Engineering Commons^™

Plc Course Development, Leonard Hernandez, Jacqueline Grace Radding

Electrical Engineering

The goal of this project is to design and construct the first lab experiment for the newly developed EE435 laboratory course. The experiment entails PLC programming to automate LED lighting in a simulated building. Starting with why PLCs are used, how to use the interface of EcoStruxure Control Expert V15.0 and practice using logic to control the dimming of a Light Emitting Diode (LED) to sustain a certain number of lumens consistent in a zone. Through the lab manual developed in this project, students will gain experience of creating logic designs using Function Block Diagram (FBD) and learn the layout …

Improvements Of Hybrid Ac/Dc House Prototype, Arden Abude

Electrical Engineering

This is an iteration from previous designs of the Hybrid AC/DC House with a systematic addition of a portable AC power supply unit. This iteration for the Hybrid AC/DC House is an innovation of independence for sustainable housing solutions. It will serve as an alternative for rural communities needing power to rely on self-sustainable microgrids rather than large-scale AC electric grids. The addition of a portable AC power supply would allow the microgrid to remove its reliance on AC power from the larger grid and would elevate the system to complete energy independence. The microgrid has DC power generated from …

Characterization Of Microstructural And Mechanical Properties Of 17-4 Ph Stainless Steel By Cold Rolled And Machining Vs. Dmls Additive Manufacturing, Pablo Moreno-Garibaldi, Melvyn Alvarez-Vera, Juan Alfonso Beltrán-Fernández, Rafael Carrera-Espinoza, Héctor Manuel Hdz-García, J. C. Díaz-Guillen, Rita Muñoz-Arroyo, Javier A. Ortega, Paul Molenda

Mechanical Engineering Faculty Publications

The 17-4 PH stainless steel is widely used in the aerospace, petrochemical, chemical, food, and general metallurgical industries. The present study was conducted to analyze the mechanical properties of two types of 17-4 PH stainless steel—commercial cold-rolled and direct metal laser sintering (DMLS) manufactured. This study employed linear and nonlinear tensile FEM simulations, combined with various materials characterization techniques such as tensile testing and nanoindentation. Moreover, microstructural analysis was performed using metallographic techniques, optical microscopy, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). The results on the microstructure for 17-4 PH DMLS stainless steel reveal …

Jet-Driven Mixing Regimes Identified In The Unsteady Isothermal Filling Of Rectangular Municipal Water Storage Tanks, Pramod Narayan Bangalore, K. (Kelly) O. Homan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Poor mixing of old and new water in municipal water storage vessels is a well-documented basis for potentially harmful water quality degradation in drinking water distribution systems. This numerical study investigates the effects of inflow and operational variables on mixing in the jet-driven filling process, with a particular focus on the transition from inadequate to sufficient mixing levels. An isothermal unsteady reynolds-averaged-navier-stokes volume-of-fluid (RANS-VOF) simulation is used to model the variable-volume filling process, accounting for the moving free surface following a draw-down in the stored water volume. A low diffusivity tracer is used to mark the old-water volume, and a …

Heat Treatments For Minimization Of Residual Stresses And Maximization Of Tensile Strengths Of Scalmalloy® Processed Via Directed Energy Deposition, Rachel Boillat-Newport, Sriram Praneeth Isanaka, Jonathan Kelley, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Scalmalloy® is an Al-Mg-Sc-Zr-Based Alloy Specifically Developed for Additive Manufacturing (AM). This Alloy is Designed for Use with a Direct Aging Treatment, as Recommended by the Manufacturer, Rather Than with a Multistep Treatment, as Often Seen in Conventional Manufacturing. Most Work with Scalmalloy® is Conducted using Powder Bed Rather Than Powder-Fed Processes. This Investigation Seeks to Fill This Knowledge Gap and Expand Beyond Single-Step Aging to Promote an overall Balanced AM-Fabricated Component. for This Study, Directed Energy Deposition (DED)-Fabricated Scalmalloy® Components Were Subjected to Low-Temperature Treatments to Minimize Residual Stresses Inherent in the Material Due to the Layer-By-Layer Build Process. …

Continual Online Learning-Based Optimal Tracking Control Of Nonlinear Strict-Feedback Systems: Application To Unmanned Aerial Vehicles, Irfan Ganie, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

A novel optimal trajectory tracking scheme is introduced for nonlinear continuous-time systems in strict feedback form with uncertain dynamics by using neural networks (NNs). The method employs an actor-critic-based NN back-stepping technique for minimizing a discounted value function along with an identifier to approximate unknown system dynamics that are expressed in augmented form. Novel online weight update laws for the actor and critic NNs are derived by using both the NN identifier and Hamilton-Jacobi-Bellman residual error. A new continual lifelong learning technique utilizing the Fisher Information Matrix via Hamilton-Jacobi-Bellman residual error is introduced to obtain the significance of weights in …

Toward Smart And Sustainable Cement Manufacturing Process: Analysis And Optimization Of Cement Clinker Quality Using Thermodynamic And Data-Informed Approaches, Jardel P. Gonçalves, Taihao Han, Gaurav Sant, Narayanan Neithalath, Jie Huang, Aditya Kumar

Electrical and Computer Engineering Faculty Research & Creative Works

Cement manufacturing is widely recognized for its harmful impacts on the natural environment. In recent years, efforts have been made to improve the sustainability of cement manufacturing through the use of renewable energy, the capture of CO₂ emissions, and partial replacement of cement with supplementary cementitious materials. To further enhance sustainability, optimizing the cement manufacturing process is essential. This can be achieved through the prediction and optimization of clinker phases in relation to chemical compositions of raw materials and manufacturing conditions. Cement clinkers are produced by heating raw materials in kilns, where both raw material compositions and processing conditions …

Advances In Growth, Doping, And Devices And Applications Of Zinc Oxide, Vishal Saravade, Zhe Chuan Feng, Manika Tun Nafisa, Chuanle Zhou, Na Lu, Benjamin Klein, Ian T. Ferguson

Electrical and Computer Engineering Faculty Research & Creative Works

Zinc oxide is a breakthrough multifunctional material of emerging interest applicable in the areas of electronics, computing, energy harvesting, sensing, optoelectronics, and biomedicine. Zno has a direct and wide bandgap and high exciton binding energy. It is nontoxic, earth-abundant, and biocompatible. However, the growth and characterization of high-quality zno has been a challenge and bottleneck in its development. Efforts have been made to synthesize device-quality zinc oxide and unleash its potential for multiple advanced applications. Zno could be grown as thin films, nanostructures, or bulk, and its properties could be optimized by tuning the growth techniques, conditions, and doping. Zinc …

Optimal Abort Guidance And Experimental Verification Based On Feature Learning, Vinay Kenny, Sixiong You, Chaoying Pei, Godfrey Hendrix, Roha Gul, Ran Dai, Jeremy Rea

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The abort mission refers to the mission where the landing vehicle needs to terminate the landing mission when an anomaly happens and be safely guided to the desired orbit. This paper focuses on solving the time-optimal abort guidance (TOAG) problem in real-time via the feature-based learning method. First, according to the optimal control theory, the features are identified to represent the optimal solutions of TOAG using a few parameters. After that, a sufficiently large data set of time-optimal abort trajectories is generated offline by solving the TOAG problems with different initial conditions. Then, the features are extracted for all generated …

Technology Assessment For Cybersecurity Organizational Readiness: Case Of Airlines Sector And Electronic Payment, Sultan Ayed Alghamdi, Tugrul Daim, Saeed Mohammed Alzahrani

Engineering and Technology Management Faculty Publications and Presentations

Payment processing systems have advanced significantly in the airline business. Because e-payments are easy, they have captured the attention of many companies in the aviation industry and are quickly becoming the dominant means of payment. However, as technology advances, fraud grows at a comparable rate. Over the years, there has been a surge in payment fraud incidents in the airline sector, reducing the platform's trustworthiness. Despite attempts to eliminate epayment fraud, decision-makers lack the technical expertise required to use the finest fraud detection and prevention assessments. This research recognizes the lack of an established decision model as a hurdle and …

Uncovering The Critical Drivers Of Blockchain Sustainability In Higher Education Using A Deep Learning-Based Hybrid Sem-Ann Approach, Mohammed Alshamsi, Mostafa Al-Emran, Tugrul Daim, Mohammed A. Al-Sharafi, Gulin Idil Sonmezturk Bolatan, Khaled Shaalan

Engineering and Technology Management Faculty Publications and Presentations

The increasing popularity of Blockchain technology has led to its adoption in various sectors, including higher education. However, the sustainability of Blockchain in higher education is yet to be fully understood. Therefore, this research examines the determinants affecting Blockchain sustainability by developing a theoretical model that integrates the protection motivation theory (PMT) and expectation confirmation model (ECM). Based on 374 valid responses collected from university students, the proposed model is evaluated through a deep learning-based hybrid structural equation modeling (SEM) and artificial neural network (ANN) approach. The PLS-SEM results confirmed most of the hypotheses in the proposed model. The sensitivity …

A Novel Data Fusion Fr Amework To Enhance Contextual Awareness Of The Autonomous Vehicles For Accurate Decision Making, Henry Alexander Ignatious

Dissertations

Autonomous driving has the potential to bring significant changes and benefits to various aspects of transportation. Autonomous vehicles (AVs) use a combination of advanced sensors, cameras, radar, lidar, GPS, maps, and AI algorithms to perceive their environment, make decisions, and control their movements. Though there is a significant increase in the AVs utility, there are several challenges associated with the AVs among which ensuring safety and security for a reliable drive is still an existing challenge. The majority of accidents involving the AVs result from faulty decision-making resulting in fatal incidents. Multiple elements contribute to the flawed decision-making in autonomous …

Risk Analysis And Mitigation Of Artificial Space Debris Near The Moon, Nathan R. Boone

Theses and Dissertations

This research evaluates the risks that could be posed by artificial space debris near the Moon and investigates potential mitigation techniques. Simulations across a wide variety of low lunar orbits found that a substantial portion of the fragments could remain in lunar orbit for at least five years and possibly as long as decades. The locations of lunar surface impacts were highly non-uniform, with significant debris impact clusters forming that could pose an increased risk to surface infrastructure at those locations. Simulations in useful cislunar orbits near the Moon found that debris was not stable in the vicinity of a …

Immersive Virtual Reality-Based Learning As A Supplement For Biomedical Engineering Labs: Challenges Faced And Lessons Learned, Ishita Tandon, Vitali Maldonado, Megan Wilkerson, Amanda Walls, Raj R. Rao, Mostafa Elsaadany

Biomedical Engineering Faculty Publications and Presentations

Introduction: Immersive virtual reality (VR) based laboratory demonstrations have been gaining traction in STEM education as they can provide virtual hands-on experience. VR can also facilitate experiential and visual learning and enhanced retention. However, several optimizations of the implementation, in-depth analyses of advantages and trade-offs of the technology, and assessment of receptivity of modern techniques in STEM education are required to ensure better utilization of VR-based labs.

Methods: In this study, we developed VR-based demonstrations for a biomolecular engineering laboratory and assessed their effectiveness using surveys containing free responses and 5-point Likert scale-based questions. Insta360 Pro2 camera and Meta Quest …

Utilization Of Caputo Fractional Derivative In Mhd Nanofluid Flow With Soret And Thermal Radiation Effects, Harshad Patel, Gopal Nanda

Applications and Applied Mathematics: An International Journal (AAM)

In existence of heat diffusion and thermal radiation, an analytical equation is found for unsteady MHD flow past an exponentially accelerating vertical plate in optically thick water based nanofluid. The governing equations are made dimensionless by similarity transformation. A definition of Caputo fractional derivative is applied to generalize governing system of partial differential equations. Laplace transform techniques are applied and obtained the analytical solutions of proposed problems. For a physical point of view, numerical results are obtained using MATLAB software and presented via graphs. From the results, it is concluded that magnetic fields tend to reduce velocity. It is also …

Spontaneous Alignment Of Myotubes Through Myogenic Progenitor Cell Migration, Lauren E. Mehanna, Adrianna R. Osborne, Charlotte A. Peterson, Brad J. Berron

Chemical and Materials Engineering Faculty Publications

In large-volume muscle injuries, widespread damage to muscle fibers and the surrounding connective tissue prevents myogenic progenitor cells (MPCs) from initiating repair. There is a clinical need to rapidly fabricate large muscle tissue constructs for integration at the site of large volume muscle injuries. Most strategies for myotube alignment require microfabricated structures or prolonged orientation times. We utilize the MPC’s natural propensity to close gaps across an injury site to guide alignment on collagen I. When MPCs are exposed to an open boundary free of cells, they migrate unidirectionally into the cell-free region and align perpendicular to the original boundary …

Sustainability Of Apparel Exporting Industry Facilities In South Asia, Sree L. Anilkuma, George H. Berghorn, M.G. Matt Syal

The Professional Constructor

The apparel industry’s contribution to the gross domestic product in South Asian countries is significant and provides livelihoods for millions of people in this region. Although this industry’s contribution towards the economy is substantial, its negative impact on the environment and the working conditions have always been critical issues of concern. The two countries of emphasis in this research, Bangladesh, and India, have experienced numerous garment factory accidents in the form of building collapses, factory fires, and boiler explosions, which have killed and injured thousands of workers. These incidents have brought attention on the need to improve poor facilities and …

Taxonomy Of Trust And Maslow’S Hierarchy Of Needsin The Construction Industry, Ann B. Lyons, Vivek Sharma, Shima Clarke

The Professional Constructor

Trust is vital in every facet of life, enabling collaborative efforts and valuing contributions from various individuals. This is particularly true in the construction industry, where teamwork is essential for success. Prior research has consistently demonstrated that heightened trust levels significantly contribute to better project outcomes and increased client satisfaction. Despite its critical role, the construction industry has yet to adopt a structured hierarchical perspective of trust that aligns with its unique demands. This study aims to fill this gap by validating a comprehensive taxonomy of trust specifically designed for the construction sector. Through literature review, this study identifies key …

Exhaust Manifold Pressure As Engine Tuning Parameter, Kieran Truth Cunningham, Adam Sullivan Mathews, Connor Richard Smullen

Mechanical Engineering

In this project, the exhaust manifold absolute pressure (EMAP) of a 1986 Toyota Corolla was analyzed across a variety of load cases and was compared with the mass air flow (MAF) of the intake, simultaneously. Correlations were found in the trends of EMAP and MAF sensor readings that may prove helpful in tuning engines that have difficulty in accommodating a MAF sensor. These correlations were found in areas of the powerband where aftermarket tuned engines typically have poor airflow sensing. An equation was developed to spoof MAF input using EMAP and other engine operating parameters.

Pitot Tube Test Bench, Jesus Perez, Zachary Owen, Adrian Lopez

Mechanical Engineering

This Final Design Review documents the senior design project carried out by a team of Mechanical Engineering students attending California Polytechnic State University, San Luis Obispo for Roger Benham, and his company Leak Control Services Inc. The requirement was to design, build, and validate the performance of a test fixture that quantifies the performance characteristics of flow rate and pressure drop of different pitot tube designs to be used in a chemical dispensing application for Mr. Benham. This document includes relevant background research on the need for the fixture as well as relevant technical research. This document also contains objectives …

Asme Electric-Human Powered Vehicle (Ehpv) Project, George Bernat, Roman Bradley, Casey Pickett, Paul Mansfield

Mechanical Engineering

This report documents the collaborative efforts of the senior design team and the Cal Poly Human Powered Vehicles Club in creating an electric-assisted human powered vehicle tailored for participation in ASME's e-HPV Spring 2024 competition. Delving into a comprehensive account of the project's lifecycle, the report outlines the iterative stages of ideation and design, the manufacturing processes, testing , and subsequent refinements undertaken by the team. Additionally, it provides analysis of the project management strategies employed, as well as an overall appraisal of successes, setbacks, and areas improvement. As a result of the project, the vehicle (shown below) was successfully …

Evaluation Of Ndot’S Sediment Barrier Practices Using Performance Data, Michael A. Perez, Wesley N. Donald, J. Blake Whitman, Brian G. Roche

Nebraska Department of Transportation: Research Reports

To protect waterways adjacent to construction projects with disturbed land, a 50 ft (15 m) vegetated buffer or equivalent sediment controls are required. However, there is little guidance on the effectiveness of vegetated buffers in removing sediment or how sediment barriers can aid shorter buffers or replace buffers. A modeling methodology was developed and used to determine the performance of 11,664 50 ft (15 m) vegetated buffer configurations with Nebraska conditions; sediment capture averaged 92.6% and ranged from 18.5% to 99.5%. To determine the performance of Nebraska Department of Transportation standard and modified sediment barrier installations, a large-scale testing methodology …

Local Strain Quantification Of A Porous Carbon Fiber Network Material, Robert N Quammen, Paul F. Rottmann

Chemical and Materials Engineering Faculty Publications

While porous materials’ wide range of attractive functional properties have led to their development for a variety of applications, their intrinsically stochastic microstructures prevent straightforward approaches to predicting their mechanical behavior. This is attributed to the mechanisms that govern the macroscale behavior of these materials operating on multiple microstructure-specific length scales spanning several orders of magnitude. The goal of this work was to experimentally observe these operative deformation mechanisms to better improve the development of mechanism-informed models that more accurately predict the behavior of these materials. In this study compression tests were conducted on a porous carbon fiber network material. …

Pcor Partnership Atlas, Wesley D. Peck, Kari Suedel, Kyle A. Glazewski, Kevin C. Connors, James A. Sorensen, Charles D. Gorecki, Brian P. Kalk, John A. Harju

EERC Maps and Infographics

The Plains CO₂ Reduction (PCOR) Partnership Atlas provides a profile of CO₂ sources and potential storage locations across the PCOR Partnership region. The revised sixth edition of the Atlas provides an up-to-date look at PCOR Partnership initiative activities, including additional regional characterization and updates on commercial projects. Additional background information on carbon capture, utilization, and storage (CCUS) is included to give a better understanding of how CCUS addresses concerns about climate change while allowing future energy needs to be met.

Reconstruction Of The Neglected: Cal Poly’S Old Powerhouse, Sophie Meier, Morgan Cuthbert, Luke Zamlich

Architectural Engineering

Cal Poly’s Old Powerhouse (BLDG 76) is the only remaining building from the original Polytechnic school left on campus. It was built in 1910 and placed on the national registry in 1993. The Powerhouse used to do exactly what its name implies, provide power to campus. After it retired from its purpose, it was used for many other use cases, particularly as a space for the College of Architecture and Environmental design. Through its time, it was used as a classroom space, pottery/creative space, a workshop, and even once contained a fishpond. The building was then abandoned in 1990, a …

Tourniquet Pressure Gradient Measurement Apparatus, Luis Enrique Perez, Elsa Elizabeth Bates

Biomedical Engineering

The goal of this project was to design a device that would measure pressure gradient data across the width of an elastic and inelastic tourniquet cuff using a human limb model. The main customer requirements that were focused on were to accurately measure the pressure from a tourniquet, keep the cost down, and be easy to use. The targeted design specifications were to read pressure values ranging from 0-400 mmHg, keep the test length under 5 minutes, and to keep the cost of materials under $400. The design of the device ended up consisting of 5 IV pouches that were …

Auto Adjustable Flow Regulator, Ethan Hemmerlin, Jack Dooley

Biomedical Engineering

The Auto-Adjustable Oxygen Flowmeter device is to be used in conjunction with an oxygen source or reservoir, as well as a low-flow nasal cannula apparatus. The device is applicable for patients requiring an oxygen flow rate of 0-6 L/min. Further, the device works to maintain a healthy blood-oxygen concentration of 90-94% for typical patients, as well as an 88-92% range for COPD patients who are chronic CO2 retainers. A reflective pulse oximeter will record the SpO2 concentration of the patient. The outputted SpO2 concentration will be transmitted to an internal processing PCB from which it will interact with the oxygen …

Soil Nitrate Prediction Using Ftir-Atr, Vis-Nir, And Raman Spectroscopy, Sabiha Ferdous

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Fourier transform infrared spectroscopy (FTIR) combined with Attenuated total reflectance (ATR), Visible-Near Infrared spectroscopy (Vis-NIR), and Raman spectroscopy (RS) are non-destructive techniques for rapid determination of nitrogen compounds in soil. Leveraging FTIR-ATR and Vis-NIR spectra using partial least squares regression (PLSR) modeling, the study aims to predict soil nitrate content and explored the feasibility of Raman spectroscopy to detect nitrate (NO₃^-), nitrite (NO₂^-), and ammonium (NH₄⁺) in soil. Soil samples were collected from four different fields, dried, sieved (2mm), and then used for collecting spectra (FTIR-ATR and Vis-NIR). Laboratory analysis was …

Techno-Economic Feasibility Of Polyhydroxybutyrate (Phb) Production From Corn Stover, Jey-R Ventura, Ruby Lynn Ventura

The Philippine Agricultural Scientist

This research evaluated the techno-economic feasibility of polyhydroxybutyrate (PHB) production using corn stover as a substrate for the fermentation process. The target PHB plant production was set at 1000 t PHB per yr, with a daily production of about 3 t PHB. The required corn stover biomass was around 12 000 t per yr. The economic analysis of this study suggested that 91.13 M US$ is needed to put up the targeted plant production capacity, with 94% of the total investment to be allotted to the direct fixed capital cost. Annual operating cost was rated at 4.71 M US$ per …

Optimization Of Factors Affecting The Performance Of A Fluidized Bed Dryer, Soner Celen, Sultan Pektas

The Philippine Agricultural Scientist

This study investigated the theoretical, analytical, and experimental effects of parameters such as bed height, air velocity, and air temperature on drying using a fluidized bed dryer. The objective was to examine how these parameters influence the drying process of salt products in a pilot fluidized bed dryer and establish the foundation for the development of a future full-scale machine. Salt products with an initial moisture content of 3% were used in all experimental trials. The pressure drop was determined by calculating the minimum fluidization rate, Archimedes and Reynolds number. The calculated values were compared with the analyses conducted using …