Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 22861 - 22890 of 196373

Full-Text Articles in Engineering

Recent Advances In Synthesis And Bio-Applications Of Natural Stabilizers For Metal Nanoparticles, Abhishek Sharma, Navneet Kaur, Ayashkanta Nanda, Manvinder Kaur, Rajeev Sharma, Harvinder Singh Sohal Jan 2024

Recent Advances In Synthesis And Bio-Applications Of Natural Stabilizers For Metal Nanoparticles, Abhishek Sharma, Navneet Kaur, Ayashkanta Nanda, Manvinder Kaur, Rajeev Sharma, Harvinder Singh Sohal

Journal of Metals, Materials and Minerals

Due to their exceptional physicochemical properties, the synthesis and application of metal nano-particles gained significant traction and a grip in industries and scientific fields or regions. However, the thermodynamic instability of metal nanoparticles poses or leads to challenges in their controlled synthesis and stabilization. To address this stability and the immobilization strategies, natural polymers such as cellulose, starch, alginate, chitosan, and hyaluronic acid have been explored for their non-toxic, biodegradable, and environmentally friendly characteristics. Recent advances in nanotechnology have led to an increased focus on these natural polymer’s utilization as effective stabilizers for diverse metal nanoparticles. This review comprehensively examines …

Go to article

Influence Of Bi Substitution On Structural And Optical Properties Of Lafeo3 Perovskite, Mohammed Sadok Mahboub, Ouarda Ben Ali, Soria Zeroual, Ghani Rihia, Mourad Mimouni, Imad Hamadneh, Samir Bayou, Hani Boulahbel, Adel Benarfa, Ferhat Rehouma Jan 2024

Influence Of Bi Substitution On Structural And Optical Properties Of Lafeo3 Perovskite, Mohammed Sadok Mahboub, Ouarda Ben Ali, Soria Zeroual, Ghani Rihia, Mourad Mimouni, Imad Hamadneh, Samir Bayou, Hani Boulahbel, Adel Benarfa, Ferhat Rehouma

Journal of Metals, Materials and Minerals

The sol-gel self-ignition method has successfully synthesized a series of homogenous perovskites La1-xBixFeO3 (x=0.0, 0.2, 0.4, 0.6, and 0.8) nanoparticles. Rietveld refinement results from XRD patterns revealed no secondary phases in pure and Bi-substituted LaFeO3 samples. The structural transition from orthorhombic at x = 0.0 until x=0.6 (space group Pbnm) to rhombohedral at x=0.8 (space group R3c) was observed. Lattice parameter values increase slightly with Bi concentration due to the substitution of Bi in the LaFeO3 structure. The average crystallite size D was found to vary between 19 nm and 50 nm. The combination of XRD and SEM demonstrated that …

Go to article

Nanostructure Of Tio2 And Wo3 Multilayer Films Deposited On Ito Glass For Electrochromic Enhanced Photocatalytic Activity, Atsakorn Chuenkruit, Watcharaporn Thongjoon, Kamon Aiempanakit, Montri Aiempanakit, Chantana Aiempanakit Jan 2024

Nanostructure Of Tio2 And Wo3 Multilayer Films Deposited On Ito Glass For Electrochromic Enhanced Photocatalytic Activity, Atsakorn Chuenkruit, Watcharaporn Thongjoon, Kamon Aiempanakit, Montri Aiempanakit, Chantana Aiempanakit

Journal of Metals, Materials and Minerals

The photocatalytic activity (PA) by electrochromic (EC) enhancement of single and multilayer films of TiO2, WO3, TiO2/WO3, and WO3/TiO2 was investigated. All films were deposited from metal on an ITO glass substrate using direct current (DC) magnetron sputtering via an oblique angle deposition (OAD) technique at 85°. Subsequently, a thermal oxidation (TO) process at 500℃ was applied for the samples to form metal oxide films. The morphology, elemental composition, crystal structure, and optical properties were studied by using field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffractometry (XRD), and UV-vis spectroscopy, respectively. The photocatalytic properties were investigated …

Go to article

Surface Characteristics Evolution Of 316l Stainless Steel Induced By Tension Loading, Kanokwan Antanam, Surasak Kuimalee, Panya Buahombura, Waraporn Piyawit Jan 2024

Surface Characteristics Evolution Of 316l Stainless Steel Induced By Tension Loading, Kanokwan Antanam, Surasak Kuimalee, Panya Buahombura, Waraporn Piyawit

Journal of Metals, Materials and Minerals

316L stainless steel has been employed as a medical implant material owing to its advantageous biocompatibility and durability. The microstructure and surface characteristics of 316L play a crucial role in implant application. Diverse processing methods were utilized to modify the surface properties of 316L to customize the characteristics of medical devices. Mechanical deformation induces changes in the microstructure and causes changes in surface topography. In this study, we introduced deformation to 316L by applying uniaxial tension at strain values ranging from 2% to 25%. During sample preparation, electrochemical polishing was employed to eliminate the deformed layers generated by mechanical grinding. …

Go to article

Tin, Silver, And Copper Sulfate Compound Extraction From Lead-Free Solder Dross By Reduction With Petroleum Coke, Electrorefining, Cementation, And Crystallization Process, Sakhob Khumkoa, Natthicha Ma-Ud, Tapany Patcharawit, Tanongsak Yingnakorn Jan 2024

Tin, Silver, And Copper Sulfate Compound Extraction From Lead-Free Solder Dross By Reduction With Petroleum Coke, Electrorefining, Cementation, And Crystallization Process, Sakhob Khumkoa, Natthicha Ma-Ud, Tapany Patcharawit, Tanongsak Yingnakorn

Journal of Metals, Materials and Minerals

Solder dross, a waste by-product from the electronic component dipping bath, contains significant quantities of valuable metals. This study presents a four-step process for recovering tin, silver, and copper from lead-free Sn-Ag-Cu solder dross. The process involves the initial reduction of the dross using petroleum coke to produce an anode plate, followed by electrorefining to extract tin from the anode plate. Selective leaching of silver and copper from the residual anode slime and cementation techniques are employed to recover silver powder. The rest of the copper solution was used to synthesize copper sulfate crystals. Experimental results demonstrate optimal conditions for …

Go to article

Sbr Elastomer Response To Renewable Diesel Blends: An Experimental Investigation, Andrias Rahman Wimada, Ni Putu Dian Nitamiwati, Fatimah Tresna Pratiwi, Maharanni Dewi Solikhah, Bina Restituta Barus, Eki Dwi Wijanarko, Riesta Anggarani, Lies Asiyah, Setyo Widodo, Arfi Thahar, Soni Solistia Wirawan Jan 2024

Sbr Elastomer Response To Renewable Diesel Blends: An Experimental Investigation, Andrias Rahman Wimada, Ni Putu Dian Nitamiwati, Fatimah Tresna Pratiwi, Maharanni Dewi Solikhah, Bina Restituta Barus, Eki Dwi Wijanarko, Riesta Anggarani, Lies Asiyah, Setyo Widodo, Arfi Thahar, Soni Solistia Wirawan

Journal of Metals, Materials and Minerals

To investigate the impact of Styrene Butadiene Rubber (SBR) exposure to renewable fuels during handling and storage processes, compatibility tests were conducted on three different renewable fuel mixtures: 30% biodiesel, 40% biodiesel, and 30% biodiesel + 10% hydrogenated vegetable oil. These tests involved static immersion experiments conducted at room temperature for a duration of 1000 h, following the ASTM D471 standards. Before and after the immersion tests, the physical properties and visually assessed elastomers concentrations were investigated by varying the SBR content. Additionally, the post-immersion fuel properties were examined. The results showed that mass and volume swelling increased with the …

Go to article

Optimization Of Ultrasound-Assisted Anthocyanin Extraction From Agricultural Waste Purple Corn Silk For Multifunctional Hemp Finishes, Benjamas Klaykruayat, Nattaya Vuthiganond, Pisutsaran Chitichotpanya Jan 2024

Optimization Of Ultrasound-Assisted Anthocyanin Extraction From Agricultural Waste Purple Corn Silk For Multifunctional Hemp Finishes, Benjamas Klaykruayat, Nattaya Vuthiganond, Pisutsaran Chitichotpanya

Journal of Metals, Materials and Minerals

The utilization of agricultural wastes for textile dyeing has gained popularity due to their safe and environmentally friendly properties, as well as the resource sustainability. Natural dye extraction is usually achieved through solvent extraction, which is time-consuming, requires a lot of solvent, and degrades desired compounds at high temperatures. Thus, this study investigated ultrasound-assisted anthocyanin extraction from agricultural waste purple corn silk as natural functional colorants for hemp finishes, given the numerous health benefits associated with anthocyanin. In order to optimize the extraction processes and evaluate the synergistic impact of these conditions, response surface methodology was implemented. The optimum conditions …

Go to article

Bifunctional Cationic Modification Of Modal Fabric For Sustainable In Textile Dyeing With Spent Coffee Grounds, Monthon Nakpathom, Rattanaphol Mongkholrattanasit, Sarute Ummartyotin, Pisutsaran Chitichotpanya, Nattaya Vuthiganond Jan 2024

Bifunctional Cationic Modification Of Modal Fabric For Sustainable In Textile Dyeing With Spent Coffee Grounds, Monthon Nakpathom, Rattanaphol Mongkholrattanasit, Sarute Ummartyotin, Pisutsaran Chitichotpanya, Nattaya Vuthiganond

Journal of Metals, Materials and Minerals

In order to dye cellulose or regenerated cellulose with natural dyes, toxic metal mordants are generally employed. In response to this issue, the novel bifunctional cationic agent was pretreated to modify modal (regenerated cellulose) fabric prior to dyeing to enhance the fiber-dye affinity. The cationization reaction was carried out using a compound containing bicationic sites, N,N'-(oxybis (ethane-2,1-diyl))bis(3-chloro-2-hydroxy-N,N-dimethylpropan-1-aminium. This unique cationic agent is capable of producing nonvolatile amine and has no odor problem. The successful cationic modification was confirmed through FTIR spectroscopy and zeta potential measurement. The cationized process was optimized at a cationic and sodium hydroxide concentration …

Go to article

Designing Biphasic Nanocellulose Hydrogels To Mimic The Complex Cartilage-Bone Interface, Sairash Sairash, Sirinee Jirajessada, Supansa Yodmuang Jan 2024

Designing Biphasic Nanocellulose Hydrogels To Mimic The Complex Cartilage-Bone Interface, Sairash Sairash, Sirinee Jirajessada, Supansa Yodmuang

Journal of Metals, Materials and Minerals

Osteochondral lesions, which affect both the cartilage and the bone, present significant challenges in treatment due to the complex mechanical and biochemical properties of these tissues. A crucial consideration in developing tissue replacements for these lesions is the simultaneous regeneration of cartilage and calcified cartilage, which forms the transition zone to bone. Our current study aims to fabricate a bilayer polymeric hydrogel designed not only to support cartilage regeneration but also to serve as an interface between cartilage and bone. The bilayer hydrogel was created by combining oxidized bacterial nanocellulose, gelatin, and alginate in one layer, while the other layer …

Go to article

The Impact Of Hot Rolling, Zn And Sn On The Mechanical And Corrosion Characteristics Of Mg-Zn-Ca Alloys, Halil Eren, Ali Güngör, Erkan Koç, Harun Çuğ Jan 2024

The Impact Of Hot Rolling, Zn And Sn On The Mechanical And Corrosion Characteristics Of Mg-Zn-Ca Alloys, Halil Eren, Ali Güngör, Erkan Koç, Harun Çuğ

Journal of Metals, Materials and Minerals

In this study, it was aimed to develop a biodegradable metallic plate that is an alternative to bioinert metal plates. The main advantage of using biodegradable materials for implants is that they can be gradually replaced with the patient's own tissue, which reduces the need for additional surgeries to remove the implant after it has served its purpose. Magnesium and its alloys can provide biocompatibility as orthopedic implant materials. Mg-Zn-Ca and Mg-Zn-Ca-Sn alloys were prepared using the gravity die casting method. Zn (1.0 wt% and 2.0 wt%) and Sn (0.0 wt%, 0.5 wt% and 1.0 wt%) ratios were used as …

Go to article

Controlling Titanium Incorporation In Hydrogenated Amorphous Carbon Films Via Closed-Loop Feedback In Reactive High Power Impulse Magnetron Sputtering, Pornthip Ratchayotee, Artit Chingsungnoen, Phitsanu Poolcharuansin Jan 2024

Controlling Titanium Incorporation In Hydrogenated Amorphous Carbon Films Via Closed-Loop Feedback In Reactive High Power Impulse Magnetron Sputtering, Pornthip Ratchayotee, Artit Chingsungnoen, Phitsanu Poolcharuansin

Journal of Metals, Materials and Minerals

A closed-loop feedback approach has been developed to control titanium incorporation in hydrogenated amorphous carbon (a-C:H) films during reactive high-power impulse magnetron sputtering (R-HiPIMS). The average discharge current measured at the magnetron target is used as the primary feedback signal to regulate the target coverage state. Hence, the titanium concentration in the films can be controlled. Significant changes were observed in the film microstructure and properties as the target state evolved with increasing target coverage. This causes the film transition from metallic titanium to a-C:H films with decreasing titanium concentration. For example, the XRD and Raman analyses indicated a microstructural …

Go to article

Nutrient Retention And Availability Of Biochars Prepared By Co-Pyrolysis Of Vinasse With Sugarcane Filter Cake, Siraprapra Suwanree, Jesper T.N. Knijnenburg, Emirhan M. Ölҫer, Kaewta Jetsrisuparb Jan 2024

Nutrient Retention And Availability Of Biochars Prepared By Co-Pyrolysis Of Vinasse With Sugarcane Filter Cake, Siraprapra Suwanree, Jesper T.N. Knijnenburg, Emirhan M. Ölҫer, Kaewta Jetsrisuparb

Journal of Metals, Materials and Minerals

The disposal of vinasse, a nutrient-rich by-product of ethanol production, is challenging because of the low pH and emissions of harmful gases and smells. Here, biochars were produced by pyrolysis of mixtures of filter cake and vinasse (0.25 w/v to 1 w/v) at 550℃. The effects of filter cake to vinasse ratios on the biochar yield, pH, ash content, total nutrient (P, K, Ca, and Mg) content, and nutrient availability were investigated. Increasing the filter cake to vinasse ratio increased the biochar yield and ash content and lowered the biochar pH from 10.3 for 0.25-BC to 8.2 for filter cake …

Go to article

In-Situ Embedding Of Nanocylindrical Bi25feo40 Into Scaffold-C3n4 For Enhanced Z-Scheme Photocatalytic Degradation, Yile Wang, Yuhui Ma, Liang Chu, Xing'ao Li Jan 2024

In-Situ Embedding Of Nanocylindrical Bi25feo40 Into Scaffold-C3n4 For Enhanced Z-Scheme Photocatalytic Degradation, Yile Wang, Yuhui Ma, Liang Chu, Xing'ao Li

Journal of Metals, Materials and Minerals

The development of Z-scheme heterojunctions has emerged as an effective approach for boosting the photocatalytic activity. Herein, we fabricated of a direct Z-scheme heterojunction between scaffold-like C3N4 and nanocylindrical Bi25FeO40, which exhibits enhanced photocatalytic activity and dye adsorption capacity. The in-situ embedding of Bi25FeO40 within scaffold C3N4 promotes photogenerated carrier separation, leading to an optimized degradation rate of 0.0205 min−1 and a contaminant removal efficiency of 85.3%. This work paves a new path for the development of high-efficiency photocatalytic degradation.

Go to article

Investigated The Ion Energy And The Microstructure Properties Of Tetrahedral Amorphous Carbon Film Produced By Pulsed Filtered Cathodic Vacuum Arc Combined With Plasma Biasing Technique, Nopphon Saowiang, Phitsanu Poolcharuansin, Artit Chingsungnoen, Nitisak Pasaja Jan 2024

Investigated The Ion Energy And The Microstructure Properties Of Tetrahedral Amorphous Carbon Film Produced By Pulsed Filtered Cathodic Vacuum Arc Combined With Plasma Biasing Technique, Nopphon Saowiang, Phitsanu Poolcharuansin, Artit Chingsungnoen, Nitisak Pasaja

Journal of Metals, Materials and Minerals

The purpose of this work is to demonstrate that operations using the plasma biasing technique in pulsed filtered cathodic vacuum arc (PFCVA) enable an energy-enhanced in deposition process for the high quality of tetrahedral amorphous carbon (ta-C) thin films (high sp3 content, denser, and very low surface roughness). The effect of anode bias potential on the energy distribution function of C+ ions, including the topography, microstructure, chemical state, and density of ta-C films, was systematically investigated. It was found that the plasma biasing technique can increase the average energy of C+ ions, but nevertheless, the ion …

Go to article

Single Electrode Mode Triboelectric Nanogenerator For Recognition Of Animal Sounds, Archana Panda, Kunal Kumar Das, Kushal Ruthvik Kaja, Mohamed Belal, Basanta Kumar Panigrahi Jan 2024

Single Electrode Mode Triboelectric Nanogenerator For Recognition Of Animal Sounds, Archana Panda, Kunal Kumar Das, Kushal Ruthvik Kaja, Mohamed Belal, Basanta Kumar Panigrahi

Journal of Metals, Materials and Minerals

This research presents an innovative and sustainable solution by designing triboelectric nanogenerators (TENGs) for energy harvesting. The fabrication process of TENGs includes PDMS and aluminum. The two single electrode mode TENG was designed one is plain PDMS/Al and the other is porous PDMS/Al TENG devices. The porous PDMS/Al TENG device generated a voltage and current of 7 V and 5 nA for 2 cm ´ 2 cm device area. Moreover, the TENG system was employed to successfully charge capacitors, and recognize various animal sounds. This study underscores the promising potential of harvesting energy from body movements and powering of devices, …

Go to article

Photoluminescent Carbon Nanodots For Artificial Photosynthesis, Rajie A. Medina, Michael E. Franco, Lyn Marie De Juan-Corpuz, Ryan D. Corpuz Jan 2024

Photoluminescent Carbon Nanodots For Artificial Photosynthesis, Rajie A. Medina, Michael E. Franco, Lyn Marie De Juan-Corpuz, Ryan D. Corpuz

Journal of Metals, Materials and Minerals

The emerging field of carbon dots (CDs), a type of carbon nanostructure that has gained significant attention due to its unique properties and potential applications. CDs possess remarkable attributes, including photoluminescence, electrochemical potential, compatibility with living organisms, solubility in water, chemical stability, and versatile surface properties. The chemical structure, particle size, and surface functionalities of CDs all have an impact on their photoluminescent properties, which are the focus of this review. The photoluminescence mechanism in CDs is discussed, highlighting their amorphous structure, and comparing them to graphene quantum dots. The paper delves into the application of CDs in artificial photosynthesis, …

Go to article

Hot Corrosion Behavior Of Mg2 Sio4 Ceramic Exposed To Molten Na2so4 At 900℃ To 1100℃, Hamza Milles, Louafi Snani, Amel Oulabbas, Khaled Toualbia Jan 2024

Hot Corrosion Behavior Of Mg2 Sio4 Ceramic Exposed To Molten Na2so4 At 900℃ To 1100℃, Hamza Milles, Louafi Snani, Amel Oulabbas, Khaled Toualbia

Journal of Metals, Materials and Minerals

Thermal barriers are used as protective coating for critical components working at high temperature of gas turbines. Forsterite (Mg2SiO4) ceramic is proposed by researchers as a novel thermal barrier coating (TBC), due to its low thermal conductivity and good thermal expansion. Hot corrosion results from the molten salts effect on the TBC’s surface, accumulated during the combustion processes. In this study, Mg2SiO4 samples were exposed to Na2SO4 molten salt at 900℃, 1000℃ and 1100℃ for 6 h in air. Samples were investigated and compared using scanning electron microscope (SEM) and X-Ray diffractometer (XRD). MgSO4 was the predominant corrosion product observed …

Go to article

A Contribution To The Exploration Of The Chemical Durability, Thermal Stability, And Structural Ability Of Glasses From The Fe2o3-K2o-Moo3-P2o5 Quaternary System, Asmae Er-Rafai, Yasmina Alaoui, Mohamed Laourayed, Mohamed Ounacer, Mouloud El Moudane, Mohammed Sajieddine, Abdelkbir Bellaouchou Jan 2024

A Contribution To The Exploration Of The Chemical Durability, Thermal Stability, And Structural Ability Of Glasses From The Fe2o3-K2o-Moo3-P2o5 Quaternary System, Asmae Er-Rafai, Yasmina Alaoui, Mohamed Laourayed, Mohamed Ounacer, Mouloud El Moudane, Mohammed Sajieddine, Abdelkbir Bellaouchou

Journal of Metals, Materials and Minerals

The relationships between the properties and structure of xFe2O3-(40-x)K2O-10MoO3-50P2O5 glasses have been reported in this paper. Homogeneous glasses are formed for different Fe2O3 contents. The density and molar volume evolution of these glasses shows that Fe2O3 acts as a glass former and strengthens the structural bonds of the glass. Experimental 57Fe Mössbauer spectroscopy graphs suggest the existence of divalent Iron (FeII) and trivalent Iron (FeIII). The boost in chemical durability agrees with the growth in glass transition temperature due to more powerful bonding in the structural network. P-O-Fe bonds replace P-O-P bonds when Fe2O3 is present in the phosphate network.

Go to article

Composition-Driven Phase Coexistence And Functional Properties Of The (1-X)Bzt-(X)Bct Ceramics Near The Phase Convergence Region, Jirapa Tangsritrakul, Chumpon Wichittanakom, Chatree Saiyasombat Jan 2024

Composition-Driven Phase Coexistence And Functional Properties Of The (1-X)Bzt-(X)Bct Ceramics Near The Phase Convergence Region, Jirapa Tangsritrakul, Chumpon Wichittanakom, Chatree Saiyasombat

Journal of Metals, Materials and Minerals

The concept of composition-induced phase transformation in Lead Zirconate Titanate (PZT) at the Morphotropic Phase Boundary (MPB) has been employed to improve functional properties of the (1-x)BZT-(x)BCT ceramic. However, it was observed that the phase diagram of the (1-x)BZT-(x)BCT ceramic is different to the PZT. As a result, the nature of the superior functional properties found in (1-x)BZT-(x)BCT ceramic is unlike PZT and still unclear so far. In this work, functional properties; dielectric, ferroelectric, energy storage, and piezoelectric properties, of the (1-x)BZT-(x)BCT ceramics where x = 0.3 mol% to 0.6 mol% were evaluated at room temperature in comparison to the …

Go to article

Incorporating Novel Bio-Mineral Materials Of Silicone-Arrowroot Modified Starch For Compressed Powder, Pirada Sudprasert, Ananthaya Sansawat, Piangkhwan Kruapoo Jan 2024

Incorporating Novel Bio-Mineral Materials Of Silicone-Arrowroot Modified Starch For Compressed Powder, Pirada Sudprasert, Ananthaya Sansawat, Piangkhwan Kruapoo

Journal of Metals, Materials and Minerals

Incorporating novel bio-mineral materials of silicone-arrowroot modified starch (SA) is an environmentally friendly technique to create compressed powder, thereby integrating biodiversity with sustainability and responding to the Bio-Circular-Green (BCG) economy. The SA had improved flowability and water resistance compared with non-modified arrowroot flour (A0), concurring with the Fourier Transform Infrared (FTIR), scanning electron microscope (SEM) analyses that indicated more hydrophobic properties. To investigate the formulated dust and compressed powder, three types of binders including magnesium stearate (Ms), isopropyl myristate (Im), and mineral oil (Mo) were examined. Powder samples of all binders at each concentration gave high water resistance with floating …

Go to article

Lldpe Film Development Surface With Nucleating Agents To Reduce Fat Stains From Food Adherence On The Film Surface For Easy Rinsing Before Recycling, Nattapong Pinpru, Chiranicha Ninthap, Supang Sripraphot, Supharada Khaisaat Jan 2024

Lldpe Film Development Surface With Nucleating Agents To Reduce Fat Stains From Food Adherence On The Film Surface For Easy Rinsing Before Recycling, Nattapong Pinpru, Chiranicha Ninthap, Supang Sripraphot, Supharada Khaisaat

Journal of Metals, Materials and Minerals

The purpose of this research was to enhance the surface of linear low-density polyethylene (LLDPE) film by using single and hybrid nucleating agents to reduce fat stains from food adherence on the film surface for easy rinsing before recycling, consequently reducing energy consumption before recycling. The process begins with the preparation of a high-concentration masterbatch of LLDPE with nucleating agents and polyethylene glycol (PEG), followed by blown film and test analysis. The results showed that both single and hybrid nucleating agents resulted in substantial modifications in the surface characteristics of the film. The altered surface texture of the film makes …

Go to article

The Effects Of Copper On The Mechanical Properties Of Ti-10mo Alloy Prepared By Powder Metallurgy Method, Aji Abdillah Kharisma, Haris Rudianto, Achmad Benny Mutiara, Sulistyo Puspitodjati, Fahamsyah Hamdan Latief, Agus Sukarto Wismogroho, Wahyu Bambang Widayatno, Didik Aryanto, Cherly Firdharini Jan 2024

The Effects Of Copper On The Mechanical Properties Of Ti-10mo Alloy Prepared By Powder Metallurgy Method, Aji Abdillah Kharisma, Haris Rudianto, Achmad Benny Mutiara, Sulistyo Puspitodjati, Fahamsyah Hamdan Latief, Agus Sukarto Wismogroho, Wahyu Bambang Widayatno, Didik Aryanto, Cherly Firdharini

Journal of Metals, Materials and Minerals

Titanium alloys are currently widely explored and produced for applications in various engineering fields. Alloying metal elements such as Mo, Cu, and Mn bring more advantages among them to help improve the mechanical properties of titanium alloys. This study is intended for the evaluation of mechanical properties through compression and hardness testing performed on a Ti-10Mo alloy with copper addition by powder metallurgy. Ti-10Mo alloys with the addition of copper contents of 3 wt% Cu, 6 wt% Cu, and 9 wt% Cu were prepared to optimize the properties of Ti-10Mo-xCu alloys. With the addition of 3 wt% copper, the compressive …

Go to article

Fast Microwave Synthesis Of High-Silica Natural Soil Based Porous Geopolymer, Naritsara Toobpeng, Sirithan Jiemsirilers Jan 2024

Fast Microwave Synthesis Of High-Silica Natural Soil Based Porous Geopolymer, Naritsara Toobpeng, Sirithan Jiemsirilers

Journal of Metals, Materials and Minerals

This study describes a simple microwave process for fabricating porous geopolymer-polymer based Shirasu soil. The porous geopolymer samples were synthesized using sodium silicate (Na2SiO3) and sodium hydroxide (NaOH) solution as alkaline solution in range of 0.5 M to 9 M. After mixing process, the geopolymer slurry was heated and stimulated geopolymerization reaction by different microwave powers at 200 W, 500 W and 700 W for 30 s, 60 s, 90 s and 120 s. The influence of NaOH concentration, microwave powers and heating times on the apparent bulk density, the water adsorption was focused. Results showed that the microwave powers …

Go to article

First-Principles Study On Structural And Electronic Properties Of P3ht-Graphene, Fia Amalia, Ari Dwi Nugraheni, Sholihun Sholihun Jan 2024

First-Principles Study On Structural And Electronic Properties Of P3ht-Graphene, Fia Amalia, Ari Dwi Nugraheni, Sholihun Sholihun

Journal of Metals, Materials and Minerals

Based on density functional theory, calculations have been carried out to study the structural and electronic properties of the polymer Poly (3-hexylthiophene) (P3HT) interacting with monolayer graphene as an active layer. (P3HT)1-graphene and (P3HT)2-graphene are optimized on graphene using the generalized-gradient-approximation type of the exchange-correlation functional. Adsorption energy, band gap, and charge transfer are calculated. The calculated adsorption energy shows that all systems have negative adsorption energy, indicating that the reaction is exothermic. Compared to (P3HT)1-graphene, (P3HT)2-graphene has a lower band gap. As for the charge transfer calculation, a negative ΔN indicates that electron transfers from P3HT to graphene.

Go to article

Integration Of Jackfruit Seed-Derived Carbon Dots And Electronic Nose For A Sensitive Detection Of Formaldehyde Vapor, Thitarat Prathumsuwan, Sumana Kladsomboon, Alfred Antony Christy, Insik In, Xiao Liang, Shufeng Song, Yao Wang, Thitirat Inprasit, Peerasak Paoprasert, Natee Sirisit Jan 2024

Integration Of Jackfruit Seed-Derived Carbon Dots And Electronic Nose For A Sensitive Detection Of Formaldehyde Vapor, Thitarat Prathumsuwan, Sumana Kladsomboon, Alfred Antony Christy, Insik In, Xiao Liang, Shufeng Song, Yao Wang, Thitirat Inprasit, Peerasak Paoprasert, Natee Sirisit

Journal of Metals, Materials and Minerals

The preparation of carbon dots from jackfruit seeds through a pyrolysis method at 280℃ and their use for the detection of formaldehyde were reported. The as-prepared carbon dots showed a high fluorescence efficiency with a quantum yield of 12.7% and excellent photostability and dispersibility in aqueous solution with a zeta potential of ‒62.5 mV. The integration of carbon dot thin film and a home-made optical electronic nose system possessed sensitivity towards formaldehyde vapor with a detection limit of 24.7%v/v across a linear range of 25%v/v to 100%v/v. Furthermore, the sensor showed the highest sensitivity towards formaldehyde against other volatile organic …

Go to article

Nano-Zno Prepared By Using Chaya And Mango Leaves Extract For Photocatalyst Of Methylene Blue, Sri Wahyu Suciyati, Junaidi Junaidi, Rudy Situmeang, Posman Manurung Jan 2024

Nano-Zno Prepared By Using Chaya And Mango Leaves Extract For Photocatalyst Of Methylene Blue, Sri Wahyu Suciyati, Junaidi Junaidi, Rudy Situmeang, Posman Manurung

Journal of Metals, Materials and Minerals

This research aimed to synthesize nano-ZnO from chaya (Cnidoscolus aconitifolius) and mango leaves extract (Mangifera indica) as environmentally friendly photocatalysts. Nano-ZnO was synthesized using green synthesis, with leaves extracts as reducing agents and nanoparticle size stabilizers. The samples were prepared using two methods, namely nano-ZnO-1 and nano-ZnO-2. The results of Fourier transform infrared spectroscopy (FTIR) analysis showed the contribution of metabolite compounds in nano-ZnO synthesis. X-ray diffraction (XRD) and transmission electron microscopy (TEM) showed the crystal size in nano range, with spherical nanorod morphology observed. Ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS) determined the band gap energy …

Go to article

Investigating The High-Impact Deformation Behavior Of Induced-Nano Precipitation Hardened In718 Alloy, Harrison Okechukwu Onovo, Muideen Adebayo Bodude, David Ehigie Esezobor, Thaddeus Tochukwu Akano Jan 2024

Investigating The High-Impact Deformation Behavior Of Induced-Nano Precipitation Hardened In718 Alloy, Harrison Okechukwu Onovo, Muideen Adebayo Bodude, David Ehigie Esezobor, Thaddeus Tochukwu Akano

Journal of Metals, Materials and Minerals

Superalloys are the preferred materials for modern high-rotational complex components due to their exceptional ability to maintain critical properties such as strength, oxidation/corrosion resistance, even under extreme temperatures and dynamic impacts. This study investigates the dynamic impact response of nanoprecipitation-hardened 718 alloy (NPH-718 alloy) under various loading conditions. The wrought nickel-based NPH-718 alloy was transformed into a nanostructured state through a precise heat treatment process involving controlled cooling rates (28℃∙s‒1 to 30℃∙s‒1). A mechanical compression test, leading to failure, was employed to assess the alloy's ability to withstand dynamic impacts. The compressive dynamic behavior of the alloy at high strain …

Go to article

Atmospheric Hydrochloric And Nitric Acid Leaching Of A Limonite Ore From The Wolo Mine Area, Southeast Sulawesi, Indonesia, Sufriadin -, Malyanus Yepta, Irzal Nur, Purwanto -, Rizky Amalia, Ulva Ria Irfan, Djabal Nur Basir, Tsubasa Otake Jan 2024

Atmospheric Hydrochloric And Nitric Acid Leaching Of A Limonite Ore From The Wolo Mine Area, Southeast Sulawesi, Indonesia, Sufriadin -, Malyanus Yepta, Irzal Nur, Purwanto -, Rizky Amalia, Ulva Ria Irfan, Djabal Nur Basir, Tsubasa Otake

Journal of Metals, Materials and Minerals

The atmospheric acid leaching studies of a limonite ore sample from the Wolo mine area, Southeast Sulawesi, Indonesia, have been performed using hydrochloric acid (HCl) and nitric acid (HNO3). The objectives of these studies were to compare the leaching degree of metals (Ni, Co, Fe, and Al) and to analyze the dissolution behavior of minerals under different acid concentrations. Mineralogical characterization of the ore sample was conducted using optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction, whereas chemical composition was determined by X-ray fluorescence (XRF) spectrometry and atomic absorption spectroscopy (AAS), respectively. An atmospheric leaching test was done with …

Go to article

Photocatalytic Degradation Of Ciprofloxacin Drug Utilizing Novel Pvdf/Polyaniline/ Lanthanum Strontium Manganate@Ag Composites, Swayam Aryam Behera, Ali Amanat, P. Ganga Raju Achary Jan 2024

Photocatalytic Degradation Of Ciprofloxacin Drug Utilizing Novel Pvdf/Polyaniline/ Lanthanum Strontium Manganate@Ag Composites, Swayam Aryam Behera, Ali Amanat, P. Ganga Raju Achary

Journal of Metals, Materials and Minerals

Poly (vinylidene fluoride) (PVDF) is the first-choice ferroelectric support or membrane material. The lanthanum strontium manganite (LSMO) is a well-known electrode material in the class of the solid oxide fuel cell (SOFC) materials. A set of four polymer composites PVDF-LSMO-PANI(5.0 wt%) with different amount of silver doping were fabricated with the silver nitrate and reducing agent. The characterization of these four novel PVDF based composites were characterized by the XRD, FTIR, SEM, UV-Visible DRS. The present communication highlights: (I) the effect of PANI in the PVDF-LSMO-PANI (PLP) composites towards the photocatalytic degradation of ciprofloxacin drug. (II) the effect of Ag …

Go to article

The Effect Of Two-Stage Heat Treatment On The Microstructure And Mechanical Properties Of High Chrome Austenitic Manganese Steel, Mohammad Reza Hermawan, Budi Hartono Setiamarga, Ilham Nur Hakim, Rizka Mulia Anggraeni Jan 2024

The Effect Of Two-Stage Heat Treatment On The Microstructure And Mechanical Properties Of High Chrome Austenitic Manganese Steel, Mohammad Reza Hermawan, Budi Hartono Setiamarga, Ilham Nur Hakim, Rizka Mulia Anggraeni

Journal of Metals, Materials and Minerals

In this research, heat-treatment was used to determine changes in the microstructure and mechanical characteristics of austenitic manganese steel equivalent to ASTM A128-C. Carbide formed in as-cast conditions is transformed into dispersed hardened austenite to increase the toughness of the material because it can inhibit dislocation movement. Heat treatment is carried out in two heating stages. The first stage of heating was carried out at a temperature of 625°C with a holding time varying by 2.5, 3.5, and 4.5 h, and the second stage was carried out at a temperature of 1000°C with a constant holding time of 1.5 h. …

Go to article

First Prev Next Last