Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 21931 - 21960 of 196021

Full-Text Articles in Engineering

Phosphate-Based Dechlorination Of Electrorefiner Salt Waste Using A Phosphoric Acid Precursor, Paige Murray, Harmony Werth, Sean Sullivan, Brian J. Riley, Michael Simpson, Charmayne E. Lonergan, Krista Carlson Jan 2024

Phosphate-Based Dechlorination Of Electrorefiner Salt Waste Using A Phosphoric Acid Precursor, Paige Murray, Harmony Werth, Sean Sullivan, Brian J. Riley, Michael Simpson, Charmayne E. Lonergan, Krista Carlson

Materials Science and Engineering Faculty Research & Creative Works

Electrochemical processing of spent nuclear fuel in molten chloride salts results in radioactive salt waste. Chlorine removal from the salt has been identified as an effective and efficient first step in the management of high-level waste. In this work, a simple salt was dechlorinated with a phosphoric acid phosphate precursor, resulting in a glassy dechlorinated product. The dechlorination efficacy was evaluated in air and argon environments. This work serves as an initial step to advance the technological readiness level of h3po4-based dechlorination step toward implementation of iron phosphate waste forms to immobilize electrochemical fuel reprocessing salt waste streams.

Go to article

Oxidation Of Additively Manufactured Zrb2–Sic In Air And In Co2 At 700–1000 °C, Marharyta Lakusta, Nicholas M. Timme, Abid H. Rafi, Jeremy Lee Watts, M. (Ming) C. (Chuan) Leu, Gregory E. Hilmas, William G. Fahrenholtz, David W. Lipke Jan 2024

Oxidation Of Additively Manufactured Zrb2–Sic In Air And In Co2 At 700–1000 °C, Marharyta Lakusta, Nicholas M. Timme, Abid H. Rafi, Jeremy Lee Watts, M. (Ming) C. (Chuan) Leu, Gregory E. Hilmas, William G. Fahrenholtz, David W. Lipke

Materials Science and Engineering Faculty Research & Creative Works

Oxidation behavior of additively manufactured zrb2–sic in air and in co2 is reported in the temperature range of 700–1000 °c. Observed scale morphologies in air and in co2 were similar, featuring an outer borosilicate layer and an inner porous zirconia layer containing partially oxidized silicon carbide particles and remnant borosilicate products. Oxide scale thicknesses and parabolic scaling constants in air were approximately twice those observed in co2 across all studied temperatures. Activation energies for oxidation of 140 ± 20 kj/mol in air and 110 ± 20 kj/mol in co2 were determined, indicating similar diffusion processes that appear to be rate-limiting. …

Go to article

Thermal And Electrical Properties Of Single-Phase High Entropy Carbide Ceramics, Paul M. Brune, Gregory E. Hilmas, William G. Fahrenholtz, Jeremy Lee Watts, Stefano Curtarolo Jan 2024

Thermal And Electrical Properties Of Single-Phase High Entropy Carbide Ceramics, Paul M. Brune, Gregory E. Hilmas, William G. Fahrenholtz, Jeremy Lee Watts, Stefano Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Thermal and Electrical Properties Were Investigated for Five Nominally Phase-Pure High Entropy Carbide Ceramics. the Compositions (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)C, (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C, (Hf0.2Mo0.2Ta0.2Ti0.2Zr0.2)C, (Hf0.2Ta0.2Ti0.2W0.2Zr0.2)C, and (Hf0.2Mo0.2Ti0.2W0.2Zr0.2)C Were Synthesized by Carbothermal Reduction of Oxides. the Thermal Diffusivity and Heat Capacity Were Measured from Room Temperature to 1800°C. the Room Temperature Thermal Conductivity Ranged from 5.1 W/mK for (Hf0.2Mo0.2Ti0.2W0.2Zr0.2)C to 9.0 W/mK for (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C. the Thermal Conductivity Increased over the Temperature Range with Maximum Conductivities of 19.6 W/mK Measured for (Hf0.2Mo0.2Ta0.2Ti0.2Zr0.2)C to 29.7 W/mK for (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C at 1800°C. the Electron Contribution to Thermal Conductivity Calculated from Measured Electrical Resistivity Varied from 41% to 52% of the …

Go to article

High Temperature Oxidation Regime Transitions In Hafnium Carbide, Jonathan A. Scott, Xiaoqing He, David W. Lipke Jan 2024

High Temperature Oxidation Regime Transitions In Hafnium Carbide, Jonathan A. Scott, Xiaoqing He, David W. Lipke

Materials Science and Engineering Faculty Research & Creative Works

Understanding the oxidation behavior of hafnium carbide is crucial to its application in extreme environments. In this work, the transition in high-temperature oxidation kinetics regimes in hafnium carbide is explained based on phase equilibria considerations supported by observed changes in oxide scale microstructure evolution associated with different transformation pathways. Below, a composition-dependent critical temperature and oxygen pressure, hafnium carbide first transforms to an amorphous material with nominal composition HfO2C followed by phase separation into carbon and hafnia domains. Subsequently, gaseous transport through a nanometric pore network formed by oxidative removal of phase-separated carbon becomes rate-limiting. Above this critical point, the …

Go to article

Optimized Gadolinium-Do3a Loading In Raft-Polymerized Copolymers For Superior Mr Imaging Of Aging Blood-Brain Barrier, Hunter A. Miller, Aaron Priester, Evan T. Curtis, Krista Hilmas, Ashleigh Abbott, Forrest M. Kievit, Anthony J. Convertine Jan 2024

Optimized Gadolinium-Do3a Loading In Raft-Polymerized Copolymers For Superior Mr Imaging Of Aging Blood-Brain Barrier, Hunter A. Miller, Aaron Priester, Evan T. Curtis, Krista Hilmas, Ashleigh Abbott, Forrest M. Kievit, Anthony J. Convertine

Materials Science and Engineering Faculty Research & Creative Works

The development of gadolinium-based contrast agents (GBCAs) has been pivotal in advancing magnetic resonance imaging (MRI), offering enhanced soft tissue contrast without ionizing radiation exposure. Despite their widespread clinical use, the need for improved GBCAs has led to innovations in ligand chemistry and polymer science. We report a novel approach using methacrylate-functionalized DO3A ligands to synthesize a series of copolymers through direct reversible addition-fragmentation chain transfer (RAFT) polymerization. This technique enables precise control over the gadolinium content within the polymers, circumventing the need for subsequent conjugation and purification steps, and facilitates the addition of other components such as targeting ligands. …

Go to article

Beneficiation Of Lunar Regolith Simulants Through Electrostatic Sieving And Magnetic Separation, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han Jan 2024

Beneficiation Of Lunar Regolith Simulants Through Electrostatic Sieving And Magnetic Separation, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

In the light of future development of lunar structures, in-situ feldspar beneficiation is imperative for metal extraction. This research incorporates the tandem use of electrostatic sieving and magnetic separation for collecting a specific size range and mineral composition from lunar soil that optimizes subsequent chemical processing. While earlier works focused on silt-sized particles, this work expands that range up to medium-grained sand with a greater variety of potential lunar regolith compositions. This work shows that a 2.5 kV, 7 Hz to 30Hz frequency, single-phase square wave can lift silt and fine sand for collection. This lifting is successful directly from …

Go to article

High-Temperature Oxidation Behavior Of High Entropy Carbide (Tanbtiv)C In Atmospheres With Different Oxygen Contents, Ruoyu Chen, Hongbin An, Jie Zhan, Saisai Li, Aiqin Mao, Haiming Wen Jan 2024

High-Temperature Oxidation Behavior Of High Entropy Carbide (Tanbtiv)C In Atmospheres With Different Oxygen Contents, Ruoyu Chen, Hongbin An, Jie Zhan, Saisai Li, Aiqin Mao, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

A high entropy carbide (TaNbTiV)C was fabricated via spark plasma sintering of high entropy powders that were prepared using a molten salt method. The as-fabricated high entropy carbide was then investigated for its high-temperature oxidation behavior at 850 °C, under atmospheres with three different oxygen contents (20 vol%, 40 vol%, and 60 vol%). After the high-temperature oxidation process, the main phases observed in all the specimens were incompletely oxidized phase (NbxTi1-x)CyO2-y and oxides (Nb0.5Ta0.5)2O5, TiO2, and Nb2O5. Importantly, the …

Go to article

Strength Comparison For Fully Dense Zirconium Diboride Ceramics Tested By Different Methods, Darko Kosanović, Suzana Filipović, Isaak Trajković, Nina Obradović, Paul M. Brune, Gregory E. Hilmas, William G. Fahrenholtz Jan 2024

Strength Comparison For Fully Dense Zirconium Diboride Ceramics Tested By Different Methods, Darko Kosanović, Suzana Filipović, Isaak Trajković, Nina Obradović, Paul M. Brune, Gregory E. Hilmas, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

The strength of zirconium diboride ceramics was tested by three different methods, 3-point flexure, 4-point flexure, and compression. Nearly full-density ceramics were obtained by hot pressing commercial ZrB2 powder with the addition of.5 wt.% carbon as a sintering aid. The thermal properties and hardness were studied for ZrB2 milled with ZrB2 and WC media. Based on phase purity and higher thermal conductivity, ZrB2 ceramics prepared from powders milled with ZrB2 media were selected for mechanical property studies. The strength in 3-point flexure was 546 ± 55 MPa. The flexure strength was 476 ± 41 MPa …

Go to article

Kinetic Modeling Of Electrostatic Sieving For Lunar Regolith Beneficiation: Case Studies, Easton Ingram, Emmanuela Amen Eze, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han Jan 2024

Kinetic Modeling Of Electrostatic Sieving For Lunar Regolith Beneficiation: Case Studies, Easton Ingram, Emmanuela Amen Eze, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

A new kinetic particle modeling framework was developed to investigate electrostatic transport of lunar regolith particles with applications to the concept of electrostatic sieving. The new approach is based on kinetic particle dynamics and includes major modules of sampling the particle size distribution, solving electric fields, and tracking motion of charged dust grains. Case studies for a concept of electrostatic sieving were chosen to validate the new model. The simulation achieved similar yields reported in previous works, which served as validation of the model. The new model is computationally efficient and could serve as a design, analysis, and optimization tool.

Go to article

Synergistic Hardening In A Dual Phase High-Entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 Ultra-High Temperature Ceramic, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas, Stefano Curtarolo Jan 2024

Synergistic Hardening In A Dual Phase High-Entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 Ultra-High Temperature Ceramic, Rubia Hassan, William G. Fahrenholtz, Gregory E. Hilmas, Stefano Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

A dual phase high-entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 ultra-high temperature ceramic was synthesized using a single step boro-carbothermal reduction route. The synthesized powder was densified by spark plasma sintering at 2000°C, resulting in complete solid solution formation and a relative density of ≈99%. The dual phase ceramic was 43 vol% high-entropy carbide and 57 vol% high-entropy boride. The grain sizes were 0.85 ± 0.34 µm for the carbide and 0.87 ± 0.33 µm for the boride with minimal residual oxide (0.2 vol%) detected in the microstructure. The resulting composition had a higher microhardness than the individual boride and carbide ceramics across the range …

Go to article

Effect Of Sc Spatial Distribution On The Electronic And Ferroelectric Properties Of Alscn, Bipin Bhattarai, Xiaoman Zhang, Wangwang Xu, Yijia Gu, W. J. Meng, Andrew C. Meng Jan 2024

Effect Of Sc Spatial Distribution On The Electronic And Ferroelectric Properties Of Alscn, Bipin Bhattarai, Xiaoman Zhang, Wangwang Xu, Yijia Gu, W. J. Meng, Andrew C. Meng

Materials Science and Engineering Faculty Research & Creative Works

While aluminum scandium nitride based ferroelectric materials have shown significant promise for non-volatile memory applications, difficulties relating challenges in device performance, such as electrical leakage, to structural characteristics motivate improved understanding of the fundamental structure-property relationship. Spinodal decomposition has been reported in this material system, consistent with our observation of compositional segregation in AlScN films grown by reactive sputter epitaxy. To better understand the effects of spatially non-uniform Sc concentrations, the electronic and ferroelectric (FE) properties of AlScN as a function of Sc distribution are studied using density functional theory (DFT). We explore the impact of Sc-rich atomic planes in …

Go to article

Effect Of Ph And Hydroxyapatite-Like Layer Formation On The Antibacterial Properties Of Borophosphate Bioactive Glass Incorporated Poly(Methyl Methacrylate) Bone Cement, Kara A. Hageman, Rebekah L. Blatt, William A. Kuenne, Richard K. Brow, Terence E. Mciff Jan 2024

Effect Of Ph And Hydroxyapatite-Like Layer Formation On The Antibacterial Properties Of Borophosphate Bioactive Glass Incorporated Poly(Methyl Methacrylate) Bone Cement, Kara A. Hageman, Rebekah L. Blatt, William A. Kuenne, Richard K. Brow, Terence E. Mciff

Materials Science and Engineering Faculty Research & Creative Works

Infection is a leading cause of total joint arthroplasty failure. Current preventative measures incorporate antibiotics into the poly (methyl methacrylate) (PMMA) bone cement that anchors the implant into the natural bone. With bacterial resistance to antibiotics on the rise, the development of alternative antibacterial materials is crucial to mitigate infection. Borate bioactive glass, 13–93-B3, has been studied previously for use in orthopedic applications due to its ability to be incorporated into bone cements and other scaffolds, convert into hydroxyapatite (HA)-like layer, and enhance the osseointegration and antibacterial properties of the material. The purpose of this study is to better understand …

Go to article

Development Of A Highly Loaded Zirconium Carbide Paste For Material Extrusion Additive Manufacturing, Clare Sabata, Austin J. Martin, Jeremy L. Watts, Gregory E. Hilmas Jan 2024

Development Of A Highly Loaded Zirconium Carbide Paste For Material Extrusion Additive Manufacturing, Clare Sabata, Austin J. Martin, Jeremy L. Watts, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

A highly loaded, aqueous-based zirconium carbide (ZrC) paste was developed for ceramic on-demand extrusion (CODE). Commercial ZrC powder was ball milled to reduce the particle size to ∼1 μm. Paste composition was determined by rheological characterization and observation of printing behavior; the final paste consisted of 46–47 vol% ZrC, 43.5 vol% distilled water, 8.1 vol% dispersant, and 1.6 vol% binder. Rheological characterization of the paste showed a yield stress of ∼8 Pa and shear thinning behavior (ΔG′/Δσ* = −55). The paste was printed using a 610 μm nozzle; a test print showed shape fidelity using the developed paste. A pressureless …

Go to article

Impact Of Quenching Intensity Conditions On Using A Finite Element Model To Investigate The Microstructure And Hardenability Of Low-Alloy Steel, J. S. Alabi, E. Heidari, M. F. Buchely, K. Chandrashekhara, S. N. Lekakh, R. J. O'Malley, V. Athavale, A. Kumar Jan 2024

Impact Of Quenching Intensity Conditions On Using A Finite Element Model To Investigate The Microstructure And Hardenability Of Low-Alloy Steel, J. S. Alabi, E. Heidari, M. F. Buchely, K. Chandrashekhara, S. N. Lekakh, R. J. O'Malley, V. Athavale, A. Kumar

Materials Science and Engineering Faculty Research & Creative Works

Quenching is one of the primary processes to improve mechanical properties in steels, particularly hardness. Quenching is well established for different geometries of individually treated steel components; while in-steam quenching of large diameter continuously cast steel bar has several specific features which are difficult and costly to experimentally optimize. The end-quench Jominy test has been used extensively to study the hardenability of different steel grades. Different numerical, analytical, and empirical models have been developed to simulate the Jominy process and to understand quenching of steels. However, it is not straight forward to translate experimental data from Jominy test on instream …

Go to article

Magnetic Separation Of Lunar Regolith Simulants With Applications To In Situ Resource Utilization On The Moon, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han Jan 2024

Magnetic Separation Of Lunar Regolith Simulants With Applications To In Situ Resource Utilization On The Moon, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

The development of in situ resource utilization (ISRU) for metal extraction is imperative as a steppingstone for habitation construction in lunar and non-terrestrial environments. Separation of minerals by chemical composition is important to optimize metal and oxygen liberation from lunar ore. to this effect, devices capable of separating aluminum bearing minerals from iron-bearing minerals from the lunar regolith simulants have been developed. Twenty-eight different simulants have been used in this study. a dual-belt separator was designed to reduce middlings. Para-magnetic minerals were reliably separated using a neodymium N52-magnet-separator system. Effective separation of aluminum-bearing minerals from iron-bearing minerals was greater than …

Go to article

Impact Of Quenching Intensity Conditions On Using A Finite Element Model To Investigate The Microstructure And Hardenability Of Low-Alloy Steel, J. S. Alabi, E. Heidari, M. F. Buchely, K. Chandrashekhara, S. N. Lekakh, R. J. O'Malley, V. Athavale, A. Kumar Jan 2024

Impact Of Quenching Intensity Conditions On Using A Finite Element Model To Investigate The Microstructure And Hardenability Of Low-Alloy Steel, J. S. Alabi, E. Heidari, M. F. Buchely, K. Chandrashekhara, S. N. Lekakh, R. J. O'Malley, V. Athavale, A. Kumar

Materials Science and Engineering Faculty Research & Creative Works

Quenching is one of the primary processes to improve mechanical properties in steels, particularly hardness. Quenching is well established for different geometries of individually treated steel components; while in-steam quenching of large diameter continuously cast steel bar has several specific features which are difficult and costly to experimentally optimize. the end-quench Jominy test has been used extensively to study the hardenability of different steel grades. Different numerical, analytical, and empirical models have been developed to simulate the Jominy process and to understand quenching of steels. However, it is not straight forward to translate experimental data from Jominy test on instream …

Go to article

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han Jan 2024

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Go to article

Quantification Of Swelling In Hematite Pellets Reduced Using Hydrogen–Nitrogen Gas Mixture, Amogh Meshram, Yuri Korobeinikov, Xingwen Wei, Ronald J. O'Malley, Seetharaman Sridhar Jan 2024

Quantification Of Swelling In Hematite Pellets Reduced Using Hydrogen–Nitrogen Gas Mixture, Amogh Meshram, Yuri Korobeinikov, Xingwen Wei, Ronald J. O'Malley, Seetharaman Sridhar

Materials Science and Engineering Faculty Research & Creative Works

Iron ore pellets are reduced in a 50%H2–50%N2 1 atm gas mixture at 750, 800, 850, 900, and 950 °C while simultaneously documenting swelling (change in pellet radius) and weight change. Swelling increases with increasing temperature, with catastrophic swelling (>20% of reduction swelling index) observed at 850, 900, and 950 °C. As the pellet is reduced, the pellet radius increases until 40–50% reduction is achieved, followed by a decrease in diameter beyond 40–50% reduction at 750 and 850 °C. At 950 °C, the pellet radius continues to increase with additional pellet reduction without any subsequent decrease in diameter. Scanning …

Go to article

Water Vapor Oxidation Of Sic Layer Of Tristructural Isotropic Particles, Visharad Jalan, Adam Bratten, Matthew Luebbe, Haiming Wen Jan 2024

Water Vapor Oxidation Of Sic Layer Of Tristructural Isotropic Particles, Visharad Jalan, Adam Bratten, Matthew Luebbe, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Tri structural isotropic (TRISO) fuel particles, developed for use in high-temperature gas-cooled nuclear reactors, can be subjected to oxidizing environments in off-normal accident scenarios. In this study, surrogate TRISO fuel particles were oxidized at 1000–1350°C for 4 h in 20 kPa water vapor atmosphere balanced with ultrahigh-purity helium gas. The oxide scale morphology and thickness were studied via scanning electron microscopy, focused ion beam, and transmission electron microscopy. The oxide thickness increased as the oxidation temperature was increased. Although the oxide scale at 1000°C was completely amorphous, pockets of crystalline oxide were observed on particles oxidized at 1200 and 1300°C. …

Go to article

Bipolar Hipims Kick-Pulse For High Hardness In High-Entropy Boride Thin Films, Nathaniel S. Mcilwaine, Nestor O.Marquez Rios, Eva Zurek, Donald W. Brenner, William G. Fahrenholtz, Stefano Curtarolo, Douglas E. Wolfe, Jon Paul Maria Jan 2024

Bipolar Hipims Kick-Pulse For High Hardness In High-Entropy Boride Thin Films, Nathaniel S. Mcilwaine, Nestor O.Marquez Rios, Eva Zurek, Donald W. Brenner, William G. Fahrenholtz, Stefano Curtarolo, Douglas E. Wolfe, Jon Paul Maria

Materials Science and Engineering Faculty Research & Creative Works

We report a microhardness indentation study for multicomponent refractory metal boride thin films that belong to the family of high-entropy ceramics exhibiting superior hardness and high temperature properties. We focus on the nominally equimolar composition (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2) B2, which we refer to as HEB3, on c-plane sapphire substrates. Thin films are prepared using bipolar high power impulse magnetron sputtering (HiPIMS), where the positive kick pulse is optimized to produce films with high density, high crystallinity, and a microstructure that is isometric in nature as revealed by cross-sectional fracture surface imaging, X-ray diffraction, and X-ray reflectometry. Low-load Knoop indentation is used to …

Go to article

Sic Addition To A Dual Phase High Entropy Ultra-High Temperature Ceramic, Rubia Hassan, William G. Fahrenholtz, Kantesh Balani, Gregory E. Hilmas, Jeremy Watts Jan 2024

Sic Addition To A Dual Phase High Entropy Ultra-High Temperature Ceramic, Rubia Hassan, William G. Fahrenholtz, Kantesh Balani, Gregory E. Hilmas, Jeremy Watts

Materials Science and Engineering Faculty Research & Creative Works

Dual phase (Hf,Ta,Ti,W,Zr)B2-(Hf,Ta,Ti,W,Zr)C high entropy ultra-high temperature ceramics were processed from commercial diboride and carbide powders with and without SiC additions. A 30-min hold at a maximum temperature of 1850 °C in spark plasma sintering resulted in a relative density of ∼95 %, which increased to ∼100 % with the addition of 7.5 wt.% SiC. The compositions did not reach chemical equilibrium under the given sintering conditions resulting in an inhomogeneous distribution of transition metals in both the boride and carbide phases. The addition of SiC improved densification by inhibiting grain growth, which reduced the grain size from 9.0 ± …

Go to article

Cal Poly Craft Center Wedging Tables, Cooper Christopher Strong Jan 2024

Cal Poly Craft Center Wedging Tables, Cooper Christopher Strong

Construction Management

The Craft Center, located on Cal Poly's campus, is where students can unwind from stressful coursework and engage in activities like pottery, surfboard shaping, and stained glass. The pottery studio needed new wedging tables, which are essential for removing air from clay before shaping it. The project involved building two new 7’ x 2.5’ tables that would fit well in the space and be durable. Designed to be 33” tall, these tables are accessible to students of varying heights. They feature a concrete surface that is both durable and porous, helping to absorb some moisture during use. The previous tables …

Go to article

Reinstatement Of The Poly Canyon Caretaker Program Through The Development Of A Tiny Home Community, Leily Martin Jan 2024

Reinstatement Of The Poly Canyon Caretaker Program Through The Development Of A Tiny Home Community, Leily Martin

Construction Management

The Poly Canyon Experimental Structures Laboratory, through its Design/Build program, is unique in the educational opportunity it provides Cal Poly College of Architecture and Environmental Design (CAED) students. However, since the conclusion of the Caretaker Program in 2011, the facility’s structures have deteriorated due to vandalism, purposeful destruction, and weathering. This study examines the perspectives of CAED students, the interim CAED Dean, Kevin Dong, and Cal Poly Risk Manager, Mike Morgan, on the effectiveness in reinstating the Caretaker Program through the development of a tiny home community. Results indicated educational value in this facility, so addressing these issues must occur …

Go to article

Multiple Imputation For Robust Cluster Analysis To Address Missingness In Medical Data, Arnold Harder, Gayla R. Olbricht, Godwin Ekuma, Daniel B. Hier, Tayo Obafemi-Ajayi Jan 2024

Multiple Imputation For Robust Cluster Analysis To Address Missingness In Medical Data, Arnold Harder, Gayla R. Olbricht, Godwin Ekuma, Daniel B. Hier, Tayo Obafemi-Ajayi

Mathematics and Statistics Faculty Research & Creative Works

Cluster Analysis Has Been Applied To A Wide Range Of Problems As An Exploratory Tool To Enhance Knowledge Discovery. Clustering Aids Disease Subtyping, I.e. Identifying Homogeneous Patient Subgroups, In Medical Data. Missing Data Is A Common Problem In Medical Research And Could Bias Clustering Results If Not Properly Handled. Yet, Multiple Imputation Has Been Under-Utilized To Address Missingness, When Clustering Medical Data. Its Limited Integration In Clustering Of Medical Data, Despite The Known Advantages And Benefits Of Multiple Imputation, Could Be Attributed To Many Factors. This Includes Methodological Complexity, Difficulties In Pooling Results To Obtain A Consensus Clustering, Uncertainty Regarding …

Go to article

Cascaded Weak Reflector Coaxial Cable Structure For Point And Distributed Large-Strain Sensing, Chen Zhu, Osamah Alsalman, Jie Huang Jan 2024

Cascaded Weak Reflector Coaxial Cable Structure For Point And Distributed Large-Strain Sensing, Chen Zhu, Osamah Alsalman, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we present a truly distributed sensing modality based on a cascaded weak reflector coaxial cable structure (CWR-CCS) for large strain measurements. Compared to an optical fiber, a coaxial cable is much more robust and has a larger strain capability to survive harsh conditions, which may enable important applications in structural health monitoring. By drilling serial shallow holes into a commercial flexible coaxial cable perturbing the local impedance along its axial direction, CWRs along the coaxial cable are introduced due to impedance mismatch, forming the CWR-CCS. Gating a certain number of sequential reflectors in the time-domain reflection signal …

Go to article

Segmented Fiber Optic Sensors Based On Hybrid Microwave-Photonic Interrogation, Wassana Naku, Osamah Alsalman, Jie Huang, Chen Zhu Jan 2024

Segmented Fiber Optic Sensors Based On Hybrid Microwave-Photonic Interrogation, Wassana Naku, Osamah Alsalman, Jie Huang, Chen Zhu

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we propose and demonstrate a novel concept of segmented fiber optic sensors by integrating the fiber Bragg grating (FBG) reflector modality and a hybrid interrogation technique enabled by microwave photonics. As a proof of concept, a radiofrequency Fabry-Perot interferometer (FPI) based on an optical fiber with two FBGs as the two reflectors of the Fabry-Perot (FP) cavity is constructed. By measuring the frequency response of the FPI device followed by a joint-time-frequency-domain analysis, the interferogram of the FPI in the microwave domain and the time-domain signal of the FBGs can be unambiguously reconstructed. Thus, the two elements …

Go to article

Statistical Eye Diagrams For High-Speed Interconnects Of Packages: A Review, Junyong Park, Donghyun Kim Jan 2024

Statistical Eye Diagrams For High-Speed Interconnects Of Packages: A Review, Junyong Park, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

An eye diagram, a critical metric in signal integrity analysis for high-speed interconnects such as packages, interposer, and printed circuit boards (PCBs), is generated by superposition of the received waveform. Obtaining an eye diagram is time-consuming, thus signal integrity analysis is inefficient. This article reviews that have been proposed to overcome this limitation. The statistical eye diagram provides a probability distribution depending on a sampling time and voltage, therefore it can be expanded to other metrics, such as the bit-error rate and shmoo plot. This article introduces previous research on statistical eye diagrams applied to complementary metal-oxide-semiconductors (CMOSs), noise, and …

Go to article

A Segmentation Approach For Predicting Plane Wave Coupling To Pcb Structures, Shengxuan Xia, James Hunter, Aaron Harmon, Ahmed M. Hassan, Victor Khilkevich, Daryl G. Beetner Jan 2024

A Segmentation Approach For Predicting Plane Wave Coupling To Pcb Structures, Shengxuan Xia, James Hunter, Aaron Harmon, Ahmed M. Hassan, Victor Khilkevich, Daryl G. Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Evaluating the far-field radio frequency (RF) susceptibility of electronic devices often depends on extensive testing or full wave simulations. These methods are effective when complete system information is available but require substantial time and resources to evaluate a large number of variations in system configurations, where trace routings, integrated circuit (IC) package styles, trace terminations, arrival angle, and polarization of incoming wave, etc., are varied from one configuration to another. The goal of the following article is to develop simulation techniques for studying the statistical characteristics of coupling to typical printed circuit board (PCB) structures. Simulation time can be reduced …

Go to article

A Novel Physics-Assisted Genetic Algorithm For Decoupling Capacitor Optimization, Li Jiang, Ling Zhang, Shurun Tan, Da Li, Chulsoon Hwang, Jun Fan, Er Ping Li Jan 2024

A Novel Physics-Assisted Genetic Algorithm For Decoupling Capacitor Optimization, Li Jiang, Ling Zhang, Shurun Tan, Da Li, Chulsoon Hwang, Jun Fan, Er Ping Li

Electrical and Computer Engineering Faculty Research & Creative Works

This article proposes a new physics-assisted genetic algorithm (PAGA) for decoupling capacitor (decap) optimization in power distribution networks (PDNs), which is a highly efficient approach to minimizing the number of decaps within an enormous search space. In the proposed PAGA method, the priority of the decap ports is first determined based on their physical loop inductances. Then, an initial solution is quickly obtained by placing decaps sequentially on the port with the highest priority. Subsequently, a GA with prior physical knowledge is developed to find better decap solutions progressively. A port removal scheme that eliminates the low-priority ports and a …

Go to article

Adaptive Resilient Control For A Class Of Nonlinear Distributed Parameter Systems With Actuator Faults, Hasan Ferdowsi, Jia Cai, Sarangapani Jagannathan Jan 2024

Adaptive Resilient Control For A Class Of Nonlinear Distributed Parameter Systems With Actuator Faults, Hasan Ferdowsi, Jia Cai, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a new model-based fault resilient control scheme for a class of nonlinear distributed parameter systems (DPS) represented by parabolic partial differential equations (PDE) in the presence of actuator faults. A Luenberger-like observer on the basis of nonlinear PDE representation of DPS is developed with boundary measurements. A detection residual is generated by taking the difference between the measured output of the DPS and the estimated one given by the observer. Once a fault is detected, an unknown actuator fault parameter vector together with a known basis function is utilized to adaptively estimate the fault dynamics. A novel …

Go to article

First Prev Next Last