) Technique, Yujie Yuan, Reza Rezaee, Mei-Fu Zhou, Stefan Iglauer

Research outputs 2022 to 2026

Multi-scale shale studies put a significant emphasis on high-resolution investigations from nanometer to decametre scales. Despite that multiple advanced techniques have been used in shale studies, they are mostly limited to the detection scopes and have restricted capacity for high-resolution characterization of shale nanopores with substantial heterogeneity. Therefore, it remains a challenge for accurate resource estimation in unconventional shales. The nuclear magnetic resonance (NMR) is an advanced technique enabling non-destructive and fast measurements, and has the advantage of high-resolution evaluation of shale formations and nanopore structure. Petrophysical studies using NMR have made breakthroughs in shale studies. However, multi-scale shale investigations …

Fatigue Behaviour Of Load-Bearing Polymeric Bone Scaffolds: A Review, Hamed Bakhtiari, Alireza Nouri, Mehrdad Khakbiz, Majid Tolouei-Rad

Research outputs 2022 to 2026

Bone scaffolds play a crucial role in bone tissue engineering by providing mechanical support for the growth of new tissue while enduring static and fatigue loads. Although polymers possess favourable characteristics such as adjustable degradation rate, tissue-compatible stiffness, ease of fabrication, and low toxicity, their relatively low mechanical strength has limited their use in load-bearing applications. While numerous studies have focused on assessing the static strength of polymeric scaffolds, little research has been conducted on their fatigue properties. The current review presents a comprehensive study on the fatigue behaviour of polymeric bone scaffolds. The fatigue failure in polymeric scaffolds is …

Wastewater Treatment Plants: The Missing Link In Global One-Health Surveillance And Management Of Antibiotic Resistance, Abdolmajid Gholizadeh, Mehdi Khiadani, Maryam Foroughi, Hadi Alizade Siuki, Hadi Mehrfar

Research outputs 2022 to 2026

Introduction: As a global public health crisis, antibiotic resistance (AR) should be monitored and managed under the One-Health concept according to the World Health Organization (WHO), considering the interconnection between humans, animals, and the environment. But this approach often remains focused on human health and rarely on the environment and its compartments, especially wastewater as the main AR receptor. Wastewater treatment plants (WWTPs) not only are not designed for reliving AR but also provide appropriate conditions for enhancing AR through different mechanisms. Methods: By reviewing the research-based statistics on the inclusion of WWTPs in the One-Health/AR program crisis, this paper …

An Improved Genetic Algorithm Based Fractional Open Circuit Voltage Mppt For Solar Pv Systems, Aakash Hassan, Octavian Bass, Mohammad A. S. Masoum

Research outputs 2022 to 2026

To extract the maximum power from solar PV, maximum power point tracking (MPPT) controllers are needed to operate the PV arrays at their maximum power point under varying environmental conditions. Fractional Open Circuit Voltage (FOCV) is a simple, cost-effective, and easy to implement MPPT technique. However, it suffers from the discontinuous power supply and low tracking efficiency. To overcome these drawbacks, a new hybrid MPPT technique based on the Genetic Algorithm (GA) and FOCV is proposed. The proposed technique is based on a single decision variable, reducing the complexity and convergence time of the algorithm. MATLAB/Simulink is used to test …

Residual Trapping Of Co2, N2, And A Co2-N2 Mixture In Indiana Limestone Using Robust Nmr Coreflooding: Implications For Co2 Geological Storage, Amer Alanazi, Auby Baban, Muhammad Ali, Alireza Keshavarz, Stefan Iglauer, Hussein Hoteit

Research outputs 2022 to 2026

Carbon capture and sequestration (CCS) in geological formations is a prominent solution for reducing anthropogenic carbon emissions and mitigating climate change. The capillary trapping of CO2 is a primary trapping mechanism governed by the pressure difference between the wetting and nonwetting phases in a porous rock, making the latter a key input parameter for dynamic simulation models. During the CCS operational process, however, the CO2 is prone to contamination by impurities from various sources such as surfaces (e.g., pipelines and tanks) and the subsurface (e.g., existing natural gas). Such contamination can strongly influence the overall CO2 wettability, storage capacity, and …

Small Scale Desalination Technologies: A Comprehensive Review, Hamed Kariman, Abdellah Shafieian, Mehdi Khiadani

Research outputs 2022 to 2026

In recent decades, problems related to fresh water has become a very important issue for humans. Small-scale desalination (SSD) systems, besides large-scale desalination (LSD) systems, fulfil an important role in meeting freshwater demand by eliminating the cost of transmission and have the advantage of treating water on-site. In this study, for the first time, a comprehensive review of previous studies has been carried out on SSD systems (less than 25 m3/d water production). These systems are powered using renewable, non-renewable or hybrid sources of energy, incorporating different treatment technologies such as: reverse osmosis (RO); electro dialysis (ED); capacitive deionization (CDI); …

Thermo-Hydraulic Performance Evaluation Of A Naca 63-015 Heat Exchanger With Shark Denticles As Surface Textures, Aakash S. Hurry, Kevin Hayward, Ferdinando Guzzomi, Kanishk Rauthan, Ana Vafadar

Research outputs 2022 to 2026

In this study, the effect of using bio-inspired surface texturing as a technique to further enhance the efficiency of a single Plate Fin Heat Exchanger (PFHX) was investigated experimentally. By using biomimicry across disciplines, the denticle, which is a body adaptation from shark skin for enhanced hydrodynamics, was identified as a surface texture to be used on the fin of a PFHX. A smooth NACA 63-015 PFHX (HX0) was used as baseline for thermo-hydraulic performance comparisons. Initially, three PFHXs (HX1, HX2 and HX3), consisting of arrays of denticles upscaled to different scale factors, were designed and printed in ABS plastic …

Understanding Social Vulnerability To Natural Hazards Through Machine Learning And Dynamic Spatiotemporal Analysis, Donglei Wang

Boise State University Theses and Dissertations

Natural hazards pose significant threats to communities, impacting livelihoods and property. Socially vulnerable communities are disproportionately affected by these hazards, highlighting the importance of considering social vulnerability in hazard risk assessment. Research on multi-hazards risk assessment, and social vulnerability can provide a comprehensive understanding of hazards and local vulnerability to support the reduction of disaster suffering overall. This thesis presents a comprehensive study conducted in Idaho, US, to examine the regional multi-hazards risk and assess the progression of social vulnerability metrics in wildfire-affected areas in a case study.

The first part of the research proposes a multi-hazards risk assessment methodology …

Av Operation And Energy Efficiency Improved Through The Evaluation And Demonstration Of Av Sensor Technology, Nicholas Brown

Dissertations

The majority of states have passed legislation or have signed an executive order enacting safe testing, development, and deployment of level 4 and level 5 autonomous vehicles (AVs) in accordance with SAE standard J3016, which has led to an increase in the frequency of AV testing. The major driving force behind the push for AVs on public roads appears to be the increases the number of AVs on the road to decrease the chances of fatalities from distracted drivers. There are reports of disengagement from companies, which are required to report them to operate within California. The continuance of disengagements …

A Multi-Objective Stochastic Programming Model For Resilient And Sustainable Supply Chains Under Uncertainty, Mohammad H. Majdfaghihi

Dissertations

Supply chain resilience (SCRES) and sustainable supply chain management (SSCM) have garnered significant attention in the field of Supply Chain Management (SCM) science. This heightened interest is largely attributable to the increasing frequency and severity of uncertainty and disruptions in global supply chains. Resilience is a beneficial approach to managing uncertainties and preparing for and mitigating the adverse consequences of Supply Chain (SC) disruptions. Sustainability is a key concept in SCM, driven by governmental regulations and heightened stakeholder and customer concerns for environmental and societal well-being. Studies on SCRES have traditionally focused on preparing for and reacting to disruptions and …

Sustainable Diamond-Like Carbon Fabricated Gravure Cylinders For Printing Fine Lines Of Electrodes And Graphic Structures, Chandramohan Seetharamiah Srinivasaraju

Dissertations

The main objective of this work is to evaluate the potential of Diamond-Like Carbon (DLC) as an alternative to chrome for use on gravure cylinders. DLC coatings consist of carbon atoms, arranged into a diamond-like structure that closely resembles that of natural diamond. In contrast to chrome, DLC is environmentally friendly. The focus of the study is to determine the viability of DLC as a substitute material for chrome to be used on gravure cylinders by determining key material properties and evaluating printing performance.

In the first research paper, four DLC variants (Standard DLC, A-DLC, S-DLC, and Organic Silica) and …

Investigating The Effects Of Collagen Alignment And Tricalcium Phosphate Incorporation On Osteoblast Cell Response, Kathryn Elizabeth Bock

Theses and Dissertations

Every year, over 20 million people globally are affected by bone tissue loss due to disease or trauma. Bone tissue engineering (BTE) is touted as a promising approach to promote bone tissue repair and regeneration. In this realm, development of collagen-based scaffolds incorporated with a bioceramic is often attempted to generate tissue scaffolds that resemble the organic and inorganic composition of native bone. In addition, a variety of different collagen processing techniques have been employed to produce anisotropically aligned scaffolds that can provide the essential biochemical and structural cues to guide cell response. While there have been numerous studies on …

Viscosity Of Adsorbent Slurries For Washcoating Applications, Nitish Chauhan

Theses and Dissertations

The viscosity of adsorbent slurries is pivotal in understanding their rheological behavior, yet, the research on adsorbent slurry viscosity has been limited. This study addresses this gap by analyzing porous and non-porous solutes' behavior in solvents and then applying it to the washcoating adsorbents on ceramic substrates. By examining MIL-101 (Cr), glass beads, silica nanoparticles, and Titania, the study aims to comprehend the viscosity variations of each solute in the solvents, water and ethanol. A key observation from this study was the significant role of wetting in determining viscosity, as initial results found that MIL-101 (Cr) exhibited the highest viscosity …

Characterization Of Human Mobility From Cellular Data, Zaid Matloub

Theses and Dissertations

This dissertation investigates human mobility patterns using crowd-sourced cellular network data from different Metropolitan Statistical Areas (MSAs) in the United States, spanning the Houston, New York-Newark, NJ City, and 13 other significant MSAs. By focusing on prominent spatial mobility parameters highlighted in existing literature, the study unveils consistent findings regarding the predictability of human mobility across diverse time scales and geographic regions. The research underscores the significance of selecting appropriate sampling thresholds based on the mobility parameters being examined, the size of the dataset, and available computational resources. Through a meticulous analysis, it emerges that while values such as mean …

Task Optimization Utilizing Digital Transformation Concepts - Automation Project Execution Via Agile Methodology, Anthony Steven Maiello

Theses and Dissertations

Task Optimization via the use of automated process improvements is becoming more widespread as more industries lean into the concepts surrounding digital transformation. This shift also necessitates a complementary adaptation in project management methodologies to support the rapid and ever-changing environment, requirements, and innovations. This thesis examines the effectiveness of Agile methodology in managing digital automation projects, with a specific focus placed on process improvements with systems engineering. It accomplished this by contrasting the original model, designed and derived utilizing traditional project management techniques, with the proposed model which is a direct result of the application of Agile project practices. …

Path Planning Development Framework For Mobile Robots, Lauren-Ann Elizabeth Graham

Theses and Dissertations

Planetary exploration relies on methods of path planning to achieve autonomous navigation in hazardous environments. Simulating harsh terrain, real-time varying physics, and robotics applications is vital for testing control algorithms here on Earth. Robotics Operating System (ROS) is a set of software libraries and tools that allow you to build and simulate robotic applications. Utilizing ROS, Gazebo, and Blender, a rough terrain simulation framework is created to explore and compare path planning algorithms using various desired robots and maps. ROS supports multiple path planning algorithms given its open-source abilities. This research focuses on path planning implementation of Proportional-Integral-Derivative (PID) control …

Assessing The Thermodynamic Potential Of Deep Eutectic Solvents In The Absorption Of Greenhouse Gases Through Computational Methods., Thomas Michael Quaid

Theses and Dissertations

Greenhouse gas (GHG) capture is a fundamental technology in the fight against climate change. Some species of devastating GHGs like fluorinated compounds are released directly to the air from industrial processes. Some GHGs are co-produced in sustainably derived biofuels which require absorptive upgrading. The development of more efficient, cost effective, and environmentally friendly methods of capturing GHG’s from pollutant sources and industrial streams is of utmost importance in the fight against climate change. Deep eutectic solvents have entered the separations stage as potential disruptors to conventional solvent choices for a variety of applications. Deep eutectic solvents (DES) are compounds of …

An Exploratory Pilot Study On Generating An Emergency Evacuation Vr Experience For A Real-Life Building Without Existing Bim Or Floor Plans, Naveed Ahmed

UNLV Theses, Dissertations, Professional Papers, and Capstones

With the rising frequency of active shooter incidents and fire hazards in both private and public facilities, it is crucial to establish a strategy for an effective emergency evacuation response for minimizing its consequences. Modern technological advancements such as virtual reality (VR) and game engines offer the potential to serve as valuable evacuation training tools within a virtual environment, aiding real-time decision making. Previous studies highlight the benefits of using VR simulations for emergency evacuation training, enhancing safety; however, two challenging factors exist that hinder their application. First, many existing structures (especially for older buildings) lack an available computer model/approach. …

Unraveling Water Quality Issues In The Colorado River Basin: Utilizing Remote Sensing Satellite Images, Statistical, And Machine Learning For Improved Monitoring, Godson Ebenezer Adjovu

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research was aimed at exploring innovative and cost-effective tools in understanding the spatiotemporal variability of water quality parameters in the Colorado River Basin (CRB), which includes the Colorado River and major reservoirs and lakes in the USA including Lake Mead. The river which arises in the state of Colorado and empties into the Republic of Mexico at the Gulf of California, is a source of water to seven US states and the Republic of Mexico and provides water to about 40 million people and million acres of farmlands in seven states in the western US and the Republic of …

Effects Of Loading Age And Transverse Reinforcement Ratio On Collapse Resistance Of Rc Frame Beams Under High Sustained Loads, Taiga Cibulka

UNLV Theses, Dissertations, Professional Papers, and Capstones

Catastrophic progressive collapses of reinforced concrete (RC) frame buildings can be triggered by column failure. In such a scenario, the beams supported by the failed column shall be able to form an alternative load path guarding the building against collapse. The compressive arch action passively generated after losing a column has been identified as an effective load-resisting mechanism for axially restrained RC frame beams. However, the beams need to continuously carry the redistributed gravity loads sustaining in the structural system. Past research predominantly focused on the short-time collapse resistance of RC beams and little is known about their time-dependent response …

Travel Time Theory For Traffic Conservation Laws With Applications, Sergio Contreras

UNLV Theses, Dissertations, Professional Papers, and Capstones

Travel time is an important concept in various intelligent transportation system (ITS) applications. The concept is used in a wide array of applications, such as system planning, system performance, and optimization. Reducing the time required to travel between different points on a network is an important goal. Benefits include reducing time wasted in traveling, and keeping travelers satisfied. Thus, studying and reducing travel time in ITS is beneficial in different applications.

The classic density-based Lighthill Whitman Richards (LWR) equation for modeling traffic flow is the starting point in this dissertation. A more recent travel time dynamics function built on top …

Investigating Van Der Waals Josephson Junctions With 2h-Nbse2 And 1t’-Wte2, Kristine Lorraine Haley

UNLV Theses, Dissertations, Professional Papers, and Capstones

Josephson junctions have garnered significant attention due to their unique electronic properties and applications in quantum devices. In this thesis, we investigate the fabrication processes and characterization of two-dimensional (2D) Josephson junctions consisting of layered van der Waals materials: niobium diselenide (2H-NbSe₂) and few layered tungsten ditelluride (1T’-WTe₂). The reduction of dimensionality can bring forth unique characteristics in certain materials that are not seen in their bulk counterparts, making them prime candidates for physical exploration. 2H-NbSe₂ is an s-wave superconductor at temperatures near and below 7 K. 1T’-WTe₂ is a semimetal in bulk but …

Investigating A Passive Treatment System For The Removal Of Nutrients From Urban Runoff, Jasminn Gray

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Environmental Protection Agency recognizes urban runoff as a major contributor of surface water pollution with nutrients as the second largest cause of surface water impairment in the United States. While a water quality standard of 100 lbs/day total phosphorus load allocation for all nonpoint sources is permitted for the Las Vegas Valley (LVV) under the National Pollutant Discharge Elimination System, currently there is not a counterpart standard for nitrogen. With the continued development of the LVV and the depletion of the quantity of water in Lake Mead due to the ongoing drought, the concentrations of phosphorus and nitrogen species …

Virus Removal And Characterization During Secondary Treatment At A Full-Scale Plant, Tyler Hill

UNLV Theses, Dissertations, Professional Papers, and Capstones

Virus removal is paramount to water reuse applications and nearly all water reuse applications require extensive pathogen reduction because of high influent concentration, difficulty of detection and distinguishing infectivity. Typically, regulations stipulate virus attenuation that require the implementation of multi-barrier advanced treatment trains and award these reductions in log notation called log reduction values (LRVs). Reduction of virus concentrations are not awarded for virus removal that may occur in wastewater treatment steps which precede water reuse units such as activated sludge secondary biological treatment.

A systematic literature review was performed and virus reduction at full-scale wastewater treatment plan was monitored …

Application Of Biochar For Antibiotic-Free Nutrient Recovery From Source-Separated Human Urine, Sayeda Ummeh Masrura

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, the application of biochar as a soil amendment has gained attention as a potential solution for nutrient management and environmental remediation. Biochar, a carbon-rich material produced through the pyrolysis of biomass under oxygen-limited conditions, exhibits unique physicochemical properties making it an effective sorbent for nutrients and contaminants. Its high surface area, porosity, and stability provide an ideal matrix for nutrient retention and release, as well as the immobilization of pollutants. One area of particular interest is the application of biochar for nutrient recovery from source-separated human urine. Source separation of urine has gained momentum as a sustainable …

Optimized Indoor Temperature In Office Buildings Through Personalized Thermal Comfort Modeling, Raviteja Patchava

UNLV Theses, Dissertations, Professional Papers, and Capstones

Building occupants experience varying thermal comforts at static indoor set-point temperatures due to variances in preferences, needs, and activities, both within and among individuals. Despite advancement in smart building control systems, many building occupants remain dissatisfied with indoor temperatures. This study developed and created an optimization model to predict the optimized indoor temperature preferences in multiple-occupancy settings. To achieve this, personalized thermal comfort models for each occupant in a multiple occupancy space were developed. The personal comfort models serve as the foundation for predicting their individual thermal preference and developing indoor temperature optimization model. When predicting the individual thermal preference, …