Engineering Commons^™

Evaluation Of Unmanned Aerial Vehicle Flight Parameters That Impact Stockpile Volume Computations, Nicole Marie Hastings

Theses and Dissertations

Stockpile volumes are monitored by their companies as the product (i.e., aggregate, soil) is moved in and out of the facilities to ensure minimal product loss. Companies are mandated to report product movement to the government to ensure that the aggregate and soil is going where it is supposed to go. Many tools are used to monitor stockpile volumes including truck scales (to weigh incoming and outgoing trucks), light detection and ranging (LiDAR), Global Navigation Satellite System (GNSS) equipment, and unmanned aerial vehicle (UAV) photogrammetry. These processes give a good estimate of stockpile volumes. Errors in these estimates typically come …

A Tunable System For High Frequency Bioimpedance Plethysmography, Daniel H. Tebbs

Theses and Dissertations

Bioimpedance measurements are useful for determining a variety of biological conditions. By accounting for small impedance variations due to the arterial pulse, the effect of the blood can be studied more closely. The quasi-circulator system presented enables monitoring of pulsatile impedance changes with input frequencies above 1 MHz. The adjustable Rmatch allows for dynamic tuning of the system to increase sensitivity. By tuning Rmatch to be near the match point, the pulsatile signal in the output magnitude can be amplified, and tuning Rmatch to be at the match point causes the pulsatile signal in the output phase to be amplified. …

Combined Design And Dispatch Optimization For Nuclear-Renewable Hybrid Energy Systems, Daniel Clyde Hill

Theses and Dissertations

Reliable, affordable access to electrical power is a requirement for almost all aspects of developed societies. Challenges associated with reducing carbon emissions has led to growing interest in nuclear-renewable hybrid energy systems (N-RHES). Much work has already been done in suggesting and analyzing various N-RHES using a variety of optimization techniques and assumptions. This work builds upon previous techniques for simultaneous combined design and dispatch optimization (CDDO) for hybrid energy systems (HES). The first contribution of this work is the development and application of sensitivity analysis tailored to the combined design and dispatch optimization problem. This sensitivity analysis cover uncertainty …

Simulating Incident Management Team Response And Performance, Daniel Jarvis

Theses and Dissertations

The effectiveness of Incident Management Teams (IMT) in reducing the duration and impact of traffic incidents is well-documented. The capacity of large-scale simulation models to illustrate the negative effects of these incidents on vehicle delays and excess user costs (EUC) is also widely recognized. However, there is a gap in research integrating large-scale simulation modeling with IMT performance analysis. This study uses the Multi-Agent Transport Simulation (MATSim) framework to simulate the impact of incidents and evaluate the performance of IMT across the regional network of Utah's Wasatch Front, analyzing their operation in various hypothetical situations. Our findings validate the role …

Designing Macromolecules On Nanoparticle Surfaces: In Situ Formation Of Silica Grafted With Star Chains, Fatimah Aldakheel, Konstantinos Ntetsikas, Arief Yudhanto, Gilles Lubineau, Nikos Hadjichristidis

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Herein, we report the synthesis and characterization of asymmetric 3-arm homostar (3h-star) and 3-miktoarm star (3μ-star) chains grafted on silica nanoparticles simultaneously with the formation of silica. We employed high-vacuum anionic polymerization techniques to synthesize well-defined ω-triethoxysilyl (TEOS)-terminated (PS)2PS, (PS)2PI, and (PS)2PI-b-PS macromonomers (polystyrene (PS) and polyisoprene (PI)), which upon hydrolysis/condensation of the terminal TEOS yielded the grafted silica nanoparticles. The molecular characteristics of the precursors (PS)2PS-TEOS, (PS)2PI-TEOS, and (PS)2PI-b-PS-TEOS were determined by proton nuclear magnetic resonance (NMR) spectroscopy and size-exclusion chromatography (SEC). The formation of 3h-star and 3μ-star@SiO2 nanoparticles was demonstrated by Fourier transform infrared spectroscopy, ²⁹Si solid-state …

Superhyperfunction, Superhyperstructure, Neutrosophic Superhyperfunction And Neutrosophic Superhyperstructure: Current Understanding And Future Directions, Florentin Smarandache

Neutrosophic Systems with Applications

The n-th PowerSet of a Set {or Pn(S)} better describes our real world, because a system S (which may be a company, institution, association, country, society, set of objects/plants/animals/beings, set of concepts/ideas/propositions, etc.) is formed by sub-systems, which in their turn by sub-sub-systems, and so on. We prove that the SuperHyperFunction is a generalization of classical Function, SuperFunction, and HyperFunction. And the SuperHyperAlgebra, SuperHyperGraph are part of the SuperHyperStructure. Almost all structures in our real world are Neutrosophic SuperHyperStructures since they have indeterminate/incomplete/uncertain/conflicting data.

Some Special Refined Neutrosophic Ideals In Refined Neutrosophic Rings: A Proof-Of-Concept Study, Murhaf Riad Alabdullah

Neutrosophic Systems with Applications

In this research, we created notions of a refined neutrosophic prime (completely prime, semiprime, and completely semiprime) ideal in a refined neutrosophic ring. If R(I1, I2) is a refined neutrosophic ring, then each ideal of R(I1, I2) has the form J+KI1+LI2 are ideals of the classical ring R. The objective of this work is to find the necessary and sufficient condition on classical ideals J, L and K that makes J+KI1+LI2 a prime (completely prime, semiprime, and completely semiprime) ideal in R(I1, I2). We studied some of the elementary properties of these concepts and the most important properties that link …

Ncmpy: A Modelling Software For Neutrosophic Cognitive Maps Based On Python Package, Ilanthenral Kandasamy, Divakar Arumugam, Aryan Rathore, Ateeth Arun, Manan Jain, Vasantha .W.B, Florentin Smarandache

Neutrosophic Systems with Applications

Cognitive maps are a vital tool that can be used for knowledge representation and reasoning. Fuzzy Cognitive Maps (FCMs) are popular soft computing techniques used to model large and complex systems, and they can aid in explainable artificial intelligence (AI). FCMs, however, cannot model the indeterminacy that arises in a system due to various uncertainties. Neutrosophic Cognitive Maps (NCMs), upgraded FCMs that could model indeterminacy, were introduced to address this issue. NCMs are a generalization of FCMs, a field of cognitive science firmly based on neural networks. NCMs have been used to solve a wide range of problems. NCMs were …

Finding Diffs Of Pull Request Commits, Chalinee Karawek, John Businge

Undergraduate Research Symposium Posters

Github is a social network that allows developers' projects to be forked for various uses, such as developing the existing repository or use the code to steer development into a new direction. As more forks are made, the more bugs that can occur due to new pull requests not synchronizing with the upstream repository. PaReco is a clone detection tool by Ramkisoen et al. (Ramkisoen et al. 2022) that identifies the changes inside the files inside a pull request by performing diff on every file. However, in this study, we take a different approach to identifying the changes inside the …

Development Of An Automated Delivery System To Apply Copper Sulfate Crystals Using Precision Dry Fertilizer Application Technology, Kevin Charles Wise

Theses and Dissertations

The digenetic trematode, Bolbophorus damnificus, poses a substantial threat to catfish aquaculture, causing significant economic losses. Infestations lead to suppressed feed consumption, secondary bacterial infections and poor production performance. Survey data reveals widespread infestation in the in the southeastern United States. Current control strategies involve the application of a concentrated copper sulfate solution to reduce snail populations which serve as the first intermediate host of the trematode life cycle. This study aimed to improve treatment efficacy by developing a granular copper sulfate application system. A modified Gandy fertilizer applicator, equipped with a programmable control system, demonstrated accurate distribution of copper …

Improved Methodology For Conducted Emi Assessment Of Power Electronics And Line Impedance Measurement, Mark Anthony Didat

Theses and Dissertations

Electromagnetic Interference (EMI), primarily common mode (CM), is problematic in a wide range of electronic circuits due to its propensity to radiate, particularly in high power applications. It is routine for much effort and resources to be dedicated to its characterization and reduction as EMI compliance is a requirement for most electronic systems and devices, including power electronics. Many well-known factors contribute to a system’s EMI performance including intentional coupling from system components as well as unintentional coupling from parasitics. Sources of intentional coupling may include Y-capacitors intended to mitigate EMI as part of a filter. Unintentional coupling is more …

Design, Development, And Validation Of A Perfusion-Compression Bioreactor To Study Osteogenesis In Bone Explants, Alexis Victoria Graham

Theses and Dissertations

The current gold standard treatment for bone defects is autologous cancellous bone graft, which involves increased surgery time and donor site morbidity, and limited supply of bone and cells for regeneration. Bioreactors may aid in the generation of mechanically conditioned bone grafts with more cells compared to traditional grafts. However, the specific parameters of fluid flow and mechanical loading which contribute to osteogenesis and cell viability in bioreactors are not fully characterized. Here, a perfusion-compression bioreactor system was developed to study osteogenesis in porcine trabecular bone explants. Loading accuracy was over 88% across six bioreactors at a 0.1 s-1 strain …

Dynamic Segmental Kinematics Of The Lumbar Spine During Diagnostic Movements, Paul Mcmullin

Theses and Dissertations

While lumbar kinematics can be measured in vivo, most measurements are invasive (such as percutaneous bone pins), provide high doses of radiation (such as biplane fluoroscopy), or are taken with the patient in a static position (such as MRIs). Recent work suggests that lumbar kinematics can be determined by dynamic measurements of epidermal strain in the lower back. This work aims to develop and examine a method of examining lumbar kinematics via optoelectronic motion capture utilizing skin-mounted markers in the lumbar region. Two studies were performed. One study examined lumbar epidermal strain in 28 asymptomatic subjects during diagnostic movements, while …

On B-Anti-Open Sets: A Formal Definition, Proofs, And Examples, Sudeep Dey, Priyanka Paul, Gautam Chandra Ray

Neutrosophic Systems with Applications

The concepts of open sets, closed sets, the interior of a set, and the exterior of a set are the most basic concepts in the study of topological spaces in any setting. When we turn our attention to the concept of anti-topological spaces, we encounter analogous fundamental concepts, such as the definition of anti-open sets, anti-closed sets, anti-interior, anti-exterior, etc. These concepts have already been introduced and studied by mathematicians worldwide. In this article, we introduce and study the concepts of b-anti-open set, b-anti-closed set, anti-b-interior, and anti-b-closure in the context of anti-topological spaces and investigate some of their basic …

Investigation And Control Of Görtler Vortices In High-Speed Flows, Omar Es-Sahli

Theses and Dissertations

High-amplitude freestream turbulence and surface roughness elements can excite a laminar boundary-layer flow sufficiently enough to cause streamwise-oriented vortices to develop. These vortices resemble elongated streaks having alternate spanwise variations of the streamwise velocity. Following the transient growth phase, the fully developed vortex structures downstream undergo an inviscid secondary instability mechanism and, ultimately, transition to turbulence. This mechanism becomes much more complicated in high-speed boundary layer flows due to compressibility and thermal effects, which become more significant for higher Mach numbers. In this research, we formulate and test an optimal control algorithm to suppress the growth rate of the aforementioned …

Influence Of Periodic Stitching On The In-Plane And Out-Of-Plane Mechanical Properties Of Polymer Composites, Radwa Alaziz

Theses and Dissertations

The purpose of this research is to investigate the influence of stitching architectures by using different stitching periodic patterns on the in-plane and out-of-plane mechanical properties. By using the inherent periodic architecture of these composites, their mechanical properties may be tailored for specific applications. Composite structures are extensively used in several industries such as aerospace, automotive, sports, and construction due to their many advantages, which include tailorable mechanical properties, high strength-to-weight ratios, and high specific stiffness. However, due to their low interlaminar tensile strength, composites are prone to delaminations, which can degrade the overall mechanical performance of the structure. Through-thickness …

Adaptive Traction, Power And Torque Control Strategies And Optimization In An All-Electric Powertrain, Aymane Hidara

Theses and Dissertations

Electric and hybrid-electric vehicles lean heavily on intricate control algorithms to provide smooth, reliable, and secure operations under any driving conditions. Three distinct supervisory control strategies have been developed, each aiming to improve reliability and vehicle performance of a dual-motor electric vehicle equipped with an all-wheel-drive, fully electric powertrain. These algorithms are adept at dynamically modulating and constraining the torque provided to the wheels, leveraging two autonomous permanent magnet electric drive units. This study utilizes a vehicle model jointly provided by MathWorks and General Motors in partnership with industry sponsors. The these strategies were implemented in the model and enhanced …

Safety-Aware Autonomous Robot Navigation, Mapping And Control By Optimization Techniques, Tingjun Lei

Theses and Dissertations

The realm of autonomous robotics has seen impressive advancements in recent years, with robots taking on essential roles in various sectors, including disaster response, environmental monitoring, agriculture, and healthcare. As these highly intelligent machines continue to integrate into our daily lives, the pressing imperative is to elevate and refine their performance, enabling them to adeptly manage complex tasks with remarkable efficiency, adaptability, and keen decision-making abilities, all while prioritizing safety-aware navigation, mapping, and control systems. Ensuring the safety-awareness of these robotic systems is of paramount importance in their development and deployment. In this research, bio-inspired neural networks, nature-inspired intelligence, deep …

Neural Networks For Improved Signal Source Enumeration And Localization With Unsteered Antenna Arrays, John T. Rogers Ii

Theses and Dissertations

Direction of Arrival estimation using unsteered antenna arrays, unlike mechanically scanned or phased arrays, requires complex algorithms which perform poorly with small aperture arrays or without a large number of observations, or snapshots. In general, these algorithms compute a sample covriance matrix to obtain the direction of arrival and some require a prior estimate of the number of signal sources. Herein, artificial neural network architectures are proposed which demonstrate improved estimation of the number of signal sources, the true signal covariance matrix, and the direction of arrival. The proposed number of source estimation network demonstrates robust performance in the case …

Flood Inundation Mapping Of The Catalpa Creek Watershed, Subodh Poudel

Theses and Dissertations

This study addresses flood risk assessment in the Catalpa Creek watershed, located in northeast Mississippi, USA. Employing the Hydrological Modeling System (HEC-HMS) and the River Analysis System (HEC-RAS), integrated models were developed and calibrated, to predict flood behavior within the watershed. The study conducted flood frequency analyses for return periods ranging from 2 to 100 years and generated flood inundation maps, pinpointing flood-prone areas. Mitigation measures for flood risk management were recommended. The results underscore the effectiveness of the integrated modeling approach for simulating and understanding the complex dynamics of flood events. The research identified critical flood-prone zones, emphasizing the …

Visual Acquisition And Detection Of Manned Fixed-Wing Aircraft And Rotorcraft: An Analysis Of Pilots' Perception And Performance, Rania Bassou

Theses and Dissertations

In recent years, the rapid advancement of Unmanned Aircraft Systems (UAS) has led to an increasingly complex National Airspace System (NAS), necessitating a comprehensive understanding of factors that impact pilot visual acquisition and detection of other aircraft (including manned fixed-wing, rotorcraft, and UAS). The objective of this study is to investigate factors that affect pilot performance in visually acquiring and detecting other manned-fixed wing aircraft and manned rotorcraft using a multi-method approach, incorporating qualitative and quantitative data analysis. A diverse sample of pilots with varying flight experience participated in the study. Participants were exposed to a series of flight test …

Stream Water Quality Under Baseflow Conditions In A Livestock Production Area, Maryi Lorena Chavarro Chaux

Theses and Dissertations

This study evaluates the spatial and temporal impacts of implemented Best Management Practices (BMP) on stream water quality under baseflow conditions in a stream segment affected by livestock production. The BMPs includes 10-m fenced riparian zone and crossing paths along the reach segment. Grab water samples and water quality monitoring were collected biweekly from July 2019 to March 2022. Water quality parameters included temperature, dissolved oxygen, electric conductance, total dissolved solids, turbidity, and pH. Water samples were lab analyzed for sediments and nutrients. Results evidenced poor water quality before BMPs implementation, with nutrient concentrations exceeding the nation's and state's criteria. …

Assessing The Relationship Between Soil Health/Quality And Water Quality In The Mississippi Delta, Laura Andrea Sarmiento Rodriguez

Theses and Dissertations

Several studies have reported agronomic benefits by improving soil health/quality, but uncertain knowledge remains when determining specific impacts on water quality off-field. This study investigated the links between runoff water quality and soil health/quality in agricultural fields of the Mississippi delta under three land management scenarios: Conservation Reserve Program (CRP), vegetative buffer (VB), and row crops (RC). Using the Soil Management Assessment Framework (SMAF), a Soil Quality Index (SQI) was obtained based on ten soil health/quality indicators from 2008 and 2012 datasets. The SMAF identified significant differences in soil health/quality improvements among scenarios over a four-year period. Varied relationships between …

Mechanical Characterization Of Functionally Graded M300 Maraging Steel Cellular Structures, Bradley Jay Sampson

Theses and Dissertations

Traditional methods for increasing the energy absorption of a structure involve using a stronger material or increasing the volume of the structure, resulting in a higher cost or additional weight. Additive manufacturing (AM) can be used to maximize the energy absorption of materials with the ability to create complex geometries such as cellular structures. Previous work has shown that the energy absorption of additively manufactured parts can be improved through functionally graded cellular structures; however, this strategy has not been applied to ultra-high strength steel materials. This work characterizes the effect of multiple functional-grading strategies (e.g. uniform, rod-graded, size-graded) on …

An Investigation Into Applications Of Canonical Polyadic Decomposition & Ensemble Learning In Forecasting Thermal Data Streams In Direct Laser Deposition Processes, Jonathan Storey

Theses and Dissertations

Additive manufacturing (AM) is a process of creating objects from 3D model data by adding layers of material. AM technologies present several advantages compared to traditional manufacturing technologies, such as producing less material waste and being capable of producing parts with greater geometric complexity. However, deficiencies in the printing process due to high process uncertainty can affect the microstructural properties of a fabricated part leading to defects. In metal AM, previous studies have linked defects in parts with melt pool temperature fluctuations, with the size of the melt pool and the scan pattern being key factors associated with part defects. …

Electroencephalography And Biomechanics Of The Basketball Throw, Phong Ky Phan

Theses and Dissertations

According to various studies, compared with novice athletes, experts exhibit superior integration of perceptual, cognitive, and motor skills. This superior ability has been associated with the focused and efficient organization of task-related neural networks. Specifically, skilled individuals demonstrate a spatially localized or relatively lower response in brain activity, characterized as ‘neural efficiency’, when performing within their domain of expertise. Previous works also suggested that elite basketball players can predict successful free throws more rapidly and accurately based on cues from body kinematics. These traits are the result of a prolonged training of specific motor skills and focused excitability of the …

Study Of Surface And Groundwater Quality And Quantity At Watershed Scale In Mississippi, Dipesh Nepal

Theses and Dissertations

Hydrology and water quality are affected by land use and climate changes. Mississippi’s diverse agro–ecosystem comprises of a range of land use land cover (LULC) including agriculture, forest, wetlands, urban, and grasslands. The objectives of this study were to investigate the impacts of various factors such as Best Management Practices (BMPs), wetlands, LULC, and climate changes on water quality and quantity. The hydrologic and water quality responses to dynamic LULC input in Soil and Water Assessment Tool (SWAT) were evaluated. Results showed that agricultural and forest expansion were major drivers of hydrologic and water quality changes in Big Sunflower River …

Network Layer Reliability And Security In Energy Harvesting Wireless Sensor Networks, Jing Yang

Theses and Dissertations

Wireless sensor networks (WSNs) have become pivotal in precision agriculture, environmental monitoring, and smart healthcare applications. However, the challenges of energy consumption and security, particularly concerning the reliance on large battery-operated nodes, pose significant hurdles for these networks. Energy-harvesting wireless sensor networks (EH-WSNs) emerged as a solution, enabling nodes to replenish energy from the environment remotely. Yet, the transition to EH-WSNs brought forth new obstacles in ensuring reliable and secure data transmission.

In our initial study, we tackled the intermittent connectivity issue prevalent in EH-WSNs due to the dynamic behavior of energy harvesting nodes. Rapid shifts between ON and OFF …

Moisture Effects On Visible Near-Infrared And Mid-Infrared Soil Spectra And Strategies To Mitigate The Impact For Predictive Modeling, Francis Hettige Chamika Anuradha Silva

Theses and Dissertations

Instrumental disparities and soil moisture are two of the key limitations in implementing spectroscopic techniques in the field. This study sought to address these challenges through two objectives. The first objective was to assess Visible-near infrared (VisNIR) and mid-infrared (MIR) spectroscopic approaches and explore the feasibility of transferring calibration models between laboratory and portable spectrometers. The second objective addressed the challenge of soil moisture and its impact on spectra. The portable spectrometers demonstrated comparable performance to their laboratory-based counterparts in both regions. Spiking with extra-weight, was the most effective calibration transfer method eliminating disparities between instruments. The samples were rewetted …

Cement Stabilization Of Poorly Graded Sand, Lana Grayson Brown Sisung

Theses and Dissertations

Stabilization of poorly graded sand in full-scale applications is challenging. This thesis evaluated cement-stabilized sand and had two objectives: (1) evaluation of stabilized material using the PM device to quantify engineering properties for future comparison to alterative materials and to investigate the effectiveness of the device with sand and (2) investigation of the merits of alternative application of cement to sand to benchmark against other topically applied materials. The PM device was successfully used to recommend 10% cement for field studies with one sand, successfully allowed data collection in laboratory and field applications, and its potential in sand seems promising …